Added missing shutdown_user() hook (#9180)

* add missing shutdown_user()

* use reset_keyboard() from quantum

Makefile

@@ -294,8 +294,8 @@ define PARSE_RULE
         $$(info |  QMK's make format recently changed to use folder locations and colons:)
         $$(info |     make project_folder:keymap[:target])
         $$(info |  Examples:)
-        $$(info |     make planck/rev4:default:dfu)
-        $$(info |     make planck:default)
+        $$(info |     make dz60:default)
+        $$(info |     make planck/rev6:default:flash)
         $$(info |)
     endif
 endef

Vagrantfile

@@ -89,7 +89,7 @@ Vagrant.configure(2) do |config|
 
   Examples:
      make planck/rev4:default:dfu
-     make planck:default
+     make planck/rev4:default
 
   EOT
 end

docs/_summary.md

@@ -34,7 +34,9 @@
     * [Customizing Functionality](custom_quantum_functions.md)
     * [Driver Installation with Zadig](driver_installation_zadig.md)
     * [Keymap Overview](keymap.md)
-    * [Vagrant Guide](getting_started_vagrant.md)
+    * Development Environments
+      * [Docker Guide](getting_started_docker.md)
+      * [Vagrant Guide](getting_started_vagrant.md)
     * Flashing
       * [Flashing](flashing.md)
       * [Flashing ATmega32A (ps2avrgb)](flashing_bootloadhid.md)
@@ -126,6 +128,7 @@
       * [SPI Driver](spi_driver.md)
       * [WS2812 Driver](ws2812_driver.md)
       * [EEPROM Driver](eeprom_driver.md)
+      * ['serial' Driver](serial_driver.md)
     * [GPIO Controls](internals_gpio_control.md)
     * [Keyboard Guidelines](hardware_keyboard_guidelines.md)
 

docs/feature_pointing_device.md

@@ -27,20 +27,17 @@ In the following example, a custom key is used to click the mouse and scroll 127
 
 ```c
 case MS_SPECIAL:
-	report_mouse_t currentReport = pointing_device_get_report();
-    if (record->event.pressed)
-    {
+    report_mouse_t currentReport = pointing_device_get_report();
+    if (record->event.pressed) {
         currentReport.v = 127;
-		currentReport.h = 127;
-		currentReport.buttons |= MOUSE_BTN1; //this is defined in report.h
-    }
-    else
-    {
+        currentReport.h = 127;
+        currentReport.buttons |= MOUSE_BTN1;  // this is defined in report.h
+    } else {
         currentReport.v = -127;
         currentReport.h = -127;
         currentReport.buttons &= ~MOUSE_BTN1;
     }
-	pointing_device_set_report(currentReport);
+    pointing_device_set_report(currentReport);
     break;
 ```
 

docs/feature_rawhid.md

@@ -44,7 +44,11 @@ To connect your host computer to your keyboard with raw HID you need four pieces
 3. Usage Page
 4. Usage
 
-The first two can easily be found in your keyboard's `config.h` in the keyboard's main directory under `VENDOR_ID` and `PRODUCT_ID`. **Usage Page** is **`0xFF60`** and **Usage** is **`0x0061`**.
+The first two can easily be found in your keyboard's `config.h` in the keyboard's main directory under `VENDOR_ID` and `PRODUCT_ID`.
+
+The final two can be overridden in your keyboard's `config.h` in the keyboard's main directory by redefining the values: `#define RAW_USAGE_PAGE 0xFF60` and `#define RAW_USAGE_ID 0x61`.
+
+By default, **Usage Page** is `0xFF60` and **Usage** is `0x61`.
 
 ### Building your host
 

docs/feature_split_keyboard.md

@@ -8,9 +8,20 @@ QMK Firmware has a generic implementation that is usable by any board, as well a
 
 For this, we will mostly be talking about the generic implementation used by the Let's Split and other keyboards. 
 
-!> ARM is not yet supported for Split Keyboards.  Progress is being made, but we are not quite there, yet. 
+!> ARM is not yet fully supported for Split Keyboards and has many limitations. Progress is being made, but we have not yet reached 100% feature parity.
 
 
+## Compatibility Overview
+
+| Transport                    | AVR                | ARM                |
+|------------------------------|--------------------|--------------------|
+| ['serial'](serial_driver.md) | :heavy_check_mark: | :white_check_mark: <sup>1</sup> |
+| I2C                          | :heavy_check_mark: |                    |
+
+Notes:
+
+1. Both hardware and software limitations are detailed within the [driver documentation](serial_driver.md).
+
 ## Hardware Configuration
 
 This assumes that you're using two Pro Micro-compatible controllers, and are using TRRS jacks to connect to two halves. 

docs/getting_started_docker.md

@@ -0,0 +1,47 @@
+# Docker Quick Start
+
+This project includes a Docker workflow that will allow you to build a new firmware for your keyboard very easily without major changes to your primary operating system. This also ensures that when you clone the project and perform a build, you have the exact same environment as anyone else and the QMK build infrastructure. This makes it much easier for people to help you troubleshoot any issues you encounter.
+
+## Requirements
+
+The main prerequisite is a working `docker` install.
+* [Docker CE](https://docs.docker.com/install/#supported-platforms)
+
+## Usage
+
+Acquire a local copy of the QMK's repository (including submodules):
+
+```bash
+git clone --recurse-submodules https://github.com/qmk/qmk_firmware.git
+cd qmk_firmware
+```
+
+Run the following command to build a keymap:
+```bash
+util/docker_build.sh <keyboard>:<keymap>
+# For example: util/docker_build.sh planck/rev6:default
+```
+
+This will compile the desired keyboard/keymap and leave the resulting `.hex` or `.bin` file in the QMK directory for you to flash. If `:keymap` is omitted, all keymaps are used. Note that the parameter format is the same as when building with `make`.
+
+There is also support for building _and_ flashing the keyboard straight from Docker by specifying the `target` as well:
+
+```bash
+util/docker_build.sh keyboard:keymap:target
+# For example: util/docker_build.sh planck/rev6:default:flash
+```
+
+You can also start the script without any parameters, in which case it will ask you to input the build parameters one by one, which you may find easier to use:
+
+```bash
+util/docker_build.sh
+# Reads parameters as input (leave blank for all keyboards/keymaps)
+```
+
+## FAQ
+
+### Why can't I flash on Windows/macOS
+
+On Windows and macOS, it requires [Docker Machine](http://gw.tnode.com/docker/docker-machine-with-usb-support-on-windows-macos/) to be running. This is tedious to set up, so it's not recommended; use [QMK Toolbox](https://github.com/qmk/qmk_toolbox) instead.
+
+!> Docker for Windows requires [Hyper-V](https://docs.microsoft.com/en-us/virtualization/hyper-v-on-windows/quick-start/enable-hyper-v) to be enabled. This means that it cannot work on versions of Windows which don't have Hyper-V, such as Windows 7, Windows 8 and **Windows 10 Home**.

docs/newbs_flashing.md

@@ -1,18 +1,41 @@
-# Flashing Your Keyboard 
+# Flashing Your Keyboard
 
-Now that you've built a custom firmware file you'll want to flash your keyboard. 
+Now that you've built a custom firmware file you'll want to flash your keyboard.
+
+## Put Your Keyboard into DFU (Bootloader) Mode
+
+In order to flash your custom firmware you must first put your keyboard into a special flashing mode. While it is in this mode you will not be able to type or otherwise use your keyboard. It is very important that you do not unplug the keyboard or otherwise interrupt the flashing process while the firmware is being written.
+
+Different keyboards have different ways to enter this special mode. If your PCB currently runs QMK, TMK, or PS2AVRGB (Bootmapper Client) and you have not been given specific instructions, try the following, in order:
+
+* Hold down both shift keys and press `Pause`
+* Hold down both shift keys and press `B`
+* Unplug your keyboard, hold down the Spacebar and `B` at the same time, plug in your keyboard and wait a second before releasing the keys
+* Unplug your keyboard, hold down the top or bottom left key (usually Escape or Left Control) and plug in your keyboard
+* Press the physical `RESET` button, usually located on the underside of the PCB
+* Locate header pins on the PCB labeled `RESET` and `GND`, and short them together while plugging your PCB in
+
+If you've attempted all of the above to no avail, and the main chip on the board says `STM32` on it, this may be a bit more complicated. Generally your best bet is to ask on [Discord](https://discord.gg/Uq7gcHh) for assistance. It's likely some photos of the board will be asked for -- if you can get them ready beforehand it'll help move things along!
+
+Otherwise, you should see a message in yellow, similar to this in QMK Toolbox:
+
+```
+*** DFU device connected: Atmel Corp. ATmega32U4 (03EB:2FF4:0000)
+```
+
+and this bootloader device will also be present in Device Manager, System Information.app, or `lsusb`.
 
 ## Flashing Your Keyboard with QMK Toolbox
 
-The simplest way to flash your keyboard will be with the [QMK Toolbox](https://github.com/qmk/qmk_toolbox/releases). 
+The simplest way to flash your keyboard will be with the [QMK Toolbox](https://github.com/qmk/qmk_toolbox/releases).
 
-However, the QMK Toolbox is only available for Windows and macOS currently.  If you're using Linux (or just wish to flash the firmware from the command line), proceed down to [Flash Your Keyboard From The Command Line](#flash-your-keyboard-from-the-command-line).
+However, the Toolbox is currently only available for Windows and macOS. If you're using Linux (or just wish to flash the firmware from the command line), skip to the [Flash your Keyboard from the Command Line](#flash-your-keyboard-from-the-command-line) section.
 
-### Load The File Into QMK Toolbox
+### Load the File into QMK Toolbox
 
 Begin by opening the QMK Toolbox application. You'll want to locate the firmware file in Finder or Explorer. Your keyboard firmware may be in one of two formats- `.hex` or `.bin`. QMK tries to copy the appropriate one for your keyboard into the root `qmk_firmware` directory.
 
-If you are on Windows or macOS there are commands you can use to easily open the current firmware folder in Explorer or Finder.
+If you are on Windows or macOS, there are commands you can use to easily open the current folder in Explorer or Finder.
 
 #### Windows
 
@@ -38,65 +61,44 @@ For example, the `planck/rev5` with a `default` keymap will have this filename:
 planck_rev5_default.hex
 ```
 
-Once you have located your firmware file drag it into the "Local file" box in QMK Toolbox, or click "Open" and navigate to where your firmware file is stored. 
-
-### Put Your Keyboard Into DFU (Bootloader) Mode
-
-In order to flash your custom firmware you have to put your keyboard into a special flashing mode. While it is in this mode you will not be able to type or otherwise use your keyboard. It is very important that you do not unplug your keyboard or otherwise interrupt the flashing process while the firmware is being written.
-
-Different keyboards have different ways to enter this special mode. If your PCB currently runs QMK or TMK and you have not been given specific instructions try the following, in order:
-
-* Hold down both shift keys and press `Pause`
-* Hold down both shift keys and press `B`
-* Unplug your keyboard, hold down the Spacebar and `B` at the same time, plug in your keyboard and wait a second before releasing the keys
-* Press the physical `RESET` button on the bottom of the PCB
-* Locate header pins on the PCB labeled `BOOT0` or `RESET`, short those together while plugging your PCB in
-
-When you are successful you will see a message similar to this in QMK Toolbox:
-
-```
-*** Clueboard - Clueboard 66% HotSwap disconnected -- 0xC1ED:0x2390
-*** DFU device connected
-```
+Once you have located your firmware file drag it into the "Local file" box in QMK Toolbox, or click "Open" and navigate to where your firmware file is stored.
 
 ### Flash Your Keyboard
 
 Click the `Flash` button in QMK Toolbox. You will see output similar to the following:
 
 ```
-*** Clueboard - Clueboard 66% HotSwap disconnected -- 0xC1ED:0x2390
-*** DFU device connected
+*** DFU device connected: Atmel Corp. ATmega32U4 (03EB:2FF4:0000)
 *** Attempting to flash, please don't remove device
->>> dfu-programmer atmega32u4 erase --force
+>>> dfu-programmer.exe atmega32u4 erase --force
     Erasing flash...  Success
     Checking memory from 0x0 to 0x6FFF...  Empty.
->>> dfu-programmer atmega32u4 flash /Users/skully/qmk_firmware/clueboard_66_hotswap_gen1_skully.hex
-    Checking memory from 0x0 to 0x55FF...  Empty.
-    0%                            100%  Programming 0x5600 bytes...
+>>> dfu-programmer.exe atmega32u4 flash "D:\Git\qmk_firmware\gh60_satan_default.hex"
+    Checking memory from 0x0 to 0x3F7F...  Empty.
+    0%                            100%  Programming 0x3F80 bytes...
     [>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>]  Success
     0%                            100%  Reading 0x7000 bytes...
     [>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>]  Success
     Validating...  Success
-    0x5600 bytes written into 0x7000 bytes memory (76.79%).
->>> dfu-programmer atmega32u4 reset
+    0x3F80 bytes written into 0x7000 bytes memory (56.70%).
+>>> dfu-programmer.exe atmega32u4 reset
     
