Add STM32F401/F411 to mcu_selection.mk (#10278)

* Reorder STM32 MCUs

* Add STM32F4xx to mcu_selection.mk

* Set MCU for phoenix and tkw/stoutgat/v2/f411

.github/workflows/info.yml

@@ -16,7 +16,7 @@ jobs:
       with:
         fetch-depth: 0
 
-    - uses: trilom/file-changes-action@v1.2.3
+    - uses: trilom/file-changes-action@v1.2.4
       id: file_changes
       with:
         output: '\n'

common_features.mk

@@ -397,9 +397,20 @@ ifneq ($(strip $(CUSTOM_MATRIX)), yes)
     endif
 endif
 
+# Support for translating old names to new names:
+ifeq ($(strip $(DEBOUNCE_TYPE)),sym_g)
+    DEBOUNCE_TYPE:=sym_defer_g
+else ifeq ($(strip $(DEBOUNCE_TYPE)),eager_pk)
+    DEBOUNCE_TYPE:=sym_eager_pk
+else ifeq ($(strip $(DEBOUNCE_TYPE)),sym_pk)
+    DEBOUNCE_TYPE:=sym_defer_pk
+else ifeq ($(strip $(DEBOUNCE_TYPE)),eager_pr)
+    DEBOUNCE_TYPE:=sym_eager_pr
+endif
+
 DEBOUNCE_DIR:= $(QUANTUM_DIR)/debounce
 # Debounce Modules. Set DEBOUNCE_TYPE=custom if including one manually.
-DEBOUNCE_TYPE?= sym_g
+DEBOUNCE_TYPE?= sym_defer_g
 ifneq ($(strip $(DEBOUNCE_TYPE)), custom)
     QUANTUM_SRC += $(DEBOUNCE_DIR)/$(strip $(DEBOUNCE_TYPE)).c
 endif

