[Bug] Fix IS31fl3741 driver to accept 1 or 2 addresses (#14451)

Co-authored-by: Joel Challis <git@zvecr.com>

bootloader.mk

@@ -21,19 +21,19 @@
 # Current options:
 #
 # AVR:
-#     halfkay     PJRC Teensy
-#     caterina    Pro Micro (Sparkfun/generic)
-#     atmel-dfu   Atmel factory DFU
-#     lufa-dfu    LUFA DFU
-#     qmk-dfu     QMK DFU (LUFA + blinkenlight)
-#     qmk-hid     QMK HID (LUFA + blinkenlight)
-#     bootloadHID HIDBootFlash compatible (ATmega32A)
-#     USBasp      USBaspLoader (ATmega328P)
+#     halfkay      PJRC Teensy
+#     caterina     Pro Micro (Sparkfun/generic)
+#     atmel-dfu    Atmel factory DFU
+#     lufa-dfu     LUFA DFU
+#     qmk-dfu      QMK DFU (LUFA + blinkenlight)
+#     qmk-hid      QMK HID (LUFA + blinkenlight)
+#     bootloadhid  HIDBootFlash compatible (ATmega32A)
+#     usbasploader USBaspLoader (ATmega328P)
 # ARM:
-#     kiibohd     Input:Club Kiibohd bootloader (only used on their boards)
-#     stm32duino  STM32Duino (STM32F103x8)
-#     stm32-dfu   STM32 USB DFU in ROM
-#     apm32-dfu   APM32 USB DFU in ROM
+#     kiibohd      Input:Club Kiibohd bootloader (only used on their boards)
+#     stm32duino   STM32Duino (STM32F103x8)
+#     stm32-dfu    STM32 USB DFU in ROM
+#     apm32-dfu    APM32 USB DFU in ROM
 #
 # BOOTLOADER_SIZE can still be defined manually, but it's recommended
 # you add any possible configuration to this list
@@ -86,11 +86,11 @@ ifeq ($(strip $(BOOTLOADER)), caterina)
     OPT_DEFS += -DBOOTLOADER_CATERINA
     BOOTLOADER_SIZE = 4096
 endif
-ifeq ($(strip $(BOOTLOADER)), bootloadHID)
+ifneq (,$(filter $(BOOTLOADER), bootloadhid bootloadHID))
     OPT_DEFS += -DBOOTLOADER_BOOTLOADHID
     BOOTLOADER_SIZE = 4096
 endif
-ifeq ($(strip $(BOOTLOADER)), USBasp)
+ifneq (,$(filter $(BOOTLOADER), usbasploader USBasp))
     OPT_DEFS += -DBOOTLOADER_USBASP
     BOOTLOADER_SIZE = 4096
 endif

data/schemas/keyboard.jsonschema

@@ -56,7 +56,7 @@
         },
         "bootloader": {
             "type": "string",
-            "enum": ["atmel-dfu", "bootloadHID", "caterina", "halfkay", "kiibohd", "lufa-dfu", "lufa-ms", "micronucleus", "qmk-dfu", "qmk-hid", "stm32-dfu", "stm32duino", "unknown", "USBasp", "tinyuf2"],
+            "enum": ["atmel-dfu", "bootloadhid", "bootloadHID", "caterina", "halfkay", "kiibohd", "lufa-dfu", "lufa-ms", "micronucleus", "qmk-dfu", "qmk-hid", "stm32-dfu", "stm32duino", "unknown", "usbasploader", "USBasp", "tinyuf2"],
         },
         "bootloader_instructions": {
             "type": "string",
@@ -118,7 +118,6 @@
                     "c_macro": {
                         "type": "boolean"
                     },
-                    "key_count": {"$ref": "qmk.definitions.v1#/key_unit"},
                     "layout": {
                         "type": "array",
                         "items": {
@@ -136,7 +135,6 @@
                                         "multipleOf": 1
                                     }
                                 },
-                                "key_count": {"$ref": "qmk.definitions.v1#/key_unit"},
                                 "r": {"$ref": "qmk.definitions.v1#/unsigned_decimal"},
                                 "rx": {"$ref": "qmk.definitions.v1#/unsigned_decimal"},
                                 "ry": {"$ref": "qmk.definitions.v1#/unsigned_decimal"},

data/templates/avr/rules.mk

@@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-BLUETOOTH_ENABLE = no       # Enable Bluetooth
 AUDIO_ENABLE = no           # Audio output

data/templates/base/info.json

@@ -2,8 +2,6 @@
     "keyboard_name": "%KEYBOARD%",
     "url": "",
     "maintainer": "%YOUR_NAME%",
-    "width": 3,
-    "height": 2,
     "layouts": {
         "LAYOUT": {
             "layout": [

data/templates/ps2avrgb/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # Build Options
 #   change yes to no to disable

docs/config_options.md

@@ -397,8 +397,8 @@ However, this will automatically disable the legacy TMK Macros and Functions fea
   * `qmk-dfu`
   * `halfkay`
   * `caterina`
-  * `bootloadHID`
-  * `USBasp`
+  * `bootloadhid`
+  * `usbasploader`
 
 ## Feature Options :id=feature-options
 

docs/driver_installation_zadig.md

@@ -68,31 +68,31 @@ This is a list of known bootloader devices and their USB vendor and product IDs,
 
 The device name here is the name that appears in Zadig, and may not be what the Device Manager or QMK Toolbox displays.
 
-|Bootloader   |Device Name                   |VID/PID       |Driver |
-|-------------|------------------------------|--------------|-------|
-|`atmel-dfu`  |ATmega16u2 DFU                |`03EB:2FEF`   |libusb0|
-|`atmel-dfu`  |ATmega32U2 DFU                |`03EB:2FF0`   |libusb0|
-|`atmel-dfu`  |ATm16U4 DFU V1.0.2            |`03EB:2FF3`   |libusb0|
-|`atmel-dfu`  |ATm32U4DFU                    |`03EB:2FF4`   |libusb0|
-|`atmel-dfu`  |*none* (AT90USB64)            |`03EB:2FF9`   |libusb0|
-|`atmel-dfu`  |AT90USB128 DFU                |`03EB:2FFB`   |libusb0|
-|`qmk-dfu`    |(keyboard name) Bootloader    |As `atmel-dfu`|libusb0|
-|`halfkay`    |*none*                        |`16C0:0478`   |HidUsb |
-|`caterina`   |Pro Micro 3.3V                |`1B4F:9203`   |usbser |
-|`caterina`   |Pro Micro 5V                  |`1B4F:9205`   |usbser |
-|`caterina`   |LilyPadUSB                    |`1B4F:9207`   |usbser |
-|`caterina`   |Pololu A-Star 32U4 Bootloader |`1FFB:0101`   |usbser |
-|`caterina`   |Arduino Leonardo              |`2341:0036`   |usbser |
-|`caterina`   |Arduino Micro                 |`2341:0037`   |usbser |
-|`caterina`   |Adafruit Feather 32u4         |`239A:000C`   |usbser |
-|`caterina`   |Adafruit ItsyBitsy 32u4 3V    |`239A:000D`   |usbser |
-|`caterina`   |Adafruit ItsyBitsy 32u4 5V    |`239A:000E`   |usbser |
-|`caterina`   |Arduino Leonardo              |`2A03:0036`   |usbser |
-|`caterina`   |Arduino Micro                 |`2A03:0037`   |usbser |
-|`bootloadHID`|HIDBoot                       |`16C0:05DF`   |HidUsb |
-|`USBasp`     |USBasp                        |`16C0:05DC`   |libusbK|
-|`apm32-dfu`  |APM32 DFU ISP Mode            |`314B:0106`   |WinUSB |
-|`stm32-dfu`  |STM32 BOOTLOADER              |`0483:DF11`   |WinUSB |
-|`kiibohd`    |Kiibohd DFU Bootloader        |`1C11:B007`   |WinUSB |
-|`stm32duino` |Maple 003                     |`1EAF:0003`   |WinUSB |
-|`qmk-hid`    |(keyboard name) Bootloader    |`03EB:2067`   |HidUsb |
+|Bootloader    |Device Name                   |VID/PID       |Driver |
+|--------------|------------------------------|--------------|-------|
+|`atmel-dfu`   |ATmega16u2 DFU                |`03EB:2FEF`   |libusb0|
+|`atmel-dfu`   |ATmega32U2 DFU                |`03EB:2FF0`   |libusb0|
+|`atmel-dfu`   |ATm16U4 DFU V1.0.2            |`03EB:2FF3`   |libusb0|
+|`atmel-dfu`   |ATm32U4DFU                    |`03EB:2FF4`   |libusb0|
+|`atmel-dfu`   |*none* (AT90USB64)            |`03EB:2FF9`   |libusb0|
+|`atmel-dfu`   |AT90USB128 DFU                |`03EB:2FFB`   |libusb0|
+|`qmk-dfu`     |(keyboard name) Bootloader    |As `atmel-dfu`|libusb0|
+|`halfkay`     |*none*                        |`16C0:0478`   |HidUsb |
+|`caterina`    |Pro Micro 3.3V                |`1B4F:9203`   |usbser |
+|`caterina`    |Pro Micro 5V                  |`1B4F:9205`   |usbser |
+|`caterina`    |LilyPadUSB                    |`1B4F:9207`   |usbser |
+|`caterina`    |Pololu A-Star 32U4 Bootloader |`1FFB:0101`   |usbser |
+|`caterina`    |Arduino Leonardo              |`2341:0036`   |usbser |
+|`caterina`    |Arduino Micro                 |`2341:0037`   |usbser |
+|`caterina`    |Adafruit Feather 32u4         |`239A:000C`   |usbser |
+|`caterina`    |Adafruit ItsyBitsy 32u4 3V    |`239A:000D`   |usbser |
+|`caterina`    |Adafruit ItsyBitsy 32u4 5V    |`239A:000E`   |usbser |
+|`caterina`    |Arduino Leonardo              |`2A03:0036`   |usbser |
+|`caterina`    |Arduino Micro                 |`2A03:0037`   |usbser |
+|`bootloadhid` |HIDBoot                       |`16C0:05DF`   |HidUsb |
+|`usbasploader`|USBasp                        |`16C0:05DC`   |libusbK|
+|`apm32-dfu`   |APM32 DFU ISP Mode            |`314B:0106`   |WinUSB |
+|`stm32-dfu`   |STM32 BOOTLOADER              |`0483:DF11`   |WinUSB |
+|`kiibohd`     |Kiibohd DFU Bootloader        |`1C11:B007`   |WinUSB |
+|`stm32duino`  |Maple 003                     |`1EAF:0003`   |WinUSB |
+|`qmk-hid`     |(keyboard name) Bootloader    |`03EB:2067`   |HidUsb |