-*** DFU device disconnected
-*** Clueboard - Clueboard 66% HotSwap connected -- 0xC1ED:0x2390
+*** DFU device disconnected: Atmel Corp: ATmega32U4 (03EB:2FF4:0000)
 ```
 
 ## Flash your Keyboard from the Command Line
 
-This has been made pretty simple compared to what it used to be.  When you are ready to compile and flash your firmware, open up your terminal window and run the flash command: 
+This has been made pretty simple compared to what it used to be. When you are ready to compile and flash your firmware, open up your terminal window and run the flash command:
 
     qmk flash
 
-If you have not configured your keyboard/keymap name, or you have multiple keyboards, you can specify the keyboard and keymap:
+If you have not configured your keyboard/keymap name in the CLI, or you have multiple keyboards, you can specify the keyboard and keymap:
 
     qmk flash -kb <my_keyboard> -km <my_keymap>
 
-This will check the keyboard's configuration, and then attempt to flash it based on the specified bootloader.  This means that you don't need to know which bootloader that your keyboard uses.  Just run the command, and let the command do the heavy lifting.
+This will check the keyboard's configuration, and then attempt to flash it based on the specified bootloader. This means that you don't need to know which bootloader that your keyboard uses. Just run the command, and let the command do the heavy lifting.
 
-However, this does rely on the bootloader being set by the keyboard.  If this information is not configured, or you're using a board that doesn't have a supported target to flash it, you will see this error:
+However, this does rely on the bootloader being set by the keyboard. If this information is not configured, or you're using a board that doesn't have a supported target to flash it, you will see this error:
 
     WARNING: This board's bootloader is not specified or is not supported by the ":flash" target at this time.
 

docs/newbs_getting_started.md

@@ -69,10 +69,21 @@ You will need to install Git and Python. It's very likely that you already have
 * Fedora / Red Hat / CentOS: `sudo yum install git python3 python3-pip`
 * Arch / Manjaro: `sudo pacman -S git python python-pip python-setuptools libffi`
 
-
 Install the global CLI to bootstrap your system:
 
-  `python3 -m pip install --user qmk` (on Arch-based distros you can also try the `qmk` package from AUR (**note**: it's maintained by a community member): `yay -S qmk`)
+`python3 -m pip install --user qmk` (on Arch-based distros you can also try the `qmk` package from AUR (**note**: it's maintained by a community member): `yay -S qmk`)
+
+### FreeBSD
+
+You will need to install Git and Python. It's possible that you already have both, but if not, run the following commands to install them:
+
+    pkg install git python3
+
+Make sure that `$HOME/.local/bin` is added to your `$PATH` so that locally install Python packages are available.
+
+Once installed, you can install QMK CLI:
+
+    python3 -m pip install --user qmk
 
 ## 3. Run QMK Setup :id=set-up-qmk
 
@@ -88,6 +99,12 @@ This is due to a [bug](https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=839155)
 Sadly, Ubuntu reitroduced this bug and is [yet to fix it](https://bugs.launchpad.net/ubuntu/+source/bash/+bug/1588562).
 Luckily, the fix is easy. Run this as your user: `echo "PATH=$HOME/.local/bin:$PATH" >> $HOME/.bashrc && source $HOME/.bashrc`
 
+?>**Note on FreeBSD**:
+It is suggested to run `qmk setup` as a non-`root` user to start with, but this will likely identify packages that need to be installed to your
+base system using `pkg`. However the installation will probably fail when run as an unprivileged user.
+To manually install the base dependencies, run `./util/qmk_install.sh` either as `root`, or with `sudo`.
+Once that completes, re-run `qmk setup` to complete the setup and checks.
+
 ?> If you already know [how to use GitHub](getting_started_github.md), we recommend that you create your own fork and use `qmk setup <github_username>/qmk_firmware` to clone your personal fork. If you don't know what that means you can safely ignore this message.
 
 ## 4. Test Your Build Environment

docs/proton_c_conversion.md

@@ -36,7 +36,7 @@ These are defaults based on what has been implemented for ARM boards.
 | [RGB Lighting](feature_rgblight.md) | Disabled                                                                                                         |
 | [Backlight](feature_backlight.md)   | Forces [task driven PWM](feature_backlight.md#software-pwm-driver) until ARM can provide automatic configuration |
 | USB Host (e.g. USB-USB converter)   | Not supported (USB host code is AVR specific and is not currently supported on ARM)                              |
-| [Split keyboards](feature_split_keyboard.md) | Not supported yet                                                                                       |
+| [Split keyboards](feature_split_keyboard.md) | Partial - heavily dependent on enabled features                                                         |
 
 ## Manual Conversion
 

docs/serial_driver.md

@@ -0,0 +1,69 @@
+# 'serial' Driver
+This driver powers the [Split Keyboard](feature_split_keyboard.md) feature.
+
+?> Serial in this context should be read as **sending information one bit at a time**, rather than implementing UART/USART/RS485/RS232 standards.
+
+All drivers in this category have the following characteristics:
+* Provides data and signaling over a single conductor
+* Limited to single master, single slave
+
+## Supported Driver Types
+
+|                   | AVR                | ARM                |
+|-------------------|--------------------|--------------------|
+| bit bang          | :heavy_check_mark: | :heavy_check_mark: |
+| USART Half-duplex |                    | :heavy_check_mark: |
+
+## Driver configuration
+
+### Bitbang
+Default driver, the absence of configuration assumes this driver. To configure it, add this to your rules.mk:
+
+```make
+SERIAL_DRIVER = bitbang
+```
+
+Configure the driver via your config.h:
+```c
+#define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
+#define SELECT_SOFT_SERIAL_SPEED 1 // or 0, 2, 3, 4, 5
+                                   //  0: about 189kbps (Experimental only)
+                                   //  1: about 137kbps (default)
+                                   //  2: about 75kbps
+                                   //  3: about 39kbps
+                                   //  4: about 26kbps
+                                   //  5: about 20kbps
+```
+
+#### ARM
+
+!> The bitbang driver causes connection issues with bitbang WS2812 driver
+
+Along with the generic options above, you must also turn on the `PAL_USE_CALLBACKS` feature in your halconf.h.
+
+### USART Half-duplex
+Targeting STM32 boards where communication is offloaded to a USART hardware device. The advantage is that this provides fast and accurate timings. `SOFT_SERIAL_PIN` for this driver is the configured USART TX pin. **The TX pin must have appropriate pull-up resistors**. To configure it, add this to your rules.mk:
+
+```make
+SERIAL_DRIVER = usart
+```
+
+Configure the hardware via your config.h:
+```c
+#define SOFT_SERIAL_PIN B6  // USART TX pin
+#define SELECT_SOFT_SERIAL_SPEED 1 // or 0, 2, 3, 4, 5
+                                   //  0: about 460800 baud
+                                   //  1: about 230400 baud (default)
+                                   //  2: about 115200 baud
+                                   //  3: about 57600 baud
+                                   //  4: about 38400 baud
+                                   //  5: about 19200 baud
+#define SERIAL_USART_DRIVER SD1 // USART driver of TX pin. default: SD1
+#define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
+```
+
+You must also enable the ChibiOS `SERIAL` feature:
+* In your board's halconf.h: `#define HAL_USE_SERIAL TRUE`
+* In your board's mcuconf.h: `#define STM32_SERIAL_USE_USARTn TRUE` (where 'n' matches the peripheral number of your selected USART on the MCU)
+
+Do note that the configuration required is for the `SERIAL` peripheral, not the `UART` peripheral.

drivers/chibios/serial.c

@@ -0,0 +1,290 @@
+/*
+ * WARNING: be careful changing this code, it is very timing dependent
+ */
+
+#include "quantum.h"
+#include "serial.h"
+#include "wait.h"
+
+#include "hal.h"
+
+// TODO: resolve/remove build warnings
+#if defined(RGBLIGHT_ENABLE) && defined(RGBLED_SPLIT) && defined(PROTOCOL_CHIBIOS) && defined(WS2812_DRIVER_BITBANG)
+#    warning "RGBLED_SPLIT not supported with bitbang WS2812 driver"
+#endif
+
+// default wait implementation cannot be called within interrupt
+//   this method seems to be more accurate than GPT timers
+#if PORT_SUPPORTS_RT == FALSE
+#    error "chSysPolledDelayX method not supported on this platform"
+#else
+#    undef wait_us
+#    define wait_us(x) chSysPolledDelayX(US2RTC(STM32_SYSCLK, x))
+#endif
+
+#ifndef SELECT_SOFT_SERIAL_SPEED
+#    define SELECT_SOFT_SERIAL_SPEED 1
+// TODO: correct speeds...
+//  0: about 189kbps (Experimental only)
+//  1: about 137kbps (default)
+//  2: about 75kbps
+//  3: about 39kbps
+//  4: about 26kbps
+//  5: about 20kbps
+#endif
+
+// Serial pulse period in microseconds. At the moment, going lower than 12 causes communication failure
+#if SELECT_SOFT_SERIAL_SPEED == 0
+#    define SERIAL_DELAY 12
+#elif SELECT_SOFT_SERIAL_SPEED == 1
+#    define SERIAL_DELAY 16
+#elif SELECT_SOFT_SERIAL_SPEED == 2
+#    define SERIAL_DELAY 24
+#elif SELECT_SOFT_SERIAL_SPEED == 3
+#    define SERIAL_DELAY 32
+#elif SELECT_SOFT_SERIAL_SPEED == 4
+#    define SERIAL_DELAY 48
+#elif SELECT_SOFT_SERIAL_SPEED == 5
+#    define SERIAL_DELAY 64
+#else
+#    error invalid SELECT_SOFT_SERIAL_SPEED value
+#endif
+
+inline static void serial_delay(void) { wait_us(SERIAL_DELAY); }
+inline static void serial_delay_half(void) { wait_us(SERIAL_DELAY / 2); }
+inline static void serial_delay_blip(void) { wait_us(1); }
+inline static void serial_output(void) { setPinOutput(SOFT_SERIAL_PIN); }
+inline static void serial_input(void) { setPinInputHigh(SOFT_SERIAL_PIN); }
+inline static bool serial_read_pin(void) { return !!readPin(SOFT_SERIAL_PIN); }
+inline static void serial_low(void) { writePinLow(SOFT_SERIAL_PIN); }
+inline static void serial_high(void) { writePinHigh(SOFT_SERIAL_PIN); }
+
+void interrupt_handler(void *arg);
+
+// Use thread + palWaitLineTimeout instead of palSetLineCallback
+//  - Methods like setPinOutput and palEnableLineEvent/palDisableLineEvent
+//    cause the interrupt to lock up, which would limit to only receiving data...
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+    (void)arg;
+    chRegSetThreadName("blinker");
+    while (true) {
+        palWaitLineTimeout(SOFT_SERIAL_PIN, TIME_INFINITE);
+        interrupt_handler(NULL);
+    }
+}
+
+static SSTD_t *Transaction_table      = NULL;
+static uint8_t Transaction_table_size = 0;
+
+void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size) {
+    Transaction_table      = sstd_table;
+    Transaction_table_size = (uint8_t)sstd_table_size;
+
+    serial_output();
+    serial_high();
+}
+
+void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size) {
+    Transaction_table      = sstd_table;
+    Transaction_table_size = (uint8_t)sstd_table_size;
+
+    serial_input();
+
+    palEnablePadEvent(PAL_PORT(SOFT_SERIAL_PIN), PAL_PAD(SOFT_SERIAL_PIN), PAL_EVENT_MODE_FALLING_EDGE);
+    chThdCreateStatic(waThread1, sizeof(waThread1), HIGHPRIO, Thread1, NULL);
+}
+
+// Used by the master to synchronize timing with the slave.
+static void __attribute__((noinline)) sync_recv(void) {
+    serial_input();
+    // This shouldn't hang if the slave disconnects because the
+    // serial line will float to high if the slave does disconnect.
+    while (!serial_read_pin()) {
+    }
+
+    serial_delay();
+}
+
+// Used by the slave to send a synchronization signal to the master.
+static void __attribute__((noinline)) sync_send(void) {
+    serial_output();
+
+    serial_low();
+    serial_delay();
+
+    serial_high();
+}
+
+// Reads a byte from the serial line
+static uint8_t __attribute__((noinline)) serial_read_byte(void) {
+    uint8_t byte = 0;
+    serial_input();
+    for (uint8_t i = 0; i < 8; ++i) {
+        byte = (byte << 1) | serial_read_pin();
+        serial_delay();
+    }
+
+    return byte;
+}
+
+// Sends a byte with MSB ordering
+static void __attribute__((noinline)) serial_write_byte(uint8_t data) {
+    uint8_t b = 8;
+    serial_output();
+    while (b--) {
+        if (data & (1 << b)) {
+            serial_high();
+        } else {
+            serial_low();
+        }
+        serial_delay();
+    }
+}
+
+// interrupt handle to be used by the slave device
+void interrupt_handler(void *arg) {
+    chSysLockFromISR();
+
+    sync_send();
+
+    // read mid pulses
+    serial_delay_blip();
+
+    uint8_t checksum_computed = 0;
+    int     sstd_index        = 0;
+
+#ifdef SERIAL_USE_MULTI_TRANSACTION
+    sstd_index = serial_read_byte();
+    sync_send();
+#endif
+
+    SSTD_t *trans = &Transaction_table[sstd_index];
+    for (int i = 0; i < trans->initiator2target_buffer_size; ++i) {
+        trans->initiator2target_buffer[i] = serial_read_byte();
+        sync_send();
+        checksum_computed += trans->initiator2target_buffer[i];
+    }
+    checksum_computed ^= 7;
+    uint8_t checksum_received = serial_read_byte();
+    sync_send();
+
+    // wait for the sync to finish sending
+    serial_delay();
+
+    uint8_t checksum = 0;
+    for (int i = 0; i < trans->target2initiator_buffer_size; ++i) {
+        serial_write_byte(trans->target2initiator_buffer[i]);
+        sync_send();
+        serial_delay_half();
+        checksum += trans->target2initiator_buffer[i];
+    }
+    serial_write_byte(checksum ^ 7);
+    sync_send();
+
+    // wait for the sync to finish sending
+    serial_delay();
+
+    *trans->status = (checksum_computed == checksum_received) ? TRANSACTION_ACCEPTED : TRANSACTION_DATA_ERROR;
+
+    // end transaction
+    serial_input();
+
+    // TODO: remove extra delay between transactions
+    serial_delay();
+
+    chSysUnlockFromISR();
+}
+
+/////////
+//  start transaction by initiator
+//
+// int  soft_serial_transaction(int sstd_index)
+//
+// Returns:
+//    TRANSACTION_END
+//    TRANSACTION_NO_RESPONSE
+//    TRANSACTION_DATA_ERROR
+// this code is very time dependent, so we need to disable interrupts
+#ifndef SERIAL_USE_MULTI_TRANSACTION
+int soft_serial_transaction(void) {
+    int sstd_index = 0;
+#else
+int soft_serial_transaction(int sstd_index) {
+#endif
+
+    if (sstd_index > Transaction_table_size) return TRANSACTION_TYPE_ERROR;
+    SSTD_t *trans = &Transaction_table[sstd_index];
+
+    // TODO: remove extra delay between transactions
+    serial_delay();
+
+    // this code is very time dependent, so we need to disable interrupts
+    chSysLock();
+
+    // signal to the slave that we want to start a transaction
+    serial_output();
+    serial_low();
+    serial_delay_blip();
+
+    // wait for the slaves response
+    serial_input();
+    serial_high();
+    serial_delay();
+
+    // check if the slave is present
+    if (serial_read_pin()) {
+        // slave failed to pull the line low, assume not present
+        dprintf("serial::NO_RESPONSE\n");
+        chSysUnlock();
+        return TRANSACTION_NO_RESPONSE;
+    }
+
+    // if the slave is present syncronize with it
+
+    uint8_t checksum = 0;
+    // send data to the slave
+#ifdef SERIAL_USE_MULTI_TRANSACTION
+    serial_write_byte(sstd_index);  // first chunk is transaction id
+    sync_recv();
+#endif
+    for (int i = 0; i < trans->initiator2target_buffer_size; ++i) {
+        serial_write_byte(trans->initiator2target_buffer[i]);
+        sync_recv();
+        checksum += trans->initiator2target_buffer[i];
+    }
+    serial_write_byte(checksum ^ 7);
+    sync_recv();
+
+    serial_delay();
+    serial_delay();  // read mid pulses
+
+    // receive data from the slave
+    uint8_t checksum_computed = 0;
+    for (int i = 0; i < trans->target2initiator_buffer_size; ++i) {
+        trans->target2initiator_buffer[i] = serial_read_byte();
+        sync_recv();
+        checksum_computed += trans->target2initiator_buffer[i];
+    }
+    checksum_computed ^= 7;
+    uint8_t checksum_received = serial_read_byte();
+
+    sync_recv();
+    serial_delay();
+
+    if ((checksum_computed) != (checksum_received)) {
+        dprintf("serial::FAIL[%u,%u,%u]\n", checksum_computed, checksum_received, sstd_index);
+        serial_output();
+        serial_high();
+
+        chSysUnlock();
+        return TRANSACTION_DATA_ERROR;
+    }
+
+    // always, release the line when not in use
+    serial_high();
+    serial_output();
+
+    chSysUnlock();
+    return TRANSACTION_END;
+}

drivers/chibios/serial.h

@@ -0,0 +1,62 @@
+#pragma once
+
+#include <stdbool.h>
+
+// /////////////////////////////////////////////////////////////////
+// Need Soft Serial defines in config.h
+// /////////////////////////////////////////////////////////////////
+// ex.
+//  #define SOFT_SERIAL_PIN ??   // ?? = D0,D1,D2,D3,E6
+//  OPTIONAL: #define SELECT_SOFT_SERIAL_SPEED ? // ? = 1,2,3,4,5
+//                                               //  1: about 137kbps (default)
+//                                               //  2: about 75kbps
+//                                               //  3: about 39kbps
+//                                               //  4: about 26kbps
+//                                               //  5: about 20kbps
+//
+// //// USE simple API (using signle-type transaction function)
+//   /* nothing */
+// //// USE flexible API (using multi-type transaction function)
+//   #define SERIAL_USE_MULTI_TRANSACTION
+//
+// /////////////////////////////////////////////////////////////////
+
+// Soft Serial Transaction Descriptor
+typedef struct _SSTD_t {
+    uint8_t *status;
+    uint8_t  initiator2target_buffer_size;
+    uint8_t *initiator2target_buffer;
+    uint8_t  target2initiator_buffer_size;
+    uint8_t *target2initiator_buffer;
+} SSTD_t;
+#define TID_LIMIT(table) (sizeof(table) / sizeof(SSTD_t))
+
+// initiator is transaction start side
+void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size);
+// target is interrupt accept side
+void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size);
+
+// initiator result
+#define TRANSACTION_END 0
+#define TRANSACTION_NO_RESPONSE 0x1
+#define TRANSACTION_DATA_ERROR 0x2
+#define TRANSACTION_TYPE_ERROR 0x4
+#ifndef SERIAL_USE_MULTI_TRANSACTION
+int soft_serial_transaction(void);
+#else
+int soft_serial_transaction(int sstd_index);
+#endif
+
+// target status
+// *SSTD_t.status has
+//   initiator:
+//       TRANSACTION_END
+//    or TRANSACTION_NO_RESPONSE
+//    or TRANSACTION_DATA_ERROR
+//   target:
+//       TRANSACTION_DATA_ERROR
+//    or TRANSACTION_ACCEPTED
+#define TRANSACTION_ACCEPTED 0x8
+#ifdef SERIAL_USE_MULTI_TRANSACTION
+int soft_serial_get_and_clean_status(int sstd_index);
+#endif

drivers/chibios/serial_usart.c

@@ -0,0 +1,234 @@
+#include "quantum.h"
+#include "serial.h"
+#include "printf.h"
+
+#include "ch.h"
+#include "hal.h"
+
+#ifndef USART_CR1_M0
+#    define USART_CR1_M0 USART_CR1_M  // some platforms (f1xx) dont have this so
+#endif
+
+#ifndef USE_GPIOV1
+// The default PAL alternate modes are used to signal that the pins are used for USART
+#    ifndef SERIAL_USART_TX_PAL_MODE
+#        define SERIAL_USART_TX_PAL_MODE 7
+#    endif
+#endif
+
+#ifndef SERIAL_USART_DRIVER
+#    define SERIAL_USART_DRIVER SD1
+#endif
+
+#ifndef SERIAL_USART_CR1
+#    define SERIAL_USART_CR1 (USART_CR1_PCE | USART_CR1_PS | USART_CR1_M0)  // parity enable, odd parity, 9 bit length
+#endif
+
+#ifndef SERIAL_USART_CR2
+#    define SERIAL_USART_CR2 (USART_CR2_STOP_1)  // 2 stop bits
+#endif
+
+#ifndef SERIAL_USART_CR3
+#    define SERIAL_USART_CR3 0
+#endif
+
+#ifdef SOFT_SERIAL_PIN
+#    define SERIAL_USART_TX_PIN SOFT_SERIAL_PIN
+#endif
+
+#ifndef SELECT_SOFT_SERIAL_SPEED
+#    define SELECT_SOFT_SERIAL_SPEED 1
+#endif
+
+#ifdef SERIAL_USART_SPEED
+// Allow advanced users to directly set SERIAL_USART_SPEED
+#elif SELECT_SOFT_SERIAL_SPEED == 0
+#    define SERIAL_USART_SPEED 460800
+#elif SELECT_SOFT_SERIAL_SPEED == 1
+#    define SERIAL_USART_SPEED 230400
+#elif SELECT_SOFT_SERIAL_SPEED == 2
+#    define SERIAL_USART_SPEED 115200
+#elif SELECT_SOFT_SERIAL_SPEED == 3
+#    define SERIAL_USART_SPEED 57600
+#elif SELECT_SOFT_SERIAL_SPEED == 4
+#    define SERIAL_USART_SPEED 38400
+#elif SELECT_SOFT_SERIAL_SPEED == 5
+#    define SERIAL_USART_SPEED 19200
+#else
+#    error invalid SELECT_SOFT_SERIAL_SPEED value
+#endif
+
+#define TIMEOUT 100
+#define HANDSHAKE_MAGIC 7
+
+static inline msg_t sdWriteHalfDuplex(SerialDriver* driver, uint8_t* data, uint8_t size) {
+    msg_t ret = sdWrite(driver, data, size);
+
+    // Half duplex requires us to read back the data we just wrote - just throw it away
+    uint8_t dump[size];
+    sdRead(driver, dump, size);
+
+    return ret;
+}
+#undef sdWrite
+#define sdWrite sdWriteHalfDuplex
+
+static inline msg_t sdWriteTimeoutHalfDuplex(SerialDriver* driver, uint8_t* data, uint8_t size, uint32_t timeout) {
+    msg_t ret = sdWriteTimeout(driver, data, size, timeout);
+
+    // Half duplex requires us to read back the data we just wrote - just throw it away
+    uint8_t dump[size];
+    sdReadTimeout(driver, dump, size, timeout);
+
+    return ret;
+}
+#undef sdWriteTimeout
+#define sdWriteTimeout sdWriteTimeoutHalfDuplex
+
+static inline void sdClear(SerialDriver* driver) {
+    while (sdGetTimeout(driver, TIME_IMMEDIATE) != MSG_TIMEOUT) {
+        // Do nothing with the data
+    }
+}
+
+static SerialConfig sdcfg = {
+    (SERIAL_USART_SPEED),  // speed - mandatory
+    (SERIAL_USART_CR1),    // CR1
+    (SERIAL_USART_CR2),    // CR2
+    (SERIAL_USART_CR3)     // CR3
+};
+
+void handle_soft_serial_slave(void);
+
+/*
+ * This thread runs on the slave and responds to transactions initiated
+ * by the master
+ */
+static THD_WORKING_AREA(waSlaveThread, 2048);
+static THD_FUNCTION(SlaveThread, arg) {
+    (void)arg;
+    chRegSetThreadName("slave_transport");
+
+    while (true) {
+        handle_soft_serial_slave();
+    }
+}
+
+__attribute__((weak)) void usart_init(void) {
+#if defined(USE_GPIOV1)
+    palSetLineMode(SERIAL_USART_TX_PIN, PAL_MODE_STM32_ALTERNATE_OPENDRAIN);
+#else
+    palSetLineMode(SERIAL_USART_TX_PIN, PAL_MODE_ALTERNATE(SERIAL_USART_TX_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
+#endif
+}
+
+void usart_master_init(void) {
+    usart_init();
+
+    sdcfg.cr3 |= USART_CR3_HDSEL;
+    sdStart(&SERIAL_USART_DRIVER, &sdcfg);
+}
+
+void usart_slave_init(void) {
+    usart_init();
+
+    sdcfg.cr3 |= USART_CR3_HDSEL;
+    sdStart(&SERIAL_USART_DRIVER, &sdcfg);
+
+    // Start transport thread
+    chThdCreateStatic(waSlaveThread, sizeof(waSlaveThread), HIGHPRIO, SlaveThread, NULL);
+}
+
+static SSTD_t* Transaction_table      = NULL;
+static uint8_t Transaction_table_size = 0;
+
+void soft_serial_initiator_init(SSTD_t* sstd_table, int sstd_table_size) {
+    Transaction_table      = sstd_table;
+    Transaction_table_size = (uint8_t)sstd_table_size;
+
+    usart_master_init();
+}
+
+void soft_serial_target_init(SSTD_t* sstd_table, int sstd_table_size) {
+    Transaction_table      = sstd_table;
+    Transaction_table_size = (uint8_t)sstd_table_size;
+
+    usart_slave_init();
+}
+
+void handle_soft_serial_slave(void) {
+    uint8_t sstd_index = sdGet(&SERIAL_USART_DRIVER);  // first chunk is always transaction id
+    SSTD_t* trans      = &Transaction_table[sstd_index];
+
+    // Always write back the sstd_index as part of a basic handshake
+    sstd_index ^= HANDSHAKE_MAGIC;
+    sdWrite(&SERIAL_USART_DRIVER, &sstd_index, sizeof(sstd_index));
+
+    if (trans->initiator2target_buffer_size) {
+        sdRead(&SERIAL_USART_DRIVER, trans->initiator2target_buffer, trans->initiator2target_buffer_size);
+    }
+
+    if (trans->target2initiator_buffer_size) {
+        sdWrite(&SERIAL_USART_DRIVER, trans->target2initiator_buffer, trans->target2initiator_buffer_size);
+    }
+
+    if (trans->status) {
+        *trans->status = TRANSACTION_ACCEPTED;
+    }
+}
+
+/////////
+//  start transaction by initiator
+//
+// int  soft_serial_transaction(int sstd_index)
+//
+// Returns:
+//    TRANSACTION_END
+//    TRANSACTION_NO_RESPONSE
+//    TRANSACTION_DATA_ERROR
+#ifndef SERIAL_USE_MULTI_TRANSACTION
+int soft_serial_transaction(void) {
+    uint8_t sstd_index = 0;
+#else
+int soft_serial_transaction(int index) {
+    uint8_t sstd_index = index;
+#endif
+
+    if (sstd_index > Transaction_table_size) return TRANSACTION_TYPE_ERROR;
+    SSTD_t* trans = &Transaction_table[sstd_index];
+    msg_t   res   = 0;
+
+    sdClear(&SERIAL_USART_DRIVER);
+
+    // First chunk is always transaction id
+    sdWriteTimeout(&SERIAL_USART_DRIVER, &sstd_index, sizeof(sstd_index), TIME_MS2I(TIMEOUT));
+
+    uint8_t sstd_index_shake = 0xFF;
+
+    // Which we always read back first so that we can error out correctly
+    //   - due to the half duplex limitations on return codes, we always have to read *something*
+    //   - without the read, write only transactions *always* succeed, even during the boot process where the slave is not ready
+    res = sdReadTimeout(&SERIAL_USART_DRIVER, &sstd_index_shake, sizeof(sstd_index_shake), TIME_MS2I(TIMEOUT));
+    if (res < 0 || (sstd_index_shake != (sstd_index ^ HANDSHAKE_MAGIC))) {
+        dprintf("serial::usart_shake NO_RESPONSE\n");
+        return TRANSACTION_NO_RESPONSE;
+    }
+
+    if (trans->initiator2target_buffer_size) {
+        res = sdWriteTimeout(&SERIAL_USART_DRIVER, trans->initiator2target_buffer, trans->initiator2target_buffer_size, TIME_MS2I(TIMEOUT));
+        if (res < 0) {
+            dprintf("serial::usart_transmit NO_RESPONSE\n");
+            return TRANSACTION_NO_RESPONSE;
+        }
+    }
+
+    if (trans->target2initiator_buffer_size) {
+        res = sdReadTimeout(&SERIAL_USART_DRIVER, trans->target2initiator_buffer, trans->target2initiator_buffer_size, TIME_MS2I(TIMEOUT));
+        if (res < 0) {
+            dprintf("serial::usart_receive NO_RESPONSE\n");
+            return TRANSACTION_NO_RESPONSE;
+        }
+    }
+
+    return TRANSACTION_END;
+}

drivers/eeprom/eeprom_i2c.c

@@ -37,8 +37,9 @@
 
 // #define DEBUG_EEPROM_OUTPUT
 
-#ifdef DEBUG_EEPROM_OUTPUT
-#    include "print.h"
+#if defined(CONSOLE_ENABLE) && defined(DEBUG_EEPROM_OUTPUT)
+#    include "timer.h"
+#    include "debug.h"
 #endif  // DEBUG_EEPROM_OUTPUT
 
 static inline void init_i2c_if_required(void) {
@@ -60,7 +61,7 @@ static inline void fill_target_address(uint8_t *buffer, const void *addr) {
 void eeprom_driver_init(void) {}
 
 void eeprom_driver_erase(void) {
-#ifdef CONSOLE_ENABLE
+#if defined(CONSOLE_ENABLE) && defined(DEBUG_EEPROM_OUTPUT)
     uint32_t start = timer_read32();
 #endif
 
@@ -70,7 +71,7 @@ void eeprom_driver_erase(void) {
         eeprom_write_block(buf, (void *)(uintptr_t)addr, EXTERNAL_EEPROM_PAGE_SIZE);
     }
 
-#ifdef CONSOLE_ENABLE
+#if defined(CONSOLE_ENABLE) && defined(DEBUG_EEPROM_OUTPUT)
     dprintf("EEPROM erase took %ldms to complete\n", ((long)(timer_read32() - start)));
 #endif
 }
@@ -83,7 +84,7 @@ void eeprom_read_block(void *buf, const void *addr, size_t len) {
     i2c_transmit(EXTERNAL_EEPROM_I2C_ADDRESS((uintptr_t)addr), complete_packet, EXTERNAL_EEPROM_ADDRESS_SIZE, 100);
     i2c_receive(EXTERNAL_EEPROM_I2C_ADDRESS((uintptr_t)addr), buf, len, 100);
 
-#ifdef DEBUG_EEPROM_OUTPUT
+#if defined(CONSOLE_ENABLE) && defined(DEBUG_EEPROM_OUTPUT)
     dprintf("[EEPROM R] 0x%04X: ", ((int)addr));
     for (size_t i = 0; i < len; ++i) {
         dprintf(" %02X", (int)(((uint8_t *)buf)[i]));
@@ -110,7 +111,7 @@ void eeprom_write_block(const void *buf, void *addr, size_t len) {
             complete_packet[EXTERNAL_EEPROM_ADDRESS_SIZE + i] = read_buf[i];
         }
 
-#ifdef DEBUG_EEPROM_OUTPUT
+#if defined(CONSOLE_ENABLE) && defined(DEBUG_EEPROM_OUTPUT)
         dprintf("[EEPROM W] 0x%04X: ", ((int)target_addr));
         for (uint8_t i = 0; i < write_length; i++) {
             dprintf(" %02X", (int)(read_buf[i]));

drivers/eeprom/eeprom_spi.c

@@ -50,8 +50,9 @@
 #    define EXTERNAL_EEPROM_SPI_TIMEOUT 100
 #endif
 
-#ifdef CONSOLE_ENABLE
-#    include "print.h"
+#if defined(CONSOLE_ENABLE) && defined(DEBUG_EEPROM_OUTPUT)
+#    include "timer.h"
+#    include "debug.h"
 #endif  // CONSOLE_ENABLE
 
 static void init_spi_if_required(void) {
@@ -93,7 +94,7 @@ static void spi_eeprom_transmit_address(uintptr_t addr) {
 void eeprom_driver_init(void) {}
 
 void eeprom_driver_erase(void) {
-#ifdef CONSOLE_ENABLE
+#if defined(CONSOLE_ENABLE) && defined(DEBUG_EEPROM_OUTPUT)
     uint32_t start = timer_read32();
 #endif
 
@@ -103,7 +104,7 @@ void eeprom_driver_erase(void) {
         eeprom_write_block(buf, (void *)(uintptr_t)addr, EXTERNAL_EEPROM_PAGE_SIZE);
     }
 
-#ifdef CONSOLE_ENABLE
+#if defined(CONSOLE_ENABLE) && defined(DEBUG_EEPROM_OUTPUT)
     dprintf("EEPROM erase took %ldms to complete\n", ((long)(timer_read32() - start)));
 #endif
 }
@@ -141,7 +142,7 @@ void eeprom_read_block(void *buf, const void *addr, size_t len) {
     spi_eeprom_transmit_address((uintptr_t)addr);
     spi_receive(buf, len);
 
-#ifdef DEBUG_EEPROM_OUTPUT
+#if defined(CONSOLE_ENABLE) && defined(DEBUG_EEPROM_OUTPUT)
     dprintf("[EEPROM R] 0x%08lX: ", ((uint32_t)(uintptr_t)addr));
     for (size_t i = 0; i < len; ++i) {
         dprintf(" %02X", (int)(((uint8_t *)buf)[i]));
@@ -200,7 +201,7 @@ void eeprom_write_block(const void *buf, void *addr, size_t len) {
             return;
         }
 
-#ifdef DEBUG_EEPROM_OUTPUT
+#if defined(CONSOLE_ENABLE) && defined(DEBUG_EEPROM_OUTPUT)
         dprintf("[EEPROM W] 0x%08lX: ", ((uint32_t)(uintptr_t)target_addr));
         for (size_t i = 0; i < write_length; i++) {
             dprintf(" %02X", (int)(uint8_t)(read_buf[i]));

keyboards/40percentclub/gherkin/keymaps/stevexyz/keymap.c

@@ -16,7 +16,8 @@
 
 
 /*
- * see jj40/stevexyz for more information
+ * The 25% SuperMicro keyboard: a pure - full features - "Alpha 26" keymap on Gherkin, compatible also with 28 and 30 keys layouts
+ * See https://github.com/stevexyz/qmk_firmware/blob/master/keyboards/40percentclub/gherkin/keymaps/stevexyz/readme.md for more information
  */
 
 
@@ -56,7 +57,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * ,---------------------------------------------------------------------.
  * |      |      |      |      |      |      |      |      |      |      |
  * |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  |
- * | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ |
+ * | ____ | ____ | ____ | ____ | ____ | FnNav|NumSym|  Alt | Ctrl | Shift|
  * |------+------+------+------+-------------+------+------+------+------|
  * |      |      |      |      |      |      |      |      |      |      |
  * |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  | Enter|
@@ -68,83 +69,73 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  *        '-------------------------------------------------------'       
  */
   [LAYER_HOME] = LAYOUT_ortho_3x10(
-         LT(LAYER_ARROWPAD, KC_Q), LT(LAYER_NUMPAD, KC_W), LT(LAYER_MEDIAPAD, KC_E), KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,
-         MT(MOD_LSFT, KC_A), LT(LAYER_FUNC, KC_S), LT(LAYER_NUMSYM, KC_D), MT(MOD_RALT, KC_F), MT(MOD_LGUI, KC_G), MT(MOD_RGUI, KC_H), MT(MOD_RALT, KC_J), LT(LAYER_FUNC, KC_K), LT(LAYER_NUMSYM, KC_L), MT(MOD_RSFT, KC_ENT),
-         XXXXXXX, MT(MOD_LCTL, KC_Z), MT(MOD_LALT, KC_X), LT(LAYER_FUNC, KC_C), LT(LAYER_NUMSYM, KC_V), MT(MOD_LSFT, KC_B), MT(MOD_LALT, KC_N), MT(MOD_RCTL, KC_M), MT(MOD_RSFT, KC_SPC), XXXXXXX ),
+    LT(LAYER_ARROWPAD, KC_Q), LT(LAYER_NUMPAD, KC_W), LT(LAYER_MEDIAPAD, KC_E), KC_R, KC_T, LT(LAYER_FUNC, KC_Y), LT(LAYER_NUMSYM, KC_U), MT(MOD_LALT, KC_I), MT(MOD_RCTL, KC_O), MT(MOD_RSFT, KC_P),
+    MT(MOD_LSFT, KC_A), LT(LAYER_FUNC, KC_S), LT(LAYER_NUMSYM, KC_D), MT(MOD_RALT, KC_F), MT(MOD_LGUI, KC_G), MT(MOD_RGUI, KC_H), MT(MOD_RALT, KC_J), LT(LAYER_FUNC, KC_K), LT(LAYER_NUMSYM, KC_L), MT(MOD_RSFT, KC_ENT),
+    KC_DOWN, MT(MOD_LCTL, KC_Z), MT(MOD_LALT, KC_X), LT(LAYER_FUNC, KC_C), LT(LAYER_NUMSYM, KC_V), MT(MOD_LSFT, KC_B), MT(MOD_LALT, KC_N), MT(MOD_RCTL, KC_M), MT(MOD_RSFT, KC_SPC), KC_BSPC
+  ),
 
 /* Function and Navigation Layer
  * ,---------------------------------------------------------------------.
  * |      |      |      |      |      |      |      |      |      |      |
  * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |
- * | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ |
+ * | ____ | ____ | ____ | ____ | ____ | ____ |SysLay|  Alt | Ctrl | Shift|
  * |------+------+------+------+-------------+------+------+------+------|
  * |      |      |      |      |      |      |      |      |      |      |
- * |  ESC | Home | PgDn | PgUp |  End | Left | Down |  Up  | Right| Baksp|
+ * |  ESC | Home | PgDn | PgUp |  End | Left | Down |  Up  | Right|Backsp|
  * | Shift| ____ |SysLay| AltGr| OSkey| OSkey| AltGr| ____ |SysLay| Shift|
  * '------+------+------+------+------+------|------+------+------+------'
  *        |      |      |      |      |      |      |      |      |       
- *        | ____ | ____ |      | ____ | ____ | ____ | ____ | ____ |       
+ *        |  F11 |  F12 |      | Space|PrnScr|ScrLck|Pause |Backsp|       
  *        | Ctrl |  Alt | ____ |SysLay| Shift|  Alt | Ctrl | Shift|       