docs/feature_debounce_type.md

@@ -1,43 +1,151 @@
-# Debounce algorithm
+# Contact bounce / contact chatter
+
+Mechanical switches often don't have a clean single transition between pressed and unpressed states.
+
+In an ideal world, when you press a switch, you would expect the digital pin to see something like this:
+(X axis showing time
+```
+voltage                   +----------------------
+ ^                        |
+ |                        |
+ |      ------------------+
+          ----> time
+```
+
+However in the real world you will actually see contact bounce, which will look like multiple 1->0 and 0->1 transitions,
+until the value finally settles.
+```
+                  +-+ +--+ +-------------
+                  | | |  | |
+                  | | |  | |
++-----------------+ +-+  +-+
+```
+The time it takes for the switch to settle might vary with switch type, age, and even pressing technique.
+
+If the device chooses not to mitigate contact bounce, then often actions that happen when the switch is pressed are repeated
+multiple times.
+
+There are many ways to handle contact bounce ("Debouncing"). Some include employing additional hardware, for example an RC filter,
+while there are various ways to do debouncing in software too, often called debounce algorithms. This page discusses software
+debouncing methods available in QMK.
+
+While technically not considered contact bounce/contact chatter, some switch technologies are susceptible to noise, meaning,
+while the key is not changing state, sometimes short random 0->1 or 1->0 transitions might be read by the digital circuit, for example:
+```
+                  +-+
+                  | |
+                  | |
++-----------------+ +--------------------
+```
+
+Many debounce methods (but not all) will also make the device resistant to noise. If you are working with a technology that is
+susceptible to noise, you must choose a debounce method that will also mitigate noise for you.
+
+## Types of debounce algorithms
+
+1) Unit of time: Timestamp (milliseconds) vs Cycles (scans)
+   * Debounce algorithms often have a 'debounce time' parameter, that specifies the maximum settling time of the switch contacts.
+     This time might be measured in various units:
+     * Cycles-based debouncing waits n cycles (scans), decreasing count by one each matrix_scan
+     * Timestamp-based debouncing stores the millisecond timestamp a change occurred, and does substraction to figure out time elapsed.
+   * Timestamp-based debouncing is usually superior, especially in the case of noise-resistant devices because settling times of physical
+     switches is specified in units of time, and should not depend on the matrix scan-rate of the keyboard.
+   * Cycles-based debouncing is sometimes considered inferior, because the settling time that it is able to compensate for depends on the
+     performance of the matrix scanning code. If you use cycles-based debouncing, and you significantly improve the performance of your scanning
+     code, you might end up with less effective debouncing. A situation in which cycles-based debouncing might be preferable is when
+     noise is present, and the scanning algorithm is slow, or variable speed. Even if your debounce algorithm is fundamentally noise-resistant,
+     if the scanning is slow, and you are using a timestamp-based algorithm, you might end up making a debouncing decision based on only two
+     sampled values, which will limit the noise-resistance of the algorithm.
+   * Currently all built-in debounce algorithms support timestamp-based debouncing only. In the future we might
+     implement cycles-based debouncing, and it will be selectable via a ```config.h``` macro.
+
+2) Symmetric vs Asymmetric
+   * Symmetric - apply the same debouncing algorithm, to both key-up and key-down events.
+     * Recommended naming convention: ```sym_*```
+   * Asymmetric - apply different debouncing algorithms to key-down and key-up events. E.g. Eager key-down, Defer key-up.
+     * Recommended naming convention: ```asym_*``` followed by details of the type of algorithm in use, in order, for key-down and then key-up
+
+3) Eager vs Defer
+   * Eager - any key change is reported immediately. All further inputs for DEBOUNCE ms are ignored.
+     * Eager algorithms are not noise-resistant.
+     * Recommended naming conventions:
+        * ```sym_eager_*```
+        * ```asym_eager_*_*```: key-down is using eager algorithm
+        * ```asym_*_eager_*```: key-up is using eager algorithm
+   * Defer - wait for no changes for DEBOUNCE ms before reporting change.
+     * Defer algorithms are noise-resistant
+     * Recommended naming conventions:
+        * ```sym_defer_*```
+        * ```asym_defer_*_*```: key-down is using eager algorithm
+        * ```asym_*_defer_*```: key-up is using eager algorithm
+
+4) Global vs Per-Key vs Per-Row
+   * Global - one timer for all keys. Any key change state affects global timer
+     * Recommended naming convention: ```*_g```
+   * Per-key - one timer per key
+     * Recommended naming convention: ```*_pk```
+   * Per-row - one timer per row
+     * Recommended naming convention: ```*_pr```
+   * Per-key and per-row algorithms consume more resources (in terms of performance,
+     and ram usage), but fast typists might prefer them over global.
+
+## Debounce algorithms supported by QMK
 
 QMK supports multiple debounce algorithms through its debounce API.
-
-The logic for which debounce method called is below. It checks various defines that you have set in rules.mk
+The logic for which debounce method called is below. It checks various defines that you have set in ```rules.mk```
 
 ```
 DEBOUNCE_DIR:= $(QUANTUM_DIR)/debounce
-DEBOUNCE_TYPE?= sym_g
+DEBOUNCE_TYPE?= sym_defer_g
 ifneq ($(strip $(DEBOUNCE_TYPE)), custom)
     QUANTUM_SRC += $(DEBOUNCE_DIR)/$(strip $(DEBOUNCE_TYPE)).c
 endif
 ```
 
-# Debounce selection
+### Debounce selection
 
 | DEBOUNCE_TYPE    | Description                                          | What else is needed           |
 | -------------    | ---------------------------------------------------  | ----------------------------- |
-| Not defined      | Use the default algorithm, currently sym_g           | Nothing                       |
+| Not defined      | Use the default algorithm, currently sym_defer_g     | Nothing                       |
 | custom           | Use your own debounce code                           | ```SRC += debounce.c``` add your own debounce.c and implement necessary functions |
-| anything_else    | Use another algorithm from quantum/debounce/*        | Nothing                       |
+| Anything Else    | Use another algorithm from quantum/debounce/*        | Nothing                       |
 