docs/feature_led_matrix.md

@@ -164,26 +164,26 @@ You can disable a single effect by defining `DISABLE_[EFFECT_NAME]` in your `con
 
 |Define                                                 |Description                                    |
 |-------------------------------------------------------|-----------------------------------------------|
-|`#define ENABLE_LED_MATRIX_ALPHAS_MODS`                |Enables `LED_MATRIX_ALPHAS_MODS`              |
-|`#define ENABLE_LED_MATRIX_BREATHING`                  |Enables `LED_MATRIX_BREATHING`                |
-|`#define ENABLE_LED_MATRIX_BAND`                       |Enables `LED_MATRIX_BAND`                     |
-|`#define ENABLE_LED_MATRIX_BAND_PINWHEEL`              |Enables `LED_MATRIX_BAND_PINWHEEL`            |
-|`#define ENABLE_LED_MATRIX_BAND_SPIRAL`                |Enables `LED_MATRIX_BAND_SPIRAL`              |
-|`#define ENABLE_LED_MATRIX_CYCLE_LEFT_RIGHT`           |Enables `LED_MATRIX_CYCLE_LEFT_RIGHT`         |
-|`#define ENABLE_LED_MATRIX_CYCLE_UP_DOWN`              |Enables `LED_MATRIX_CYCLE_UP_DOWN`            |
-|`#define ENABLE_LED_MATRIX_CYCLE_OUT_IN`               |Enables `LED_MATRIX_CYCLE_OUT_IN`             |
-|`#define ENABLE_LED_MATRIX_DUAL_BEACON`                |Enables `LED_MATRIX_DUAL_BEACON`              |
-|`#define ENABLE_LED_MATRIX_SOLID_REACTIVE_SIMPLE`      |Enables `LED_MATRIX_SOLID_REACTIVE_SIMPLE`    |
-|`#define ENABLE_LED_MATRIX_SOLID_REACTIVE_WIDE`        |Enables `LED_MATRIX_SOLID_REACTIVE_WIDE`      |
-|`#define ENABLE_LED_MATRIX_SOLID_REACTIVE_MULTIWIDE`   |Enables `LED_MATRIX_SOLID_REACTIVE_MULTIWIDE` |
-|`#define ENABLE_LED_MATRIX_SOLID_REACTIVE_CROSS`       |Enables `LED_MATRIX_SOLID_REACTIVE_CROSS`     |
-|`#define ENABLE_LED_MATRIX_SOLID_REACTIVE_MULTICROSS`  |Enables `LED_MATRIX_SOLID_REACTIVE_MULTICROSS`|
-|`#define ENABLE_LED_MATRIX_SOLID_REACTIVE_NEXUS`       |Enables `LED_MATRIX_SOLID_REACTIVE_NEXUS`     |
-|`#define ENABLE_LED_MATRIX_SOLID_REACTIVE_MULTINEXUS`  |Enables `LED_MATRIX_SOLID_REACTIVE_MULTINEXUS`|
-|`#define ENABLE_LED_MATRIX_SOLID_SPLASH`               |Enables `LED_MATRIX_SOLID_SPLASH`             |
-|`#define ENABLE_LED_MATRIX_SOLID_MULTISPLASH`          |Enables `LED_MATRIX_SOLID_MULTISPLASH`        |
-|`#define ENABLE_LED_MATRIX_WAVE_LEFT_RIGHT`            |Enables `LED_MATRIX_WAVE_LEFT_RIGHT`          |
-|`#define ENABLE_LED_MATRIX_WAVE_UP_DOWN`               |Enables `LED_MATRIX_WAVE_UP_DOWN`             |
+|`#define DISABLE_LED_MATRIX_ALPHAS_MODS`               |Disables `LED_MATRIX_ALPHAS_MODS`              |
+|`#define DISABLE_LED_MATRIX_BREATHING`                 |Disables `LED_MATRIX_BREATHING`                |
+|`#define DISABLE_LED_MATRIX_BAND`                      |Disables `LED_MATRIX_BAND`                     |
+|`#define DISABLE_LED_MATRIX_BAND_PINWHEEL`             |Disables `LED_MATRIX_BAND_PINWHEEL`            |
+|`#define DISABLE_LED_MATRIX_BAND_SPIRAL`               |Disables `LED_MATRIX_BAND_SPIRAL`              |
+|`#define DISABLE_LED_MATRIX_CYCLE_LEFT_RIGHT`          |Disables `LED_MATRIX_CYCLE_LEFT_RIGHT`         |
+|`#define DISABLE_LED_MATRIX_CYCLE_UP_DOWN`             |Disables `LED_MATRIX_CYCLE_UP_DOWN`            |
+|`#define DISABLE_LED_MATRIX_CYCLE_OUT_IN`              |Disables `LED_MATRIX_CYCLE_OUT_IN`             |
+|`#define DISABLE_LED_MATRIX_DUAL_BEACON`               |Disables `LED_MATRIX_DUAL_BEACON`              |
+|`#define DISABLE_LED_MATRIX_SOLID_REACTIVE_SIMPLE`     |Disables `LED_MATRIX_SOLID_REACTIVE_SIMPLE`    |
+|`#define DISABLE_LED_MATRIX_SOLID_REACTIVE_WIDE`       |Disables `LED_MATRIX_SOLID_REACTIVE_WIDE`      |
+|`#define DISABLE_LED_MATRIX_SOLID_REACTIVE_MULTIWIDE`  |Disables `LED_MATRIX_SOLID_REACTIVE_MULTIWIDE` |
+|`#define DISABLE_LED_MATRIX_SOLID_REACTIVE_CROSS`      |Disables `LED_MATRIX_SOLID_REACTIVE_CROSS`     |
+|`#define DISABLE_LED_MATRIX_SOLID_REACTIVE_MULTICROSS` |Disables `LED_MATRIX_SOLID_REACTIVE_MULTICROSS`|
+|`#define DISABLE_LED_MATRIX_SOLID_REACTIVE_NEXUS`      |Disables `LED_MATRIX_SOLID_REACTIVE_NEXUS`     |
+|`#define DISABLE_LED_MATRIX_SOLID_REACTIVE_MULTINEXUS` |Disables `LED_MATRIX_SOLID_REACTIVE_MULTINEXUS`|
+|`#define DISABLE_LED_MATRIX_SOLID_SPLASH`              |Disables `LED_MATRIX_SOLID_SPLASH`             |
+|`#define DISABLE_LED_MATRIX_SOLID_MULTISPLASH`         |Disables `LED_MATRIX_SOLID_MULTISPLASH`        |
+|`#define DISABLE_LED_MATRIX_WAVE_LEFT_RIGHT`           |Disables `LED_MATRIX_WAVE_LEFT_RIGHT`          |
+|`#define DISABLE_LED_MATRIX_WAVE_UP_DOWN`              |Disables `LED_MATRIX_WAVE_UP_DOWN`             |
 