  *        '-------------------------------------------------------'       
  */
   [LAYER_FUNC] = LAYOUT_ortho_3x10(
-         KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10,
-         MT(MOD_LSFT, KC_ESC), KC_HOME, LT(LAYER_SYST, KC_PGDN), MT(MOD_RALT, KC_PGUP), MT(MOD_LGUI, KC_END), MT(MOD_RGUI, KC_LEFT), MT(MOD_RALT, KC_DOWN), KC_UP, LT(LAYER_SYST, KC_RGHT), MT(MOD_RSFT, KC_BSPC),
-         XXXXXXX, KC_LCTL, KC_LALT, KC_NO, MO(LAYER_SYST), KC_LSFT, KC_LALT, KC_RCTL, MT(MOD_RSFT, KC_SPC), XXXXXXX ),
+    KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, LT(LAYER_SYST, KC_F7), MT(MOD_LALT, KC_F8), MT(MOD_RCTL,KC_F9), MT(MOD_RSFT, KC_F10),
+    MT(MOD_LSFT, KC_ESC), KC_HOME, LT(LAYER_SYST, KC_PGDN), MT(MOD_RALT, KC_PGUP), MT(MOD_LGUI, KC_END), MT(MOD_RGUI, KC_LEFT), MT(MOD_RALT, KC_DOWN), KC_UP, LT(LAYER_SYST, KC_RGHT), MT(MOD_RSFT, KC_BSPC),
+    KC_DOWN, MT(KC_LCTL, KC_F11), MT(KC_LALT, KC_F12), KC_NO, LT(LAYER_SYST, KC_SPACE), MT(KC_LSFT, KC_PSCR), MT(KC_LALT, KC_SLCK), MT(KC_RCTL, KC_PAUS), MT(MOD_RSFT, KC_BSPC), KC_UP
+  ),
 
 /* Number and Symbols Layer
  * ,---------------------------------------------------------------------.
  * |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  |
  * |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |
- * | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ |
+ * | ____ | ____ | ____ | ____ | ____ |SysLay| ____ |  Alt | Ctrl | Shift|
  * |------+------+------+------+-------------+------+------+------+------|
  * |      |   ~  |   _  |   +  |   {  |   }  |  |   |   :  |   "  |      |
  * |  TAB |   `  |   -  |   =  |   [  |   ]  |  \   |   ;  |   '  | Del  |
  * | Shift|SysLay| ____ | AltGr| OSkey| OSkey| AltGr|SysLay| ____ | Shift|
  * ' -----+------+------+------+------+------|------+------+------+------'
  *        |      |      |      |      |   <  |   >  |   ?  |      |       
- *        | ____ | ____ | ____ |      |   ,  |   .  |   /  | ____ |       
+ *        |BackSp|  Del | Enter|      |   ,  |   .  |   /  | Enter|       
  *        | Ctrl |  Alt |SysLay| ____ | Shift|  Alt | Ctrl | Shift|       
  *        '-------------------------------------------------------'       
  */
   [LAYER_NUMSYM] = LAYOUT_ortho_3x10(
-         KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,
-         MT(MOD_LSFT, KC_TAB), LT(LAYER_SYST, KC_GRV), KC_MINS, MT(MOD_RALT, KC_EQL), MT(MOD_LGUI, KC_LBRC), MT(MOD_RGUI, KC_RBRC), MT(MOD_RALT, KC_BSLS), LT(LAYER_SYST, KC_SCLN), KC_QUOT, MT(MOD_RSFT, KC_DEL),
-         XXXXXXX, KC_LCTL, KC_LALT, MO(LAYER_SYST), KC_NO, MT(MOD_LSFT, KC_COMM), MT(MOD_LALT, KC_DOT), MT(MOD_RCTL, KC_SLSH), MT(MOD_RSFT, KC_SPC), XXXXXXX ),
+    KC_1, KC_2, KC_3, KC_4, KC_5, LT(LAYER_SYST, KC_6), KC_7, MT(MOD_LALT, KC_8), MT(MOD_RCTL,KC_9), MT(MOD_RSFT, KC_0),
+    MT(MOD_LSFT, KC_TAB), LT(LAYER_SYST, KC_GRV), KC_MINS, MT(MOD_RALT, KC_EQL), MT(MOD_LGUI, KC_LBRC), MT(MOD_RGUI, KC_RBRC), MT(MOD_RALT, KC_BSLS), LT(LAYER_SYST, KC_SCLN), KC_QUOT, MT(MOD_RSFT, KC_DEL),
+    KC_LEFT, MT(KC_LCTL, KC_BSPC), MT(KC_LALT, KC_DEL), LT(LAYER_SYST, KC_ENT), KC_NO, MT(MOD_LSFT, KC_COMM), MT(MOD_LALT, KC_DOT), MT(MOD_RCTL, KC_SLSH), MT(MOD_RSFT, KC_ENT), KC_RGHT
+  ),
 
 /* System Layer
  * ,---------------------------------------------------------------------.
  * |      |      |      |      |      |      |      |      |      |      |
- * | F11  | F12  | Play | Next |MsWhlU|MsBtn1|OSMenu|SysReq|MsBtn2|Backsp|
- * | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ |
+ * | Play | Stop | Prev | Next |MsBtn1|MsLeft|MSDown| MsUp |MsRigh|MsBtn2|
+ * | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | Shift|
  * |------+------+------+------+-------------+------+------+------+------|
  * |      |      |      |      |      |      |      |      |      |      |
- * | Caps | Mute | Vol- | Vol+ |MsWhlD|MsLeft|MSDown| MsUp |MsRigh| Ins  |
- * | Shift| ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | Shift|
+ * |Backsp| Mute | Vol- | Vol+ |MsWhlD| Left | Down |  Up  | Right|Backsp|
+ * | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ |
  * '------+------+------+------+------+------|------+------+------+------'
  *        |      |      |      |      |      |      |      |      |       
- *        | ____ | ____ |      |      |PrnScr|ScrLck|Pause | ____ |       
- *        | Ctrl |  Alt | ____ | ____ | ____ | ____ | ____ | Shift|       
- *        '-------------------------------------------------------'       
- * simplified view (for media and mouse there are dedicated layers)
- * ,---------------------------------------------------------------------.
- * |      |      |      |      |      |      |      |      |      |      |
- * | F11  | F12  |      |      |      |      |OSMenu|SysReq|      |Backsp|
- * | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ |
- * |------+------+------+------+-------------+------+------+------+------|
- * |      |      |      |      |      |      |      |      |      |      |
- * | Caps |      |      |      |      |      |      |      |      | Ins  |
- * | Shift| ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | Shift|
- * '------+------+------+------+------+------|------+------+------+------+
- *        |      |      |      |      |      |      |      |      |        
- *        |      |      |      |      |PrnScr|ScrLck|Pause |      |       
- *        | Ctrl |  Alt | ____ | ____ | ____ | ____ | ____ | Shift|       
+ *        | ____ | ____ | Enter| Space| Mute | Vol- | Vol+ | Space|       
+ *        | Ctrl |  Alt | ____ | ____ | Shift| Alt  | Ctrl | ____ |       
  *        '-------------------------------------------------------'       
  */
   [LAYER_SYST] = LAYOUT_ortho_3x10(
-         KC_F11, KC_F12, KC_MPLY, KC_MNXT, KC_MS_WH_UP, KC_MS_BTN1, KC_APP, KC_SYSREQ, KC_MS_BTN2, KC_BSPC, 
-         MT(MOD_LSFT, KC_CAPS), KC_MUTE, KC_VOLD, KC_VOLU, KC_MS_WH_DOWN, KC_MS_LEFT, KC_MS_DOWN, KC_MS_UP, KC_MS_RIGHT, MT(MOD_RSFT, KC_INS), 
-         XXXXXXX, KC_LCTL, KC_LALT, KC_NO, KC_NO, KC_PSCR, KC_SLCK, KC_PAUS, MT(MOD_RSFT, KC_SPC), XXXXXXX ),
+    KC_MPLY, KC_STOP, KC_MPRV, KC_MNXT, KC_MS_BTN1, KC_MS_LEFT, KC_MS_DOWN, KC_MS_UP, KC_MS_RIGHT, MT(MOD_RSFT, KC_MS_BTN2),
+    KC_BSPC, KC_DEL, KC_PGDN, KC_PGUP, KC_APP, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_BSPC,
+    KC_PGDN, MT(KC_LCTL, KC_CAPS), MT(KC_LALT, KC_INS), KC_ENT, KC_SPC, MT(MOD_RSFT, KC_MUTE), MT(MOD_LALT, KC_VOLD), MT(MOD_RCTL, KC_VOLU), KC_SPC, KC_PGUP
+  ),
 
  /* ArrowPad (mod su Q)  /------mouse-------\ /-----cursor-------\
  * ,---------------------------------------------------------------------.
@@ -157,23 +148,24 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * | Shift| ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ |
  * '------+------+------+------+------+------|------+------+------+------'
  *        |      |      |      |      |      |      |      |      |        
- *        |      |      |MsWhlU|MsDown|MsWhlD|  End | Down | PdDn |       
+ *        |      |      |MsWhlU|MsDown|MsWhlD|  End | PgDn | PgDn |       
  *        | Ctrl |  Alt | ____ | ____ | ____ | ____ | ____ | ____ |       
  *        '-------------------------------------------------------'       
  */
   [LAYER_ARROWPAD] = LAYOUT_ortho_3x10(
-         KC_NO, KC_NO, KC_NO, KC_MS_BTN1, KC_MS_UP, KC_MS_BTN2, KC_HOME, KC_UP, KC_PGUP, KC_BSPC, 
-         KC_LSFT, KC_NO, KC_NO, KC_MS_LEFT, KC_MS_DOWN, KC_MS_RIGHT, KC_LEFT, KC_DOWN, KC_RIGHT, KC_ENT, 
-         XXXXXXX, KC_LCTL, KC_LALT, KC_MS_WH_UP, KC_MS_DOWN, KC_MS_WH_DOWN, KC_END, KC_DOWN, KC_PGDN, XXXXXXX ),
+    KC_NO, KC_NO, KC_NO, KC_MS_BTN1, KC_MS_UP, KC_MS_BTN2, KC_HOME, KC_UP, KC_PGUP, KC_BSPC, 
+    KC_LSFT, KC_NO, KC_NO, KC_MS_LEFT, KC_MS_DOWN, KC_MS_RIGHT, KC_LEFT, KC_DOWN, KC_RIGHT, KC_ENT, 
+    XXXXXXX, KC_LCTL, KC_LALT, KC_MS_WH_UP, KC_MS_DOWN, KC_MS_WH_DOWN, KC_END, KC_PGDN, KC_PGDN, XXXXXXX 
+  ),
 
 /* NumPad (mod su W)
  * ,---------------------------------------------------------------------.
  * |      |      |      |      |      |      |      |      |      |      |
- * |      |      |   /  |   *  |   -  |Backsp|   7  |   8  |   9  |  0   |
+ * |      |      |   3  |   *  |   -  |Backsp|   7  |   8  |   9  |  0   |
  * | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ |
  * |------+------+------+------+-------------+------+------+------+------|
  * |      |      |      |      |      |      |      |      |      |      |
- * |      |      |      |   =  |   +  |   .  |   4  |   5  |   6  | Enter|
+ * |      |      |   /  |   =  |   +  |   .  |   4  |   5  |   6  | Enter|
  * | Shift| ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ |
  * '------+------+------+------+------+------|------+------+------+------'
  *        |      |      |      |      |      |      |      |      |       
@@ -182,9 +174,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  *        '-------------------------------------------------------'       
  */
   [LAYER_NUMPAD] = LAYOUT_ortho_3x10(
-         KC_NO, KC_NO, KC_KP_SLASH, KC_KP_ASTERISK, KC_KP_MINUS, KC_BSPC, KC_7, KC_8, KC_9, KC_0, 
-         KC_LSFT, KC_NO, KC_NO, KC_KP_EQUAL, KC_KP_PLUS, KC_DOT, KC_4, KC_5, KC_6, KC_ENT, 
-         XXXXXXX, KC_LCTL, KC_LALT, KC_NO, KC_TAB, KC_COMM, KC_1, KC_2, KC_3, XXXXXXX ),
+    KC_NO, KC_NO, KC_3, KC_KP_ASTERISK, KC_KP_MINUS, KC_BSPC, KC_7, KC_8, KC_9, KC_0, 
+    KC_LSFT, KC_NO, KC_KP_SLASH, KC_KP_EQUAL, KC_KP_PLUS, KC_DOT, KC_4, KC_5, KC_6, KC_ENT, 
+    XXXXXXX, KC_LCTL, KC_LALT, KC_NO, KC_TAB, KC_COMM, KC_1, KC_2, KC_3, XXXXXXX 
+  ),
  
  /* MediaPad (mod su E)
  * ,---------------------------------------------------------------------.
@@ -202,9 +195,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  *        '-------------------------------------------------------'       
  */
   [LAYER_MEDIAPAD] = LAYOUT_ortho_3x10(
-         KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_VOLU, KC_NO, KC_NO, 
-         KC_LSFT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_MPRV, KC_MPLY, KC_MNXT, KC_NO, 
-         XXXXXXX, KC_LCTL, KC_LALT, KC_NO, KC_NO, KC_NO, KC_MUTE, KC_VOLD, KC_NO, XXXXXXX ),  
+    KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_VOLU, KC_NO, KC_NO, 
+    KC_LSFT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_MPRV, KC_MPLY, KC_MNXT, KC_NO, 
+    XXXXXXX, KC_LCTL, KC_LALT, KC_NO, KC_NO, KC_NO, KC_MUTE, KC_VOLD, KC_NO, XXXXXXX 
+  ),  
     
 };
 
@@ -225,15 +219,13 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
     case CK_TRIPLEZERO:
       if (record->event.pressed) {
         SEND_STRING("000");
-      } // else { when released... }
+      } // else { when released }
       break;
   }
   return true;
 };
 
 void keyboard_pre_init_user(void) {
-  // Call the keyboard pre init code.
-
   // Set our LED pins as output
   setPinOutput(D5);
   setPinOutput(B0);

keyboards/40percentclub/gherkin/keymaps/stevexyz/readme.md

@@ -1,11 +1,15 @@
-# gherkin super micro edition
+# The 25% SuperMicro keyboard
+## A full featured keymap on Gherkin compatible with a pure "Alpha 26" layout
 
-With this configuration the "28" layout first experimented on the plank-like jj40 is being ported to a more proper board, leaving just two keys not used.
+With this configuration the "SuperMicro" layout first experimented on the plank-like jj40 is being ported to a more proper board, and with the last changes, this layout has been made compatible also to a "26 keys" one. So you can now choose to leave all 30 keys on the keyboard, or remove the two on the bottom line corners to have the "old" and comfortable 28 keys layout, or remove also space and enter to have the simplest "pure alpha" one! And even the intermediate 27 keys one is an interesting compatible option!
 
-For more information please have a look at https://github.com/stevexyz/qmk_firmware/blob/master/keyboards/jj40/keymaps/stevexyz/readme.md 
+This keymap is for a generic usage, trying to avoid as much gimmick as possible (considering the number of keys) and retain muscle memory from people used to the standard Qwerty 104 keys one. Functions and numbers (with related symbols) are on the first row as expected; other examples of design coherency include the symbols on the central row laid out in the same order as you'll find on a standard full keyboard, and the cursor movement aligned to the common unix vi standard ("hjkl", and for symmetry "sdfg" for home/pgdn/pgup/end). I've personally used this layout for months on my home PC in parallel to my portable work PC.
 
-The image below explain the main layers. In addition to them with q, w and e there are three specific dedicated layers for cursors/mouse, numpad and media.
-![layers](https://raw.githubusercontent.com/stevexyz/qmk_firmware/master/keyboards/40percentclub/gherkin/keymaps/stevexyz/layers.jpeg)
+Relying just on the alphabetic keys this layout can be also very easily ported and tested on any qmk supported keyboard (ok, butterstick excluded).
+
+The image below explains the main layers activated respectively with F, N or both modifiers pressed together. In addition to them there are available 5 layers that can be personalized as needed or completely removed without losing any functionality; three of them are currently setup in the default keymap for cursors/mouse, numpad and media (activated with q, w and e respectively).
+
+![layers](https://github.com/stevexyz/qmk_firmware/blob/master/keyboards/40percentclub/gherkin/keymaps/stevexyz/newlayout26272830.jpg)
 
 ![prototype](https://github.com/stevexyz/qmk_firmware/blob/master/keyboards/40percentclub/gherkin/keymaps/stevexyz/gherkin28.jpeg)
 

keyboards/aos/tkl/config.h

@@ -0,0 +1,56 @@
+/*
+Copyright 2020 aholland909
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x504B
+#define PRODUCT_ID      0x1000
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Ace of Spades
+#define PRODUCT         Ace of Spades TKL
+#define DESCRIPTION     Ace of Spades TKL
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 17
+
+#define MATRIX_ROW_PINS { D3, D2, B7, F1, C7, D5 }
+#define MATRIX_COL_PINS { B0, B1, B2, B3, F4, F5, F6, F7, B6, B5, D7, B4, D6, F0, D1, C6, D4 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+
+#define RGB_DI_PIN E6
+#ifdef RGB_DI_PIN
+    #define RGBLIGHT_ANIMATIONS
+    #define RGBLED_NUM 88
+    #define RGBLIGHT_HUE_STEP 8
+    #define RGBLIGHT_SAT_STEP 8
+    #define RGBLIGHT_VAL_STEP 8
+#endif

keyboards/aos/tkl/info.json

@@ -0,0 +1,98 @@
+{
+    "keyboard_name": "Ace of Spades TKL",
+    "maintainer": "rys",
+    "width": 18.25,
+    "height": 6.5,
+    "layouts": {
+        "LAYOUT_tkl_iso_wkl": {
+            "key_count": 85,
+            "layout": [
+                {"label":"Esc", "x":0, "y":0},
+                {"label":"F1", "x":2, "y":0},
+                {"label":"F2", "x":3, "y":0},
+                {"label":"F3", "x":4, "y":0},
+                {"label":"F4", "x":5, "y":0},
+                {"label":"F5", "x":6.5, "y":0},
+                {"label":"F6", "x":7.5, "y":0},
+                {"label":"F7", "x":8.5, "y":0},
+                {"label":"F8", "x":9.5, "y":0},
+                {"label":"F9", "x":11, "y":0},
+                {"label":"F10", "x":12, "y":0},
+                {"label":"F11", "x":13, "y":0},
+                {"label":"F12", "x":14, "y":0},
+                {"label":"PrtSc", "x":15.25, "y":0},
+                {"label":"Scroll Lock", "x":16.25, "y":0},
+                {"label":"Pause", "x":17.25, "y":0},
+                {"label":"\u00ac", "x":0, "y":1.5},
+                {"label":"!", "x":1, "y":1.5},
+                {"label":"\"", "x":2, "y":1.5},
+                {"label":"£", "x":3, "y":1.5},
+                {"label":"$", "x":4, "y":1.5},
+                {"label":"%", "x":5, "y":1.5},
+                {"label":"^", "x":6, "y":1.5},
+                {"label":"&", "x":7, "y":1.5},
+                {"label":"*", "x":8, "y":1.5},
+                {"label":"(", "x":9, "y":1.5},
+                {"label":")", "x":10, "y":1.5},
+                {"label":"_", "x":11, "y":1.5},
+                {"label":"+", "x":12, "y":1.5},
+                {"label":"Backspace", "x":13, "y":1.5, "w":2},
+                {"label":"Insert", "x":15.25, "y":1.5},
+                {"label":"Home", "x":16.25, "y":1.5},
+                {"label":"PgUp", "x":17.25, "y":1.5},
+                {"label":"Tab", "x":0, "y":2.5, "w":1.5},
+                {"label":"Q", "x":1.5, "y":2.5},
+                {"label":"W", "x":2.5, "y":2.5},
+                {"label":"E", "x":3.5, "y":2.5},
+                {"label":"R", "x":4.5, "y":2.5},
+                {"label":"T", "x":5.5, "y":2.5},
+                {"label":"Y", "x":6.5, "y":2.5},
+                {"label":"U", "x":7.5, "y":2.5},
+                {"label":"I", "x":8.5, "y":2.5},
+                {"label":"O", "x":9.5, "y":2.5},
+                {"label":"P", "x":10.5, "y":2.5},
+                {"label":"{", "x":11.5, "y":2.5},
+                {"label":"}", "x":12.5, "y":2.5},
+                {"label":"Delete", "x":15.25, "y":2.5},
+                {"label":"End", "x":16.25, "y":2.5},
+                {"label":"PgDn", "x":17.25, "y":2.5},
+                {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75},
+                {"label":"A", "x":1.75, "y":3.5},
+                {"label":"S", "x":2.75, "y":3.5},
+                {"label":"D", "x":3.75, "y":3.5},
+                {"label":"F", "x":4.75, "y":3.5},
+                {"label":"G", "x":5.75, "y":3.5},
+                {"label":"H", "x":6.75, "y":3.5},
+                {"label":"J", "x":7.75, "y":3.5},
+                {"label":"K", "x":8.75, "y":3.5},
+                {"label":"L", "x":9.75, "y":3.5},
+                {"label":":", "x":10.75, "y":3.5},
+                {"label":"@", "x":11.75, "y":3.5},
+                {"label":"~", "x":12.75, "y":3.5},
+                {"label":"Enter", "x":13.75, "y":2.5, "w":1.25, "h":2},
+                {"label":"Shift", "x":0, "y":4.5, "w":1.25},
+                {"label":"|", "x":1.25, "y":4.5},
+                {"label":"Z", "x":2.25, "y":4.5},
+                {"label":"X", "x":3.25, "y":4.5},
+                {"label":"C", "x":4.25, "y":4.5},
+                {"label":"V", "x":5.25, "y":4.5},
+                {"label":"B", "x":6.25, "y":4.5},
+                {"label":"N", "x":7.25, "y":4.5},
+                {"label":"M", "x":8.25, "y":4.5},
+                {"label":"<", "x":9.25, "y":4.5},
+                {"label":">", "x":10.25, "y":4.5},
+                {"label":"?", "x":11.25, "y":4.5},
+                {"label":"Shift", "x":12.25, "y":4.5, "w":2.75},
+                {"label":"Up", "x":16.25, "y":4.5},
+                {"label":"Ctrl", "x":0, "y":5.5, "w":1.5},
+                {"label":"Alt", "x":2.5, "y":5.5, "w":1.5},
+                {"label":"Space", "x":4, "y":5.5, "w":7},
+                {"label":"AltGr", "x":11, "y":5.5, "w":1.5},
+                {"label":"Ctrl", "x":13.5, "y":5.5, "w":1.5},
+                {"label":"Left", "x":15.25, "y":5.5},
+                {"label":"Down", "x":16.25, "y":5.5},
+                {"label":"Right", "x":17.25, "y":5.5}
+            ]
+        }
+    }
+}

keyboards/aos/tkl/keymaps/aholland909/keymap.c

@@ -0,0 +1,38 @@
+/*
+Copyright 2020 aholland909
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT_tkl_iso_wkl(
+    KC_GESC,       KC_F1,   KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9,   KC_F10,  KC_F11,  KC_F12,           KC_PSCR, KC_SLCK, KC_PAUSE,
+
+    KC_GRV,        KC_1,    KC_2,  KC_3,  KC_4,  KC_5,  KC_6,  KC_7,  KC_8,  KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_INS,  KC_HOME, KC_PGUP,
+    KC_TAB,        KC_Q,    KC_W,  KC_E,  KC_R,  KC_T,  KC_Y,  KC_U,  KC_I,  KC_O,    KC_P,    KC_LBRC, KC_RBRC,          KC_DEL,  KC_END,  KC_PGDN,
+    LT(1,KC_CAPS), KC_A,    KC_S,  KC_D,  KC_F,  KC_G,  KC_H,  KC_J,  KC_K,  KC_L,    KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,
+    KC_LSFT,       KC_NUBS, KC_Z,  KC_X,  KC_C,  KC_V,  KC_B,  KC_N,  KC_M,  KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT,          KC_UP,
+    KC_LCTL,                KC_LALT,                    KC_SPC,                                KC_RGUI,          TG(1),   KC_LEFT, KC_DOWN, KC_RGHT),
+
+  [1] = LAYOUT_tkl_iso_wkl(
+    RESET,    KC_F13,  KC_F14,   KC_F15,   KC_F16,   KC_F17,   KC_F18,   KC_F19,   KC_F20,   KC_F21,   KC_F22,   KC_F23,   KC_F24,            _______,  _______,  _______,
+
+    _______,  _______, _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______, _______,  _______,  _______,  _______,
+    _______,  _______, KC_VOLU,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,           RGB_M_P,  RGB_M_B,  _______,
+    _______,  KC_MPRV, KC_VOLD,  KC_MNXT,  _______,  _______,  KC_LEFT,  KC_DOWN,  KC_UP,    KC_RGHT,  _______,  _______,  _______, _______,
+    _______,  _______, _______,  _______,  KC_CALC,  _______,  _______,  _______,  _______,  _______,  _______,  _______,           _______,            RGB_HUI,
+    _______,           _______,                      KC_MPLY,                                _______,            _______,                     RGB_SAD,  RGB_HUD,  RGB_VAI),
+};

keyboards/aos/tkl/keymaps/default/keymap.c

@@ -0,0 +1,38 @@
+/*
+Copyright 2020 aholland909
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT_tkl_iso_wkl(
+    KC_ESC,  KC_F1,   KC_F1,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,           KC_PSCR, KC_SLCK, KC_PAUS,
+
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_INS,  KC_HOME, KC_PGUP,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,          KC_DEL,  KC_END,  KC_PGDN,
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,
+    KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT,          KC_UP,
+    KC_LCTL,          KC_LALT,                   KC_SPC,                             KC_RGUI,          MO(1),                     KC_LEFT, KC_DOWN, KC_RGHT
+  ),
+  [1] = LAYOUT_tkl_iso_wkl(
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______,
+
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______,          RGB_M_P, RGB_M_B, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,          RGB_HUI,
+    _______,          _______,                   _______,                            _______,          _______,                   RGB_SAD, RGB_HUD, RGB_VAI
+  ),
+};

keyboards/aos/tkl/keymaps/default/readme.md

@@ -0,0 +1,3 @@
+# The default keymap for Ace of Spades
+
+The Ace of Spades is a fixed ISO TKL with blocked winkeyless bottom row.

keyboards/aos/tkl/keymaps/via/keymap.c

@@ -0,0 +1,55 @@
+/* Copyright 2020 Rys Sommefeldt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT_tkl_iso_wkl(
+    KC_ESC,  KC_F1,   KC_F1,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,           KC_PSCR, KC_SLCK, KC_PAUS,
+
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_INS,  KC_HOME, KC_PGUP,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,          KC_DEL,  KC_END,  KC_PGDN,
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,
+    KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT,          KC_UP,
+    KC_LCTL,          KC_LALT,                   KC_SPC,                             KC_RGUI,          MO(1),                     KC_LEFT, KC_DOWN, KC_RGHT
+  ),
+  [1] = LAYOUT_tkl_iso_wkl(
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______,
+
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______,          RGB_M_P, RGB_M_B, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,          RGB_HUI,
+    _______,          _______,                   _______,                            _______,          _______,                   RGB_SAD, RGB_HUD, RGB_VAI
+  ),
+  [2] = LAYOUT_tkl_iso_wkl(
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______,
+
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,          _______,
+    _______,          _______,                   _______,                            _______,          _______,                   _______, _______, _______
+  ),
+  [3] = LAYOUT_tkl_iso_wkl(
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______,
+
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,          _______,
+    _______,          _______,                   _______,                            _______,          _______,                   _______, _______, _______
+  ),
+};

keyboards/aos/tkl/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+MOUSEKEY_ENABLE = no

keyboards/aos/tkl/readme.md

@@ -0,0 +1,13 @@
+# Ace of Spades TKL
+
+The TKL is a custom limited run keyboard designed by Ace of Spades and manufactured by Salvun.
+
+* Keyboard Maintainers: [aholland909](https://github.com/aholland909), [rys](https://github.com/rys)
+* Hardware Supported: Ace of Spades custom TKL PCB by [aholland909](https://github.com/aholland909)
+* Hardware Availability: Custom group buy
+
+Make example for this keyboard (after setting up your build environment):
+
+    make aos/tkl:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/aos/tkl/rules.mk

@@ -0,0 +1,32 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches

keyboards/aos/tkl/tkl.c

@@ -0,0 +1,18 @@
+/*
+Copyright 2020 aholland909
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "tkl.h"

keyboards/aos/tkl/tkl.h

@@ -0,0 +1,46 @@
+/*
+Copyright 2020 aholland909
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+
+#define LAYOUT_tkl_iso_wkl( \
+    K000,       K002, K003, K004, K005,    K006, K007, K008, K009,    K010, K011, K012, K013,    K014, K015, K016, \
+                                                                                                                   \
+    K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112,       K113,    K114, K115, K116, \
+    K200,    K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,             K214, K215, K216, \
+    K300,     K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312,   K213,                      \
+    K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411,             K412,          K415,       \
+    K500,       K502,                      K505,                            K510,       K512,    K513, K515, K516  \
+) { \
+    { K000,  KC_NO, K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014,  K015,  K016  }, \
+    { K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114,  K115,  K116  }, \
+    { K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  K214,  K215,  K216  }, \
+    { K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  KC_NO, KC_NO, KC_NO, KC_NO }, \
+    { K400,  K401,  K402,  K403,  K404,  K405,  K406,  K407,  K408,  K409,  K410,  K411,  K412,  KC_NO, KC_NO, K415,  KC_NO }, \
+    { K500,  KC_NO, K502,  KC_NO, KC_NO, KC_NO, KC_NO, K505, KC_NO, KC_NO, K510,  KC_NO, K512,  K513,  KC_NO, K515,  K516  }, \
+}

keyboards/atreus/astar_mirrored/config.h

@@ -28,7 +28,7 @@
  *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
  *
 */
-#define PDBDOWN 1
+#define PCBDOWN 1
 
 #define MATRIX_ROW_PINS { D0, D1, D3, D2 }
 #define MATRIX_COL_PINS { B7, D6, F7, F6, B6, D4, E6, B4, B5, C6, D7 }

keyboards/candybar/lefty/config.h

@@ -19,8 +19,8 @@
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6060
+#define VENDOR_ID       0x544B //TK
+#define PRODUCT_ID      0x0003
 #define DEVICE_VER      0x0006
 #define MANUFACTURER    The Key Company
 #define PRODUCT         Candybar

keyboards/candybar/lefty/keymaps/via/keymap.c

@@ -0,0 +1,38 @@
+/* Copyright 2018 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+#define _BL 0
+#define _FL 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Keymap _BL: Base Layer (Default Layer)
+   */
+[_BL] = LAYOUT(
+  KC_P7  , KC_P8, KC_P9  , KC_PAST, KC_ESC , KC_Q   , KC_W   , KC_E, KC_R   , KC_T  , KC_Y, KC_U   , KC_I   , KC_O   , KC_P   , KC_DEL , KC_BSPC , \
+  KC_P4  , KC_P5, KC_P6  , KC_PMNS, KC_TAB , KC_A   , KC_S   , KC_D, KC_F   , KC_G  , KC_H, KC_J   , KC_K   , KC_L   , KC_SCLN,          KC_ENT  , \
+  KC_P1  , KC_P2, KC_P3  , KC_PPLS, KC_LSFT,          KC_Z   , KC_X, KC_C   , KC_V  , KC_B, KC_N   , KC_M   , KC_COMM, KC_DOT , KC_UP   ,KC_RSFT , \
+  MO(_FL), KC_P0, KC_PDOT, KC_PENT, KC_LCTL, KC_LGUI, KC_LALT,                KC_SPC,       KC_SPC , KC_BSPC, KC_APP , KC_LEFT, KC_DOWN, KC_RGHT),
+
+  /* Keymap _FL: Function Layer
+  */
+  [_FL] = LAYOUT(
+  KC_P7 , KC_P8, KC_P9  , KC_VOLU, RESET  , KC_Q   , KC_W   , KC_E, KC_R   , KC_T  , KC_Y, KC_U   , KC_I   , KC_LBRC, KC_RBRC, KC_INS , KC_BSPC , \
+  KC_P4 , KC_P5, KC_P6  , KC_VOLD, KC_TAB , KC_A   , KC_SLCK, KC_D, KC_F   , KC_G  , KC_H, KC_J   , KC_K   , KC_L   , KC_QUOT,          KC_BSLS , \
+  KC_P1 , KC_P2, KC_P3  , KC_PEQL, KC_LSFT,          KC_Z   , KC_X, KC_CAPS, KC_V  , KC_B, KC_NLCK, KC_M   , KC_COMM, KC_DOT , KC_SLSH, KC_PGUP , \
+  KC_END, KC_P0, KC_PDOT, KC_PENT, KC_LCTL, KC_LGUI, KC_LALT,                KC_SPC,       KC_SPC , KC_BSPC, KC_APP , MO(_FL), KC_HOME, KC_PGDN),
+};

keyboards/candybar/lefty/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/candybar/lefty/rules.mk

@@ -7,7 +7,7 @@ MCU = STM32F072
 # EXTRAFLAGS+=-flto
 LINK_TIME_OPTIMIZATION_ENABLE = yes
 BACKLIGHT_ENABLE = no
-BOOTMAGIC_ENABLE = yes  # Virtual DIP switch configuration
+BOOTMAGIC_ENABLE = lite  # Virtual DIP switch configuration
 ## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
 MOUSEKEY_ENABLE = no # Mouse keys
 EXTRAKEY_ENABLE = yes # Audio control and System control

keyboards/candybar/righty/config.h

@@ -19,8 +19,8 @@
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6060
+#define VENDOR_ID       0x544B //TK
+#define PRODUCT_ID      0x0002
 #define DEVICE_VER      0x0006
 #define MANUFACTURER    The Key Company
 #define PRODUCT         Candybar

keyboards/candybar/righty/keymaps/via/keymap.c

@@ -0,0 +1,38 @@
+/* Copyright 2018 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+#define _BL 0
+#define _FL 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Keymap _BL: Base Layer (Default Layer)
+   */
+[_BL] = LAYOUT(
+  KC_ESC,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_O,KC_P,KC_DEL,KC_BSPC,KC_P7,KC_P8,KC_P9,KC_PAST, \
+  KC_TAB,KC_A,KC_S,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_ENT,KC_P4,KC_P5,KC_P6,KC_PMNS, \
+  KC_LSFT,KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_RSFT,KC_UP,KC_P1,KC_P2,KC_P3,KC_PPLS, \
+  KC_LCTL,KC_LGUI,KC_LALT,KC_SPC,KC_SPC,KC_BSPC,KC_APP,MO(_FL),KC_LEFT,KC_DOWN,KC_RGHT,KC_P0,KC_PDOT,KC_PENT),
+
+  /* Keymap _FL: Function Layer
+   */
+[_FL] = LAYOUT(
+  RESET,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_LBRC,KC_RBRC,KC_INS,KC_BSPC,KC_P7,KC_P8,KC_P9,KC_VOLU, \
+  KC_TAB,KC_A,KC_SLCK,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_QUOT,KC_BSLS,KC_P4,KC_P5,KC_P6,KC_VOLD, \
+  KC_LSFT,KC_Z,KC_X,KC_CAPS,KC_V,KC_B,KC_NLCK,KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_PGUP,KC_P1,KC_P2,KC_P3,KC_PEQL, \
+  KC_LCTL,KC_LGUI,KC_LALT,KC_SPC,KC_SPC,KC_BSPC,KC_APP,MO(_FL),KC_HOME,KC_PGDN,KC_END,KC_P0,KC_PDOT,KC_PENT),
+};

keyboards/candybar/righty/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/candybar/righty/rules.mk

@@ -7,7 +7,7 @@ MCU = STM32F072
 # EXTRAFLAGS+=-flto
 LINK_TIME_OPTIMIZATION_ENABLE = yes
 BACKLIGHT_ENABLE = no
-BOOTMAGIC_ENABLE = yes  # Virtual DIP switch configuration
+BOOTMAGIC_ENABLE = lite  # Virtual DIP switch configuration
 ## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
 MOUSEKEY_ENABLE = no # Mouse keys
 EXTRAKEY_ENABLE = yes # Audio control and System control

keyboards/chimera_ortho_plus/chimera_ortho_plus.c

@@ -0,0 +1,23 @@
+#include "chimera_ortho_plus.h"
+
+void uart_init(void) {
+	SERIAL_UART_INIT();
+}
+
+void led_init(void) {
+    setPinOutput(D1);
+    setPinOutput(F4);
+    setPinOutput(F5);
+    writePinHigh(D1);
+    writePinHigh(F4);
+    writePinHigh(F5);
+}
+
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+	matrix_init_user();
+	uart_init();
+	led_init();
+}

keyboards/chimera_ortho_plus/chimera_ortho_plus.h

@@ -0,0 +1,38 @@
+#pragma once
+
+#include "quantum.h"
+
+#define red_led_off   PORTF |= (1<<5)
+#define red_led_on    PORTF &= ~(1<<5)
+#define blu_led_off   PORTF |= (1<<4)
+#define blu_led_on    PORTF &= ~(1<<4)
+#define grn_led_off   PORTD |= (1<<1)
+#define grn_led_on    PORTD &= ~(1<<1)
+
+#define set_led_off     red_led_off; grn_led_off; blu_led_off
+#define set_led_red     red_led_on;  grn_led_off; blu_led_off
+#define set_led_blue    red_led_off; grn_led_off; blu_led_on
+#define set_led_green   red_led_off; grn_led_on;  blu_led_off
+#define set_led_yellow  red_led_on;  grn_led_on;  blu_led_off
+#define set_led_magenta red_led_on;  grn_led_off; blu_led_on
+#define set_led_cyan    red_led_off; grn_led_on;  blu_led_on
+#define set_led_white   red_led_on;  grn_led_on;  blu_led_on
+
+// This a shortcut to help you visually see your layout.
+// The first section contains all of the arguements
+// The second converts the arguments into a two-dimensional array
+
+#define LAYOUT( \
+  k00, k01, k02, k03, k04, k05,      k06, k07, k08, k09, k10, k11, \
+  k12, k13, k14, k15, k16, k17,      k18, k19, k20, k21, k22, k23, \
+  k24, k25, k26, k27, k28, k29,      k30, k31, k32, k33, k34, k35, \
+  k36, k37, k38, k39, k40, k41,      k42, k43, k44, k45, k46, k47, \
+                      k48, k49,      k50, k51 \
+) \
+{ \
+  { k03, k40, k26,   k15,   k28,   k01,   k42, k31, k20,   k33,   k08,   k10   }, \
+  { k00, k37, k14,   k27,   k16,   k36,   k47, k19, k32,   k21,   k46,   k11   }, \
+  { k12, k25, k02,   k39,   k17,   k49,   k50, k18, k44,   k09,   k34,   k23   }, \
+  { k24, k13, k38,   k04,   k05,   k48,   k51, k06, k07,   k45,   k22,   k35   }, \
+  { k29, k41, KC_NO, KC_NO, KC_NO, KC_NO, k30, k43, KC_NO, KC_NO, KC_NO, KC_NO }  \