 **Regarding split keyboards**:
 The debounce code is compatible with split keyboards.
 
-# Use your own debouncing code
-* Set ```DEBOUNCE_TYPE = custom```.
-* Add ```SRC += debounce.c```
+### Selecting an included debouncing method
+Keyboards may select one of the already implemented debounce methods, by adding to ```rules.mk``` the following line:
+```
+DEBOUNCE_TYPE = <name of algorithm>
+```
+Where name of algorithm is one of:
+* ```sym_defer_g``` - debouncing per keyboard. On any state change, a global timer is set. When ```DEBOUNCE``` milliseconds of no changes has occurred, all input changes are pushed.
+  * This is the current default algorithm. This is the highest performance algorithm with lowest memory usage, and it's also noise-resistant.
+* ```sym_eager_pr``` - debouncing per row. On any state change, response is immediate, followed by locking the row ```DEBOUNCE``` milliseconds of no further input for that row. 
+For use in keyboards where refreshing ```NUM_KEYS``` 8-bit counters is computationally expensive / low scan rate, and fingers usually only hit one row at a time. This could be
+appropriate for the ErgoDox models; the matrix is rotated 90°, and hence its "rows" are really columns, and each finger only hits a single "row" at a time in normal use.
+* ```sym_eager_pk``` - debouncing per key. On any state change, response is immediate, followed by ```DEBOUNCE``` milliseconds of no further input for that key
+* ```sym_defer_pk``` - debouncing per key. On any state change, a per-key timer is set. When ```DEBOUNCE``` milliseconds of no changes have occurred on that key, the key status change is pushed.
+
+### A couple algorithms that could be implemented in the future:
+* ```sym_defer_pr```
+* ```sym_eager_g```
+* ```asym_eager_defer_pk```
+
+### Use your own debouncing code
+You have the option to implement you own debouncing algorithm. To do this:
+* Set ```DEBOUNCE_TYPE = custom``` in ```rules.mk```.
+* Add ```SRC += debounce.c``` in ```rules.mk```
 * Add your own ```debounce.c```. Look at current implementations in ```quantum/debounce``` for examples.
 * Debouncing occurs after every raw matrix scan.
 * Use num_rows rather than MATRIX_ROWS, so that split keyboards are supported correctly.
+* If the algorithm might be applicable to other keyboards, please consider adding it to ```quantum/debounce```
 
-# Changing between included debouncing methods
-You can either use your own code, by including your own debounce.c, or switch to another included one.
-Included debounce methods are:
-* eager_pr - debouncing per row. On any state change, response is immediate, followed by locking the row ```DEBOUNCE``` milliseconds of no further input for that row. 
-For use in keyboards where refreshing ```NUM_KEYS``` 8-bit counters is computationally expensive / low scan rate, and fingers usually only hit one row at a time. This could be
-appropriate for the ErgoDox models; the matrix is rotated 90°, and hence its "rows" are really columns, and each finger only hits a single "row" at a time in normal use.
-* eager_pk - debouncing per key. On any state change, response is immediate, followed by ```DEBOUNCE``` milliseconds of no further input for that key
-* sym_g - debouncing per keyboard. On any state change, a global timer is set. When ```DEBOUNCE``` milliseconds of no changes has occured, all input changes are pushed.
-* sym_pk - debouncing per key. On any state change, a per-key timer is set. When ```DEBOUNCE``` milliseconds of no changes have occured on that key, the key status change is pushed.
+### Old names
+The following old names for existing algorithms will continue to be supported, however it is recommended to use the new names instead.
 
+* sym_g - old name for sym_defer_g
+* eager_pk - old name for sym_eager_pk
+* sym_pk - old name for sym_defer_pk
+* eager_pr - old name for sym_eager_pr
 