 ## Custom LED Matrix Effects :id=custom-led-matrix-effects
 

docs/feature_oled_driver.md

@@ -18,7 +18,7 @@ Hardware configurations using Arm-based microcontrollers or different sizes of O
 
 ## Usage
 
-To enable the OLED feature, there are three steps. First, when compiling your keyboard, you'll need to add the following to your `rules.mk`:
+To enable the OLED feature, there are two steps. First, when compiling your keyboard, you'll need to add the following to your `rules.mk`:
 
 ```make
 OLED_ENABLE = yes

docs/feature_rgb_matrix.md

@@ -448,46 +448,46 @@ You can disable a single effect by defining `DISABLE_[EFFECT_NAME]` in your `con
 
 |Define                                                 |Description                                    |
 |-------------------------------------------------------|-----------------------------------------------|
-|`#define ENABLE_RGB_MATRIX_ALPHAS_MODS`               |Enables `RGB_MATRIX_ALPHAS_MODS`              |
-|`#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN`          |Enables `RGB_MATRIX_GRADIENT_UP_DOWN`         |
-|`#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT`       |Enables `MATRIX_GRADIENT_LEFT_RIGHT`          |
-|`#define ENABLE_RGB_MATRIX_BREATHING`                 |Enables `RGB_MATRIX_BREATHING`                |
-|`#define ENABLE_RGB_MATRIX_BAND_SAT`                  |Enables `RGB_MATRIX_BAND_SAT`                 |
-|`#define ENABLE_RGB_MATRIX_BAND_VAL`                  |Enables `RGB_MATRIX_BAND_VAL`                 |
-|`#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT`         |Enables `RGB_MATRIX_BAND_PINWHEEL_SAT`        |
-|`#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL`         |Enables `RGB_MATRIX_BAND_PINWHEEL_VAL`        |
-|`#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT`           |Enables `RGB_MATRIX_BAND_SPIRAL_SAT`          |
-|`#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL`           |Enables `RGB_MATRIX_BAND_SPIRAL_VAL`          |
-|`#define ENABLE_RGB_MATRIX_CYCLE_ALL`                 |Enables `RGB_MATRIX_CYCLE_ALL`                |
-|`#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT`          |Enables `RGB_MATRIX_CYCLE_LEFT_RIGHT`         |
-|`#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN`             |Enables `RGB_MATRIX_CYCLE_UP_DOWN`            |
-|`#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON`    |Enables `RGB_MATRIX_RAINBOW_MOVING_CHEVRON`   |
-|`#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN`              |Enables `RGB_MATRIX_CYCLE_OUT_IN`             |
-|`#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL`         |Enables `RGB_MATRIX_CYCLE_OUT_IN_DUAL`        |
-|`#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL`            |Enables `RGB_MATRIX_CYCLE_PINWHEEL`           |
-|`#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL`              |Enables `RGB_MATRIX_CYCLE_SPIRAL`             |
-|`#define ENABLE_RGB_MATRIX_DUAL_BEACON`               |Enables `RGB_MATRIX_DUAL_BEACON`              |
-|`#define ENABLE_RGB_MATRIX_RAINBOW_BEACON`            |Enables `RGB_MATRIX_RAINBOW_BEACON`           |
-|`#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS`         |Enables `RGB_MATRIX_RAINBOW_PINWHEELS`        |
-|`#define ENABLE_RGB_MATRIX_RAINDROPS`                 |Enables `RGB_MATRIX_RAINDROPS`                |
-|`#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS`       |Enables `RGB_MATRIX_JELLYBEAN_RAINDROPS`      |
-|`#define ENABLE_RGB_MATRIX_HUE_BREATHING`             |Enables `RGB_MATRIX_HUE_BREATHING`            |
-|`#define ENABLE_RGB_MATRIX_HUE_PENDULUM`              |Enables `RGB_MATRIX_HUE_PENDULUM`             |
-|`#define ENABLE_RGB_MATRIX_HUE_WAVE `                 |Enables `RGB_MATRIX_HUE_WAVE `                |
-|`#define ENABLE_RGB_MATRIX_TYPING_HEATMAP`            |Enables `RGB_MATRIX_TYPING_HEATMAP`           |
-|`#define ENABLE_RGB_MATRIX_DIGITAL_RAIN`              |Enables `RGB_MATRIX_DIGITAL_RAIN`             |
-|`#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE`     |Enables `RGB_MATRIX_SOLID_REACTIVE_SIMPLE`    |
-|`#define ENABLE_RGB_MATRIX_SOLID_REACTIVE`            |Enables `RGB_MATRIX_SOLID_REACTIVE`           |
-|`#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE`       |Enables `RGB_MATRIX_SOLID_REACTIVE_WIDE`      |
-|`#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE`  |Enables `RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE` |
-|`#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS`      |Enables `RGB_MATRIX_SOLID_REACTIVE_CROSS`     |
-|`#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS` |Enables `RGB_MATRIX_SOLID_REACTIVE_MULTICROSS`|
-|`#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS`      |Enables `RGB_MATRIX_SOLID_REACTIVE_NEXUS`     |
-|`#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS` |Enables `RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS`|
-|`#define ENABLE_RGB_MATRIX_SPLASH`                    |Enables `RGB_MATRIX_SPLASH`                   |
-|`#define ENABLE_RGB_MATRIX_MULTISPLASH`               |Enables `RGB_MATRIX_MULTISPLASH`              |
-|`#define ENABLE_RGB_MATRIX_SOLID_SPLASH`              |Enables `RGB_MATRIX_SOLID_SPLASH`             |
-|`#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH`         |Enables `RGB_MATRIX_SOLID_MULTISPLASH`        |
+|`#define DISABLE_RGB_MATRIX_ALPHAS_MODS`               |Disables `RGB_MATRIX_ALPHAS_MODS`              |
+|`#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN`          |Disables `RGB_MATRIX_GRADIENT_UP_DOWN`         |
+|`#define DISABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT`       |Disables `MATRIX_GRADIENT_LEFT_RIGHT`          |
+|`#define DISABLE_RGB_MATRIX_BREATHING`                 |Disables `RGB_MATRIX_BREATHING`                |
+|`#define DISABLE_RGB_MATRIX_BAND_SAT`                  |Disables `RGB_MATRIX_BAND_SAT`                 |
+|`#define DISABLE_RGB_MATRIX_BAND_VAL`                  |Disables `RGB_MATRIX_BAND_VAL`                 |
+|`#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT`         |Disables `RGB_MATRIX_BAND_PINWHEEL_SAT`        |
+|`#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL`         |Disables `RGB_MATRIX_BAND_PINWHEEL_VAL`        |
+|`#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT`           |Disables `RGB_MATRIX_BAND_SPIRAL_SAT`          |
+|`#define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL`           |Disables `RGB_MATRIX_BAND_SPIRAL_VAL`          |
+|`#define DISABLE_RGB_MATRIX_CYCLE_ALL`                 |Disables `RGB_MATRIX_CYCLE_ALL`                |
+|`#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT`          |Disables `RGB_MATRIX_CYCLE_LEFT_RIGHT`         |
+|`#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN`             |Disables `RGB_MATRIX_CYCLE_UP_DOWN`            |
+|`#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON`    |Disables `RGB_MATRIX_RAINBOW_MOVING_CHEVRON`   |
+|`#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN`              |Disables `RGB_MATRIX_CYCLE_OUT_IN`             |
+|`#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL`         |Disables `RGB_MATRIX_CYCLE_OUT_IN_DUAL`        |
+|`#define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL`            |Disables `RGB_MATRIX_CYCLE_PINWHEEL`           |
+|`#define DISABLE_RGB_MATRIX_CYCLE_SPIRAL`              |Disables `RGB_MATRIX_CYCLE_SPIRAL`             |
+|`#define DISABLE_RGB_MATRIX_DUAL_BEACON`               |Disables `RGB_MATRIX_DUAL_BEACON`              |
+|`#define DISABLE_RGB_MATRIX_RAINBOW_BEACON`            |Disables `RGB_MATRIX_RAINBOW_BEACON`           |
+|`#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS`         |Disables `RGB_MATRIX_RAINBOW_PINWHEELS`        |
+|`#define DISABLE_RGB_MATRIX_RAINDROPS`                 |Disables `RGB_MATRIX_RAINDROPS`                |
+|`#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS`       |Disables `RGB_MATRIX_JELLYBEAN_RAINDROPS`      |
+|`#define DISABLE_RGB_MATRIX_HUE_BREATHING`             |Disables `RGB_MATRIX_HUE_BREATHING`            |
+|`#define DISABLE_RGB_MATRIX_HUE_PENDULUM`              |Disables `RGB_MATRIX_HUE_PENDULUM`             |
+|`#define DISABLE_RGB_MATRIX_HUE_WAVE `                 |Disables `RGB_MATRIX_HUE_WAVE `                |
+|`#define DISABLE_RGB_MATRIX_TYPING_HEATMAP`            |Disables `RGB_MATRIX_TYPING_HEATMAP`           |
+|`#define DISABLE_RGB_MATRIX_DIGITAL_RAIN`              |Disables `RGB_MATRIX_DIGITAL_RAIN`             |
+|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE`     |Disables `RGB_MATRIX_SOLID_REACTIVE_SIMPLE`    |
+|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE`            |Disables `RGB_MATRIX_SOLID_REACTIVE`           |
+|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE`       |Disables `RGB_MATRIX_SOLID_REACTIVE_WIDE`      |
+|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE`  |Disables `RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE` |
+|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS`      |Disables `RGB_MATRIX_SOLID_REACTIVE_CROSS`     |
+|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS` |Disables `RGB_MATRIX_SOLID_REACTIVE_MULTICROSS`|
+|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS`      |Disables `RGB_MATRIX_SOLID_REACTIVE_NEXUS`     |
+|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS` |Disables `RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS`|
+|`#define DISABLE_RGB_MATRIX_SPLASH`                    |Disables `RGB_MATRIX_SPLASH`                   |
+|`#define DISABLE_RGB_MATRIX_MULTISPLASH`               |Disables `RGB_MATRIX_MULTISPLASH`              |
+|`#define DISABLE_RGB_MATRIX_SOLID_SPLASH`              |Disables `RGB_MATRIX_SOLID_SPLASH`             |
+|`#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH`         |Disables `RGB_MATRIX_SOLID_MULTISPLASH`        |
 
 ### RGB Matrix Effect Typing Heatmap :id=rgb-matrix-effect-typing-heatmap
 

docs/flashing.md

@@ -127,7 +127,7 @@ To ensure compatibility with the USBasploader bootloader, make sure this block i
 