+}

keyboards/chimera_ortho_plus/config.h

@@ -0,0 +1,76 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0xDE1D
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    unknown
+#define PRODUCT         Chimera Ortho Plus
+#define DESCRIPTION     q.m.k. keyboard firmware for Chimera Ortho Plus
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 12
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+//#define BACKLIGHT_LEVELS 3
+
+#define ONESHOT_TIMEOUT 500
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+//UART settings for communication with the RF microcontroller
+#define SERIAL_UART_BAUD 1000000
+#define SERIAL_UART_DATA UDR1
+#define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1)
+#define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1))
+#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
+#define SERIAL_UART_INIT() do { \
+    	/* baud rate */ \
+    	UBRR1L = SERIAL_UART_UBRR; \
+    	/* baud rate */ \
+    	UBRR1H = SERIAL_UART_UBRR >> 8; \
+    	/* enable TX and RX */ \
+    	UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
+    	/* 8-bit data */ \
+    	UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \
+  	} while(0)

keyboards/chimera_ortho_plus/info.json

@@ -0,0 +1,65 @@
+{
+  "keyboard_name": "Chimera Ortho Plus",
+  "keyboard_folder": "chimera_ortho_plus", 
+  "maintainer": "qmk",
+  "width": 13.5,
+  "height": 6,
+  "layouts": {
+    "LAYOUT": {
+      "layout": [
+        {"label": "{", "x": 0, "y": 0},
+        {"label": "1", "x": 1, "y": 0},
+        {"label": "2", "x": 2, "y": 0},
+        {"label": "3", "x": 3, "y": 0},
+        {"label": "4", "x": 4, "y": 0},
+        {"label": "5", "x": 5, "y": 0},
+        {"label": "6", "x": 7.5, "y": 0},
+        {"label": "7", "x": 8.5, "y": 0},
+        {"label": "8", "x": 9.5, "y": 0},
+        {"label": "9", "x": 10.5, "y": 0},
+        {"label": "0", "x": 11.5, "y": 0},
+        {"label": "}", "x": 12.5, "y": 0},
+        {"label": "Esc", "x": 0, "y": 1},
+        {"label": "Q", "x": 1, "y": 1},
+        {"label": "W", "x": 2, "y": 1},
+        {"label": "E", "x": 3, "y": 1},
+        {"label": "R", "x": 4, "y": 1},
+        {"label": "T", "x": 5, "y": 1},
+        {"label": "Y", "x": 7.5, "y": 1},
+        {"label": "U", "x": 8.5, "y": 1},
+        {"label": "I", "x": 9.5, "y": 1},
+        {"label": "O", "x": 10.5, "y": 1},
+        {"label": "P", "x": 11.5, "y": 1},
+        {"label": "\"", "x": 12.5, "y": 1},
+        {"label": "Tab", "x": 0, "y": 2},
+        {"label": "A", "x": 1, "y": 2},
+        {"label": "S", "x": 2, "y": 2},
+        {"label": "D", "x": 3, "y": 2},
+        {"label": "F", "x": 4, "y": 2},
+        {"label": "G", "x": 5, "y": 2},
+        {"label": "H", "x": 7.5, "y": 2},
+        {"label": "J", "x": 8.5, "y": 2},
+        {"label": "K", "x": 9.5, "y": 2},
+        {"label": "L", "x": 10.5, "y": 2},
+        {"label": ";", "x": 11.5, "y": 2},
+        {"label": "Enter", "x": 12.5, "y": 2},
+        {"label": "(", "x": 0, "y": 3},
+        {"label": "Z", "x": 1, "y": 3},
+        {"label": "X", "x": 2, "y": 3},
+        {"label": "C", "x": 3, "y": 3},
+        {"label": "V", "x": 4, "y": 3},
+        {"label": "B", "x": 5, "y": 3},
+        {"label": "N", "x": 7.5, "y": 3},
+        {"label": "M", "x": 8.5, "y": 3},
+        {"label": ",", "x": 9.5, "y": 3},
+        {"label": ".", "x": 10.5, "y": 3},
+        {"label": "/", "x": 11.5, "y": 3},
+        {"label": ")", "x": 12.5, "y": 3},
+        {"label": "Num Layer", "x": 4, "y": 4},
+        {"label": "Back Space", "x": 5, "y": 4},
+        {"label": "Space", "x": 7.5, "y": 4},
+        {"label": "Symbol Layer", "x": 8.5, "y": 4}
+      ]
+    }
+  }
+}

keyboards/chimera_ortho_plus/keymaps/default/config.h

@@ -0,0 +1,5 @@
+#pragma once
+
+// place overrides here
+#define LONGPRESS_DELAY 150
+//#define LAYER_TOGGLE_DELAY 300

keyboards/chimera_ortho_plus/keymaps/default/keymap.c

@@ -0,0 +1,185 @@
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+enum chimera_ortho_plus_layers {
+  _QWERTY,
+  _CAPS,
+  _NUMPAD,
+  _SYMBOLS,
+  _MACROS,
+  _NAV
+};
+
+#define KC_NMPD TG(_NUMPAD)
+#define KC_SYMB TG(_SYMBOLS)
+#define KC_SPFN LT(_NAV,KC_4)
+#define KC_SCTL MT(MOD_LCTL, KC_2)
+#define KC_SCTR MT(MOD_LCTL, KC_9)
+#define KC_SPLT MT(MOD_LALT, KC_3)
+#define KC_SPRT MT(MOD_LALT, KC_8)
+#define KC_GBRC MT(MOD_RGUI, KC_7)
+#define KC_GQOT MT(MOD_LGUI, KC_QUOT)
+#define KC_MESC LT(_MACROS, KC_ESC)
+#define KC_CAD LALT(LCTL(KC_DEL))
+
+enum custom_keycodes {
+  KC_INCL = SAFE_RANGE,
+  KC_PULL,
+  KC_PUSH,
+  KC_SCAP,
+  KC_SCOF
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_QWERTY] = LAYOUT(
+  //,-------+-------+-------+-------+-------+-------.     ,-------+-------+-------+-------+-------+-------.
+     KC_LBRC, KC_1  ,KC_SCTL,KC_SPLT,KC_SPFN, KC_5  ,       KC_6  ,KC_GBRC,KC_SPRT,KC_SCTR, KC_0  ,KC_RBRC,
+  //|-------+-------+-------+-------+-------+-------|     |-------+-------+-------+-------+-------+-------|
+     KC_MESC, KC_Q  , KC_W  , KC_E  , KC_R  , KC_T  ,       KC_Y  , KC_U  , KC_I  , KC_O  , KC_P  ,KC_QUOT,
+  //|-------+-------+-------+-------+-------+-------|     |-------+-------+-------+-------+-------+-------|
+     KC_TAB , KC_A  , KC_S  , KC_D  , KC_F  , KC_G  ,       KC_H  , KC_J  , KC_K  , KC_L  ,KC_SCLN,KC_ENT ,
+  //|-------+-------+-------+-------+-------+-------|     |-------+-------+-------+-------+-------+-------|
+     KC_LSPO, KC_Z  , KC_X  , KC_C  , KC_V  , KC_B  ,       KC_N  , KC_M  ,KC_COMM,KC_DOT ,KC_SLSH,KC_RSPC,
+  //|-------+-------+-------+-------+-------+-------|     |-------+-------+-------+-------+-------+-------|
+                                     KC_NMPD,KC_BSPC,      KC_SPC ,KC_SYMB
+  //|-------------------------------+-------+-------|     |-------+-------+-------------------------------|
+  ),
+
+  [_CAPS] = LAYOUT(
+  //,-------+-------+-------+-------+-------+-------.     ,-------+-------+-------+-------+-------+-------.
+     _______,KC_UNDS,_______,_______,_______,_______,      _______,_______,_______,_______,_______,_______,
+  //|-------+-------+-------+-------+-------+-------|     |-------+-------+-------+-------+-------+-------|
+     _______,_______,_______,_______,_______,_______,      _______,_______,_______,_______,_______,_______,
+  //|-------+-------+-------+-------+-------+-------|     |-------+-------+-------+-------+-------+-------|
+     _______,_______,_______,_______,_______,_______,      _______,_______,_______,_______,KC_COLN,_______,
+  //|-------+-------+-------+-------+-------+-------|     |-------+-------+-------+-------+-------+-------|
+     KC_SCOF,_______,_______,_______,_______,_______,      _______,_______,_______,_______,_______,KC_SCOF,
+  //|-------+-------+-------+-------+-------+-------|     |-------+-------+-------+-------+-------+-------|
+                                     _______,_______,      _______,_______
+  //|-------------------------------+-------+-------|     |-------+-------+-------------------------------|
+  ),
+
+  [_NUMPAD] = LAYOUT(
+  //,-------+-------+-------+-------+-------+-------.     ,-------+-------+-------+-------+-------+-------.
+     _______,_______,_______,_______,_______,_______,      _______,_______,_______,_______,KC_MINS,_______,
+  //|-------+-------+-------+-------+-------+-------|     |-------+-------+-------+-------+-------+-------|
+     _______,_______,KC_COLN,_______,_______,_______,      _______, KC_7  , KC_8  , KC_9  ,KC_ASTR,_______,
+  //|-------+-------+-------+-------+-------+-------|     |-------+-------+-------+-------+-------+-------|
+     _______,_______,KC_DOT ,_______,_______,_______,      _______, KC_4  , KC_5  , KC_6  ,KC_PLUS,_______,
+  //|-------+-------+-------+-------+-------+-------|     |-------+-------+-------+-------+-------+-------|
+     _______,_______,_______,_______,_______,_______,      _______, KC_1  , KC_2  , KC_3  ,KC_SLSH,_______,
+  //|-------+-------+-------+-------+-------+-------|     |-------+-------+-------+-------+-------+-------|
+                                     _______,_______,      _______, KC_0
+  //|-------------------------------+-------+-------/     |-------+-------+-------------------------------|
+  ),
+
+  [_SYMBOLS] = LAYOUT(
+  //,-------+-------+-------+-------+-------+-------.     ,-------+-------+-------+-------+-------+-------.
+     _______,_______,_______,_______,_______,_______,      _______,_______,_______,_______,_______,_______,
+  //|-------+-------+-------+-------+-------+-------|     |-------+-------+-------+-------+-------+-------|
+     _______,KC_EXLM, KC_AT ,KC_HASH,KC_DLR ,KC_PERC,      KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_BSLS,
+  //|-------+-------+-------+-------+-------+-------|     |-------+-------+-------+-------+-------+-------|
+      KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 ,      KC_TILD,KC_EQL ,KC_UNDS,KC_LCBR,KC_RCBR,_______,
+  //|-------+-------+-------+-------+-------+-------|     |-------+-------+-------+-------+-------+-------|
+      KC_F7 , KC_F8 , KC_F9 ,KC_F10 ,KC_F11 ,KC_F12 ,      KC_GRV ,KC_PLUS,KC_MINS,KC_LBRC,KC_RBRC,_______,
+  //|-------+-------+-------+-------+-------+-------|     |-------+-------+-------+-------+-------+-------|
+                                     KC_PIPE,_______,      _______,_______
+  //|-------------------------------+-------+-------|     |-------+-------+-------------------------------|
+  ),
+
+  [_MACROS] = LAYOUT(  
+  //,-------+-------+-------+-------+-------+-------.     ,-------+-------+-------+-------+-------+-------.
+     _______,_______,_______,_______,_______,_______,    _______  ,_______,_______,_______,_______,_______,
+  //|-------+-------+-------+-------+-------+-------|     |-------+-------+-------+-------+-------+-------|
+     _______,_______,_______,_______,_______,_______,    _______  ,_______,KC_INCL,_______,_______,_______,
+  //|-------+-------+-------+-------+-------+-------|     |-------+-------+-------+-------+-------+-------|
+     _______,_______,_______,KC_CAD ,_______,_______,    _______  ,_______,_______,_______,_______,_______,
+  //|-------+-------+-------+-------+-------+-------|     |-------+-------+-------+-------+-------+-------|
+     KC_SCAP,_______,_______,_______,_______,_______,    _______  ,_______,KC_PULL,KC_PUSH,_______,_______,
+  //|-------+-------+-------+-------+-------+-------|     |-------+-------+-------+-------+-------+-------|
+                                     _______,_______,      _______,_______    
+  //|-------------------------------+-------+-------|     |-------+-------+-------------------------------|
+  ),
+
+  [_NAV] = LAYOUT(  
+  //,-------+-------+-------+-------+-------+-------.     ,-------+-------+-------+-------+-------+-------.
+     _______,_______,_______,_______,_______,_______,      _______,_______,_______,_______,_______,_______,
+  //|-------+-------+-------+-------+-------+-------|     |-------+-------+-------+-------+-------+-------|
+     _______,_______,_______,_______,_______,_______,      _______,KC_PGUP, KC_UP ,KC_PGDN,KC_PSCR,_______,
+  //|-------+-------+-------+-------+-------+-------|     |-------+-------+-------+-------+-------+-------|
+     _______,_______,_______,_______,_______,_______,      _______,KC_LEFT,KC_DOWN,KC_RGHT,_______,_______,
+  //|-------+-------+-------+-------+-------+-------|     |-------+-------+-------+-------+-------+-------|
+     _______,_______,_______,_______,_______,_______,      _______,_______,_______,_______,_______,_______,
+  //|-------+-------+-------+-------+-------+-------|     |-------+-------+-------+-------+-------+-------|
+                                     _______,KC_DEL ,      _______,_______    
+  //|-------------------------------+-------+-------|     |-------+-------+-------------------------------|
+  )
+};
+
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch(keycode) {
+    /* include some kind of library or header */
+    case KC_INCL:
+      if (record->event.pressed) {
+        SEND_STRING("#include <>" SS_TAP(X_LEFT));
+      }
+      return false;
+    case KC_PULL:
+      if (record->event.pressed) {
+        SEND_STRING("git pull\n");
+      }
+      return false;
+    case KC_PUSH:
+      if (record->event.pressed){
+        SEND_STRING("git push\n");
+      }
+      return false;
+	case KC_SCAP:
+      if (record->event.pressed){
+        layer_on(_CAPS);
+        tap_code(KC_CAPS);
+      }
+      return false;
+    case KC_SCOF:
+      if (record->event.pressed){
+        layer_off(_CAPS);
+        tap_code(KC_CAPS);
+      }
+      return false;
+  }
+  return true;
+};
+ 
+
+void matrix_scan_user(void) {
+    uint8_t layer = get_highest_layer(layer_state);
+	
+    switch (layer) {
+    	case _QWERTY:
+    	    set_led_green;
+    	    break;
+	    case _CAPS:
+			set_led_white;
+			break;
+	    case _NUMPAD:
+            set_led_blue;
+            break;
+	    case _SYMBOLS:
+            set_led_red;
+            break;
+	    case _MACROS:
+			set_led_cyan;
+			break;
+		case _NAV:
+			set_led_magenta;
+			break;
+        default:
+            set_led_green;
+            break;
+    }
+};

keyboards/chimera_ortho_plus/matrix.c

@@ -0,0 +1,154 @@
+/*
+Copyright 2012 Jun Wako
+Copyright 2014 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include <stdint.h>
+#include <stdbool.h>
+#if defined(__AVR__)
+#include <avr/io.h>
+#endif
+#include "wait.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "timer.h"
+
+#if (MATRIX_COLS <= 8)
+#    define print_matrix_header()  print("\nr/c 01234567\n")
+#    define print_matrix_row(row)  print_bin_reverse8(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop(matrix[i])
+#    define ROW_SHIFTER ((uint8_t)1)
+#elif (MATRIX_COLS <= 16)
+#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF\n")
+#    define print_matrix_row(row)  print_bin_reverse16(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop16(matrix[i])
+#    define ROW_SHIFTER ((uint16_t)1)
+#elif (MATRIX_COLS <= 32)
+#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
+#    define print_matrix_row(row)  print_bin_reverse32(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop32(matrix[i])
+#    define ROW_SHIFTER  ((uint32_t)1)
+#endif
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+inline
+uint8_t matrix_rows(void) {
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void) {
+    return MATRIX_COLS;
+}
+
+void matrix_init(void) {
+
+    matrix_init_quantum();
+}
+
+uint8_t matrix_scan(void)
+{
+    SERIAL_UART_INIT();
+
+    uint32_t timeout = 0;
+
+    //the s character requests the RF slave to send the matrix
+    SERIAL_UART_DATA = 's';
+
+    //trust the external keystates entirely, erase the last data
+    uint8_t uart_data[14] = {0};
+
+    //there are 10 bytes corresponding to 10 columns, and an end byte
+    for (uint8_t i = 0; i < 14; i++) {
+        //wait for the serial data, timeout if it's been too long
+        //this only happened in testing with a loose wire, but does no
+        //harm to leave it in here
+        while(!SERIAL_UART_RXD_PRESENT){
+            timeout++;
+            if (timeout > 10000){
+                break;
+            }
+        }
+        uart_data[i] = SERIAL_UART_DATA;
+    }
+
+    //check for the end packet, the key state bytes use the LSBs, so 0xE0
+    //will only show up here if the correct bytes were recieved
+    if (uart_data[10] == 0xE0)
+    {
+        //shifting and transferring the keystates to the QMK matrix variable
+        for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+            matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 6;
+        }
+    }
+
+
+    matrix_scan_quantum();
+    return 1;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    print_matrix_header();
+
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        print_matrix_row(row);
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += matrix_bitpop(i);
+    }
+    return count;
+}

keyboards/chimera_ortho_plus/readme.md

@@ -0,0 +1,15 @@
+# Chimera Ortho+
+
+![Chimera Ortho+](https://i.imgur.com/tuDaGdTl.jpg)
+
+A split wireless 50% ortholinear keyboard.
+
+* Keyboard Maintainer: [William Wilson](https://github.com/GlenPickle)
+* Hardware Supported: Chimera Ortho+ PCB, WaveShare core nRF51822
+* Hardware Availability: [Gerbers](https://github.com/GlenPickle/Chimera/tree/master/ortho_plus/gerbers)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make chimera_ortho_plus:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/chimera_ortho_plus/rules.mk

@@ -0,0 +1,37 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
+UNICODE_ENABLE = yes
+CUSTOM_MATRIX = yes
+
+# project specific files
+SRC = matrix.c

keyboards/ergodone/keymaps/art/keymap.c

@@ -0,0 +1,446 @@
+#include "art.h"
+#include "sendstring_workman_zxcvm.h"
+
+bool is_win = true;
+
+enum custom_keycodes {
+  keyboardSpecificKeyCode = NEW_SAFE_RANGE //not used
+};
+
+void led_show_current_os(void) {
+  if (is_win) {
+    ergodox_right_led_1_on();
+    wait_ms(50);
+    ergodox_right_led_1_off();
+    wait_ms(50);
+    ergodox_right_led_1_on();
+    wait_ms(50);
+    ergodox_right_led_1_off();
+    wait_ms(50);
+    ergodox_right_led_1_on();
+    wait_ms(50);
+    ergodox_right_led_1_off();
+    wait_ms(50);
+  } else {
+    ergodox_right_led_3_on();
+    wait_ms(50);
+    ergodox_right_led_3_off();
+    wait_ms(50);
+    ergodox_right_led_3_on();
+    wait_ms(50);
+    ergodox_right_led_3_off();
+    wait_ms(50);
+    ergodox_right_led_3_on();
+    wait_ms(50);
+    ergodox_right_led_3_off();
+    wait_ms(50);
+  }
+}
+
+void matrix_init_user(void) {
+  led_show_current_os();
+}
+
+void led_set_user(uint8_t usb_led) {
+  if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+    ergodox_right_led_2_on();
+  } else {
+    ergodox_right_led_2_off();
+  }
+}
+
+
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+  ergodox_board_led_off();
+  ergodox_right_led_1_off();
+  ergodox_right_led_3_off();
+  switch (get_highest_layer(state)) {
+    case NAV:
+    case CTRL_NAV:
+    case SHIFT_NAV:
+      ergodox_right_led_1_on();
+      break;
+    case FKEYS:
+      ergodox_right_led_3_on();
+      break;
+  }
+  return state;
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Base qwerty layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |  ` ~   |   1  |   2  |   3  |   4  |   5  |  ESC |           | - _  |   6  |   7  |   8  |   9  |   0  |   ]    |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * | Tab    |   Q  |   W  |   E  |   R  |   T  | ???  |           |  =   |   Y  |   U  |   I  |   O  |   P  |   [    |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * | Caps   |   A  |   S  |   D  |   F  |   G  |------|           |------|   H  |   J  |   K  |   L  |  ;   |   '    |
+ * |--------+------+------+------+------+------| FKEYS|           | FKEYS|------+------+------+------+------+--------|
+ * | LShift |   Z  |   X  |   C  |   V  |   B  |      |           |      |   N  |   M  |   ,  |   .  | / git| RShift |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |LCtrl |Media\| Win  |Alt   | NAV  |                                       | Home | End  |Workmn|      | RCtrl|
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,---------------.
+ *                                        | Del  |  Ins |       | Left |  Right |
+ *                                 ,------|------|------|       |------+--------+------.
+ *                                 |      |      | PgUp |       |SFT_NV|        |      |
+ *                                 | Space|BSpace|------|       |------|  NAV   |Enter |
+ *                                 |      |      | PgDn |       |CTR_NV|        |      |
+ *                                 `--------------------'       `----------------------'
+ */
+[QWERTY] = LAYOUT_ergodox(
+  // -----------------------------------------------------left hand-----------------------------------------------------
+  KC_GRAVE,         KC_1,         KC_2,       KC_3,       KC_4,              KC_5,      KC_ESCAPE,
+  KC_TAB,           KC_Q,         KC_W,       KC_E,       KC_R,              KC_T,      XXXXXXX,
+  KC_CAPS,          KC_A,         KC_S,       KC_D,       KC_F,              KC_G,
+  KC_LSFT,          KC_Z,         KC_X,       KC_C,       KC_V,              KC_B,      TT(FKEYS),
+  KC_LCTRL,  LT(MEDIA, KC_BSLASH), KC_LWIN,   KC_LALT,    LT(NAV, KC_RIGHT),
+
+                                           KC_DEL,    KC_INS,
+                                                      KC_PGUP,
+                                  KC_SPC, LT(COMBOS,KC_BSPC), KC_PGDOWN,
+
+  // -----------------------------------------------------right hand-----------------------------------------------------
+  KC_MINS,          KC_6,         KC_7,       KC_8,       KC_9,              KC_0,      KC_RBRC,
+  KC_EQL,           KC_Y,         KC_U,       KC_I,       KC_O,              KC_P,      KC_LBRC,
+                    KC_H,         KC_J,       KC_K,       KC_L,              KC_SCLN,   KC_QUOT,
+  TT(FKEYS),        KC_N,         KC_M,       KC_COMM,    KC_DOT,        LT(GIT,KC_SLSH), KC_RSFT,
+                                  KC_HOME,    KC_END,     DF(WORKMAN),       KC_RALT,   KC_RCTRL,
+
+    KC_LEFT,                KC_RIGHT,
+    LT(SHIFT_NAV, KC_UP),
+    LT(CTRL_NAV, KC_DOWN),  MO(NAV),   KC_ENT
+),
+ /* Workman
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |   Q  |   D  |   R  |   W  |   B  |      |           |      |   J  |   F  |   U  |   P  |   ;  |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   A  |   S  |   H  |   T  |   G  |------|           |------|   Y  |   N  |   E  |   O  |  I   |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   Z  |   X  |   C  |   V  |   M  |      |           |      |   K  |   L  |   ,  |   .  |  /   |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |      |      |QWERTY|      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,---------------.
+ *                                        |      |      |       |      |        |
+ *                                 ,------|------|------|       |------+--------+------.
+ *                                 |      |      |      |       |      |        |      |
+ *                                 |      |      |------|       |------|        |      |
+ *                                 |      |      |      |       |      |        |      |
+ *                                 `--------------------'       `----------------------'
+ */
+[WORKMAN] = LAYOUT_ergodox(  
+  // -----------------------------------------------------left hand-----------------------------------------------------
+  _______,          _______,      _______,    _______,    _______,           _______,   _______,
+  _______,          KC_Q,         KC_D,       KC_R,       KC_W,              KC_B,      _______,
+  _______,          KC_A,         KC_S,       KC_H,       KC_T,              KC_G,
+  _______,          KC_Z,         KC_X,       KC_C,       KC_V,              KC_M,      _______,
+  _______,          _______,      _______,    _______,    _______,
+
+                                            _______,   _______,
+                                                       _______,
+                                  _______,  _______,   _______,
+
+  // -----------------------------------------------------right hand-----------------------------------------------------
+  _______,          _______,      _______,    _______,    _______,           _______,   _______,
+  _______,          KC_J,         KC_F,       KC_U,       KC_P,              KC_SCLN,   _______,
+                    KC_Y,         KC_N,       KC_E,       KC_O,              KC_I,      _______,
+  _______,          KC_K,         KC_L,       KC_COMM,    KC_DOT,            KC_SLSH,   _______,
+                                  _______,    _______,    DF(QWERTY),        _______,   _______,
+
+    _______,  _______,
+    _______,
+    _______,  _______, _______
+),
+
+[FKEYS] = LAYOUT_ergodox(
+  // -----------------------------------------------------left hand-----------------------------------------------------
+  _______,          KC_F1,            KC_F2,            KC_F3,            KC_F4,            KC_F5,          _______,
+  _______,          _______,          _______,          _______,          _______,          _______,          _______,
+  _______,          _______,          _______,          _______,          _______,          _______,
+  _______,          _______,          _______,          _______,          _______,          _______,          _______,
+  _______,          _______,          _______,          _______,          _______,
+
+                                            _______,   _______,
+                                                       _______,
+                                  _______,  _______,   _______,
+  // -----------------------------------------------------right hand-----------------------------------------------------
+  _______,          KC_F6,            KC_F7,            KC_F8,            KC_F9,            KC_F10,           KC_F11,
+  _______,          _______,          _______,          _______,          _______,          _______,          KC_F12,
+                    _______,          _______,          _______,          _______,          _______,          KC_PSCREEN,
+  _______,          _______,          _______,          _______,          _______,          _______,          _______,
+                    _______,          _______,          _______,          _______,          _______,
+
+    _______,     _______,
+    _______,
+    _______,     _______,    _______
+),
+
+[NAV] = LAYOUT_ergodox(
+  // -----------------------------------------------------left hand-----------------------------------------------------
+  _______,          LALT(KC_F1),      LALT(KC_F2),      LALT(KC_F3),      LALT(KC_F4),      LALT(KC_F5),      _______,
+  _______,          _______,          KC_HOME,          KC_UP,            KC_END,           KC_PGUP,          _______,
+  _______,          _______,          KC_LEFT,          KC_DOWN,          KC_RIGHT,         KC_PGDOWN,
+  _______,          _______,          _______,          _______,          KC_LALT,          _______,          _______,
+  _______,          _______,          _______,          _______,          _______,        
+
+                                            _______,   _______,
+                                                       _______,
+                                  _______,  KC_DEL,    _______,                               
+  // -----------------------------------------------------right hand-----------------------------------------------------
+  _______,          LALT(KC_F6),      LALT(KC_F7),      LALT(KC_F8),      LALT(KC_F9),      LALT(KC_F10),     LALT(KC_F11),
+  _______,          _______,          _______,          _______,          _______,          _______,          LALT(KC_F12),
+                    _______,          CTR_ALT,          KC_RSFT,          _______,          _______,          _______,
+  _______,          _______,          _______,          _______,          _______,          _______,          _______,
+                    _______,          _______,          _______,          _______,          _______,
+
+    _______,     _______,
+    _______,
+    _______,     _______,    _______
+),
+
+[CTRL_NAV] = LAYOUT_ergodox(
+  // -----------------------------------------------------left hand-----------------------------------------------------
+  _______,          _______,          _______,          _______,          _______,          _______,          _______,
+  _______,          _______,          CTL_ALT(KC_HOME), CTL_ALT(KC_UP),   CTL_ALT(KC_END),  CTL_ALT(KC_PGUP), _______,
+  _______,          _______,          CTL_ALT(KC_LEFT), CTL_ALT(KC_DOWN), CTL_ALT(KC_RIGHT),CTL_ALT(KC_PGDOWN),
+  _______,          _______,          CTL_ALT(KC_X),    CTL_ALT(KC_C),    CTL_ALT(KC_V),    _______,          _______,
+  _______,          _______,          _______,          _______,          _______,
+
+                                            CTL_ALT(KC_DEL),  _______,
+                                                              _______,
+                                  _______,  CTL_ALT(KC_BSPC), CTL_ALT(KC_DEL),
+  // -----------------------------------------------------right hand-----------------------------------------------------
+  _______,          _______,          _______,          _______,          _______,          _______,          _______,
+  _______,          _______,          _______,          _______,          _______,          _______,          _______,
+                    _______,          _______,          _______,          _______,          _______,          _______,
+  _______,          _______,          _______,          _______,          _______,          _______,          _______,
+                    CTL_ALT(KC_HOME), CTL_ALT(KC_END),  _______,          _______,          _______,
+
+    CTL_ALT(KC_LEFT), CTL_ALT(KC_RIGHT),
+    KC_RSFT,
+    _______,       _______,    _______
+),
+
+[SHIFT_NAV] = LAYOUT_ergodox(
+  // -----------------------------------------------------left hand-----------------------------------------------------
+  _______,          _______,          _______,          _______,          _______,          _______,          _______,
+  _______,          _______,          LSFT(KC_HOME),    LSFT(KC_UP),      LSFT(KC_END),     LSFT(KC_PGUP),    _______,
+  _______,          _______,          LSFT(KC_LEFT),    LSFT(KC_DOWN),    LSFT(KC_RIGHT),   LSFT(KC_PGDOWN),
+  _______,          _______,          _______,          _______,          _______,          _______,          _______,
+  _______,          _______,          _______,          _______,          _______,
+
+                                            _______,   _______,
+                                                       _______,
+                                  _______,  _______,   _______,
+
+
+  // -----------------------------------------------------right hand-----------------------------------------------------
+  _______,          _______,          _______,          _______,          _______,          _______,          _______,
+  _______,          _______,          _______,          _______,          _______,          _______,          _______,
+                    _______,          _______,          _______,          _______,          _______,          _______,
+  _______,          _______,          _______,          _______,          _______,          _______,          _______,
+                    LSFT(KC_HOME),    LSFT(KC_END),     _______,          _______,          _______,
+
+    LSFT(KC_LEFT), LSFT(KC_RIGHT),
+    _______,
+    CTR_ALT,       _______,    _______
+),
+
+[COMBOS] = LAYOUT_ergodox(  
+  // -----------------------------------------------------left hand-----------------------------------------------------
+  TILD_BLOCK,       PRESCRIPTION,          _______,          _______,          FOURS,          _______,          _______,
+  _______,          _______,          _______,          _______,          _______,          _______,          _______,
+  _______,          ADMINS,          SARCASM,          _______,          CTRL_CTV,         _______,
+  _______,          _______,          _______,          _______,          _______,          _______,          _______,
+  _______,          _______,          _______,          _______,          _______,
+
+                                            _______,   _______,
+                                                       _______,
+                                  _______,  _______,   _______,
+
+  // -----------------------------------------------------right hand-----------------------------------------------------
+  _______,          _______,          _______,          _______,          _______,          _______,          _______,
+  _______,          _______,          _______,          _______,          _______,          _______,          _______,
+                    _______,          _______,          _______,          _______,          _______,          _______,
+  _______,          _______,          CTRL_LCTV,        _______,          _______,          _______,          _______,
+                    _______,          _______,          _______,          _______,          _______,
+
+    _______,     _______,
+    _______,
+    _______,     _______,    _______
+),
+
+// [STRINGS] = LAYOUT_ergodox(  
+//   // -----------------------------------------------------left hand-----------------------------------------------------
+//   _______,          _______,          _______,          _______,          _______,          _______,          _______,
+//   _______,          _______,          _______,          _______,          _______,          _______,          _______,
+//   _______,          _______,          _______,          _______,          _______,          _______,
+//   _______,          _______,          _______,          _______,          _______,          _______,          _______,
+//   _______,          _______,          _______,          _______,          _______,
+
+//                                             _______,   _______,
+//                                                        _______,
+//                                   _______,  _______,   _______,
+
+//   // -----------------------------------------------------right hand-----------------------------------------------------