docs/feature_rgb_matrix.md

@@ -129,7 +129,7 @@ Configure the hardware via your `config.h`:
 From this point forward the configuration is the same for all the drivers. The `led_config_t` struct provides a key electrical matrix to led index lookup table, what the physical position of each LED is on the board, and what type of key or usage the LED if the LED represents. Here is a brief example:
 
 ```c
-const led_config_t g_led_config = { {
+led_config_t g_led_config = { {
   // Key Matrix to LED Index
   {   5, NO_LED, NO_LED,   0 },
   { NO_LED, NO_LED, NO_LED, NO_LED },

docs/feature_split_keyboard.md

@@ -48,11 +48,12 @@ However, USB cables, SATA cables, and even just 4 wires have been known to be us
 
 ### Serial Wiring
 
-The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and D0 (aka PDO or pin 3) between the two Pro Micros. 
+The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and D0/D1/D2/D3 (aka PD0/PD1/PD2/PD3) between the two Pro Micros. 
 
 ?> Note that the pin used here is actually set by `SOFT_SERIAL_PIN` below.
 
-![serial wiring](https://i.imgur.com/C3D1GAQ.png)
+<img alt="sk-pd0-connection-mono" src="https://user-images.githubusercontent.com/2170248/92296488-28e9ad80-ef70-11ea-98be-c40cb48a0319.JPG" width="48%"/>
+<img alt="sk-pd2-connection-mono" src="https://user-images.githubusercontent.com/2170248/92296490-2d15cb00-ef70-11ea-801f-5ace313013e6.JPG" width="48%"/>
 
 ### I<sup>2</sup>C Wiring
 
@@ -60,7 +61,7 @@ The 4 wires of the TRRS cable need to connect GND, VCC, and SCL and SDA (aka PD0
 
 The pull-up resistors may be placed on either half. If you wish to use the halves independently, it is also possible to use 4 resistors and have the pull-ups in both halves.
 
-![I2C wiring](https://i.imgur.com/Hbzhc6E.png)
+<img alt="sk-i2c-connection-mono" src="https://user-images.githubusercontent.com/2170248/92297182-92b98580-ef77-11ea-9d7d-d6033914af43.JPG" width="50%"/>
 
 ## Firmware Configuration
 

docs/ja/feature_split_keyboard.md

@@ -1,8 +1,8 @@
 # 分割キーボード
 
 <!---
-  original document:0.9.43:docs/feature_split_keyboard.md
-  git diff 0.9.43 HEAD -- docs/feature_split_keyboard.md | cat
+  original document:0.10.8:docs/feature_split_keyboard.md
+  git diff 0.10.8 HEAD -- docs/feature_split_keyboard.md | cat
 -->
 
 QMK ファームウェアリポジトリの多くのキーボードは、"分割"キーボードです。それらは2つのコントローラを使います — 1つは USB に接続し、もう1つは TRRS または同様のケーブルを介してシリアルまたは I<sup>2</sup>C 接続で接続します。
@@ -53,11 +53,12 @@ QMK ファームウェアには、任意のキーボードで使用可能な一
 
 ### シリアル配線
 
-2つの Pro Micro 間で GND、Vcc、D0 (別名 PDO あるいは pin 3) を TRS/TRRS ケーブルの3本のワイヤで接続します。
+2つの Pro Micro 間で GND、Vcc、D0/D1/D2/D3 (別名 PD0/PD1/PD2/PD3) を TRS/TRRS ケーブルの3本のワイヤで接続します。
 
 ?> ここで使われるピンは実際には以下の `SOFT_SERIAL_PIN` によって設定されることに注意してください。
 
-![シリアル配線](https://i.imgur.com/C3D1GAQ.png)