 ```make
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 ```
 
 Compatible flashers:
@@ -153,13 +153,13 @@ To ensure compatibility with the bootloadHID bootloader, make sure this block is
 
 ```make
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 ```
 
 Compatible flashers:
 
 * [QMK Toolbox](https://github.com/qmk/qmk_toolbox/releases) (recommended GUI)
-* [bootloadHID CLI](https://www.obdev.at/products/vusb/bootloadhid.html) / `:bootloadHID` target in QMK (recommended command line)
+* [bootloadHID CLI](https://www.obdev.at/products/vusb/bootloadhid.html) / `:bootloadhid` target in QMK (recommended command line)
 * [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash)
 
 Flashing sequence:

docs/flashing_bootloadhid.md

@@ -15,9 +15,9 @@ General flashing sequence:
 
 ?> Using the QMK installation script, detailed [here](newbs_getting_started.md), the required bootloadHID tools should be automatically installed.
 
-To flash via the command line, use the target `:bootloadHID` by executing the following command:
+To flash via the command line, use the target `:bootloadhid` by executing the following command:
 
-    make <keyboard>:<keymap>:bootloadHID
+    make <keyboard>:<keymap>:bootloadhid
 
 ## GUI Flashing
 

docs/getting_started_make_guide.md

@@ -14,7 +14,7 @@ The full syntax of the `make` command is `<keyboard_folder>:<keymap>:<target>`,
 The `<target>` means the following
 * If no target is given, then it's the same as `all` below
 * `all` compiles as many keyboard/revision/keymap combinations as specified. For example, `make planck/rev4:default` will generate a single .hex, while `make planck/rev4:all` will generate a hex for every keymap available to the planck.
-* `flash`, `dfu`, `teensy`, `avrdude`, `dfu-util`, or `bootloadHID` compile and upload the firmware to the keyboard. If the compilation fails, then nothing will be uploaded. The programmer to use depends on the keyboard. For most keyboards it's `dfu`, but for ChibiOS keyboards you should use `dfu-util`, and `teensy` for standard Teensys. To find out which command you should use for your keyboard, check the keyboard specific readme. 
+* `flash`, `dfu`, `teensy`, `avrdude`, `dfu-util`, or `bootloadhid` compile and upload the firmware to the keyboard. If the compilation fails, then nothing will be uploaded. The programmer to use depends on the keyboard. For most keyboards it's `dfu`, but for ChibiOS keyboards you should use `dfu-util`, and `teensy` for standard Teensys. To find out which command you should use for your keyboard, check the keyboard specific readme. 
   Visit the [Flashing Firmware](flashing.md) guide for more details of the available bootloaders.
   * **Note**: some operating systems need privileged access for these commands to work. This means that you may need to setup [`udev rules`](faq_build.md#linux-udev-rules) to access these without root access, or to run the command with root access (`sudo make planck/rev4:default:flash`).
 * `clean`, cleans the build output folders to make sure that everything is built from scratch. Run this before normal compilation if you have some unexplainable problems.

docs/ja/compatible_microcontrollers.md

@@ -1,8 +1,8 @@
 # 互換性のあるマイクロコントローラ
 
 <!---
-  original document: 0.9.19:docs/compatible_microcontrollers.md
-  git diff 0.9.19 HEAD -- docs/compatible_microcontrollers.md | cat
+  original document: 0.14.14:docs/compatible_microcontrollers.md
+  git diff 0.14.14 HEAD -- docs/compatible_microcontrollers.md | cat
 -->
 
 QMK は十分な容量のフラッシュメモリを備えた USB 対応 AVR または ARM マイクロコントローラで実行されます - 一般的に 32kB 以上ですが、ほとんどの機能を無効にすると*ほんの* 16kB に詰め込むことができます。

docs/ja/reference_info_json.md

@@ -25,14 +25,8 @@
 
 ### レイアウトの形式
 
-`info.json` ファイル内の辞書の `layouts` 部分は、幾つかの入れ子になった辞書を含みます。外側のレイヤーは QMK レイアウトマクロで構成されます。例えば、`LAYOUT_ansi` あるいは `LAYOUT_iso`。各レイアウトマクロ内には、`width`、 `height`、`key_count` のキーがあります。これらは自明でなければなりません。
+`info.json` ファイル内の辞書の `layouts` 部分は、幾つかの入れ子になった辞書を含みます。外側のレイヤーは QMK レイアウトマクロで構成されます。例えば、`LAYOUT_ansi` あるいは `LAYOUT_iso`。
 
-* `width`
-   * オプション: キー単位でのレイアウトの幅
-* `height`
-   * オプション: キー単位でのレイアウトの高さ
-* `key_count`
-   * オプション: このレイアウトのキーの数
 * `layout`
    * 物理レイアウトを説明するキー辞書のリスト。詳細は次のセクションを見てください。
 

docs/reference_info_json.md

@@ -32,14 +32,8 @@ The `info.json` file is a JSON formatted dictionary with the following keys avai
 
 ### Layout Format
 
-Within our `info.json` file the `layouts` portion of the dictionary contains several nested dictionaries. The outer layer consists of QMK layout macros, for example `LAYOUT_ansi` or `LAYOUT_iso`. Within each layout macro are keys for `width`, `height`, and `key_count`, each of which should be self-explanatory.
+Within our `info.json` file the `layouts` portion of the dictionary contains several nested dictionaries. The outer layer consists of QMK layout macros, for example `LAYOUT_ansi` or `LAYOUT_iso`.
 
-* `width`
-  * Optional: The width of the layout in Key Units
-* `height`
-  * Optional: The height of the layout in Key Units
-* `key_count`
-  * Optional: The number of keys in this layout
 * `layout`
   * A list of Key Dictionaries describing the physical layout. See the next section for more details.
 

drivers/led/issi/is31fl3741.c

@@ -73,7 +73,7 @@ uint8_t g_twi_transfer_buffer[20] = {0xFF};
 // buffers and the transfers in IS31FL3741_write_pwm_buffer() but it's
 // probably not worth the extra complexity.
 uint8_t g_pwm_buffer[DRIVER_COUNT][ISSI_MAX_LEDS];
-bool    g_pwm_buffer_update_required                      = false;
+bool    g_pwm_buffer_update_required[DRIVER_COUNT]        = {false};
 bool    g_scaling_registers_update_required[DRIVER_COUNT] = {false};
 
 uint8_t g_scaling_registers[DRIVER_COUNT][ISSI_MAX_LEDS];
@@ -169,10 +169,10 @@ void IS31FL3741_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {
     if (index >= 0 && index < DRIVER_LED_TOTAL) {
         is31_led led = g_is31_leds[index];
 
-        g_pwm_buffer[led.driver][led.r] = red;
-        g_pwm_buffer[led.driver][led.g] = green;
-        g_pwm_buffer[led.driver][led.b] = blue;
-        g_pwm_buffer_update_required    = true;
+        g_pwm_buffer[led.driver][led.r]          = red;
+        g_pwm_buffer[led.driver][led.g]          = green;
+        g_pwm_buffer[led.driver][led.b]          = blue;
+        g_pwm_buffer_update_required[led.driver] = true;
     }
 }
 
@@ -206,12 +206,12 @@ void IS31FL3741_set_led_control_register(uint8_t index, bool red, bool green, bo
     g_scaling_registers_update_required[led.driver] = true;
 }
 
-void IS31FL3741_update_pwm_buffers(uint8_t addr1, uint8_t addr2) {
-    if (g_pwm_buffer_update_required) {
-        IS31FL3741_write_pwm_buffer(addr1, g_pwm_buffer[0]);
+void IS31FL3741_update_pwm_buffers(uint8_t addr, uint8_t index) {