+//   _______,          _______,          _______,          _______,          _______,          _______,          _______,
+//   _______,          _______,          _______,          _______,          _______,          _______,          _______,
+//                     _______,          _______,          _______,          _______,          _______,          _______,
+//   _______,          _______,          _______,          _______,          _______,          _______,          _______,
+//                     _______,          _______,          _______,          _______,          _______,
+
+//     _______,     _______,
+//     _______,
+//     _______,     _______,    _______
+// ),
+
+[MEDIA] = LAYOUT_ergodox(  
+  // -----------------------------------------------------left hand-----------------------------------------------------
+  _______,          _______,          _______,          _______,          _______,          _______,          _______,
+  _______,          _______,          KC_MPRV,          KC_VOLU,          KC_MNXT,          _______,          _______,
+  _______,          _______,          _______,          KC_VOLD,          _______,          _______,
+  _______,          _______,          _______,          KC_MUTE,          KC_MPLY,          _______,          _______,
+  _______,          _______,          _______,          _______,          _______,
+
+                                            _______,   _______,
+                                                       _______,
+                                  _______,  _______,   _______,
+
+  // -----------------------------------------------------right hand-----------------------------------------------------
+  _______,          _______,          _______,          _______,          _______,          _______,          _______,
+  _______,          _______,          _______,          _______,          _______,          _______,          _______,
+                    _______,          _______,          _______,          TOG_OS,           _______,          _______,
+  _______,          _______,          _______,          _______,          _______,          _______,          _______,
+                    _______,          _______,          _______,          _______,          _______,
+
+    _______,     _______,
+    _______,
+    _______,     _______,    _______
+),
+
+[GIT] = LAYOUT_ergodox(  
+  // -----------------------------------------------------left hand-----------------------------------------------------
+  _______,          _______,          _______,          _______,          _______,          _______,          _______,
+  _______,          _______,          G_DIFF,           G_RST,            _______,          G_BRCH,          _______,
+  _______,          G_ADD,            G_S,              _______,          _______,          _______,
+  _______,          _______,          _______,          G_C,              _______,          G_MERG,          _______,
+  _______,          _______,          _______,          _______,          _______,
+
+                                            _______,   _______,
+                                                       _______,
+                                  _______,  _______,   _______,
+
+  // -----------------------------------------------------right hand-----------------------------------------------------
+  _______,          _______,          _______,          _______,          _______,          _______,          _______,
+  _______,          _______,          G_FTCH,           _______,          G_P,              _______,          _______,
+                    _______,          _______,          _______,          _______,          _______,          _______,
+  _______,          _______,          G_LOG,            _______,          G_DEV,            _______,          _______,
+                    _______,          _______,          _______,          _______,          _______,
+
+    _______,     _______,
+    _______,
+    _______,     _______,    _______
+),
+
+[GIT_C] = LAYOUT_ergodox(  
+  // -----------------------------------------------------left hand-----------------------------------------------------
+  XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,
+  XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,
+  XXXXXXX,          XXXXXXX,          XXXXXXX,          G_CHEC,           XXXXXXX,          XXXXXXX,
+  _______,          XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,
+  XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,
+
+                                            XXXXXXX,   XXXXXXX,
+                                                       XXXXXXX,
+                                  XXXXXXX,  KC_BSPC,   XXXXXXX,
+
+  // -----------------------------------------------------right hand-----------------------------------------------------
+  XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,
+  XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,
+                    XXXXXXX,          XXXXXXX,          XXXXXXX,          G_COMM,           XXXXXXX,          XXXXXXX,
+  XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,          _______,
+                    XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,
+
+    XXXXXXX,     XXXXXXX,
+    XXXXXXX,
+    XXXXXXX,     XXXXXXX,    XXXXXXX
+),
+
+[GIT_S] = LAYOUT_ergodox(  
+  // -----------------------------------------------------left hand-----------------------------------------------------
+  XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,
+  XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,
+  XXXXXXX,          XXXXXXX,          G_STSH,           G_SHOW,           G_STAT,           XXXXXXX,
+  _______,          XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,
+  XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,
+
+                                            XXXXXXX,   XXXXXXX,
+                                                       XXXXXXX,
+                                  XXXXXXX,  KC_BSPC,   XXXXXXX,
+
+  // -----------------------------------------------------right hand-----------------------------------------------------
+  XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,
+  XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,
+                    XXXXXXX,          XXXXXXX,          XXXXXXX,          G_COMM,           XXXXXXX,          XXXXXXX,
+  XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,          _______,
+                    XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,          XXXXXXX,
+
+    XXXXXXX,     XXXXXXX,
+    XXXXXXX,
+    XXXXXXX,     XXXXXXX,    XXXXXXX
+),
+
+
+/* Numpad
+ *
+ *           ,--------------------------------------------------.
+ *           |      |      |      |      |      |   /  |        |
+ *           |------+------+------+------+------+------+--------|
+ *           |      |      |   7  |   8  |   9  |   *  |        |
+ *           |      |------+------+------+------+------+--------|
+ *           |------|      |   4  |   5  |   6  |   -  |  Enter |
+ *           |      |------+------+------+------+------+--------|
+ *           |      |      |   1  |   2  |   3  |   +  |  Enter |
+ *           `-------------+------+------+------+------+--------'
+ *                         |      |   0  |   .  | Calc | Calc   |
+ *                         `----------------------------------'
+ */
+
+// [] = LAYOUT_ergodox(  
+//   // -----------------------------------------------------left hand-----------------------------------------------------
+//   _______,          _______,          _______,          _______,          _______,          _______,          _______,
+//   _______,          _______,          _______,          _______,          _______,          _______,          _______,
+//   _______,          _______,          _______,          _______,          _______,          _______,
+//   _______,          _______,          _______,          _______,          _______,          _______,          _______,
+//   _______,          _______,          _______,          _______,          _______,
+
+//                                             _______,   _______,
+//                                                        _______,
+//                                   _______,  _______,   _______,
+
+//   // -----------------------------------------------------right hand-----------------------------------------------------
+//   _______,          _______,          _______,          _______,          _______,          _______,          _______,
+//   _______,          _______,          _______,          _______,          _______,          _______,          _______,
+//                     _______,          _______,          _______,          _______,          _______,          _______,
+//   _______,          _______,          _______,          _______,          _______,          _______,          _______,
+//                     _______,          _______,          _______,          _______,          _______,
+
+//     _______,     _______,
+//     _______,
+//     _______,     _______,    _______
+// ),
+
+};
+
+bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+
+  }
+  return true;
+}

keyboards/handwired/k8split/README.md

@@ -0,0 +1,21 @@
+# k8split
+![left](https://raw.githubusercontent.com/Ckath/k8split/master/k8split_left.png)
+![right](https://raw.githubusercontent.com/Ckath/k8split/master/k8split_right.png)
+
+my personal 8x6(x2) split keyboard, aiming to be a mostly normal keyboard layout with plenty of keys. see the hardware repo for more info.
+
+* Keyboard Maintainer: [Ckath](https://github.com/Ckath)
+* Hardware: https://github.com/Ckath/k8split
+
+Make example for this keyboard (after setting up your build environment):
+
+    make handwired/k8split:default
+
+Flashing (both halves are separate keyboards and the default layout is just for debugging):
+
+    # left
+    make handwired/k8split:left:flash
+    # right
+    make handwired/k8split:right:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/handwired/k8split/config.h

@@ -0,0 +1,48 @@
+/*
+Copyright 2020 Ckat <ckat@teknik.io>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xC81D
+#define PRODUCT_ID      0xC868
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Ckat
+#define PRODUCT         k8split
+#define DESCRIPTION     custom split keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 8
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D5, D3, D2, D1, D0, B7 }
+#define MATRIX_COL_PINS { C7, C6, B6, B5, B4, D7, D6, D4 }
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW

keyboards/handwired/k8split/k8split.c

@@ -0,0 +1,18 @@
+/*
+Copyright 2020 Ckat <ckat@teknik.io>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "k8split.h"

keyboards/handwired/k8split/k8split.h

@@ -0,0 +1,37 @@
+/*
+Copyright 2020 Ckat <ckat@teknik.io>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+    k00, k06, k12, k18, k24, k30, k36, k42, \
+    k01, k07, k13, k19, k25, k31, k37, k43, \
+    k02, k08, k14, k20, k26, k32, k38, k44, \
+    k03, k09, k15, k21, k27, k33, k39, k45, \
+    k04, k10, k16, k22, k28, k34, k40, k46, \
+    k05, k11, k17, k23, k29, k35, k41, k47 \
+) \
+{ \
+    { k00, k06, k12, k18, k24, k30, k36, k42 }, \
+    { k01, k07, k13, k19, k25, k31, k37, k43 }, \
+    { k02, k08, k14, k20, k26, k32, k38, k44 }, \
+    { k03, k09, k15, k21, k27, k33, k39, k45 }, \
+    { k04, k10, k16, k22, k28, k34, k40, k46 }, \
+    { k05, k11, k17, k23, k29, k35, k41, k47 } \
+}

keyboards/handwired/k8split/keymaps/default/keymap.c

@@ -0,0 +1,33 @@
+/*
+Copyright 2020 Ckat <ckat@teknik.io>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+/* DEBUG
+   default map is strictly for debugging shorts
+   flash either the left or right keymap accordingly */
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_0, KC_5, KC_0, KC_5, KC_0, KC_5, KC_0, KC_5,
+        KC_1, KC_4, KC_1, KC_4, KC_1, KC_4, KC_1, KC_4,
+        KC_2, KC_3, KC_2, KC_3, KC_2, KC_3, KC_2, KC_3,
+        KC_3, KC_2, KC_3, KC_2, KC_3, KC_2, KC_3, KC_2,
+        KC_4, KC_1, KC_4, KC_1, KC_4, KC_1, KC_4, KC_1,
+        KC_5, KC_0, KC_5, KC_0, KC_5, KC_0, KC_5, KC_0 
+    )
+};

keyboards/handwired/k8split/keymaps/left/config.h

@@ -0,0 +1,21 @@
+/*
+Copyright 2020 Ckat <ckat@teknik.io>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* ensure NKRO is on */
+#define FORCE_NKRO

keyboards/handwired/k8split/keymaps/left/keymap.c

@@ -0,0 +1,47 @@
+/*
+Copyright 2020 Ckat <ckat@teknik.io>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+#define KC_AUDIO_MMUTE KC_F20
+#define KC_COMP KC_APP
+
+/* LEFT
+   +---------------------------------------+
+   | ESC| F1 | F2 | F3 | F4 | F5 | F6 |MUTE|
+   +---------------------------------------|
+   | `  | 1  | 2  | 3  | 4  | 5  | 6  |MMIC| 
+   +-----------------------------------------+
+   | TAB  | q  | w  | e  | r  | t  | JP | MWU|
+   +------------------------------------------+
+   | CTRL  | a  | s  | d  | f  | g  |COMP| MWD|
+   +---------------------------------------------|
+   | SHIFT    | z  | x  | c  | v  | b  | F13| F14|
+   +-------------------------------------------------+
+   | CTRL |CAPS|SUPR| ALT |   SPACE   | F15| F16| F17|
+   +-------------------------------------------------+ */
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_AUDIO_MUTE,
+        KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_AUDIO_MMUTE,
+        KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_MHEN, KC_MS_WH_UP,
+        KC_LCTRL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_COMP, KC_MS_WH_DOWN,
+        KC_LSHIFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_F13, KC_F14,
+        KC_LCTRL, KC_CAPS, KC_LWIN, KC_LALT, KC_SPC, KC_F15, KC_F16, KC_F17
+    )
+};

keyboards/handwired/k8split/keymaps/right/config.h

@@ -0,0 +1,21 @@
+/*
+Copyright 2020 Ckat <ckat@teknik.io>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* ensure NKRO is on */
+#define FORCE_NKRO

keyboards/handwired/k8split/keymaps/right/keymap.c

@@ -0,0 +1,45 @@
+/*
+Copyright 2020 Ckat <ckat@teknik.io>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+/* RIGHT
+            +---------------------------------------+
+            | F7 | F8 | F9 | F10| F11| F12| INS|PSCR|
+       +--------------------------------------------|
+       | DEL| 7  | 8  | 9  | 0  | -  | =  |  BCKSPC | 
+       +--------------------------------------------|
+          | y  | u  | i  | o  | p  | [  | ]  |   \  |
+      +---------------------------------------------|
+      |PGUP| h  | j  | k  | l  | ;  | '  |    ENTER |
+    +-----------------------------------------------|
+    |HOME|PGDN| n  | m  | ,  | .  | /  |      SHIFT |
+  +-------------------------------------------------+
+  | END|   SPACE   | ALT | <- | ↓  | ↑  | -> | CTRL |
+  +-------------------------------------------------+ */
+
+/* /!\: rows are reversed in this half because I did all pcb design drunk */
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_END, KC_SPC, KC_RALT, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_RCTRL,
+        KC_HOME, KC_PGDN, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSHIFT,
+        KC_PGUP, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENTER,
+        KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+        KC_DEL, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
+        KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_PSCR
+    )
+};

keyboards/handwired/k8split/rules.mk

@@ -0,0 +1,31 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches

keyboards/kyria/keymaps/asapjockey/config.h

@@ -0,0 +1,47 @@
+/* Copyright 2019 Thomas Baart <thomas@splitkb.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#ifdef OLED_DRIVER_ENABLE
+  #define OLED_DISPLAY_128X64
+#endif
+
+#ifdef RGBLIGHT_ENABLE
+  #define RGBLIGHT_ANIMATIONS
+  #define RGBLIGHT_HUE_STEP 8
+  #define RGBLIGHT_SAT_STEP 8
+  #define RGBLIGHT_VAL_STEP 8
+  #define RGBLIGHT_SLEEP
+#endif
+
+// EC11K encoders have a different resolution than other EC11 encoders.
+// When using the default resolution of 4, if you notice your encoder skipping
+// every other tick, lower the resolution to 2.
+#define ENCODER_RESOLUTION 2
+
+// The Leader key allows to flexibly assign macros to key sequences.
+#define LEADER_PER_KEY_TIMING
+#define LEADER_TIMEOUT 350
+
+#define TAPPING_TERM 200
+
+// Allows to use either side as the master. Look at the documentation for info:
+// https://docs.qmk.fm/#/config_options?id=setting-handedness
+#define EE_HANDS
+
+// Allows media codes to properly register in macros and rotary encoder code
+#define TAP_CODE_DELAY 10

keyboards/kyria/keymaps/asapjockey/keymap.c

@@ -0,0 +1,312 @@
+/* Copyright 2019 Thomas Baart <thomas@splitkb.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+enum layers {
+    QWERTY,
+    LOWER,
+    RAISE,
+    NAV,
+    ADJUST
+};
+
+enum custom_keycodes {
+    KC_LBR = SAFE_RANGE,
+    KC_RBR
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* 
+ * Base Layer: QWERTY
+ *
+ * ,-------------------------------------------.                              ,-------------------------------------------.
+ * | TAB    |   Q  |   W  |   E  |   R  |   T  |                              |   Y  |   U  |   I  |   O  |   P  | RCTL   |
+ * |--------+------+------+------+------+------|                              |------+------+------+------+------+--------|
+ * | LCTL   |   A  |   S  |  D   |   F  |   G  |                              |   H  |   J  |   K  |   L  | ;  : |  ' "   |
+ * |--------+------+------+------+------+------+-------------.  ,-------------+------+------+------+------+------+--------|
+ * | LSFT   |   Z  |   X  |   C  |   V  |   B  | Del  | Raise|  |Adjust| Esc  |   N  |   M  | ,  < | . >  | /  ? | LSFT   |
+ * `----------------------+------+------+------+------+------|  |------+------+------+------+------+----------------------'
+ *                        |      | LALT |      | Bspc | Lower|  | Enter| Space| [ {  | ] }  |      |
+ *                        |      |      |      |      |      |  |      |      |      |      |      |
+ *                        `----------------------------------'  `----------------------------------'
+ */
+    [QWERTY] = LAYOUT(
+      KC_TAB,  KC_Q,   KC_W,   KC_E,   KC_R,    KC_T,                                                KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_RCTL,
+      KC_LCTL, KC_A,   KC_S,   KC_D,   KC_F,    KC_G,                                                KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+      KC_LSFT, KC_Z,   KC_X,   KC_C,   KC_V,    KC_B,    KC_DEL,  MO(RAISE), MO(ADJUST), KC_ESC,     KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_LSFT,
+                            XXXXXXX,   KC_LALT, XXXXXXX, KC_BSPC, MO(LOWER), KC_ENT,     KC_SPC,     KC_LBR,  KC_RBR,  XXXXXXX
+    ),
+/*
+ * Lower Layer: Numbers, functions, symbols
+ *
+ * ,-------------------------------------------.                              ,-------------------------------------------.
+ * |        | 1 !  | 2 @  | 3 #  | 4 $  | 5 %  |                              | 6 ^  | 7 &  | 8 *  | 9 (  | 0 )  |        |
+ * |--------+------+------+------+------+------|                              |------+------+------+------+------+--------|
+ * |        | !    | @    | #    | $    | %    |                              | ^    | &    | *    | (    | )    |        |
+ * |--------+------+------+------+------+------+-------------.  ,-------------+------+------+------+------+------+--------|
+ * |        | F1   | F2   | F3   | F4   | F5   |      |      |  |      |      | F6   | F7   | F8   | F9   | F10  |        |
+ * `----------------------+------+------+------+------+------|  |------+------+------+------+------+----------------------'
+ *                        |      |      |      |      |      |  |      |      | (    | )    |      |
+ *                        |      |      |      |      |      |  |      |      |      |      |      |
+ *                        `----------------------------------'  `----------------------------------'
+ */
+    [LOWER] = LAYOUT(
+      _______, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                                        KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    _______,
+      _______, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,                                     KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______,
+      _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   _______, _______, _______, _______, KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  _______,
+                                 _______, _______, _______, _______, _______, _______, _______, KC_LPRN, KC_RPRN, _______
+    ),
+/*
+ * Raise Layer: Functions, Numbers
+ *
+ * ,-------------------------------------------.                              ,-------------------------------------------.
+ * |        |      | F7   | F8   | F9   |      |                              |      | 7 &  | 8 *  | 9 (  | - _  |        |
+ * |--------+------+------+------+------+------|                              |------+------+------+------+------+--------|
+ * |        |      | F4   | F5   | F6   |      |                              |      | 4 *  | 5 %  | 6 ^  | = +  | RCTL   |
+ * |--------+------+------+------+------+------+-------------.  ,-------------+------+------+------+------+------+--------|
+ * |        |      | F1   | F2   | F3   |      |      |      |  |      |      |      | 1 !  | 2 @  | 3 #  | \ |  |        |
+ * `----------------------+------+------+------+------+------|  |------+------+------+------+------+----------------------'
+ *                        |      |      |      |      |      |  |      |      | 0 )  |      |      |
+ *                        |      |      |      |      |      |  |      |      |      |      |      |
+ *                        `----------------------------------'  `----------------------------------'
+ */
+    [RAISE] = LAYOUT(
+      _______, _______, KC_F7,   KC_F8,   KC_F9,   _______,                                     _______, KC_7,    KC_8,    KC_9,    _______, _______,
+      _______, _______, KC_F4,   KC_F5,   KC_F6,   _______,                                     _______, KC_4,    KC_5,    KC_6,    _______, KC_RCTL,
+      _______, _______, KC_F1,   KC_F2,   KC_F3,   _______, _______, _______, _______, _______, _______, KC_1,    KC_2,    KC_3,    _______, _______,
+                                 _______, _______, _______, _______, _______, _______, _______, KC_0,    _______, _______
+    ),
+/*
+ * Navigation Layer
+ *
+ * ,-------------------------------------------.                              ,-------------------------------------------.
+ * |        |      |      |      |      |      |                              |      |      | Up   |      |      | RGBTOG |
+ * |--------+------+------+------+------+------|                              |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |                              |      | Left | Down | Right|      | RGBOFF |
+ * |--------+------+------+------+------+------+-------------.  ,-------------+------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |      |  |      |      |      |      |      |      |      | RGBON  |
+ * `----------------------+------+------+------+------+------|  |------+------+------+------+------+----------------------'
+ *                        |      |      |      |      |      |  |      |      | Reset|Debug |      |
+ *                        |      |      |      |      |      |  |      |      |      |      |      |
+ *                        `----------------------------------'  `----------------------------------'
+ */
+    [ADJUST] = LAYOUT(
+      _______, _______, _______, _______, _______, _______,                                     _______, _______, KC_UP,   _______, _______, RGB_TOG,
+      _______, _______, _______, _______, _______, _______,                                     _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, RGB_HUI,
+      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_HUD,
+                                 _______, _______, _______, _______, _______, _______, _______, RESET,   DEBUG,   _______
+    ),
+// /*
+//  * Layer template
+//  *
+//  * ,-------------------------------------------.                              ,-------------------------------------------.
+//  * |        |      |      |      |      |      |                              |      |      |      |      |      |        |
+//  * |--------+------+------+------+------+------|                              |------+------+------+------+------+--------|
+//  * |        |      |      |      |      |      |                              |      |      |      |      |      |        |
+//  * |--------+------+------+------+------+------+-------------.  ,-------------+------+------+------+------+------+--------|
+//  * |        |      |      |      |      |      |      |      |  |      |      |      |      |      |      |      |        |
+//  * `----------------------+------+------+------+------+------|  |------+------+------+------+------+----------------------'
+//  *                        |      |      |      |      |      |  |      |      |      |      |      |
+//  *                        |      |      |      |      |      |  |      |      |      |      |      |
+//  *                        `----------------------------------'  `----------------------------------'
+//  */
+//     [_LAYERINDEX] = LAYOUT(
+//       _______, _______, _______, _______, _______, _______,                                     _______, _______, _______, _______, _______, _______,
+//       _______, _______, _______, _______, _______, _______,                                     _______, _______, _______, _______, _______, _______,
+//       _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+//                                  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+//     ),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case KC_LBR: {
+            if (record->event.pressed) {
+                if ((get_mods() & MOD_MASK_SHIFT) == MOD_MASK_SHIFT) {
+                    register_code(KC_9);
+                } else {
+                    register_code(KC_LBRC);
+                }
+            } else { // Release the key
+                if ((get_mods() & MOD_MASK_SHIFT) == MOD_MASK_SHIFT) {
+                    unregister_code(KC_9);
+                } else {
+                    unregister_code(KC_LBRC);
+                }
+            }
+            return false;
+            break;
+        }
+        case KC_RBR: {
+            if (record->event.pressed) {
+                if ((get_mods() & MOD_MASK_SHIFT) == MOD_MASK_SHIFT) {
+                    register_code(KC_0);
+                } else {
+                    register_code(KC_RBRC);
+                }
+            } else { // Release the key
+                if ((get_mods() & MOD_MASK_SHIFT) == MOD_MASK_SHIFT) {
+                    unregister_code(KC_0);
+                } else {
+                    unregister_code(KC_RBRC);
+                }
+            }
+            return false;
+            break;
+        }
+    }
+    return true;
+}
+
+LEADER_EXTERNS();
+
+void matrix_scan_user(void) {
+    LEADER_DICTIONARY() {
+        leading = false;
+        leader_end();
+
+        SEQ_ONE_KEY(KC_F) { // Shift + Ctrl + F
+            tap_code16(S(C(KC_F)));
+        }
+    }
+}
+
+#ifdef OLED_DRIVER_ENABLE
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+	return OLED_ROTATION_180;
+}
+
+static void render_kyria_logo(void) {
+    static const char PROGMEM kyria_logo[] = {
+        0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,128,128,192,224,240,112,120, 56, 60, 28, 30, 14, 14, 14,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7, 14, 14, 14, 30, 28, 60, 56,120,112,240,224,192,128,128,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+        0,  0,  0,  0,  0,  0,  0,192,224,240,124, 62, 31, 15,  7,  3,  1,128,192,224,240,120, 56, 60, 28, 30, 14, 14,  7,  7,135,231,127, 31,255,255, 31,127,231,135,  7,  7, 14, 14, 30, 28, 60, 56,120,240,224,192,128,  1,  3,  7, 15, 31, 62,124,240,224,192,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+        0,  0,  0,  0,240,252,255, 31,  7,  1,  0,  0,192,240,252,254,255,247,243,177,176, 48, 48, 48, 48, 48, 48, 48,120,254,135,  1,  0,  0,255,255,  0,  0,  1,135,254,120, 48, 48, 48, 48, 48, 48, 48,176,177,243,247,255,254,252,240,192,  0,  0,  1,  7, 31,255,252,240,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+        0,  0,  0,255,255,255,  0,  0,  0,  0,  0,254,255,255,  1,  1,  7, 30,120,225,129,131,131,134,134,140,140,152,152,177,183,254,248,224,255,255,224,248,254,183,177,152,152,140,140,134,134,131,131,129,225,120, 30,  7,  1,  1,255,255,254,  0,  0,  0,  0,  0,255,255,255,  0,  0,  0,  0,255,255,  0,  0,192,192, 48, 48,  0,  0,240,240,  0,  0,  0,  0,  0,  0,240,240,  0,  0,240,240,192,192, 48, 48, 48, 48,192,192,  0,  0, 48, 48,243,243,  0,  0,  0,  0,  0,  0, 48, 48, 48, 48, 48, 48,192,192,  0,  0,  0,  0,  0,
+        0,  0,  0,255,255,255,  0,  0,  0,  0,  0,127,255,255,128,128,224,120, 30,135,129,193,193, 97, 97, 49, 49, 25, 25,141,237,127, 31,  7,255,255,  7, 31,127,237,141, 25, 25, 49, 49, 97, 97,193,193,129,135, 30,120,224,128,128,255,255,127,  0,  0,  0,  0,  0,255,255,255,  0,  0,  0,  0, 63, 63,  3,  3, 12, 12, 48, 48,  0,  0,  0,  0, 51, 51, 51, 51, 51, 51, 15, 15,  0,  0, 63, 63,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 48, 48, 63, 63, 48, 48,  0,  0, 12, 12, 51, 51, 51, 51, 51, 51, 63, 63,  0,  0,  0,  0,  0,
+        0,  0,  0,  0, 15, 63,255,248,224,128,  0,  0,  3, 15, 63,127,255,239,207,141, 13, 12, 12, 12, 12, 12, 12, 12, 30,127,225,128,  0,  0,255,255,  0,  0,128,225,127, 30, 12, 12, 12, 12, 12, 12, 12, 13,141,207,239,255,127, 63, 15,  3,  0,  0,128,224,248,255, 63, 15,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+        0,  0,  0,  0,  0,  0,  0,  3,  7, 15, 62,124,248,240,224,192,128,  1,  3,  7, 15, 30, 28, 60, 56,120,112,112,224,224,225,231,254,248,255,255,248,254,231,225,224,224,112,112,120, 56, 60, 28, 30, 15,  7,  3,  1,128,192,224,240,248,124, 62, 15,  7,  3,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+        0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  3,  7, 15, 14, 30, 28, 60, 56,120,112,112,112,224,224,224,224,224,224,224,224,224,224,224,224,224,224,224,224,112,112,112,120, 56, 60, 28, 30, 14, 15,  7,  3,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0
+    };
+    oled_write_raw_P(kyria_logo, sizeof(kyria_logo));
+}
+
+static void render_qmk_logo(void) {
+  static const char PROGMEM qmk_logo[] = {
+    0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94,
+    0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4,
+    0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,0};
+
+  oled_write_P(qmk_logo, false);
+}
+
+static void render_status(void) {
+    // QMK Logo and version information
+    render_qmk_logo();
+    oled_write_P(PSTR("       Kyria rev1.0\n\n"), false);
+
+    // Host Keyboard Layer Status
+    oled_write_P(PSTR("Layer: "), false);
+    switch (get_highest_layer(layer_state)) {
+        case QWERTY:
+            oled_write_P(PSTR("Default\n"), false);
+            break;
+        case LOWER:
+            oled_write_P(PSTR("Lower\n"), false);
+            break;
+        case RAISE:
+            oled_write_P(PSTR("Raise\n"), false);
+            break;
+        case NAV:
+            oled_write_P(PSTR("Navigation\n"), false);
+            break;
+        case ADJUST:
+            oled_write_P(PSTR("Adjust\n"), false);
+            break;
+        default:
+            oled_write_P(PSTR("Undefined\n"), false);
+    }
+
+    // Host Keyboard LED Status
+    led_t led_state = host_keyboard_led_state();
+    oled_write_P(led_state.num_lock ? PSTR("NUMLCK ") : PSTR("       "), false);
+    oled_write_P(led_state.caps_lock ? PSTR("CAPLCK ") : PSTR("       "), false);
+    oled_write_P(led_state.scroll_lock ? PSTR("SCRLCK ") : PSTR("       "), false);
+}
+
+void oled_task_user(void) {
+    if (is_keyboard_master()) {
+        render_status(); // Renders the current keyboard state (layer, lock, caps, scroll, etc)
+    } else {
+        render_kyria_logo();
+    }
+}
+#endif
+
+#ifdef ENCODER_ENABLE
+void encoder_update_user(uint8_t index, bool clockwise) {
+    if (index == 0) {
+        switch (get_highest_layer(layer_state)) {
+            case QWERTY:
+                if (clockwise) { // Ctrl + I
+                    tap_code16(C(KC_I));
+                } else { // Shift + F3
+                    tap_code16(S(KC_F3));
+                }
+                break;
+            case LOWER:
+                // History scrubbing. For Adobe products, hold shift while moving
+                // backward to go forward instead.
+                if (clockwise) {
+                    tap_code16(C(KC_Y));
+                } else {
+                    tap_code16(C(KC_Z));
+                }
+                break;
+            case RAISE:
+                 if (clockwise) { // Subscript: CTRL + =
+                    tap_code16(C(KC_EQL));
+                }
+                break;
+            default:
+                // Nothing
+                break;
+        }
+    } else if (index == 1) {
+        switch (get_highest_layer(layer_state)) {
+            case QWERTY:
+                // Scroll by letter horizontally