+<img alt="sk-pd0-connection-mono" src="https://user-images.githubusercontent.com/2170248/92296488-28e9ad80-ef70-11ea-98be-c40cb48a0319.JPG" width="48%"/>
+<img alt="sk-pd2-connection-mono" src="https://user-images.githubusercontent.com/2170248/92296490-2d15cb00-ef70-11ea-801f-5ace313013e6.JPG" width="48%"/>
 
 ### I<sup>2</sup>C 配線
 
@@ -65,7 +66,7 @@ QMK ファームウェアには、任意のキーボードで使用可能な一
 
 プルアップ抵抗はキーボードの左右どちら側にも配置することができます。もし各側を単独で使いたい場合は、4つの抵抗を使い、両側にプルアップ抵抗を配置することもできます。
 
-![I2C 配線](https://i.imgur.com/Hbzhc6E.png)
+<img alt="sk-i2c-connection-mono" src="https://user-images.githubusercontent.com/2170248/92297182-92b98580-ef77-11ea-9d7d-d6033914af43.JPG" width="50%"/>
 
 ## ファームウェア設定
 

docs/ja/reference_configurator_support.md

@@ -0,0 +1,202 @@
+# QMK Configurator でのキーボードのサポート
+
+<!---
+  original document: 0.9.46:docs/reference_configurator_support.md
+  git diff 0.9.46 HEAD -- docs/reference_configurator_support.md | cat
+-->
+
+このページは [QMK Configurator](https://config.qmk.fm/) でキーボードを適切にサポートする方法について説明します。
+
+
+## Configurator がキーボードを理解する方法
+
+Configurator がキーボードをどのように理解するかを理解するには、最初にレイアウトマクロを理解する必要があります。この演習では、17キーのテンキー PCB を想定します。これを `numpad` と呼びます。
+
+```
+|---------------|
+|NLk| / | * | - |
+|---+---+---+---|
+|7  |8  |9  | + |
+|---+---+---|   |
+|4  |5  |6  |   |
+|---+---+---+---|
+|1  |2  |3  |Ent|
+|-------+---|   |
+|0      | . |   |
+|---------------|
+```
+
+?> レイアウトマクロの詳細については、[QMK の理解: マトリックススキャン](ja/understanding_qmk.md?id=matrix-scanning) と [QMK の理解: マトリックスから物理レイアウトへのマップ](ja/understanding_qmk.md?id=matrix-to-physical-layout-map) を見てください。
+
+Configurator の API はキーボードの `.h` ファイルを `qmk_firmware/keyboards/<keyboard>/<keyboard>.h` から読み取ります。numpad の場合、このファイルは `qmk_firmware/keyboards/numpad/numpad.h` です:
+
+```c
+#pragma once
+
+#define LAYOUT( \
+    k00, k01, k02, k03, \
+    k10, k11, k12, k13, \
+    k20, k21, k22,      \
+    k30, k31, k32, k33, \
+    k40,      k42       \
+  ) { \
+    { k00, k01,   k02, k03   }, \
+    { k10, k11,   k12, k13   }, \
+    { k20, k21,   k22, KC_NO }, \
+    { k30, k31,   k32, k33   }, \
+    { k40, KC_NO, k42, KC_NO }  \
+}
+```
+
+QMK は `KC_NO` を使って、スイッチマトリックス内のスイッチがない場所を指定します。デバッグが必要な場合に、このセクションを読みやすくするために、`XXX`、`___`、`____` を略記として使うこともあります。通常は `.h` ファイルの先頭近くで定義されます:
+
+```c
+#pragma once
+
+#define XXX KC_NO
+
+#define LAYOUT( \
+    k00, k01, k02, k03, \
+    k10, k11, k12, k13, \
+    k20, k21, k22,      \
+    k30, k31, k32, k33, \
+    k40,      k42       \
+  ) { \
+    { k00, k01, k02, k03 }, \
+    { k10, k11, k12, k13 }, \
+    { k20, k21, k22, XXX }, \
+    { k30, k31, k32, k33 }, \
+    { k40, XXX, k42, XXX }  \
+}
+```
+
+!> この使用方法はキーマップマクロと異なります。キーマップマクロはほとんど常に`KC_NO`については`XXXXXXX` (7つの大文字の X) を、`KC_TRNS` については `_______` (7つのアンダースコア)を使います。
+
+!> ユーザの混乱を防ぐために、`KC_NO` を使うことをお勧めします。
+