+    if (g_pwm_buffer_update_required[index]) {
+        IS31FL3741_write_pwm_buffer(addr, g_pwm_buffer[index]);
     }
 
-    g_pwm_buffer_update_required = false;
+    g_pwm_buffer_update_required[index] = false;
 }
 
 void IS31FL3741_set_pwm_buffer(const is31_led *pled, uint8_t red, uint8_t green, uint8_t blue) {
@@ -219,7 +219,7 @@ void IS31FL3741_set_pwm_buffer(const is31_led *pled, uint8_t red, uint8_t green,
     g_pwm_buffer[pled->driver][pled->g] = green;
     g_pwm_buffer[pled->driver][pled->b] = blue;
 
-    g_pwm_buffer_update_required = true;
+    g_pwm_buffer_update_required[pled->driver] = true;
 }
 
 void IS31FL3741_update_led_control_registers(uint8_t addr, uint8_t index) {

drivers/led/issi/is31fl3741.h

@@ -45,8 +45,8 @@ void IS31FL3741_set_led_control_register(uint8_t index, bool red, bool green, bo
 // (eg. from a timer interrupt).
 // Call this while idle (in between matrix scans).
 // If the buffer is dirty, it will update the driver with the buffer.
-void IS31FL3741_update_pwm_buffers(uint8_t addr1, uint8_t addr2);
-void IS31FL3741_update_led_control_registers(uint8_t addr1, uint8_t addr2);
+void IS31FL3741_update_pwm_buffers(uint8_t addr, uint8_t index);
+void IS31FL3741_update_led_control_registers(uint8_t addr, uint8_t index);
 void IS31FL3741_set_scaling_registers(const is31_led *pled, uint8_t red, uint8_t green, uint8_t blue);
 
 void IS31FL3741_set_pwm_buffer(const is31_led *pled, uint8_t red, uint8_t green, uint8_t blue);

keyboards/0_sixty/info.json

@@ -2,8 +2,6 @@
     "keyboard_name": "0-Sixty",
     "url": "",
     "maintainer": "vinamarora8",
-    "width": 12,
-    "height": 5,
     "layouts": {
 	"LAYOUT_1x2uC": {
             "layout": [

keyboards/0_sixty/rules.mk

@@ -17,5 +17,4 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-BLUETOOTH_ENABLE = no       # Enable Bluetooth
 AUDIO_ENABLE = no           # Audio output

keyboards/0xc7/61key/rules.mk

@@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-BLUETOOTH_ENABLE = no       # Enable Bluetooth
 AUDIO_ENABLE = no           # Audio output
 
 LTO_ENABLE = yes

keyboards/0xcb/1337/info.json

@@ -2,8 +2,6 @@
   "keyboard_name": "0xCB 1337",
   "url": "https://0xCB.dev",
   "maintainer": "Conor-Burns",
-  "width": 3,
-  "height": 3,
   "layouts": {
     "LAYOUT": {
       "layout": [

keyboards/0xcb/1337/rules.mk

@@ -19,7 +19,6 @@ NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth
 AUDIO_ENABLE = no           # Audio output
 
 ENCODER_ENABLE = yes

keyboards/0xcb/static/info.json

@@ -2,8 +2,6 @@
   "keyboard_name": "0xCB Static",
   "url": "https://0xCB.dev",
   "maintainer": "Conor-Burns",
-  "width": 12,
-  "height": 5,
   "layout_aliases": {
     "LAYOUT": "LAYOUT_all"
   },

keyboards/0xcb/static/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega328p
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable
@@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-BLUETOOTH_ENABLE = no       # Enable Bluetooth
 AUDIO_ENABLE = no           # Audio output
 
 ENCODER_ENABLE = yes

keyboards/10bleoledhub/info.json

@@ -2,9 +2,6 @@
     "keyboard_name": "10bleoledhub",
     "url": "https://github.com/haierwangwei2005/10BLE-OLED-HUB",
     "maintainer": "haierwangwei2005",
-
-    "width": 4,
-    "height": 3,
     "layouts": {
         "LAYOUT": {
             "layout": [

keyboards/1upkeyboards/1up60hse/info.json

@@ -2,8 +2,6 @@
     "keyboard_name": "1up60hse",
     "url": "",
     "maintainer": "qmk",
-    "width": 15,
-    "height": 5,
     "layouts": {
         "LAYOUT_60_ansi": {
             "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]

keyboards/1upkeyboards/1up60hse/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
 
 # Build Options
@@ -26,7 +19,6 @@ NKRO_ENABLE = yes            # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 EXTRAFLAGS += -flto
 

keyboards/1upkeyboards/1up60hte/info.json

@@ -2,8 +2,6 @@
     "keyboard_name": "1up60hte",
     "url": "https://www.1upkeyboards.com/shop/controllers/1up-rgb-60-pcb-hte/",
     "maintainer": "1upkeyboards",
-    "width": 15,
-    "height": 5,
     "layout_aliases": {
         "LAYOUT_tsangan": "LAYOUT_60_tsangan_hhkb"
     },

keyboards/1upkeyboards/1up60hte/rules.mk

@@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
-BLUETOOTH_ENABLE = no       # Enable Bluetooth
 AUDIO_ENABLE = no           # Audio output
 
 LTO_ENABLE = yes

keyboards/1upkeyboards/1up60rgb/info.json

@@ -2,8 +2,6 @@
   "keyboard_name": "1up60rgb",
   "url": "",
   "maintainer": "qmk",
-  "width": 15,
-  "height": 5,
   "layouts": {
     "LAYOUT_all": {
       "layout": [

keyboards/1upkeyboards/1up60rgb/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
 
 # Build Options

keyboards/1upkeyboards/super16/info.json

@@ -2,8 +2,6 @@
   "keyboard_name": "super16",
   "url": "",
   "maintainer": "qmk",
-  "width": 4,
-  "height": 4,
   "layouts": {
     "LAYOUT_ortho_4x4": {
       "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}]

keyboards/1upkeyboards/super16/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
 # Build Options
@@ -28,7 +21,6 @@ RGBLIGHT_ENABLE = no       # Enable keyboard RGB underglow
 RGB_MATRIX_ENABLE = yes
 RGB_MATRIX_DRIVER = WS2812
 UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 
 LAYOUTS = ortho_4x4 numpad_4x4

keyboards/1upkeyboards/sweet16/info.json

@@ -2,8 +2,6 @@
   "keyboard_name": "Sweet 16",
   "url": "",
   "maintainer": "skullydazed",
-  "width": 4,
-  "height": 4,
   "layouts": {
       "LAYOUT_ortho_4x4": {
           "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}]

keyboards/1upkeyboards/sweet16/v1/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
 RGBLIGHT_ENABLE = yes

keyboards/1upkeyboards/sweet16/v2/promicro/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
 ## Features

keyboards/2key2crawl/info.json

@@ -2,8 +2,6 @@
     "keyboard_name": "2Key2CrawlPad",
     "url": "",
     "maintainer": "qmk",
-    "width": 6.5,
-    "height": 2,
     "layouts": {
         "LAYOUT": {
             "layout": [

keyboards/2key2crawl/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u2
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
 
 # Build Options

keyboards/30wer/info.json

@@ -2,8 +2,6 @@
     "keyboard_name": "30wer", 
     "url": "", 
     "maintainer": "qmk", 
-    "width": 13.25, 
-    "height": 3, 
     "layouts": {
         "LAYOUT": {
             "layout": [

keyboards/30wer/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
 # Build Options
@@ -24,5 +17,4 @@ NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: ht
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 AUDIO_ENABLE = no           # Audio output
 UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 RGBLIGHT_ENABLE = no 		# Enable WS2812 RGB underlight.

keyboards/3keyecosystem/2key2/2key2.c

@@ -0,0 +1,35 @@
+/*
+Copyright 2021 John Mueller
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "2key2.h"
+
+// RGB Matrix configuration
+// based on https://docs.qmk.fm/#/feature_rgb_matrix?id=common-configuration
+
+#ifdef RGB_MATRIX_ENABLE
+led_config_t g_led_config = { {
+  // Key Matrix to LED Index
+  {   0, 1 }
+}, {
+  // LED Index to Physical Position
+  // Using range { 0..224, 0..64 }
+  { 0,  32 }, { 224,  32 }
+}, {
+  // LED Index to Flag
+  // https://docs.qmk.fm/#/feature_rgb_matrix?id=flags
+  LED_FLAG_ALL, LED_FLAG_ALL
+} };
+#endif

keyboards/3keyecosystem/2key2/2key2.h

@@ -0,0 +1,33 @@
+/*
+Copyright 2021 John Mueller
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    k00, k01 \
+) { \
+    { k00, k01 }  \
+}

keyboards/3keyecosystem/2key2/config.h

@@ -0,0 +1,59 @@
+/*
+Copyright 2021 John Mueller
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0x1209
+#define PRODUCT_ID   0x3304
+#define DEVICE_VER   0x0001
+#define MANUFACTURER 3-Key-Ecosystem
+#define PRODUCT      2key2
+
+/* key matrix size */
+#define MATRIX_ROWS 1
+#define MATRIX_COLS 2
+
+/* Keyboard Matrix Assignments */
+#define MATRIX_ROW_PINS { F6 }
+#define MATRIX_COL_PINS { F4, D7 }
+#define UNUSED_PINS
+
+// LED on kbmount base board is on B7
+#define LED_CAPS_LOCK_PIN B7 // onboard LED for testing
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* RGB matrix key backlighting */
+#define RGB_DI_PIN B2
+#define DRIVER_LED_TOTAL 2
+#define RGB_MATRIX_KEYPRESSES
+#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_REACTIVE
+#define RGB_MATRIX_STARTUP_HUE 90
+#define RGB_MATRIX_STARTUP_SPD 20
+#define RGB_MATRIX_STARTUP_VAL 128
+#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+#define RGB_DISABLE_WHEN_USB_SUSPENDED true
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION

keyboards/3keyecosystem/2key2/info.json

@@ -0,0 +1,13 @@
+{
+    "keyboard_name": "3-Key-Ecosystem 2key2: 2x1 macro-keyboard",
+    "url": "https://github.com/softplus/3keyecosystem/tree/main/2key2",
+    "maintainer": "softplus",
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"label": "k00", "x": 0, "y": 0},
+                {"label": "k01", "x": 1, "y": 0}
+            ]
+        }
+    }
+}

keyboards/3keyecosystem/2key2/keymaps/default/keymap.c

@@ -0,0 +1,40 @@
+/* Copyright 2021 John Mueller
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Base */
+    [_BASE] = LAYOUT(
+        KC_A,    KC_B
+    ),
+
+    [1] = LAYOUT(
+        KC_TRNS, KC_TRNS
+    ),
+
+    [2] = LAYOUT(
+        KC_TRNS, KC_TRNS
+    ),
+
+    [3] = LAYOUT(
+        KC_TRNS, KC_TRNS
+    )
+};

keyboards/3keyecosystem/2key2/keymaps/via/keymap.c

@@ -0,0 +1,40 @@
+/* Copyright 2021 John Mueller
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Base */
+    [_BASE] = LAYOUT(
+        KC_A,    KC_B
+    ),
+
+    [1] = LAYOUT(
+        KC_TRNS, KC_TRNS
+    ),
+
+    [2] = LAYOUT(
+        KC_TRNS, KC_TRNS
+    ),
+
+    [3] = LAYOUT(
+        KC_TRNS, KC_TRNS
+    )
+  };

keyboards/3keyecosystem/2key2/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/3keyecosystem/2key2/readme.md

@@ -0,0 +1,24 @@
+# 3-Key-Ecosystem - 2key2
+
+![keyboard](https://i.imgur.com/IJ1Zyc7.jpeg)
+
+This is a 2x1 macro keyboard with WS2812B key lighting.
+It's designed for a modular keyboard mount using an ATmega32U4.
+
+* Keyboard Maintainer: [softplus](https://github.com/softplus)
+* Hardware Supported: [3keyecosystem-2key2](https://github.com/softplus/3keyecosystem/tree/main/2key2)
+* Hardware Availability: Open-Source files at above link
+
+Make example for this keyboard (after setting up your build environment):
+
+    make 3keyecosystem/2key2:default
+
+Flashing example for this keyboard:
+
+    make 3keyecosystem/2key2:default:flash
+
+## Bootloader
+
+To Enter the bootloader, click reset button on the main board.
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/3keyecosystem/2key2/rules.mk

@@ -0,0 +1,23 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+RGB_MATRIX_ENABLE = yes		# Enable RGB matrix
+RGB_MATRIX_DRIVER = WS2812	# Select WS2812 driver for RGB matrix
+AUDIO_ENABLE = no           # Audio output

keyboards/3w6/info.json

@@ -2,8 +2,6 @@
     "keyboard_name": "3w6",
     "url": "https://github.com/weteor/3W6/",
     "maintainer": "weteor",
-    "width": 13,
-    "height": 5,
     "layouts": {
         "LAYOUT": {
             "layout": [

keyboards/3w6/rev1/rules.mk

@@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-BLUETOOTH_ENABLE = no       # Enable Bluetooth
 AUDIO_ENABLE = no           # Audio output
 UNICODE_ENABLE = yes
 CUSTOM_MATRIX = lite

keyboards/3w6/rev2/rules.mk

@@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-BLUETOOTH_ENABLE = no       # Enable Bluetooth
 AUDIO_ENABLE = no           # Audio output
 UNICODE_ENABLE = yes
 CUSTOM_MATRIX = lite

keyboards/40percentclub/25/info.json

@@ -2,11 +2,8 @@
     "keyboard_name": "foobar",
     "url": "",
     "maintainer": "qmk",
-    "width": 6,
-    "height": 2,
     "layouts": {
         "LAYOUT_ortho_5x5": {
-            "key_count": 15,
             "layout": [
               {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0},
               {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1},
@@ -16,7 +13,6 @@
           ]
         },
         "LAYOUT_ortho_5x10": {
-            "key_count": 30,
             "layout": [
               {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0},
               {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1},

keyboards/40percentclub/25/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
 # Build Options
@@ -26,7 +19,6 @@ NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 
 # Enable generic behavior for split boards

keyboards/40percentclub/4pack/info.json

@@ -2,11 +2,9 @@
     "keyboard_name": "4pack", 
     "url": "", 
     "maintainer": "qmk", 
-    "width": 4, 
-    "height": 1, 
     "layouts": {
         "LAYOUT": {
             "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}]
         }
     }
-}
+}

keyboards/40percentclub/4pack/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
 # Build Options
@@ -26,5 +19,4 @@ NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/40percentclub/4x4/info.json

@@ -2,8 +2,6 @@
     "keyboard_name": "40percent.club 4x4",
     "url": "",
     "maintainer": "qmk",
-    "height": 4,
-    "width": 4,
     "layouts": {
         "LAYOUT_ortho_4x4": {
             "layout": [

keyboards/40percentclub/4x4/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
 # Build Options
@@ -25,7 +18,6 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
 UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 
 LAYOUTS = ortho_4x4 ortho_4x12

keyboards/40percentclub/5x5/info.json

@@ -2,8 +2,6 @@
     "keyboard_name": "40percent.club 5x5",
     "url": "",
     "maintainer": "qmk",
-    "height": 4,
-    "width": 4,
     "layouts": {
         "LAYOUT_ortho_5x5": {
             "layout": [

keyboards/40percentclub/5x5/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
 # Build Options
@@ -25,7 +18,6 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 
 LAYOUTS = ortho_5x15

keyboards/40percentclub/6lit/info.json

@@ -2,18 +2,14 @@
     "keyboard_name": "6lit",
     "url": "",
     "maintainer": "qmk",
-    "width": 6,
-    "height": 2,
     "layouts": {
         "LAYOUT_ortho_2x3": {
-            "key_count": 6,
             "layout": [
               {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0},
               {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}
             ]
         },
         "LAYOUT_ortho_2x6": {
-            "key_count": 12,
             "layout": [
               {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0},
               {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}

keyboards/40percentclub/6lit/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
 # Build Options
@@ -26,7 +19,6 @@ NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 
 # Enable generic behavior for split boards

keyboards/40percentclub/foobar/info.json

@@ -2,11 +2,8 @@
     "keyboard_name": "foobar",
     "url": "",
     "maintainer": "qmk",
-    "width": 10,
-    "height": 3,
     "layouts": {
         "LAYOUT_ortho_3x5": {
-            "key_count": 15,
             "layout": [
               {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0},
               {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1},
@@ -14,7 +11,6 @@
             ]
         },
         "LAYOUT_ortho_3x10": {
-            "key_count": 30,
             "layout": [
               {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0},
               {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1},

keyboards/40percentclub/foobar/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
 # Build Options
@@ -26,7 +19,6 @@ NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 
 # Enable generic behavior for split boards

keyboards/40percentclub/gherkin/info.json

@@ -2,11 +2,8 @@
   "keyboard_name": "Gherkin",
   "url": "",
   "maintainer": "qmk",
-  "width": 10,
-  "height": 3,
   "layouts": {
     "LAYOUT_ortho_3x10": {
-      "key_count": 30,
       "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}]
     }
   }

keyboards/40percentclub/gherkin/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
 # Build Options

keyboards/40percentclub/half_n_half/info.json

@@ -2,11 +2,8 @@
   "keyboard_name": "half_n_half",
   "url": "",
   "maintainer": "qmk",
-  "width": 14,
-  "height": 4,
   "layouts": {
     "LAYOUT": {
-      "key_count": 44,
       "layout": [
           {"label":"L00", "x":0, "y":0},
           {"label":"L01", "x":1, "y":0},
@@ -59,4 +56,3 @@
     }
   }
 }
-  

keyboards/40percentclub/half_n_half/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
 # Build Options
@@ -26,7 +19,6 @@ NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 
 # Enable generic behavior for split boards

keyboards/40percentclub/i75/info.json

@@ -2,8 +2,6 @@
   "keyboard_name": "i75",
   "url": "",
   "maintainer": "qmk",
-  "width": 15,
-  "height": 5,
   "layouts": {
       "LAYOUT_ortho_5x15": {
           "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, {"x":13, "y":1}, {"x":14, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":12, "y":2}, {"x":13, "y":2}, {"x":14, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}, {"x":12, "y":3}, {"x":13, "y":3}, {"x":14, "y":3}, {"x":0, "y":4}, {"x":1, "y":4}, {"x":2, "y":4}, {"x":3, "y":4}, {"x":4, "y":4}, {"x":5, "y":4}, {"x":6, "y":4}, {"x":7, "y":4}, {"x":8, "y":4}, {"x":9, "y":4}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}]

keyboards/40percentclub/i75/promicro/rules.mk

@@ -2,11 +2,4 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = caterina

keyboards/40percentclub/i75/rules.mk

@@ -13,7 +13,6 @@ NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 
 LAYOUTS = ortho_5x15

keyboards/40percentclub/i75/teensy2/rules.mk

@@ -2,11 +2,4 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = halfkay

keyboards/40percentclub/luddite/info.json

@@ -2,8 +2,6 @@
   "keyboard_name": "Luddite",
   "url": "",
   "maintainer": "qmk",
-  "width": 15,
-  "height": 5,
   "layouts": {
     "LAYOUT_60_ansi": {
       "layout": [

keyboards/40percentclub/luddite/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
 # Build Options

keyboards/40percentclub/mf68/info.json

@@ -2,8 +2,6 @@
   "keyboard_name": "MF68",
   "url": "",
   "maintainer": "qmk",
-  "width": 17.25,
-  "height": 5,
   "layouts": {
       "LAYOUT_68_ansi": {
           "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"x":15.25, "y":1}, {"x":16.25, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"x":15.25, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"x":14.25, "y":4}, {"x":15.25, "y":4}, {"x":16.25, "y":4}]

keyboards/40percentclub/mf68/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
 # Build Options
@@ -26,7 +19,6 @@ NKRO_ENABLE = yes            # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 
 LAYOUTS = 68_ansi

keyboards/40percentclub/nano/info.json

@@ -2,8 +2,6 @@
   "keyboard_name": "Nano",
   "url": "",
   "maintainer": "qmk",
-  "width": 4,
-  "height": 2,
   "layouts": {
     "LAYOUT_ortho_2x4": {
       "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}]

keyboards/40percentclub/nano/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
 # Build Options
@@ -24,7 +17,6 @@ NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: ht
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = yes        # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight.
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE

keyboards/40percentclub/nein/info.json

@@ -2,8 +2,6 @@
   "keyboard_name": "nein",
   "url": "http://www.40percent.club/2019/04/nein.html",
   "maintainer": "qmk",
-  "width": 3,
-  "height": 3,
   "layouts": {
     "LAYOUT_ortho_3x3": {
       "layout": [

keyboards/40percentclub/nein/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
 # Build Options
@@ -26,5 +19,4 @@ NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/40percentclub/nori/info.json

@@ -2,11 +2,8 @@
     "keyboard_name": "nori",
     "url": "",
     "maintainer": "qmk",
-    "width": 12,
-    "height": 4,
     "layouts": {
       "LAYOUT_ortho_4x4": {