+                if (clockwise) {
+                    tap_code16(KC_RGHT);
+                } else {
+                    tap_code16(KC_LEFT);
+                }
+            case LOWER:
+                // Nothing
+                break;
+            case RAISE:
+                // Find previous/Find next
+                if (clockwise) {
+                    tap_code(KC_F3);
+                } else {
+                    tap_code16(S(KC_F3));
+                }
+            default:
+                // Nothing
+                break;
+        }
+    }
+}
+#endif

keyboards/kyria/keymaps/asapjockey/rules.mk

@@ -0,0 +1,5 @@
+OLED_DRIVER_ENABLE = yes   # Enables the use of OLED displays
+ENCODER_ENABLE = yes       # Enables the use of one or more encoders
+RGBLIGHT_ENABLE = yes      # Enable keyboard RGB underglow
+LEADER_ENABLE = yes        # Enable the Leader Key feature
+MOUSEKEY_ENABLE = no

keyboards/kyria/keymaps/default/rules.mk

@@ -1,3 +1,3 @@
 OLED_DRIVER_ENABLE = yes   # Enables the use of OLED displays
-ENCODER_ENABLE = yes       # ENables the use of one or more encoders
+ENCODER_ENABLE = yes       # Enables the use of one or more encoders
 RGBLIGHT_ENABLE = yes      # Enable keyboard RGB underglow

keyboards/kyria/keymaps/thomasbaart/keymap.c

@@ -173,9 +173,20 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
     return true;
 }
 
+
+bool is_alt_tab_active = false;
+uint16_t alt_tab_timer = 0;
+
 LEADER_EXTERNS();
 
 void matrix_scan_user(void) {
+    if (is_alt_tab_active) {
+        if (timer_elapsed(alt_tab_timer) > 1000) {
+            unregister_code(KC_LALT);
+            is_alt_tab_active = false;
+        }
+    }
+
     LEADER_DICTIONARY() {
         leading = false;
         leader_end();
@@ -192,7 +203,13 @@ void matrix_scan_user(void) {
         SEQ_TWO_KEYS(KC_F, KC_P) { // Fusion Projection prefix
             SEND_STRING("[Projection] ");
         }
-        SEQ_TWO_KEYS(KC_E, KC_S) { // Email splitkb
+        SEQ_TWO_KEYS(KC_B, KC_B) { // Basecone invoice description
+            SEND_STRING("[Leveranciersnaam] [Factuurnummer]");
+        }
+        SEQ_TWO_KEYS(KC_E, KC_S) { // Support email splitkb
+            SEND_STRING("support@splitkb.com");
+        }
+        SEQ_TWO_KEYS(KC_E, KC_T) { // Email splitkb
             SEND_STRING("thomas@splitkb.com");
         }
         SEQ_TWO_KEYS(KC_E, KC_P) { // Email personal
@@ -204,15 +221,18 @@ void matrix_scan_user(void) {
         SEQ_TWO_KEYS(KC_S, KC_V) { // Splitkb VAT number
             SEND_STRING("NL210593349B01");
         }
-        SEQ_THREE_KEYS(KC_S, KC_D, KC_K) { // Splitkb Kyria build log
-            SEND_STRING("https://docs.splitkb.com/docs/kyria-build-log/");
-        }
         SEQ_TWO_KEYS(KC_B, KC_C) { // Discord bongocat
             SEND_STRING(":bongocat:\n");
         }
         SEQ_TWO_KEYS(KC_C, KC_B) { // Discord code block
             SEND_STRING("```c" SS_LSFT("\n\n") "``` " SS_TAP(X_UP));
         }
+        SEQ_TWO_KEYS(KC_Y, KC_S) { // Greeting
+            SEND_STRING("Yours sincerely,\n\nThomas Baart");
+        }
+        SEQ_THREE_KEYS(KC_M, KC_V, KC_G) { // Greeting
+            SEND_STRING("Met vriendelijke groet,\n\nThomas Baart");
+        }
     }
 }
 
@@ -292,14 +312,6 @@ void encoder_update_user(uint8_t index, bool clockwise) {
     if (index == 0) {
         switch (biton32(layer_state)) {
             case QWERTY:
-                // Move whole words. Hold shift to select while moving.
-                if (clockwise) {
-                    tap_code16(C(KC_RGHT));
-                } else {
-                    tap_code16(C(KC_LEFT));
-                }
-                break;
-            default:
                 // History scrubbing. For Adobe products, hold shift while moving
                 // backward to go forward instead.
                 if (clockwise) {
@@ -308,6 +320,19 @@ void encoder_update_user(uint8_t index, bool clockwise) {
                     tap_code16(C(KC_Y));
                 }
                 break;
+            default:
+                // Switch between windows on Windows with alt tab.
+                if (clockwise) {
+                    if (!is_alt_tab_active) {
+                        is_alt_tab_active = true;
+                        register_code(KC_LALT);
+                    } 
+                    alt_tab_timer = timer_read();
+                    tap_code16(KC_TAB);
+                } else {
+                    tap_code16(S(KC_TAB));
+                }
+                break;
         }
     } else if (index == 1) {
         switch (biton32(layer_state)) {

keyboards/tada68/config.h

@@ -37,8 +37,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS {F0,F1,E6,C7,C6,B7,D4,B1,B0,B5,B4,D7,D6,B3,F4}
 #define UNUSED_PINS
 
-#define BACKLIGHT_PIN B6
-
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
@@ -53,8 +51,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* Backlight configuration
- */
+/* Backlight configuration */
+#define BACKLIGHT_PIN B6
+#define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 4
 
 /*

keyboards/the_royal/liminal/keymaps/via/keymap.c

@@ -0,0 +1,57 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+LAYOUT_base_kit_all(
+        KC_ESC,    KC_TAB,    KC_Q,      KC_W,      KC_E,      KC_R,      KC_T,      KC_Y,      KC_U,      KC_I,      KC_O,      KC_P,      KC_MINUS,  KC_BSPC,
+        KC_PGUP,   KC_LCTL,   KC_A,      KC_S,      KC_D,      KC_F,      KC_G,      KC_H,      KC_J,      KC_K,      KC_L,      KC_SCLN,   KC_QUOTE,  KC_ENT,
+        KC_PGDN,   KC_LSFT,   KC_NUBS,   KC_Z,      KC_X,      KC_C,      KC_V,      KC_B,      KC_N,      KC_M,      KC_COMM,   KC_DOT,    KC_SLSH,   MO(3),
+        KC_END,    KC_DEL,    KC_LGUI,   KC_LALT,                         MO(1),                KC_SPACE,             KC_CAPS,   MO(2),     KC_MENU,   KC_RCTL
+    ),
+
+LAYOUT_base_kit_all(
+        KC_GRAVE,  _______,   KC_1,      KC_2,      KC_3,      KC_4,      KC_5,      KC_6,      KC_7,      KC_8,      KC_9,      KC_0,      KC_UNDS,   _______,
+        KC_TILD,   _______,   KC_EXLM,   KC_AT,     KC_HASH,   KC_DLR,    KC_PERC,   KC_CIRC,   KC_AMPR,   KC_ASTR,   KC_LPRN,   KC_RPRN,   KC_DQT,    _______,
+        _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,
+        _______,   _______,   _______,   _______,                         _______,              _______,              _______,   _______,   _______,   _______
+    ),
+
+LAYOUT_base_kit_all(
+        KC_BSLS,   _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,   KC_EQUAL,  _______,
+        KC_PIPE,   KC_CAPS,   _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,   KC_PLUS,   _______,
+        _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,   KC_LBRC,   KC_RBRC,   _______,
+        _______,   _______,   _______,   _______,                         _______,              _______,              _______,   _______,   _______,   _______
+    ),
+
+LAYOUT_base_kit_all(
+        _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,   KC_UP,     _______,   _______,
+        _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,   KC_LEFT,   KC_RGHT,   _______,   _______,
+        _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,   KC_DOWN,   _______,   _______,
+        _______,   _______,   _______,   _______,                         _______,              _______,              _______,   _______,   _______,   _______
+    )
+
+};
+
+
+
+void keyboard_post_init_user(void) {
+    layer_state_set_user(layer_state);
+}
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+    switch (get_highest_layer(state)) {
+    case 1:
+        rgblight_setrgb (RGB_CORAL);
+        break;
+    case 2:
+        rgblight_setrgb (RGB_RED);
+        break;
+    case 3:
+        rgblight_setrgb (RGB_BLUE);
+        break;
+    default: //  for any other layers, or the default layer
+        rgblight_setrgb (RGB_GREEN);
+        break;
+    }
+  return state;
+}

keyboards/the_royal/liminal/keymaps/via/readme.md

@@ -0,0 +1,3 @@
+# The VIA keymap for the Liminal Keyboard
+
+This keymap is for compatibility with the VIA configurator.

keyboards/the_royal/liminal/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/wheatfield/split75/keymaps/art/keymap.c

@@ -1,16 +1,95 @@
-#include QMK_KEYBOARD_H
+#include <art.h>
+#include <sendstring_workman_zxcvm.h>
 
-enum layer_names {
-    BASE,
-    QWERTY_MOD,
-    QWERTY,
-    WORKMAN,
-    MOD,
-    MEDIA
+bool is_win = false;
+
+enum custom_keycodes {
+  keyboardSpecificKeyCode = NEW_SAFE_RANGE //not used atm
 };
 
+bool led_update_user(led_t led_state) {
+  writePin(CAPSLOCK_LED_PIN, led_state.caps_lock);
+  return false;
+}
+
+void led_show_current_os(void) {
+  if (is_win) {
+    writePinHigh(NUMLOCK_LED_PIN);
+    wait_ms(50);
+    writePinLow(NUMLOCK_LED_PIN);
+    wait_ms(50);
+    writePinHigh(NUMLOCK_LED_PIN);
+    wait_ms(50);
+    writePinLow(NUMLOCK_LED_PIN);
+    wait_ms(50);
+    writePinHigh(NUMLOCK_LED_PIN);
+    wait_ms(50);
+    writePinLow(NUMLOCK_LED_PIN);
+    wait_ms(50);
+  } else {
+    writePinHigh(SCROLLLOCK_LED_PIN);
+    wait_ms(50);
+    writePinLow(SCROLLLOCK_LED_PIN);
+    wait_ms(50);
+    writePinHigh(SCROLLLOCK_LED_PIN);
+    wait_ms(50);
+    writePinLow(SCROLLLOCK_LED_PIN);
+    wait_ms(50);
+    writePinHigh(SCROLLLOCK_LED_PIN);
+    wait_ms(50);
+    writePinLow(SCROLLLOCK_LED_PIN);
+    wait_ms(50);
+  }
+}
+
+void keyboard_pre_init_user(void) {
+  led_show_current_os();
+  
+  layer_state_set_user(layer_state);
+}
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+  writePinLow(NUMLOCK_LED_PIN);
+  writePinLow(SCROLLLOCK_LED_PIN);
+  switch (get_highest_layer(state)) {
+    case MEDIA:
+      writePinHigh(SCROLLLOCK_LED_PIN);
+    case BASE:
+      writePinHigh(NUMLOCK_LED_PIN);
+      break;
+    case NUMPAD:
+      writePinHigh(SCROLLLOCK_LED_PIN);
+      break;
+  }
+  return state;
+}
+
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
+  /* QWERTY        ,-----------------------------------------.     ,-----------------------------------------------------.
+  *                | ESC | F1  | F2  | F3  | F4  | F5  | F6  |     | F7  | F8  | F9  | F10 | F11 | F12 |Print| Ins | Home|
+  * ,-----------.  |-----+-----+-----+-----+-----+-----+-----|     |-----+-----+-----+-----+-----+-----+-----------+-----|
+  * |  8  |  9  |  |  ~  |  1  |  2  |  3  |  4  |  5  |  6  |     |  7  |  8  |  9  |  0  |  -  |  =  | Backspac  | Del |
+  * |-----+-----|  |-----------------------------------------'  ,--------------------------------------------------+-----|
+  * |  6  |  7  |  | Tab   |  Q  |  W  |  E  |  R  |  T  |     |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |    \    | End |
+  * |-----+-----|  |---------------------------------------.    `--------------------------------------------------+-----|
+  * |  4  |  5  |  | Caps    |  A  |  S  |  D  |  F  |  G  |     |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter    | PgUp|
+  * |-----+-----|  |-----------------------------------------.   `-------------------------------------------------+-----|
+  * |  2  |  3  |  | Shift     |  Z  |  X  |  C  |  V  |  B  |     |  N  |  M  |  ,  |  .  |   /   |  Shift  | Up  | PgDn|
+  * |-----+-----|  |-----------------------------------------'   ,-------------------------------------------+-----+-----|
+  * |  0  |  1  |  | Ctrl  |  GUI |  Alt |Spac/MEDIA | BSPC|     |      NAV      |  Alt  | NAV | Ctrl  | Left| Down|Right|
+  * `-----------'  `---------------------------------------'     `-------------------------------------------------------'
+  */
+  [QWERTY] = LAYOUT(
+//--------------------------------Left Hand------------------------------------| |--------------------------------Right Hand------------------------------------------------
+                 KC_ESC,   KC_F1,   KC_F2,   KC_F3,  KC_F4,  KC_F5,  KC_F6,                KC_F7,  KC_F8,   KC_F9,  KC_F10,  KC_F11,   KC_F12,   LT(CONFIG, KC_PSCR),  KC_INS,  KC_HOME,
+KC_VOLD,KC_VOLU, KC_GRAVE, KC_1,    KC_2,    KC_3,   KC_4,   KC_5,   KC_6,                 KC_7,   KC_8,    KC_9,   KC_0,    KC_MINUS, KC_EQUAL, KC_BSPC,          KC_DEL,
+KC_MPRV,KC_MNXT, KC_TAB,   KC_Q,    KC_W,    KC_E,   KC_R,   KC_T,                 KC_Y,   KC_U,   KC_I,    KC_O,   KC_P,    KC_LBRC,  KC_RBRC,  KC_BSLS,           KC_END,
+KC_HOME,KC_END,  KC_CAPS,  KC_A,    KC_S,    KC_D,   KC_F,   KC_G,   KC_H,   KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,KC_ENTER,         KC_PGUP,
+DYN_MACRO_PLAY1,MO(STRINGS),KC_LSFT,KC_Z,KC_X,KC_C,  KC_V,   KC_B,                 KC_N,   KC_M,   KC_COMM, KC_DOT, LT(GIT,KC_SLSH),                     KC_RSFT,  KC_UP,   KC_PGDN,
+DYN_REC_STOP,DYN_REC_START1,KC_LCTL, KC_LGUI, KC_LALT, LT(MEDIA,KC_SPC), LT(COMBOS,KC_BSPC),            LT(NAV, KC_ENTER),        KC_RALT, MO(LAYOUT_CHG),KC_RCTL,                     KC_LEFT,  KC_DOWN, KC_RIGHT
+  ),
+
   /* Base          ,-----------------------------------------.     ,-----------------------------------------------------.
   *                | ESC | F1  | F2  | F3  | F4  | F5  | F6  |     | F7  | F8  | F9  | F10 | F11 | F12 |Print| Ins | Home|
   * ,-----------.  |-----+-----+-----+-----+-----+-----+-----|     |-----+-----+-----+-----+-----+-----+-----------+-----|
@@ -27,28 +106,64 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   */
   [BASE] = LAYOUT(
 //--------------------------------Left Hand-----------------------------------| |--------------------------------Right Hand------------------------------------------------
-                KC_ESC,   KC_F1,   KC_F2,   KC_F3,  KC_F4,  KC_F5,  KC_F6,                KC_F7,  KC_F8,   KC_F9,  KC_F10,  KC_F11,   KC_F12,   KC_PSCR,  KC_INS,  KC_HOME,
+                KC_ESC,   KC_F1,   KC_F2,   KC_F3,  KC_F4,  KC_F5,  KC_F6,                KC_F7,  KC_F8,   KC_F9,  KC_F10,  KC_F11,   KC_F12,   LT(CONFIG, KC_PSCR),  KC_INS,  KC_HOME,
 KC_8,  KC_9,    KC_GRAVE, KC_1,    KC_2,    KC_3,   KC_4,   KC_5,   KC_6,                 KC_7,   KC_8,    KC_9,   KC_0,    KC_MINUS, KC_EQUAL, KC_BSPC,           KC_DEL,
 KC_6,  KC_7,    KC_TAB,   KC_Q,    KC_W,    KC_E,   KC_R,   KC_T,                 KC_Y,   KC_U,   KC_I,    KC_O,   KC_P,    KC_LBRC,  KC_RBRC,  KC_BSLS,           KC_END,
 KC_4,  KC_5,    KC_CAPS,  KC_A,    KC_S,    KC_D,   KC_F,   KC_G,                 KC_H,   KC_J,   KC_K,    KC_L,   KC_SCLN, KC_QUOT,  KC_ENTER,                    KC_PGUP,
 KC_2,  KC_3,    KC_LSFT,  KC_Z,    KC_X,    KC_C,   KC_V,   KC_B,                 KC_N,   KC_M,   KC_COMM, KC_DOT, KC_SLSH,                     KC_RSFT,  KC_UP,   KC_PGDN,
-KC_0,  KC_1,    KC_LCTL,  KC_LGUI, KC_LALT, KC_SPC, KC_SPC,                       KC_SPC,         KC_RALT, MO(QWERTY_MOD),  KC_RCTL,            KC_LEFT,  KC_DOWN, KC_RIGHT
+KC_0,  KC_1,    OS_CTRL,  OS_WIN,  KC_LALT, KC_SPC, KC_SPC,                       KC_SPC,         KC_RALT, MO(QWERTY_MOD),  KC_RCTL,            KC_LEFT,  KC_DOWN, KC_RIGHT
   ),
 
-  /*QWERT On + Mod ,-----------------------------------------.     ,-----------------------------------------------------.
-  *                |     |     |     |     |     |     |     |     |     |     |     |     |     |     |     |     |     |
-  * ,-----------.  |-----+-----+-----+-----+-----+-----+-----|     |-----+-----+-----+-----+-----+-----+-----------+-----|
-  * |     |     |  |     |     |     |     |     |     |     |     |     |     |     |     |     |     |           |     |
-  * |-----+-----|  |-----------------------------------------'  ,--------------------------------------------------+-----|
-  * |     |     |  |       |MePrv| Vol+|MeNxt|     |     |     |     |     |     |     |     |     |     |         |     |
-  * |-----+-----|  |---------------------------------------.    `--------------------------------------------------+-----|
-  * |     |     |  |         |     | Vol-|     |     |     |     |     |     |     |     |     |     |             |     |
-  * |-----+-----|  |-----------------------------------------.   `-------------------------------------------------+-----|
-  * |     |     |  |           |     | Vol0|MePly|     |     |     |     |     |     |     |       |         |     |     |
-  * |-----+-----|  |-----------------------------------------'   ,-------------------------------------------+-----+-----|
-  * |     |     |  | QWERTY |      |      |           |     |     |               |       |     |       |     |     |    |
-  * `-----------'  `---------------------------------------'     `-------------------------------------------------------'
-  */
+  [WORKMAN] = LAYOUT(
+//--------------------------------Left Hand-----------------------------------------------| |--------------------------------Right Hand------------------------------------------------
+                      _______,  _______,  _______,  _______,  _______,  _______,  _______,              _______,   _______,  _______,  _______,  _______,  _______,  _______,  _______, _______,
+_______,  _______,    _______,  _______,  _______,  _______,  _______,  _______,  _______,              _______,   _______,  _______,  _______,  _______,  _______,  _______,           _______,
+_______,  _______,    _______,  KC_Q,     KC_D,     KC_R,     KC_W,     KC_B,                 KC_J,     KC_F,      KC_U,     KC_P,     KC_SCLN,  _______,  _______,  _______,           _______,
+_______,  _______,    _______,  KC_A,     KC_S,     KC_H,     KC_T,     KC_G,                 KC_Y,     KC_N,      KC_E,     KC_O,     KC_I,     _______,  _______,           _______,
+_______,  _______,    _______,  KC_Z,     KC_X,     KC_C,     KC_V,     KC_M,                 KC_K,     KC_L,      KC_COMM,  KC_DOT,   _______,                      _______, _______,  _______,
+_______,  _______,    _______, _______,   _______,  _______,  _______,                        _______,             _______,  TO(QWERTY), _______,           _______, _______,  _______
+  ),
+  
+  [NAV] = LAYOUT(
+//--------------------------------Left Hand-----------------------------------------------| |--------------------------------Right Hand------------------------------------------------
+                _______,  _______,  _______,  _______,  _______,  _______,  _______,              _______,   _______,  _______,  _______,  _______,  _______,  _______,  _______, _______,
+KC_8,  KC_9,    _______,  _______,  _______,  _______,  _______,  _______,  _______,              _______,   _______,  _______,  _______,  _______,  _______,  _______,           _______,
+KC_6,  KC_7,    _______,  _______,  KC_HOME,  KC_UP,    KC_END,   KC_PGUP,              _______,  _______,   _______,  _______,  _______,  _______,  _______,  _______,           _______,
+KC_4,  KC_5,    _______,  _______,  KC_LEFT,  KC_DOWN,  KC_RIGHT, KC_PGDOWN,            _______,  CTR_ALT,   KC_RSFT,  _______,  _______,  _______,  _______,            _______,
+KC_2,  KC_3,    _______,  _______,  _______,  _______,  _______,  _______,              _______,  _______,   _______,  _______,  _______,                      _______,  _______, _______,
+KC_0,  KC_1,    _______,  _______,  _______,  KC_DEL,   _______,                        _______,             _______,  _______,  _______,            _______,  _______,  _______
+  ),
+  
+  [MEDIA] = LAYOUT(
+//--------------------------------Left Hand-----------------------------------------------| |--------------------------------Right Hand------------------------------------------------
+                      _______,  _______,  _______,  _______,  _______,  _______,  _______,              _______,   _______,  _______,  _______,  _______,  _______,  _______,  _______, _______,
+_______,  _______,    _______,  _______,  _______,  _______,  _______,  _______,  _______,              _______,   _______,  _______,  _______,  _______,  _______,  _______,           _______,
+_______,  _______,    _______,  KC_MPRV,  KC_VOLU,  KC_MNXT,  _______,  _______,              _______,  _______,   _______,  _______,  _______,  _______,  _______,  _______,           _______,
+_______,  _______,    _______,  _______,  KC_VOLD,  _______,  _______,  _______,              _______,  _______,   _______,  _______,  _______,  _______,  _______,                     _______,
+_______,  _______,    _______,  _______,  KC_MUTE,  KC_MPLY,  _______,  _______,              _______,  _______,   _______,  _______,  _______,                      _______, _______,  _______,
+_______,  _______,    _______,  _______,  _______,  _______,  _______,                        _______,             _______, _______,   _______,                      _______, _______,  _______
+  ),
+  
+  [COMBOS] = LAYOUT(
+//--------------------------------Left Hand-----------------------------------------------| |--------------------------------Right Hand------------------------------------------------
+                      _______,  _______,  _______,  _______,  _______,  _______,  _______,              _______,   _______,  _______,  _______,  _______,  _______,  _______,  _______, _______,
+_______,  _______,    _______,  _______,  _______,  _______,  _______,  _______,  _______,              _______,   _______,  _______,  _______,  _______,  _______,  _______,           _______,
+_______,  _______,    _______,  _______,  _______,  _______,  _______,  _______,              _______,  _______,   _______,  _______,  _______,  _______,  _______,  _______,           _______,
+_______,  _______,    _______,  _______,  SARCASM,  _______,  CTRL_CTV, _______,              _______,  _______,   _______,  _______,  _______,  _______,  _______,                     _______,
+_______,  _______,    _______,  _______,  _______,  CTRL_CAV, _______,  _______,              _______,  CTRL_LCTV, _______,  _______,  _______,                      _______, _______,  _______,
+_______,  _______,    _______,  _______,  _______,  _______,  _______,                        _______,             _______, _______,   _______,                      _______, _______,  _______
+  ),
+  
+  [STRINGS] = LAYOUT(
+//--------------------------------Left Hand-----------------------------------------------| |--------------------------------Right Hand------------------------------------------------
+                      _______,  _______,  _______,  _______,  _______,  _______,  _______,              _______,   _______,  _______,  _______,  _______,  _______,  _______,  _______, _______,
+_______,  _______,    TILD_BLOCK, PRESCRIPTION,  _______,  _______,  FOURS,  _______,  _______,              _______,   _______,  _______,  _______,  _______,  _______,  _______,           _______,
+_______,  _______,    _______,  _______,  _______,  _______,  _______,  _______,              _______,  _______,   _______,  _______,  _______,  _______,  _______,  _______,           _______,
+_______,  _______,    _______,  ADMINS,   _______,  _______,  _______,  _______,              _______,  _______,   _______,  _______,  _______,  _______,  _______,                     _______,
+_______,  _______,    _______,  _______,  _______,  _______,  _______,  _______,              _______,  _______,   _______,  _______,  _______,                      _______, _______,  _______,
+_______,  _______,    _______,  _______,  _______,  _______,  _______,                        _______,             _______, _______,   _______,                      _______, _______,  _______
+  ),  
+
   [QWERTY_MOD] = LAYOUT(
 //--------------------------------Left Hand-----------------------------------------------| |--------------------------------Right Hand------------------------------------------------
                       _______,  _______,  _______,  _______,  _______,  _______,  _______,              _______,   _______,  _______,  _______,  _______,  _______,  _______,  _______, _______,
@@ -58,80 +173,68 @@ _______,  _______,    _______,  _______,  KC_VOLD,  _______,  _______,  _______,
 _______,  _______,    _______,  _______,  KC_MUTE,  KC_MPLY,  _______,  _______,              _______,  _______,   _______,  _______,  _______,                      _______, _______,  _______,
 _______,  _______,    TO(QWERTY),_______, _______,  _______,  _______,                        _______,             _______, _______,   _______,                      _______, _______,  _______
   ),
-
-  /* QWERTY        ,-----------------------------------------.     ,-----------------------------------------------------.
-  *                | ESC | F1  | F2  | F3  | F4  | F5  | F6  |     | F7  | F8  | F9  | F10 | F11 | F12 |Print| Ins | Home|
-  * ,-----------.  |-----+-----+-----+-----+-----+-----+-----|     |-----+-----+-----+-----+-----+-----+-----------+-----|
-  * |  8  |  9  |  |  ~  |  1  |  2  |  3  |  4  |  5  |  6  |     |  7  |  8  |  9  |  0  |  -  |  =  | Backspac  | Del |
-  * |-----+-----|  |-----------------------------------------'  ,--------------------------------------------------+-----|
-  * |  6  |  7  |  | Tab   |  Q  |  W  |  E  |  R  |  T  |     |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |    \    | End |
-  * |-----+-----|  |---------------------------------------.    `--------------------------------------------------+-----|
-  * |  4  |  5  |  | Caps    |  A  |  S  |  D  |  F  |  G  |     |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter    | PgUp|
-  * |-----+-----|  |-----------------------------------------.   `-------------------------------------------------+-----|
-  * |  2  |  3  |  | Shift     |  Z  |  X  |  C  |  V  |  B  |     |  N  |  M  |  ,  |  .  |   /   |  Shift  | Up  | PgDn|
-  * |-----+-----|  |-----------------------------------------'   ,-------------------------------------------+-----+-----|
-  * |  0  |  1  |  | Ctrl  |  GUI |  Alt |Spac/MEDIA | BSPC|     |      MOD      |  Alt  | MOD | Ctrl  | Left| Down|Right|
-  * `-----------'  `---------------------------------------'     `-------------------------------------------------------'
-  */
-  [QWERTY] = LAYOUT(
-//--------------------------------Left Hand------------------------------------| |--------------------------------Right Hand------------------------------------------------
-                KC_ESC,   KC_F1,   KC_F2,   KC_F3,  KC_F4,  KC_F5,  KC_F6,                KC_F7,  KC_F8,   KC_F9,  KC_F10,  KC_F11,   KC_F12,   KC_PSCR,  KC_INS,  KC_HOME,
-KC_8,  KC_9,    KC_GRAVE, KC_1,    KC_2,    LGUI_T(KC_3),   LALT_T(KC_4),   LCTL_T(KC_5),   KC_6,                 KC_7,   LCTL_T(KC_8),    LALT_T(KC_9),   LGUI_T(KC_0),    KC_MINUS, KC_EQUAL, KC_BSPC,           KC_DEL,
-KC_6,  KC_7,    KC_TAB,   KC_Q,    KC_W,    KC_E,   KC_R,   KC_T,                 KC_Y,   KC_U,   KC_I,    KC_O,   KC_P,    KC_LBRC,  KC_RBRC,  KC_BSLS,           KC_END,
-KC_4,  KC_5,    KC_CAPS,  KC_A,    KC_S ,KC_D ,KC_F ,KC_G,   KC_H,   KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,KC_ENTER,         KC_PGUP,
-KC_2,  KC_3,    KC_LSFT,  KC_Z,    KC_X,    KC_C,   KC_V,   KC_B,                 KC_N,   KC_M,   KC_COMM, KC_DOT, KC_SLSH,                     KC_RSFT,  KC_UP,   KC_PGDN,
-KC_0,  KC_1,    KC_LCTL,  KC_LGUI, KC_LALT, LT(MEDIA, KC_SPC),KC_BSPC,            MO(MOD),        KC_RALT, MO(MOD),KC_RCTL,                     KC_LEFT,  KC_DOWN, KC_RIGHT
+  
+  [LAYOUT_CHG] = LAYOUT(
+//--------------------------------Left Hand-----------------------------------------------| |--------------------------------Right Hand------------------------------------------------
+                      _______,  _______,  _______,  _______,  _______,  _______,  _______,              _______,   _______,  _______,  _______,  _______,  _______,  _______,  _______, _______,
+_______,  _______,    _______,  _______,  _______,  _______,  _______,  _______,  _______,              _______,   _______,  _______,  _______,  _______,  _______,  _______,           _______,
+_______,  _______,    _______,  _______,  CTL_ALT(KC_HOME),  CTL_ALT(KC_UP),    CTL_ALT(KC_END),   CTL_ALT(KC_PGUP),              _______,  _______,_______, _______,_______,_______,_______,  _______,           _______,
+_______,  _______,    _______,  _______,  CTL_ALT(KC_LEFT),  CTL_ALT(KC_DOWN),  CTL_ALT(KC_RIGHT), CTL_ALT(KC_PGDOWN),              _______,_______,_______,_______,_______,  _______,  _______,           _______,
+_______,  _______,    TO(WORKMAN),  _______,  _______,  _______,  _______,  _______,              _______,  _______,   _______,  _______,  _______,                      _______, _______,  _______,
+TO(NUMPAD), TO(NUMPAD), TO(BASE),  _______,  _______,  _______,  CTL_ALT(KC_BSPC),                KC_LSFT,             _______, _______, _______,                      _______, _______,  _______
+  ),  
+  
+  [CONFIG] = LAYOUT(
+//--------------------------------Left Hand-----------------------------------------------| |--------------------------------Right Hand------------------------------------------------
+                      _______,  _______,  _______,  _______,  _______,  _______,  _______,              _______,   _______,  _______,  _______,  _______,  _______,  _______,  _______, _______,
+RGB_VAI,  RGB_VAD,    RGB_MODE_PLAIN,  RGB_MODE_BREATHE,  RGB_MODE_RAINBOW,  RGB_MODE_SWIRL,  RGB_MODE_SNAKE,  RGB_MODE_KNIGHT,  RGB_MODE_XMAS,              RGB_MODE_GRADIENT,   RGB_MODE_RGBTEST,  XXXXXXX,  XXXXXXX,  _______,  _______,  _______,           _______,
+RGB_SAI,  RGB_SAD,    _______,  _______,  _______,  _______,  _______,  _______,              _______,  _______,   _______,  TOG_OS,  _______,  _______,  _______,  _______,           _______,
+RGB_HUI,  RGB_HUD,    _______,  _______,  _______,  _______,  _______,  _______,              _______,  _______,   _______,  _______,  _______,  _______,  _______,                     _______,
+RGB_MOD,  RGB_RMOD,   _______,  _______,  _______,  _______,  _______,  _______,              _______,  _______,   _______,  _______,  _______,                      _______, _______,  _______,
+RGB_TOG,  _______,    _______,  _______,  _______,  _______,  _______,                        _______,             _______, _______,   _______,                      _______, _______,  _______
   ),
 
-  /*    WORKMAN    ,-----------------------------------------.     ,-----------------------------------------------------.
-  *                |     |     |     |     |     |     |     |     |     |     |     |     |     |     |     |     |     |
-  * ,-----------.  |-----+-----+-----+-----+-----+-----+-----|     |-----+-----+-----+-----+-----+-----+-----------+-----|
-  * |     |     |  |     |     |     |     |     |     |     |     |     |     |     |     |     |     |           |     |
-  * |-----+-----|  |-----------------------------------------'  ,--------------------------------------------------+-----|
-  * |     |     |  |       |     |     |     |     |     |     |     |     |     |     |     |     |     |         |     |
-  * |-----+-----|  |---------------------------------------.    `--------------------------------------------------+-----|
-  * |     |     |  |         |     |     |     |     |     |     |     |     |     |     |     |     |             |     |
-  * |-----+-----|  |-----------------------------------------.   `-------------------------------------------------+-----|
-  * |     |     |  |           |     |     |     |     |     |     |     |     |     |     |       |         |     |     |
-  * |-----+-----|  |-----------------------------------------'   ,-------------------------------------------+-----+-----|
-  * |     |     |  | BASE  |      |      |           |     |     |               |       |     |       |     |     |     |
-  * `-----------'  `---------------------------------------'     `-------------------------------------------------------'
-  */
-  [WORKMAN] = LAYOUT(
+  [NUMPAD] = LAYOUT(
 //--------------------------------Left Hand-----------------------------------------------| |--------------------------------Right Hand------------------------------------------------
-                      _______,  _______,  _______,  _______,  _______,  _______,  _______,              _______,   _______,  _______,  _______,  _______,  _______,  _______,  _______, _______,
-_______,  _______,    _______,  _______,  _______,  _______,  _______,  _______,  _______,              _______,   _______,  _______,  _______,  _______,  _______,  _______,           _______,
-_______,  _______,    _______,  KC_Q,     KC_D,		KC_R,     KC_W,     KC_B,              KC_J,   KC_F,		KC_U,   KC_P,   KC_SCLN,_______,_______,  _______,           _______,
-_______,  _______,    _______,  KC_A,     KC_S,		KC_H,     KC_T,     KC_G,              KC_Y,   KC_N,		KC_E,   KC_O,   KC_I,  _______,  _______,           _______,
-_______,  _______,    _______,  KC_Z,     KC_X,		KC_C,     KC_V,     KC_M,              KC_K,   KC_L,		KC_COMM,KC_DOT, KC_SLSH,                      _______, _______,  _______,
-_______,  _______,    TO(BASE), _______,_______,_______, _______,                        _______,             _______, TO(QWERTY),   _______,            _______, _______,  _______
+                _______,  _______,  _______,  _______,  _______,  _______,  _______,              _______,   _______,  _______,  _______,  _______,  _______,  _______,  _______, _______,
+KC_8,  KC_9,    _______,  _______,  _______,  _______,  _______,  _______,  _______,              _______,   _______,  _______,  _______,  _______,  _______,  _______,           _______,
+KC_6,  KC_7,    _______,  _______,  _______,  _______,  _______,  _______,              _______,  _______,   _______,  _______,  _______,  _______,  _______,  _______,           _______,