+レイアウトマクロは、キーボードに17個のキーがあり、4列それぞれが5行に配置されていることを Configurator に伝えます。スイッチの位置は、0から始まる `k<row><column>` という名前が付けられています。キーマップからキーコードを受け取る上部セクションと、マトリックス内の各キーの位置を指定する下部セクションとが一致する限り、名前自体は実際には問題ではありません。
+
+物理的なキーボードに似た形でキーボードを表示するには、それぞれのキーの物理的な位置とサイズをスイッチマトリックスに結びつけることを Configurator に伝える JSON ファイルを作成する必要があります。
+
+## JSON ファイルのビルド
+
+JSON ファイルをビルドする最も簡単な方法は、[Keyboard Layout Editor](http://www.keyboard-layout-editor.com/) ("KLE") でレイアウトを作成することです。この Raw Data を QMK tool に入れて、Configurator が読み出して使用する JSON ファイルに変換します。KLE は numpad レイアウトをデフォルトで開くため、Getting Started の説明を削除し、残りを使います。
+
+レイアウトが望み通りのものになったら、KLE の Raw Data タブに移動し、内容をコピーします:
+
+```
+["Num Lock","/","*","-"],
+["7\nHome","8\n↑","9\nPgUp",{h:2},"+"],
+["4\n←","5","6\n→"],
+["1\nEnd","2\n↓","3\nPgDn",{h:2},"Enter"],
+[{w:2},"0\nIns",".\nDel"]
+```
+
+このデータを JSON に変換するには、[QMK KLE-JSON Converter](https://qmk.fm/converter/) に移動し、Raw Data を Input フィールド に貼り付け、Convert ボタンをクリックします。しばらくすると、JSON データが Output フィールドに表示されます。内容を新しいテキストドキュメントにコピーし、ドキュメントに `info.json` という名前を付け、`numpad.h` を含む同じフォルダに保存します。
+
+`keyboard_name` オブジェクトを使ってキーボードの名前を設定します。説明のために、各キーのオブジェクトを各行に配置します。これはファイルを人間が読みやすいものにするためのもので、Configurator の機能には影響しません。
+
+```json
+{
+    "keyboard_name": "Numpad",
+    "url": "",
+    "maintainer": "qmk",
+    "tags": {
+        "form_factor": "numpad"
+    },
+    "width": 4,
+    "height": 5,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"label":"Num Lock", "x":0, "y":0},
+                {"label":"/", "x":1, "y":0},
+                {"label":"*", "x":2, "y":0},
+                {"label":"-", "x":3, "y":0},
+                {"label":"7", "x":0, "y":1},
+                {"label":"8", "x":1, "y":1},
+                {"label":"9", "x":2, "y":1},
+                {"label":"+", "x":3, "y":1, "h":2},
+                {"label":"4", "x":0, "y":2},
+                {"label":"5", "x":1, "y":2},
+                {"label":"6", "x":2, "y":2},
+                {"label":"1", "x":0, "y":3},
+                {"label":"2", "x":1, "y":3},
+                {"label":"3", "x":2, "y":3},
+                {"label":"Enter", "x":3, "y":3, "h":2},
+                {"label":"0", "x":0, "y":4, "w":2},
+                {"label":".", "x":2, "y":4}
+            ]
+        }
+    }
+}
+```
+
+`layouts` オブジェクトにはキーボードの物理レイアウトを表すデータが含まれます。このオブジェクトには `LAYOUT` という名前のオブジェクトがあり、このオブジェクト名は `numpad.h` のレイアウトマクロの名前と一致する必要があります。`LAYOUT` オブジェクト自体には `layout` という名前のオブジェクトがあります。このオブジェクトにはキーボードの物理キーごとに 1つの JSON オブジェクトが以下の形式で含まれています:
+
+```
+  キーの名前。Configurator では表示されません。
+  |
+  |                   キーボードの左端からのキー単位での
+  |                   | キーの X 軸の位置。
+  |                   |
+  |                   |      キーボードの上端(奥側)からのキー単位での
+  |                   |      | キーの Y 軸位置。
+  ↓                   ↓      ↓
+{"label":"Num Lock", "x":0, "y":0},
+```
+
+一部のオブジェクトには、それぞれキーの幅と高さを表す `"w"` 属性キーと `"h"` 属性キーがあります。
+