-          "key_count": 16,
           "layout": [
             { "w": 1, "x": 0, "y": 0 },
             { "w": 1, "x": 1, "y": 0 },
@@ -26,7 +23,6 @@
             { "w": 1, "x": 3, "y": 3 } ]
       },
       "LAYOUT_ortho_4x8": {
-          "key_count": 32,
           "layout": [
             { "w": 1, "x": 0, "y": 0 },
             { "w": 1, "x": 1, "y": 0 },
@@ -62,7 +58,6 @@
             { "w": 1, "x": 7, "y": 3 } ]
       },
         "LAYOUT_ortho_4x12": {
-            "key_count": 48,
             "layout": [
               { "w": 1, "x": 0, "y": 0 },
               { "w": 1, "x": 1, "y": 0 },

keyboards/40percentclub/nori/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
 # Build Options
@@ -26,7 +19,6 @@ NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 
 LAYOUTS = ortho_4x4 ortho_4x12

keyboards/40percentclub/sixpack/info.json

@@ -2,8 +2,6 @@
     "keyboard_name": "Six Pack",
     "url": "https://www.40percent.club/2017/05/six-pack-11.html",
     "maintainer": "qmk",
-    "width": 3,
-    "height": 2,
     "layouts": {
         "LAYOUT_ortho_2x3": {
           "layout": [

keyboards/40percentclub/sixpack/rules.mk

@@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-BLUETOOTH_ENABLE = no       # Enable Bluetooth
 AUDIO_ENABLE = no           # Audio output
 
 LAYOUTS = ortho_2x3

keyboards/40percentclub/tomato/info.json

@@ -2,8 +2,6 @@
   "keyboard_name": "Tomato",
   "url": "",
   "maintainer": "qmk",
-  "width": 10,
-  "height": 3,
   "layouts": {
     "LAYOUT_ortho_3x10": {
       "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}]

keyboards/40percentclub/tomato/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
 # Build Options

keyboards/40percentclub/ut47/info.json

@@ -2,11 +2,8 @@
   "keyboard_name": "UT47",
   "url": "",
   "maintainer": "qmk",
-  "width": 12.5,
-  "height": 4,
   "layouts": {
     "LAYOUT": {
-      "key_count": 47,
       "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"label":"Backspace", "x":11, "y":0, "w":1.5}, {"label":"LT(3) / Tab", "x":0, "y":1, "w":1.25}, {"label":"A", "x":1.25, "y":1}, {"label":"S", "x":2.25, "y":1}, {"label":"D", "x":3.25, "y":1}, {"label":"F", "x":4.25, "y":1}, {"label":"G", "x":5.25, "y":1}, {"label":"H", "x":6.25, "y":1}, {"label":"J", "x":7.25, "y":1}, {"label":"K", "x":8.25, "y":1}, {"label":"L", "x":9.25, "y":1}, {"label":":", "x":10.25, "y":1}, {"label":"\"", "x":11.25, "y":1, "w":1.25}, {"label":"Shift", "x":0, "y":2, "w":1.5}, {"label":"Z", "x":1.5, "y":2}, {"label":"X", "x":2.5, "y":2}, {"label":"C", "x":3.5, "y":2}, {"label":"V", "x":4.5, "y":2}, {"label":"B", "x":5.5, "y":2}, {"label":"N", "x":6.5, "y":2}, {"label":"M", "x":7.5, "y":2}, {"label":"<", "x":8.5, "y":2}, {"label":">", "x":9.5, "y":2}, {"label":"?", "x":10.5, "y":2}, {"label":"Shift / Enter", "x":11.5, "y":2}, {"label":"Ctrl", "x":0, "y":3}, {"label":"Alt", "x":1, "y":3}, {"label":"GUI", "x":2, "y":3}, {"label":"Menu", "x":3, "y":3}, {"label":"MO(2)", "x":4, "y":3, "w":1.25}, {"x":5.25, "y":3, "w":2}, {"label":"MO(1)", "x":7.25, "y":3, "w":1.25}, {"label":"\u2190", "x":8.5, "y":3}, {"label":"\u2193", "x":9.5, "y":3}, {"label":"\u2191", "x":10.5, "y":3}, {"label":"\u2192", "x":11.5, "y":3}]
     }
   }

keyboards/40percentclub/ut47/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
 # Build Options
@@ -25,7 +18,6 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
 UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 
 # custom matrix setup

keyboards/45_ats/info.json

@@ -2,8 +2,6 @@
     "keyboard_name": "45-ATS",
     "url": "",
     "maintainer": "The-Royal",
-    "width": 14.25,
-    "height": 4.25,
     "layouts": {
       "LAYOUT_split_space": {
         "layout": [
@@ -166,4 +164,3 @@
       }
     }
   }
-  

keyboards/45_ats/rules.mk

@@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-BLUETOOTH_ENABLE = no       # Enable Bluetooth
 AUDIO_ENABLE = no           # Audio output

keyboards/4by3/info.json

@@ -2,11 +2,8 @@
     "keyboard_name": "4by3",
     "url": "https://github.com/eliassjogreen/4by3",
     "maintainer": "eliassjogreen",
-    "width": 4,
-    "height": 3,
     "layouts": {
         "LAYOUT_horizontal": {
-            "key_count": 12,
             "layout": [
                 { "x": 0, "y": 0 }, { "x": 1, "y": 0 }, { "x": 2, "y": 0 }, { "x": 3, "y": 0 },
                 { "x": 0, "y": 1 }, { "x": 1, "y": 1 }, { "x": 2, "y": 1 }, { "x": 3, "y": 1 },
@@ -14,7 +11,6 @@
             ]
         },
         "LAYOUT_vertical_right": {
-            "key_count": 12,
             "layout": [
                 { "x": 0, "y": 0 }, { "x": 1, "y": 0 }, { "x": 2, "y": 0 },
                 { "x": 0, "y": 1 }, { "x": 1, "y": 1 }, { "x": 2, "y": 1 },
@@ -23,7 +19,6 @@
             ]
         },
         "LAYOUT_vertical_left": {
-            "key_count": 12,
             "layout": [
                 { "x": 0, "y": 0 }, { "x": 1, "y": 0 }, { "x": 2, "y": 0 },
                 { "x": 0, "y": 1 }, { "x": 1, "y": 1 }, { "x": 2, "y": 1 },

keyboards/4by3/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
 EXTRAKEY_ENABLE 	= yes

keyboards/4pplet/aekiso60/rev_a/info.json

@@ -2,8 +2,6 @@
     "keyboard_name": "AEKISO60 Rev A",
     "url": "",
     "maintainer": "4pplet",
-    "width": 15,
-    "height": 5,
     "layouts": {
         "LAYOUT_all": {
             "layout": [

keyboards/4pplet/aekiso60/rev_a/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u2
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
 
 # Build Options

keyboards/4pplet/bootleg/info.json

@@ -2,8 +2,6 @@
     "keyboard_name": "bootleg Rev A",
     "url": "https://github.com/4pplet/bootlegs",
     "maintainer": "4pplet",
-    "width": 15,
-    "height": 5,
     "layouts": {
         "LAYOUT_all": {
             "layout": [

keyboards/4pplet/bootleg/rev_a/rules.mk

@@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover 
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-BLUETOOTH_ENABLE = no       # Enable Bluetooth
 AUDIO_ENABLE = no           # Audio output

keyboards/4pplet/eagle_viper_rep/info.json

@@ -2,8 +2,6 @@
     "keyboard_name": "Eagle/Viper Rep",
     "url": "https://github.com/4pplet/eagle_viper_rep",
     "maintainer": "4pplet",
-    "width": 15,
-    "height": 5,
     "layouts": {
         "LAYOUT_all": {
             "layout": [

keyboards/4pplet/steezy60/rev_a/info.json

@@ -2,8 +2,6 @@
     "keyboard_name": "Steezy60 Rev A",
     "url": "",
     "maintainer": "4pplet",
-    "width": 15,
-    "height": 5,
     "layouts": {
         "LAYOUT_all": {
             "layout": [

keyboards/4pplet/steezy60/rev_a/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u2
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
 
 # Build Options