+KC_4,  KC_5,    _______,  _______,  _______,  _______,  _______,  _______,              _______,  _______,   _______,  _______,  _______,  _______,  _______,                     _______,
+KC_2,  KC_3,    _______,  _______,  _______,  _______,  _______,  _______,              _______,  _______,   _______,  _______,  _______,                      _______, _______,  _______,
+KC_0,  KC_1,    _______,  _______,  _______,  _______,  _______,                        _______,             _______, TO(QWERTY),_______,                      _______, _______,  _______
   ),
   
-  /*    MOD        ,-----------------------------------------.     ,-----------------------------------------------------.
-  *                |     |     |     |     |     |     |     |     |     |     |     |     |     |     |     |     |     |
-  * ,-----------.  |-----+-----+-----+-----+-----+-----+-----|     |-----+-----+-----+-----+-----+-----+-----------+-----|
-  * |     |     |  |     |     |     |     |     |     |     |     |     |     |     |     |     |     |           |     |
-  * |-----+-----|  |-----------------------------------------'  ,--------------------------------------------------+-----|
-  * |     |     |  |       |     |     |     |     |     |     |     |     |     |     |     |     |     |         |     |
-  * |-----+-----|  |---------------------------------------.    `--------------------------------------------------+-----|
-  * |     |     |  |         |     |     |     |     |     |     |     |     |     |     |     |     |             |     |
-  * |-----+-----|  |-----------------------------------------.   `-------------------------------------------------+-----|
-  * |     |     |  |           |     |     |     |     |     |     |     |     |     |     |       |         |     |     |
-  * |-----+-----|  |-----------------------------------------'   ,-------------------------------------------+-----+-----|
-  * |     |     |  | BASE  |      |      |           |     |     |               |       |     |       |     |     |     |
-  * `-----------'  `---------------------------------------'     `-------------------------------------------------------'
-  */
-  [MOD] = LAYOUT(
+  [GIT] = LAYOUT(
 //--------------------------------Left Hand-----------------------------------------------| |--------------------------------Right Hand------------------------------------------------
                       _______,  _______,  _______,  _______,  _______,  _______,  _______,              _______,   _______,  _______,  _______,  _______,  _______,  _______,  _______, _______,
 _______,  _______,    _______,  _______,  _______,  _______,  _______,  _______,  _______,              _______,   _______,  _______,  _______,  _______,  _______,  _______,           _______,
-_______,  _______,    _______,  _______,  KC_HOME,  KC_UP,    KC_END,   KC_PGUP,              _______,  KC_MS_BTN1,KC_MS_UP, KC_MS_BTN3,KC_MS_BTN2,_______,_______,  _______,           _______,
-_______,  _______,    _______,  _______,  KC_LEFT,  KC_DOWN,  KC_RIGHT, KC_PGDOWN,              _______,KC_MS_LEFT,KC_MS_DOWN,KC_MS_RIGHT,KC_APPLICATION,  _______,  _______,           _______,
-_______,  _______,    _______,  _______,  _______,  _______,  _______,  _______,              _______,  _______,   _______,  _______,  _______,                      _______, _______,  _______,
-_______,  TO(WORKMAN),TO(BASE), KC_MS_ACCEL0,KC_MS_ACCEL1,KC_MS_ACCEL2, _______,                        _______,             _______, _______,   _______,            _______, _______,  _______
+_______,  _______,    _______,  _______,  G_DIFF,   G_RST,    _______,  G_BRCH,               _______,   G_FTCH,   _______,  G_P,      _______,  _______,  _______,  _______,           _______,
+_______,  _______,    _______,  G_ADD,    G_S,      _______,  _______,  _______,              _______,  _______,   _______,  _______,  _______,  _______,  _______,                     _______,
+_______,  _______,    _______,  _______,  _______,  G_C,      _______,  G_MERG,               _______,   G_LOG,    _______,  G_DEV,    _______,                      _______, _______,  _______,
+_______,  _______,    _______,  _______,  _______,  _______,  _______,                        _______,             _______,  _______,  _______,                      _______, _______,  _______
   ),
   
-  /*    MEDIA      ,-----------------------------------------.     ,-----------------------------------------------------.
+  [GIT_C] = LAYOUT(
+//--------------------------------Left Hand-----------------------------------------------| |--------------------------------Right Hand------------------------------------------------
+                      XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,              XXXXXXX,   XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX, XXXXXXX,
+XXXXXXX,  XXXXXXX,    XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,              XXXXXXX,   XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  _______,           XXXXXXX,
+XXXXXXX,  XXXXXXX,    XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,              XXXXXXX,  XXXXXXX,   XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,           XXXXXXX,
+XXXXXXX,  XXXXXXX,    XXXXXXX,  XXXXXXX,  XXXXXXX,  G_CHEC,   XXXXXXX,  XXXXXXX,              XXXXXXX,  XXXXXXX,   XXXXXXX,  G_COMM,   XXXXXXX,  XXXXXXX,  XXXXXXX,                     XXXXXXX,
+XXXXXXX,  XXXXXXX,    _______,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,              XXXXXXX,  XXXXXXX,   XXXXXXX,  XXXXXXX,  XXXXXXX,                      _______, XXXXXXX,  XXXXXXX,
+XXXXXXX,  XXXXXXX,    XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  KC_BSPC,                        XXXXXXX,             XXXXXXX,  XXXXXXX,  XXXXXXX,                      XXXXXXX, XXXXXXX,  XXXXXXX
+  ),
+  
+  [GIT_S] = LAYOUT(
+//--------------------------------Left Hand-----------------------------------------------| |--------------------------------Right Hand------------------------------------------------
+                      XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,              XXXXXXX,   XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX, XXXXXXX,
+XXXXXXX,  XXXXXXX,    XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,              XXXXXXX,   XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  _______,           XXXXXXX,
+XXXXXXX,  XXXXXXX,    XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,              XXXXXXX,  XXXXXXX,   XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,           XXXXXXX,
+XXXXXXX,  XXXXXXX,    XXXXXXX,  XXXXXXX,  G_STSH,   G_SHOW,   G_STAT,   XXXXXXX,              XXXXXXX,  XXXXXXX,   XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,                     XXXXXXX,
+XXXXXXX,  XXXXXXX,    _______,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,              XXXXXXX,  XXXXXXX,   XXXXXXX,  XXXXXXX,  XXXXXXX,                      _______, XXXXXXX,  XXXXXXX,
+XXXXXXX,  XXXXXXX,    XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  KC_BSPC,                        XXXXXXX,             XXXXXXX, XXXXXXX,   XXXXXXX,                      XXXXXXX, XXXXXXX,  XXXXXXX
+  ),   
+  
+ /*                ,-----------------------------------------.     ,-----------------------------------------------------.
   *                |     |     |     |     |     |     |     |     |     |     |     |     |     |     |     |     |     |
   * ,-----------.  |-----+-----+-----+-----+-----+-----+-----|     |-----+-----+-----+-----+-----+-----+-----------+-----|
   * |     |     |  |     |     |     |     |     |     |     |     |     |     |     |     |     |     |           |     |
@@ -140,50 +243,25 @@ _______,  TO(WORKMAN),TO(BASE), KC_MS_ACCEL0,KC_MS_ACCEL1,KC_MS_ACCEL2, _______,
   * |-----+-----|  |---------------------------------------.    `--------------------------------------------------+-----|
   * |     |     |  |         |     |     |     |     |     |     |     |     |     |     |     |     |             |     |
   * |-----+-----|  |-----------------------------------------.   `-------------------------------------------------+-----|
-  * |     |     |  |           |     |     | Play|     |     |     |     |     |     |     |       |         |     |     |
+  * |     |     |  |           |    |     |      |     |     |     |     |     |     |     |       |         |     |     |
   * |-----+-----|  |-----------------------------------------'   ,-------------------------------------------+-----+-----|
-  * |     |     |  | BASE  |      |      |           |     |     |               |       |     |       |     |     |     |
+  * |     |     |  |       |      |      |           |     |     |               |       |     |       |     |     |     |
   * `-----------'  `---------------------------------------'     `-------------------------------------------------------'
   */
-  [MEDIA] = LAYOUT(
-//--------------------------------Left Hand-----------------------------------------------| |--------------------------------Right Hand------------------------------------------------
-                      _______,  _______,  _______,  _______,  _______,  _______,  _______,              _______,   _______,  _______,  _______,  _______,  _______,  _______,  _______, _______,
-_______,  _______,    _______,  _______,  _______,  _______,  _______,  _______,  _______,              _______,   _______,  _______,  _______,  _______,  _______,  _______,           _______,
-_______,  _______,    _______,  KC_MPRV,  KC_VOLU,  KC_MNXT,  _______,  _______,              _______,  _______,   _______,  _______,  _______,  _______,  _______,  _______,           _______,
-_______,  _______,    _______,  _______,  KC_VOLD,  _______,  _______,  _______,              _______,  _______,   _______,  _______,  _______,  _______,  _______,                     _______,
-_______,  _______,    _______,  _______,  KC_MUTE,  KC_MPLY,  _______,  _______,              _______,  _______,   _______,  _______,  _______,                      _______, _______,  _______,
-_______,  _______,    _______,  _______,  _______,  _______,  _______,                        _______,             _______, _______,   _______,                      _______, _______,  _______
-  )
+  // [] = LAYOUT(
+// //--------------------------------Left Hand-----------------------------------------------| |--------------------------------Right Hand------------------------------------------------
+                      // _______,  _______,  _______,  _______,  _______,  _______,  _______,              _______,   _______,  _______,  _______,  _______,  _______,  _______,  _______, _______,
+// _______,  _______,    _______,  _______,  _______,  _______,  _______,  _______,  _______,              _______,   _______,  _______,  _______,  _______,  _______,  _______,           _______,
+// _______,  _______,    _______,  _______,  _______,  _______,  _______,  _______,              _______,  _______,   _______,  _______,  _______,  _______,  _______,  _______,           _______,
+// _______,  _______,    _______,  _______,  _______,  _______,  _______,  _______,              _______,  _______,   _______,  _______,  _______,  _______,  _______,                     _______,
+// _______,  _______,    _______,  _______,  _______,  _______,  _______,  _______,              _______,  _______,   _______,  _______,  _______,                      _______, _______,  _______,
+// _______,  _______,    _______,  _______,  _______,  _______,  _______,                        _______,             _______, _______,   _______,                      _______, _______,  _______
+  // ),
 };
 
-bool led_update_user(led_t led_state) {
-    writePin(CAPSLOCK_LED_PIN, led_state.caps_lock);
-    return false;
-}
+bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
 
-void keyboard_pre_init_user(void) {
-    writePinHigh(SCROLLLOCK_LED_PIN);
-    wait_ms(50);
-    writePinHigh(CAPSLOCK_LED_PIN);
-    wait_ms(50);
-    writePinHigh(NUMLOCK_LED_PIN);
-    wait_ms(50);
-    writePinLow(SCROLLLOCK_LED_PIN);
-    wait_ms(50);
-    writePinLow(CAPSLOCK_LED_PIN);
-    wait_ms(50);
-    writePinLow(NUMLOCK_LED_PIN);
-	
-	layer_state_set_user(layer_state);
-}
-
-layer_state_t layer_state_set_user(layer_state_t state) {
-    writePinLow(NUMLOCK_LED_PIN);
-    writePinLow(SCROLLLOCK_LED_PIN);
-    switch (get_highest_layer(state)) {
-    case BASE:
-        writePinHigh(SCROLLLOCK_LED_PIN);
-        break;
-    }
-    return state;
-}
+  }
+  return true;
+}

keyboards/wheatfield/split75/keymaps/art/rules.mk

@@ -0,0 +1 @@
+DYNAMIC_MACRO_ENABLE = yes

keyboards/wheatfield/split75/keymaps/default/keymap.c

@@ -1,6 +1,8 @@
 #include QMK_KEYBOARD_H
 
-#define BASE 0
+enum layer_names {
+  BASE
+};
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 

keyboards/wolfmarkclub/wm1/bootloader_defs.h

@@ -0,0 +1,11 @@
+/* Address for jumping to bootloader on STM32 chips. */
+/* It is chip dependent, the correct number can be looked up here (page 175):
+ * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+ * This also requires a patch to chibios:
+ *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+ */
+
+// STM32F103 does not have a USB bootloader in ROM -- the WM1
+// has a usermode USB mass storage device bootloader at the normal
+// boot address -- `0x08000000`.
+#define STM32_BOOTLOADER_ADDRESS 0x80000000

keyboards/wolfmarkclub/wm1/chconf.h

@@ -0,0 +1,714 @@
+/*
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    rt/templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+#define _CHIBIOS_RT_CONF_VER_6_0_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_ST_RESOLUTION)
+#define CH_CFG_ST_RESOLUTION                32
+#endif
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#if !defined(CH_CFG_ST_FREQUENCY)
+#define CH_CFG_ST_FREQUENCY                 100000
+#endif
+
+/**
+ * @brief   Time intervals data size.
+ * @note    Allowed values are 16, 32 or 64 bits.
+ */
+#if !defined(CH_CFG_INTERVALS_SIZE)
+#define CH_CFG_INTERVALS_SIZE               32
+#endif
+
+/**
+ * @brief   Time types data size.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
+#define CH_CFG_TIME_TYPES_SIZE              32
+#endif
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#if !defined(CH_CFG_ST_TIMEDELTA)
+#define CH_CFG_ST_TIMEDELTA                 0
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#if !defined(CH_CFG_TIME_QUANTUM)
+#define CH_CFG_TIME_QUANTUM                 0
+#endif
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#if !defined(CH_CFG_MEMCORE_SIZE)
+#define CH_CFG_MEMCORE_SIZE                 0
+#endif
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#if !defined(CH_CFG_NO_IDLE_THREAD)
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_TM)
+#define CH_CFG_USE_TM                       FALSE
+#endif
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_REGISTRY)
+#define CH_CFG_USE_REGISTRY                 TRUE
+#endif
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_WAITEXIT)
+#define CH_CFG_USE_WAITEXIT                 TRUE
+#endif
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_SEMAPHORES)
+#define CH_CFG_USE_SEMAPHORES               TRUE
+#endif
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+#endif
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MUTEXES)
+#define CH_CFG_USE_MUTEXES                  TRUE
+#endif
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+#endif
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#if !defined(CH_CFG_USE_CONDVARS)
+#define CH_CFG_USE_CONDVARS                 TRUE
+#endif
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
+#define CH_CFG_USE_CONDVARS_TIMEOUT         FALSE
+#endif
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_EVENTS)
+#define CH_CFG_USE_EVENTS                   TRUE
+#endif
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+#endif
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MESSAGES)
+#define CH_CFG_USE_MESSAGES                 TRUE
+#endif
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+#endif
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#if !defined(CH_CFG_USE_MAILBOXES)
+#define CH_CFG_USE_MAILBOXES                TRUE
+#endif
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MEMCORE)
+#define CH_CFG_USE_MEMCORE                  TRUE
+#endif
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#if !defined(CH_CFG_USE_HEAP)
+#define CH_CFG_USE_HEAP                     TRUE
+#endif
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MEMPOOLS)
+#define CH_CFG_USE_MEMPOOLS                 FALSE
+#endif
+
+/**
+ * @brief   Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
+#define CH_CFG_USE_OBJ_FIFOS                FALSE
+#endif
+
+/**
+ * @brief   Pipes APIs.
+ * @details If enabled then the pipes APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_PIPES)
+#define CH_CFG_USE_PIPES                    FALSE
+#endif
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#if !defined(CH_CFG_USE_DYNAMIC)
+#define CH_CFG_USE_DYNAMIC                  FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ *          kernel.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_CFG_USE_FACTORY)
+#define CH_CFG_USE_FACTORY                  FALSE
+#endif
+
+/**
+ * @brief   Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ *          pointer but this could have unintended side effects.
+ */
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH     8
+#endif
+
+/**
+ * @brief   Enables the registry of generic objects.
+ */
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY     FALSE
+#endif
+
+/**
+ * @brief   Enables factory for generic buffers.
+ */
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+#define CH_CFG_FACTORY_GENERIC_BUFFERS      FALSE
+#endif
+
+/**
+ * @brief   Enables factory for semaphores.
+ */
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
+#define CH_CFG_FACTORY_SEMAPHORES           FALSE
+#endif
+
+/**
+ * @brief   Enables factory for mailboxes.
+ */
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
+#define CH_CFG_FACTORY_MAILBOXES            FALSE
+#endif
+
+/**
+ * @brief   Enables factory for objects FIFOs.
+ */
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+#define CH_CFG_FACTORY_OBJ_FIFOS            FALSE
+#endif
+
+/**
+ * @brief   Enables factory for Pipes.
+ */
+#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__)
+#define CH_CFG_FACTORY_PIPES                FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_STATISTICS)
+#define CH_DBG_STATISTICS                   FALSE
+#endif
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+#endif
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_CHECKS)
+#define CH_DBG_ENABLE_CHECKS                FALSE
+#endif
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_ASSERTS)
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+#endif
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_MASK)
+#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
+#endif
+
+/**
+ * @brief   Trace buffer entries.
+ * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ *          different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
+#define CH_DBG_TRACE_BUFFER_SIZE            128
+#endif
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+#endif
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_FILL_THREADS)
+#define CH_DBG_FILL_THREADS                 FALSE
+#endif
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#if !defined(CH_DBG_THREADS_PROFILING)
+#define CH_DBG_THREADS_PROFILING            FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ *          just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() {                                         \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p _thread_init() function.
+ *
+ * @note    It is invoked from within @p _thread_init() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
+  /* IRQ prologue code here.*/                                              \
+}
+
+/**
+ * @brief   ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
+  /* IRQ epilogue code here.*/                                              \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+  /* Idle-enter code here.*/                                                \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+  /* Idle-leave code here.*/                                                \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/**
+ * @brief   Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ *          trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) {                                            \
+  /* Trace code here.*/                                                     \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* CHCONF_H */
+
+/** @} */

keyboards/wolfmarkclub/wm1/config.h

@@ -0,0 +1,80 @@
+/*
+Copyright 2015 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x2B29
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Wolfmark Club
+#define PRODUCT         WM1
+#define DESCRIPTION     Ergo 65%
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+//                         0    1    2    3    4     5   6   7    8     9   A   B  C   D   E  
+#define MATRIX_ROW_PINS { C4,  A7,  A6,  A5,  A4 }
+#define MATRIX_COL_PINS { B10, B11, B12, B13, B14, B15, C6, C10, C11, C12, D2, B5, B6, B7, B8 }
+
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+// #define BACKLIGHT_PIN A2
+// #ifdef BACKLIGHT_PIN
+// #define BACKLIGHT_LEVELS 5
+// #endif
+
+#define RGB_DI_PIN A3
+#ifdef RGB_DI_PIN
+#define RGBLED_NUM 18
+#define RGBLIGHT_ANIMATIONS
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+#define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+#endif
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE    5
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION

keyboards/wolfmarkclub/wm1/halconf.h

@@ -0,0 +1,525 @@
+/*
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef HALCONF_H
+#define HALCONF_H
+
+#define _CHIBIOS_HAL_CONF_
+#define _CHIBIOS_HAL_CONF_VER_7_0_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                         TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                         FALSE
+#endif
+
+/**
+ * @brief   Enables the cryptographic subsystem.
+ */
+#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__)
+#define HAL_USE_CRY                         FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                         FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                         FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                         FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                         FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI                     FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                         TRUE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL                      FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB                  FALSE
+#endif
+
+/**
+ * @brief   Enables the SIO subsystem.
+ */
+#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__)
+#define HAL_USE_SIO                         FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                         FALSE
+#endif
+
+/**
+ * @brief   Enables the TRNG subsystem.
+ */
+#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__)
+#define HAL_USE_TRNG                        FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                        FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                         TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                         FALSE
+#endif
+
+/**
+ * @brief   Enables the WSPI subsystem.
+ */
+#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__)
+#define HAL_USE_WSPI                        FALSE
+#endif
+
+/*===========================================================================*/
+/* PAL driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__)
+#define PAL_USE_CALLBACKS                   FALSE
+#endif
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__)
+#define PAL_USE_WAIT                        FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                        TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION            TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE                  TRUE
+#endif
+
+/**
+ * @brief   Enforces the driver to use direct callbacks rather than OSAL events.
+ */
+#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__)
+#define CAN_ENFORCE_USE_CALLBACKS           FALSE
+#endif
+
+/*===========================================================================*/
+/* CRY driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the SW fall-back of the cryptographic driver.
+ * @details When enabled, this option, activates a fall-back software
+ *          implementation for algorithms not supported by the underlying
+ *          hardware.
+ * @note    Fall-back implementations may not be present for all algorithms.
+ */
+#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__)
+#define HAL_CRY_USE_FALLBACK                FALSE
+#endif
+
+/**
+ * @brief   Makes the driver forcibly use the fall-back implementations.
+ */
+#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__)
+#define HAL_CRY_ENFORCE_FALLBACK            FALSE
+#endif
+
+/*===========================================================================*/
+/* DAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__)
+#define DAC_USE_WAIT                        TRUE
+#endif
+
+/**
+ * @brief   Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define DAC_USE_MUTUAL_EXCLUSION            TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION            TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the zero-copy API.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY                   FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS                      TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING                    TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY                      100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT                     FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING                    TRUE
+#endif
+
+/**
+ * @brief   OCR initialization constant for V20 cards.
+ */
+#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__)
+#define SDC_INIT_OCR_V20                    0x50FF8000U
+#endif
+
+/**
+ * @brief   OCR initialization constant for non-V20 cards.
+ */
+#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__)
+#define SDC_INIT_OCR                        0x80100000U
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE              38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE                 16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE             1
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER           2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                        TRUE
+#endif
+
+/**
+ * @brief   Enables circular transfers APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__)
+#define SPI_USE_CIRCULAR                    FALSE
+#endif
+
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION            TRUE
+#endif
+
+/**
+ * @brief   Handling method for SPI CS line.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__)
+#define SPI_SELECT_MODE                     SPI_SELECT_MODE_PAD
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT                       FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION           FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                        TRUE
+#endif
+
+/*===========================================================================*/
+/* WSPI driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__)
+#define WSPI_USE_WAIT                       TRUE
+#endif
+
+/**
+ * @brief   Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define WSPI_USE_MUTUAL_EXCLUSION           TRUE
+#endif
+
+#endif /* HALCONF_H */
+
+/** @} */

keyboards/wolfmarkclub/wm1/info.json

@@ -0,0 +1,12 @@
+{
+    "keyboard_name": "Wolfmark Club WM1", 
+    "url": "", 
+    "maintainer": "qmk", 
+    "width": 18.25, 
+    "height": 5.25, 
+    "layouts": {
+        "LAYOUT": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":8.75, "y":0}, {"x":9.75, "y":0}, {"x":10.75, "y":0}, {"x":11.75, "y":0}, {"x":12.75, "y":0}, {"x":13.75, "y":0}, {"x":14.75, "y":0}, {"x":15.75, "y":0}, {"x":17, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":8.25, "y":1}, {"x":9.25, "y":1}, {"x":10.25, "y":1}, {"x":11.25, "y":1}, {"x":12.25, "y":1}, {"x":13.25, "y":1}, {"x":14.25, "y":1}, {"x":15.25, "y":1, "w":1.5}, {"x":17, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":8.5, "y":2}, {"x":9.5, "y":2}, {"x":10.5, "y":2}, {"x":11.5, "y":2}, {"x":12.5, "y":2}, {"x":13.5, "y":2}, {"x":14.5, "y":2, "w":2.25}, {"x":17, "y":2}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}, {"x":12, "y":3}, {"x":13, "y":3}, {"x":14, "y":3, "w":1.75}, {"x":16.25, "y":3.25}, {"x":0, "y":4, "w":1.5}, {"x":3, "y":4, "w":1.5}, {"x":4.5, "y":4, "w":2}, {"x":6.5, "y":4}, {"x":8, "y":4, "w":2.75}, {"x":10.75, "y":4, "w":1.5}, {"x":13.25, "y":4, "w":1.5}, {"x":15.25, "y":4.25}, {"x":16.25, "y":4.25}, {"x":17.25, "y":4.25}]
+        }
+    }
+}

keyboards/wolfmarkclub/wm1/keymaps/default/keymap.c

@@ -0,0 +1,17 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT(
+KC_GESC,   KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS,   KC_EQL,   KC_GRV,  KC_DEL, KC_HOME,
+KC_TAB,    KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC,   KC_RBRC,  KC_BSPC,  KC_END,
+KC_CAPS,   KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT,             KC_ENT,   MO(1),
+KC_LSFT,   KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH,   KC_RSFT,  KC_UP,
+KC_LCTL,           KC_LALT,KC_LGUI,KC_SPC,         KC_SPC,         KC_RALT,         KC_RCTL,   KC_LEFT,  KC_DOWN,  KC_RIGHT),
+
+[1] = LAYOUT(
+KC_GRV,     KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,   KC_F10,   KC_F11,  KC_F12,   _______,  _______, _______,
+RESET,    _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
+_______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,            _______,  _______,
+_______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
+_______,            _______,  _______,            _______,            _______,            _______,            _______,  _______,  _______,  _______),
+};

keyboards/wolfmarkclub/wm1/ld/wm1_f103.ld

@@ -0,0 +1,88 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * STM32F103xC memory setup for use with the WM1 mass-storage device bootloader.
+ * You will have to change:
+ * 	OPT_DEFS = -DCORTEX_VTOR_INIT=0x10000
+ * in your board's rules.mk
+ */
+MEMORY
+{
+    flash0  : org = 0x08010000, len = 256k - 0x10000
+    flash1  : org = 0x00000000, len = 0
+    flash2  : org = 0x00000000, len = 0
+    flash3  : org = 0x00000000, len = 0
+    flash4  : org = 0x00000000, len = 0
+    flash5  : org = 0x00000000, len = 0
+    flash6  : org = 0x00000000, len = 0
+    flash7  : org = 0x00000000, len = 0
+    ram0    : org = 0x20000000, len = 48k
+    ram1    : org = 0x00000000, len = 0
+    ram2    : org = 0x00000000, len = 0
+    ram3    : org = 0x00000000, len = 0
+    ram4    : org = 0x00000000, len = 0
+    ram5    : org = 0x00000000, len = 0
+    ram6    : org = 0x00000000, len = 0
+    ram7    : org = 0x00000000, len = 0
+}
+
+/* For each data/text section two region are defined, a virtual region
+   and a load region (_LMA suffix).*/
+
+/* Flash region to be used for exception vectors.*/
+REGION_ALIAS("VECTORS_FLASH", flash0);
+REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for constructors and destructors.*/
+REGION_ALIAS("XTORS_FLASH", flash0);
+REGION_ALIAS("XTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for code text.*/
+REGION_ALIAS("TEXT_FLASH", flash0);
+REGION_ALIAS("TEXT_FLASH_LMA", flash0);
+
+/* Flash region to be used for read only data.*/
+REGION_ALIAS("RODATA_FLASH", flash0);
+REGION_ALIAS("RODATA_FLASH_LMA", flash0);
+
+/* Flash region to be used for various.*/
+REGION_ALIAS("VARIOUS_FLASH", flash0);
+REGION_ALIAS("VARIOUS_FLASH_LMA", flash0);
+
+/* Flash region to be used for RAM(n) initialization data.*/
+REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0);
+
+/* RAM region to be used for Main stack. This stack accommodates the processing
+   of all exceptions and interrupts.*/
+REGION_ALIAS("MAIN_STACK_RAM", ram0);
+
+/* RAM region to be used for the process stack. This is the stack used by
+   the main() function.*/
+REGION_ALIAS("PROCESS_STACK_RAM", ram0);
+
+/* RAM region to be used for data segment.*/
+REGION_ALIAS("DATA_RAM", ram0);
+REGION_ALIAS("DATA_RAM_LMA", flash0);
+
+/* RAM region to be used for BSS segment.*/
+REGION_ALIAS("BSS_RAM", ram0);
+
+/* RAM region to be used for the default heap.*/
+REGION_ALIAS("HEAP_RAM", ram0);
+
+/* Generic rules inclusion.*/
+INCLUDE rules.ld

keyboards/wolfmarkclub/wm1/mcuconf.h

@@ -0,0 +1,209 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define STM32F103_MCUCONF
+
+/*
+ * STM32F103 drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   FALSE
+#define STM32_HSE_ENABLED                   TRUE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSE
+#define STM32_PLLXTPRE                      STM32_PLLXTPRE_DIV1
+#define STM32_PLLMUL_VALUE                  9
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV2
+#define STM32_PPRE2                         STM32_PPRE2_DIV2
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_USB_CLOCK_REQUIRED            TRUE
+#define STM32_USBPRE                        STM32_USBPRE_DIV1P5
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_RTCSEL                        STM32_RTCSEL_HSEDIV
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC1_IRQ_PRIORITY         6
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         11
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM5                  FALSE
+#define STM32_GPT_USE_TIM8                  FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM5_IRQ_PRIORITY         7
+#define STM32_GPT_TIM8_IRQ_PRIORITY         7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         5
+#define STM32_I2C_I2C2_IRQ_PRIORITY         5
+#define STM32_I2C_I2C1_DMA_PRIORITY         3
+#define STM32_I2C_I2C2_DMA_PRIORITY         3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM5                  FALSE
+#define STM32_ICU_USE_TIM8                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM5_IRQ_PRIORITY         7
+#define STM32_ICU_TIM8_IRQ_PRIORITY         7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  TRUE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM5                  FALSE
+#define STM32_PWM_USE_TIM8                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM5_IRQ_PRIORITY         7
+#define STM32_PWM_TIM8_IRQ_PRIORITY         7
+
+/*
+ * RTC driver system settings.
+ */
+#define STM32_RTC_IRQ_PRIORITY              15
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USE_UART4              FALSE
+#define STM32_SERIAL_USE_UART5              FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+#define STM32_SERIAL_UART4_PRIORITY         12
+#define STM32_SERIAL_UART5_PRIORITY         12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_HP_IRQ_PRIORITY      13
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      14
+
+#endif /* _MCUCONF_H_ */

keyboards/wolfmarkclub/wm1/readme.md

@@ -0,0 +1,17 @@
+# Wolfmark Club WM1
+
+![WM1](https://i.imgur.com/TDFp97yl.jpg)
+
+Split Ergo 65% keyboard
+
+* Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)
+* Hardware Supported: WM1
+* Hardware Availability: Available through China run Group Buy.
+
+Make example for this keyboard (after setting up your build environment):
+
+    make wolfmarkclub/wm1:default
+
+**Reset Key**: Hold the `Esc` key while plugging in your cable, and the board will appear as a USB drive on your computer. 
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/wolfmarkclub/wm1/rules.mk

@@ -0,0 +1,33 @@
+# MCU name
+MCU = STM32F103
+
+# GENERIC STM32F103C8T6 board - mass storage bootloader
+OPT_DEFS = -DCORTEX_VTOR_INIT=0x10000
+MCU_LDSCRIPT = wm1_f103
+BOARD = STM32_F103_STM32DUINO
+
+PROGRAM_CMD=echo 'CLI flashing not supported' >&2
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = yes      # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+LTO_ENABLE = yes
+
+# Enter lower-power sleep mode when on the ChibiOS idle thread
+OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE

keyboards/wolfmarkclub/wm1/wm1.c

@@ -0,0 +1,17 @@
+#include "wm1.h"
+
+void matrix_init_kb(void) {
+  setPinOutput(B1); // Top Indicator LED
+  setPinOutput(B0); // Middle Indicator LED
+  setPinOutput(C5); // Bottom Indicator LED
+  matrix_init_user();
+}
+
+bool led_update_kb(led_t led_state) {
+    if(led_update_user(led_state)) {
+        writePin(B1, led_state.caps_lock);
+        writePin(B0, led_state.num_lock);
+        writePin(C5, led_state.scroll_lock);
+    }
+    return true;
+}

keyboards/wolfmarkclub/wm1/wm1.h

@@ -0,0 +1,34 @@
+/* Copyright 2019
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+	K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K2D,  \
+	K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E,       \
+	K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2E,            \
+	K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3E,            \
+	K40,      K42, K43, K45,      K47,           K49,      K4B, K4C, K4D, K4E        \
+)\
+{\
+	{K00, K01,   K02,   K03, K04, K05, 	K06,	K07,	K08,	K09, K0A,   K0B, K0C,   K0D,	K0E},           \
+	{K10, K11,   K12,   K13, K14, K15, 	K16,	K17,	K18,	K19, K1A,   K1B, K1C,   K1D,	K1E},           \
+	{K20, K21,   K22,   K23, K24, K25, 	K26,	K27,	K28,	K29, K2A,   K2B, K2C,	  K2D,  K2E},           \
+	{K30, K31,   K32,   K33, K34, K35, 	K36,	K37,	K38,	K39, K3A,   K3B, K3C,   KC_NO,	K3E},         \
+	{K40, KC_NO, K42, 	K43, KC_NO, K45,  KC_NO, 	K47,	KC_NO,	K49, KC_NO,   K4B, K4C,   K4D,	K4E }   \
+}

keyboards/xd60/keymaps/melka/.gitignore

@@ -0,0 +1 @@
+passwd.h

keyboards/xd60/keymaps/melka/config.h

@@ -0,0 +1,20 @@
+#pragma once
+
+#if __GNUC__ > 5
+#    if __has_include("passwd.h")
+#        include "passwd.h"
+#    endif  // if file exists
+#endif      // __GNUC__
+
+#ifndef PASSWORD_A
+    #define PASSWORD_A "1234567890"
+#endif
+
+#ifndef PASSWORD_B
+    #define PASSWORD_B "pass123"
+#endif
+
+#define RGBLIGHT_LAYERS
+
+#define LSPO_KEYS KC_LSFT, KC_TRNS, KC_5
+#define RSPC_KEYS KC_RSFT, KC_TRNS, KC_MINS

keyboards/xd60/keymaps/melka/keymap.c

@@ -0,0 +1,165 @@
+#include QMK_KEYBOARD_H
+
+/*
+Security Note: While it is possible to use macros to send passwords, credit card numbers,
+and other sensitive information it is a supremely bad idea to do so. Anyone who gets a hold
+of your keyboard will be able to access that information by opening a text editor.
+*/
+enum custom_keycodes
+{
+  PASS_A = SAFE_RANGE,
+  PASS_B
+};
+
+#define ___ KC_NO
+
+#define LAYOUT_melka(                                                           \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E,  \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,       \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,            \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E,  \
+    K40, K41, K42, K43, K44, K45, K46, K47, K48)                                \
+  {                                                                             \
+    {K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D},     \
+    {K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, ___},     \
+    {K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K1D},     \
+    {K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3E, K3D},     \
+    {K40, K41, K42, ___, ___, K43, ___, K3C, K46, K0E, K44, K45, K47, K48}      \
+  }
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    // 0: Base Layer
+    LAYOUT_melka(
+      KC_NUBS,  KC_1,       KC_2,       KC_3,       KC_4,       KC_5,       KC_6,       KC_7,       KC_8,       KC_9,       KC_0,       KC_MINS,    KC_EQL,     KC_DEL,     KC_BSPC,
+      KC_TAB,   KC_Q,       KC_W,       KC_E,       KC_R,       KC_T,       KC_Y,       KC_U,       KC_I,       KC_O,       KC_P,       KC_LBRC,    KC_RBRC,    KC_ENT,
+      KC_CAPS,  KC_A,       KC_S,       KC_D,       KC_F,       KC_G,       KC_H,       KC_J,       KC_K,       KC_L,       KC_SCLN,    KC_QUOT,    KC_BSLS,
+      MT(KC_LSFT, KC_5),  KC_GRV,     KC_Z,       KC_X,       KC_C,       KC_V,       KC_B,       KC_N,       KC_M,       KC_COMM,    KC_DOT,     KC_SLSH,    MT(KC_RSFT, KC_MINS),    KC_UP,      MO(1),
+      KC_LCTL,  KC_LALT,    KC_LGUI,                                        KC_SPC,                                         KC_RGUI,    KC_RALT,    KC_LEFT,  KC_DOWN,      KC_RIGHT),
+
+  // 1: Function Layer
+  LAYOUT_melka(
+      KC_ESC,   KC_F1,      KC_F2,      KC_F3,      KC_F4,      KC_F5,      KC_F6,      KC_F7,      KC_F8,      KC_F9,      KC_F10,     KC_F11,     KC_F12,     _______,    _______,
+      _______,  KC_WH_U,    KC_UP,      KC_WH_D,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,
+      _______,  KC_LEFT,    KC_DOWN,    KC_RIGHT,   _______,    _______,    _______,    _______,    _______,    _______,    KC_HOME,    KC_PGUP,    _______,
+      TO(2),    TO(3),      _______,    KC_APP,     BL_STEP,    _______,    _______,    _______,    _______,    _______,    _______,    KC_END,     KC_PGDN,    KC_VOLU,    _______,
+      _______,  _______,    _______,                                        _______,                                        _______,    _______,    _______,    KC_VOLD,    KC_MUTE),
+
+  // 2: RGB Layer
+  LAYOUT_melka(
+      RGB_TOG,  RGB_M_P,    RGB_RMOD,   RGB_MOD,    RGB_M_B,    RGB_M_R,    RGB_M_SW,   RGB_M_SN,   RGB_M_K,    RGB_M_X,    RGB_M_G,    RGB_M_T,    _______,    _______,    RESET,
+      _______,  RGB_HUD,    RGB_HUI,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,
+      _______,  RGB_SAD,    RGB_SAI,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,
+      TO(0),    _______,    RGB_VAD,    RGB_VAI,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    PASS_A,      PASS_B,    _______,    _______,
+      _______,  _______,    _______,                                        _______,                                        _______,    _______,    _______,    _______,    _______),
+
+  // 3: Keypad Layer
+  LAYOUT_melka(
+      KC_ESC,   _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    KC_NLCK,    KC_PEQL,    KC_PSLS,    KC_PAST,    _______,    _______,
+      _______,  _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    KC_P7,      KC_P8,      KC_P9,      KC_PMNS,    _______,
+      _______,  _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    KC_P4,      KC_P5,      KC_P6,      KC_PPLS,
+      TO(0),    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    KC_P1,      KC_P2,      KC_P3,      KC_PENT,    TO(0),
+      _______,  _______,    _______,                                        _______,                                        KC_P0,      KC_P0,      KC_PDOT,    KC_PENT,    _______)
+};
+
+// Light LEDs 6 to 9 and 12 to 15 red when caps lock is active. Hard to ignore!
+const rgblight_segment_t PROGMEM rgb_capslock_layer[] = RGBLIGHT_LAYER_SEGMENTS(
+    {2, 4, HSV_RED},       // Light 4 LEDs, starting with LED 6
+    {6, 4, HSV_RED}       // Light 4 LEDs, starting with LED 12
+);
+// Light LEDs 9 & 10 in cyan when keyboard layer 1 is active
+const rgblight_segment_t PROGMEM rgb_function_layer[] = RGBLIGHT_LAYER_SEGMENTS(
+    {9, 2, HSV_CYAN}
+);
+// Light LEDs 11 & 12 in purple when keyboard layer 2 is active
+const rgblight_segment_t PROGMEM rgb_backlight_layer[] = RGBLIGHT_LAYER_SEGMENTS(
+    {10, 2, HSV_PURPLE}
+);
+const rgblight_segment_t PROGMEM rgb_keypad_layer[] = RGBLIGHT_LAYER_SEGMENTS(
+    {4, 4, HSV_RED}
+);
+// Now define the array of layers. Later layers take precedence
+const rgblight_segment_t* const PROGMEM rgb_layers[] = RGBLIGHT_LAYERS_LIST(
+    rgb_capslock_layer,
+    rgb_function_layer,
+    rgb_backlight_layer,    // Overrides caps lock layer
+    rgb_keypad_layer     // Overrides other layers
+);
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+    // Both layers will light up if both kb layers are active
+    rgblight_set_layer_state(1, layer_state_cmp(state, 1));
+    rgblight_set_layer_state(2, layer_state_cmp(state, 2));
+    return state;
+}
+
+bool led_update_user(led_t led_state) {
+    rgblight_set_layer_state(0, led_state.caps_lock);
+    return true;
+}
+
+void keyboard_post_init_user(void) {
+    // Enable the LED layers
+    rgblight_layers = rgb_layers;
+}
+// Loop
+void matrix_scan_user(void) {
+  // Empty
+};
+
+static bool control_disabled = false;
+static bool delete_pressed = false;
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record)
+{
+  if (keycode == KC_BSPC)
+  {
+    if (record->event.pressed)
+    {
+      if (keyboard_report->mods & MOD_BIT(KC_LCTL))
+      {
+        delete_pressed = true;
+        control_disabled = true;
+        unregister_code(KC_LCTL);
+        register_code(KC_DEL);
+        return false;
+      }
+    }
+    else if (delete_pressed)
+    {
+      delete_pressed = false;
+      unregister_code(KC_DEL);
+
+      if (control_disabled)
+      {
+        control_disabled = false;
+        register_code(KC_LCTL);
+      }
+      return false;
+    }
+  }
+  else if (keycode == KC_LCTL && !record->event.pressed && delete_pressed)
+  {
+    delete_pressed = false;
+    control_disabled = false;
+    unregister_code(KC_DEL);
+    register_code(KC_BSPC);
+    return false;
+  }
+
+  switch (keycode)
+  {
+  case PASS_A:
+    if (record->event.pressed)
+    {
+      SEND_STRING(PASSWORD_A "\n");
+    }
+    break;
+  case PASS_B:
+    if (record->event.pressed)
+    {
+      SEND_STRING(PASSWORD_B "\n");
+    }
+    break;
+  }
+  return true;
+}

keyboards/xd60/keymaps/melka/passwd_template.h

@@ -0,0 +1,10 @@
+/*
+To define your password, rename this file to passwd.h and edit the defines below.
+
+Security Note: While it is possible to use macros to send passwords, credit card numbers,
+and other sensitive information it is a supremely bad idea to do so. Anyone who gets a hold
+of your keyboard will be able to access that information by opening a text editor.
+*/
+
+#define PASSWORD_A "enter your first password here"
+#define PASSWORD_B "second password if you need"

keyboards/xd60/keymaps/melka/readme.md

@@ -0,0 +1,21 @@
+# melka's keymap for XIUDI's 60% XD60 rev3 PCB
+
+## Additional Notes
+Custom Keymap for XD60 rev3. French Mac layout.
+
+## Security Note
+This keymap includes macros for entering passwords.
+
+While it is possible to use macros to send passwords, credit card numbers,
+and other sensitive information it is a supremely bad idea to do so. Anyone who gets a hold
+of your keyboard will be able to access that information by opening a text editor.
+
+Use this functionnality at your own risk.
+
+To define your password, rename passwd_template.h file to passwd.h and edit the defines inside.
+
+## Build
+
+To build this keymap, simply run:
+
+    make xd60/rev3:melka  # XD60 rev3

keyboards/ymdk/bface/README.md

@@ -5,8 +5,9 @@
 A 60% keyboard that runs ps2avrgb natively and fits the popular GH60 form factor. Another "bfake" or clone of the original B.face PCB by [Winkeyless](https://winkeyless.kr/product/b-face-x2-pcb/). This PCB has slightly different switch matrix than the origninal B.face, and is also different than the bfake. It commonly comes as the PCB in 60% keyboard kits sold by YMDK on Aliexpress.
 
 * Keyboard Maintainer: QMK Community
-* Hardware Supported: White Bface Mini USB PCB with no RGB.
+* Hardware Supported: White Bface Mini USB PCB with 12 RGB LEDs on the bottom.
 * Hardware Availability: [Shenzhen YMD Tech Co. (YMDK) on Aliexpress](https://www.aliexpress.com/item/32799437588.html)
+* Case capability: You can not use generic GH60 plastic cases with this board as RGB LEDs on the bottom is messing with the supportive ribs of the case, just like on DZ60.
 
 Make example for this keyboard (after setting up your build environment):
 

keyboards/ymdk/bface/config.h

@@ -36,3 +36,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define BACKLIGHT_PIN       D4
 #define BACKLIGHT_LEVELS    6
+
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 12
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8

keyboards/ymdk/bface/keymaps/minila/keymap.c

@@ -0,0 +1,42 @@
+/*
+Copyright 2019 Ethan Durrant (emdarcher)
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+enum layer_names {
+  _BL,
+  _FL
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    //Base Layer
+    [_BL] = LAYOUT_all(
+		KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, 
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, 
+		LT(_FL, KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, MT(MOD_RCTL, KC_ENT), 
+		KC_LSPO, KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, KC_UP, KC_DEL, 
+		KC_LCTL, KC_LGUI, KC_LALT, MO(_FL), KC_SPC, MO(_FL), KC_RALT, KC_APP, KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+    //FN Layer
+    [_FL] = LAYOUT_all(
+		KC_TILD, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, RESET, 
+		_______, _______, KC_HOME, KC_UP, KC_END, KC_PGUP, _______, NK_TOGG, KC_PSCR, KC_SLCK, KC_PAUS, _______, BL_STEP, BL_TOGG, 
+		_______, _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, _______, KC_INS, KC_HOME, KC_PGUP, KC_BSPC, _______, _______, _______, 
+		_______, _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_VAD, RGB_VAI, _______, KC_DEL, KC_END, KC_PGDN, _______, _______, _______, _______, 
+		_______, _______, _______, _______, KC_ENT, _______, _______, _______, _______, _______, _______
+    ),
+};

keyboards/ymdk/bface/keymaps/minila/readme.md

@@ -0,0 +1,11 @@
+Basically layout like on Filco Minila board, found here: https://geekboards.ru/product/filco-minila
+
+There is one single function layer that can be accessed by holding either FN key or Caps Lock. Enter is also a Right Control when held down. Shifts are also '(' and ')' respectively when tapped.
+
+You can control underglow RGBs:
+
+* FN+Z - Toggle
+* FN+X - Effect
+* FN+C - Color
+* FN+V - Brightness lower
+* FN+B - Brightness higher

keyboards/ymdk/bface/rules.mk

@@ -18,4 +18,5 @@ EXTRAKEY_ENABLE = yes
 CONSOLE_ENABLE = no
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = yes
-RGBLIGHT_ENABLE = no
+RGBLIGHT_ENABLE = yes
+WS2812_DRIVER = i2c

keyboards/ymdk/ymd09/config.h

@@ -20,8 +20,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x0909
+#define VENDOR_ID 0x594D // "YM"
+#define PRODUCT_ID 0x4409 // "D" + 09
 #define DEVICE_VER 0x0001
 #define MANUFACTURER YMDK
 #define PRODUCT YMD09

keyboards/ymdk/ymd09/keymaps/via/keymap.c

@@ -0,0 +1,20 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [0] = LAYOUT(KC_KP_7, KC_KP_8, KC_KP_9,
+               KC_KP_4, LT(1, KC_KP_5), KC_KP_6,
+               KC_KP_1, KC_KP_2, KC_KP_3),
+
+  [1] = LAYOUT(RGB_RMOD, RGB_VAI, RGB_MOD,
+               RGB_HUI, RESET, RGB_SAI,
+               RGB_HUD, RGB_VAD, RGB_SAD),
+
+  [2] = LAYOUT(KC_TRNS, KC_TRNS, KC_TRNS,
+               KC_TRNS, KC_TRNS, KC_TRNS,
+               KC_TRNS, KC_TRNS, KC_TRNS),
+
+  [3] = LAYOUT(KC_TRNS, KC_TRNS, KC_TRNS,
+               KC_TRNS, KC_TRNS, KC_TRNS,
+               KC_TRNS, KC_TRNS, KC_TRNS),
+};

keyboards/ymdk/ymd09/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/ymdk/ymd09/rules.mk

@@ -30,3 +30,4 @@ BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
+LTO_ENABLE = yes            # reduce firmware size

keyboards/zvecr/split_blackpill/chconf.h

@@ -0,0 +1,714 @@
+/*
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    rt/templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+#define _CHIBIOS_RT_CONF_VER_6_0_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_ST_RESOLUTION)
+#define CH_CFG_ST_RESOLUTION                32
+#endif
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#if !defined(CH_CFG_ST_FREQUENCY)
+#define CH_CFG_ST_FREQUENCY                 100000
+#endif
+
+/**
+ * @brief   Time intervals data size.
+ * @note    Allowed values are 16, 32 or 64 bits.
+ */
+#if !defined(CH_CFG_INTERVALS_SIZE)
+#define CH_CFG_INTERVALS_SIZE               32
+#endif
+
+/**
+ * @brief   Time types data size.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
+#define CH_CFG_TIME_TYPES_SIZE              32
+#endif
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#if !defined(CH_CFG_ST_TIMEDELTA)
+#define CH_CFG_ST_TIMEDELTA                 0
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#if !defined(CH_CFG_TIME_QUANTUM)
+#define CH_CFG_TIME_QUANTUM                 0
+#endif
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#if !defined(CH_CFG_MEMCORE_SIZE)
+#define CH_CFG_MEMCORE_SIZE                 0
+#endif
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#if !defined(CH_CFG_NO_IDLE_THREAD)
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_TM)
+#define CH_CFG_USE_TM                       FALSE
+#endif
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_REGISTRY)
+#define CH_CFG_USE_REGISTRY                 TRUE
+#endif
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_WAITEXIT)
+#define CH_CFG_USE_WAITEXIT                 TRUE
+#endif
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_SEMAPHORES)
+#define CH_CFG_USE_SEMAPHORES               TRUE
+#endif
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+#endif
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MUTEXES)
+#define CH_CFG_USE_MUTEXES                  TRUE
+#endif
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+#endif
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#if !defined(CH_CFG_USE_CONDVARS)
+#define CH_CFG_USE_CONDVARS                 TRUE
+#endif
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
+#define CH_CFG_USE_CONDVARS_TIMEOUT         FALSE
+#endif
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_EVENTS)
+#define CH_CFG_USE_EVENTS                   TRUE
+#endif
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+#endif
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MESSAGES)
+#define CH_CFG_USE_MESSAGES                 TRUE
+#endif
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+#endif
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#if !defined(CH_CFG_USE_MAILBOXES)
+#define CH_CFG_USE_MAILBOXES                TRUE
+#endif
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MEMCORE)
+#define CH_CFG_USE_MEMCORE                  TRUE
+#endif
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#if !defined(CH_CFG_USE_HEAP)
+#define CH_CFG_USE_HEAP                     TRUE
+#endif
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MEMPOOLS)
+#define CH_CFG_USE_MEMPOOLS                 FALSE
+#endif
+
+/**
+ * @brief   Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
+#define CH_CFG_USE_OBJ_FIFOS                FALSE
+#endif
+
+/**
+ * @brief   Pipes APIs.
+ * @details If enabled then the pipes APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_PIPES)
+#define CH_CFG_USE_PIPES                    FALSE
+#endif
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#if !defined(CH_CFG_USE_DYNAMIC)
+#define CH_CFG_USE_DYNAMIC                  FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ *          kernel.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_CFG_USE_FACTORY)
+#define CH_CFG_USE_FACTORY                  FALSE
+#endif
+
+/**
+ * @brief   Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ *          pointer but this could have unintended side effects.
+ */
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH     8
+#endif
+
+/**
+ * @brief   Enables the registry of generic objects.
+ */
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY     FALSE
+#endif
+
+/**
+ * @brief   Enables factory for generic buffers.
+ */
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+#define CH_CFG_FACTORY_GENERIC_BUFFERS      FALSE
+#endif
+
+/**
+ * @brief   Enables factory for semaphores.
+ */
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
+#define CH_CFG_FACTORY_SEMAPHORES           FALSE
+#endif
+
+/**
+ * @brief   Enables factory for mailboxes.
+ */
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
+#define CH_CFG_FACTORY_MAILBOXES            FALSE
+#endif
+
+/**
+ * @brief   Enables factory for objects FIFOs.
+ */
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+#define CH_CFG_FACTORY_OBJ_FIFOS            FALSE
+#endif
+
+/**
+ * @brief   Enables factory for Pipes.
+ */
+#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__)
+#define CH_CFG_FACTORY_PIPES                FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_STATISTICS)
+#define CH_DBG_STATISTICS                   FALSE
+#endif
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+#endif
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_CHECKS)
+#define CH_DBG_ENABLE_CHECKS                FALSE
+#endif
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_ASSERTS)
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+#endif
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_MASK)
+#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
+#endif
+
+/**
+ * @brief   Trace buffer entries.
+ * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ *          different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
+#define CH_DBG_TRACE_BUFFER_SIZE            128
+#endif
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+#endif
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_FILL_THREADS)
+#define CH_DBG_FILL_THREADS                 FALSE
+#endif
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#if !defined(CH_DBG_THREADS_PROFILING)
+#define CH_DBG_THREADS_PROFILING            FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ *          just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() {                                         \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p _thread_init() function.
+ *
+ * @note    It is invoked from within @p _thread_init() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
+  /* IRQ prologue code here.*/                                              \
+}
+
+/**
+ * @brief   ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
+  /* IRQ epilogue code here.*/                                              \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+  /* Idle-enter code here.*/                                                \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+  /* Idle-leave code here.*/                                                \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/**
+ * @brief   Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ *          trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) {                                            \
+  /* Trace code here.*/                                                     \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* CHCONF_H */
+
+/** @} */

keyboards/zvecr/split_blackpill/config.h

@@ -0,0 +1,180 @@
+/* Copyright 2020 zvecr <git@zvecr.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x5A56
+#define PRODUCT_ID      0x0001
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    zvecr
+#define PRODUCT         split_blackpill
+#define DESCRIPTION     ARM Split ortho_4x12
+
+/* key matrix size */
+#define MATRIX_ROWS 8 // Rows are doubled-up
+#define MATRIX_COLS 6
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_COL_PINS { B11, B10, B1, B0, A7, A6 }
+#define MATRIX_ROW_PINS { B15, B14, B13, B12 }
+#define MATRIX_COL_PINS_RIGHT { B12, B13, B14, B15, A8, A9 }
+#define MATRIX_ROW_PINS_RIGHT { B0, B1, B10, B11 }
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+#define MATRIX_IO_DELAY 5
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SPLIT_HAND_PIN B3
+#define SOFT_SERIAL_PIN B6
+#define SELECT_SOFT_SERIAL_SPEED 0
+
+#define RGB_DI_PIN B4
+#define RGBLED_NUM 24
+#define RGBLED_SPLIT { 12, 12 }
+#define RGBLIGHT_ANIMATIONS
+
+#define WS2812_PWM_DRIVER PWMD3
+#define WS2812_PWM_CHANNEL 1
+#define WS2812_DMA_STREAM STM32_DMA1_STREAM3
+#define WS2812_DMA_CHANNEL 3
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+#define BOOTMAGIC_LITE_ROW 0
+#define BOOTMAGIC_LITE_COLUMN 0
+#define BOOTMAGIC_LITE_ROW_RIGHT 4
+#define BOOTMAGIC_LITE_COLUMN_RIGHT 0

keyboards/zvecr/split_blackpill/halconf.h

@@ -0,0 +1,525 @@
+/*
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef HALCONF_H
+#define HALCONF_H
+
+#define _CHIBIOS_HAL_CONF_
+#define _CHIBIOS_HAL_CONF_VER_7_0_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                         TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                         FALSE
+#endif
+
+/**
+ * @brief   Enables the cryptographic subsystem.
+ */
+#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__)
+#define HAL_USE_CRY                         FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                         FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                         FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                         FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                         FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI                     FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                         TRUE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL                      TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB                  FALSE
+#endif
+
+/**
+ * @brief   Enables the SIO subsystem.
+ */
+#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__)
+#define HAL_USE_SIO                         FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                         FALSE
+#endif
+
+/**
+ * @brief   Enables the TRNG subsystem.
+ */
+#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__)
+#define HAL_USE_TRNG                        FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                        FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                         TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                         FALSE
+#endif
+
+/**
+ * @brief   Enables the WSPI subsystem.
+ */
+#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__)
+#define HAL_USE_WSPI                        FALSE
+#endif
+
+/*===========================================================================*/
+/* PAL driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__)
+#define PAL_USE_CALLBACKS                   FALSE
+#endif
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__)
+#define PAL_USE_WAIT                        FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                        TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION            TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE                  TRUE
+#endif
+
+/**
+ * @brief   Enforces the driver to use direct callbacks rather than OSAL events.
+ */
+#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__)
+#define CAN_ENFORCE_USE_CALLBACKS           FALSE
+#endif
+
+/*===========================================================================*/
+/* CRY driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the SW fall-back of the cryptographic driver.
+ * @details When enabled, this option, activates a fall-back software
+ *          implementation for algorithms not supported by the underlying
+ *          hardware.
+ * @note    Fall-back implementations may not be present for all algorithms.
+ */
+#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__)
+#define HAL_CRY_USE_FALLBACK                FALSE
+#endif
+
+/**
+ * @brief   Makes the driver forcibly use the fall-back implementations.
+ */
+#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__)
+#define HAL_CRY_ENFORCE_FALLBACK            FALSE
+#endif
+
+/*===========================================================================*/
+/* DAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__)
+#define DAC_USE_WAIT                        TRUE
+#endif
+
+/**
+ * @brief   Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define DAC_USE_MUTUAL_EXCLUSION            TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION            TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the zero-copy API.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY                   FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS                      TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING                    TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY                      100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT                     FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING                    TRUE
+#endif
+
+/**
+ * @brief   OCR initialization constant for V20 cards.
+ */
+#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__)
+#define SDC_INIT_OCR_V20                    0x50FF8000U
+#endif
+
+/**
+ * @brief   OCR initialization constant for non-V20 cards.
+ */
+#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__)
+#define SDC_INIT_OCR                        0x80100000U
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE              38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE                 16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE             1
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER           2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                        TRUE
+#endif
+
+/**
+ * @brief   Enables circular transfers APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__)
+#define SPI_USE_CIRCULAR                    FALSE
+#endif
+
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION            TRUE
+#endif
+
+/**
+ * @brief   Handling method for SPI CS line.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__)
+#define SPI_SELECT_MODE                     SPI_SELECT_MODE_PAD
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT                       FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION           FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                        TRUE
+#endif
+
+/*===========================================================================*/
+/* WSPI driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__)
+#define WSPI_USE_WAIT                       TRUE
+#endif
+
+/**
+ * @brief   Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define WSPI_USE_MUTUAL_EXCLUSION           TRUE
+#endif
+
+#endif /* HALCONF_H */
+
+/** @} */

keyboards/zvecr/split_blackpill/info.json

@@ -0,0 +1,13 @@
+{
+    "keyboard_name": "split_blackpill",
+    "url": "",
+    "maintainer": "zvecr",
+    "width": 12,
+    "height": 4,
+    "layouts": {
+        "LAYOUT_ortho_4x12": {
+            "key_count": 48,
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}]
+        }
+    }
+}