+?> `info.json` ファイルの詳細については、[`info.json` 形式](ja/reference_info_json.md) を参照してください。
+
+
+## Configurator がキーをプログラムする方法
+
+Configurator の API は、指定されたレイアウトマクロと JSON ファイルを使って、特定のキーに関連付けられた各ビジュアルオブジェクトを順番に持つキーボードのビジュアル表現を作成します:
+
+| レイアウトマクロのキー | 使用される JSON オブジェクト |
+:---: | :----
+| k00 | {"label":"Num Lock", "x":0, "y":0} |
+| k01 | {"label":"/", "x":1, "y":0} |
+| k02 | {"label":"*", "x":2, "y":0} |
+| k03 | {"label":"-", "x":3, "y":0} |
+| k10 | {"label":"7", "x":0, "y":1} |
+| k11 | {"label":"8", "x":1, "y":1} |
+| k12 | {"label":"9", "x":2, "y":1} |
+| k13 | {"label":"+", "x":3, "y":1, "h":2} |
+| k20 | {"label":"4", "x":0, "y":2} |
+| k21 | {"label":"5", "x":1, "y":2} |
+| k22 | {"label":"6", "x":2, "y":2} |
+| k30 | {"label":"1", "x":0, "y":3} |
+| k31 | {"label":"2", "x":1, "y":3} |
+| k32 | {"label":"3", "x":2, "y":3} |
+| k33 | {"label":"Enter", "x":3, "y":3, "h":2} |
+| k40 | {"label":"0", "x":0, "y":4, "w":2} |
+| k42 | {"label":".", "x":2, "y":4} |
+
+ユーザが Configurator で左上のキーを選択し、Num Lock を割り当てると、Configurator は最初のキーとして `KC_NLCK` を持つキーマップを作成し、同様にキーマップが作成されます。`label` キーは使われません; それらは `info.json` ファイルをデバッグする時に特定のキーを識別するためのユーザの参照のためだけのものです。
+
+
+## 問題と危険
+
+現在のところ、Configurator はキーの回転または ISO Enter などの長方形ではないキーをサポートしません。さらに、"行"から垂直方向にずれているキー、&mdash; 顕著な例として [TKC1800](https://github.com/qmk/qmk_firmware/tree/4ac48a61a66206beaf2fdd5f2939d8bbedd0004c/keyboards/tkc1800/) のような1800レイアウト上の矢印キー &mdash; は、 `info.json` ファイルの提供者によって調整されていない場合は、KLE-to-JSON コンバータを混乱させます。
+
+### 回避策
+
+#### 長方形ではないキー
+
+ISO Enter キーについては、QMK custom は幅 1.25u、高さ 2u の長方形のキーとして表示し、右端が英数字キーブロックの右端に揃うように配置されます。
+
+![](https://i.imgur.com/JKngtTw.png)  
+*QMK Configurator によって描画される標準 ISO レイアウトの60%キーボード。*
+
+#### 垂直方向にずれたキー
+
+垂直方向にずれたキーについては、ずれていないかのように KLE で配置し、変換された JSON ファイルで必要に応じて Y 値を編集します。
+
+![](https://i.imgur.com/fmDvDzR.png)  
+*矢印キーに適用される垂直方向のずれのない、Keyboard Layout Editor で描画された1800レイアウトのキーボード。*
+
+![](https://i.imgur.com/8beYMBR.png)  
+*キーボードの JSON ファイルで矢印キーを垂直方向にずらすために必要な変更を示す、Unix の diff ファイル。*

docs/ja/reference_keymap_extras.md

@@ -0,0 +1,88 @@
+# 言語固有のキーコード
+
+<!---
+  original document: 0.9.55:docs/reference_keymap_extras.md
+  git diff 0.9.55 HEAD -- docs/reference_keymap_extras.md | cat
+-->
+
+キーボードは多くの言語をサポートすることができます。ただし、それらはキーを押したことで生成される実際の文字を送信しません - 代わりに数字のコードを送信します。USB HID の仕様ではそれらは "usages" と呼ばれますが、キーボードの文脈では「スキャンコード」あるいは「キーコード」と呼ばれることが多いです。
+HID Keyboard/Keypad usage ページでは 256 未満の usage が定義されており、それらの一部は現在のオペレーティングシステムでは機能しません。では、この言語のサポートはどのようにして実現されるのでしょうか？
+
+簡単に言うと、オペレーティングシステムはユーザが設定したキーボードレイアウトに基づいて受け取った usage を適切な文字にマップします。例えば、スウェーデン人がキーボードの `å` という文字が刻印されたキーを押すと、キーボードは *実際には* `[` のキーコードを送信します。
+
+明らかにこれは混乱する可能性があるため、QMK は多くのキーボードレイアウトのために言語固有のキーコードのエイリアスを提供します。これらはそれだけでは何もしません - さらに OS の設定で対応するキーボードレイアウトを設定する必要があります。それらをキーマップのキーキャップラベルと考えてください。
+
+これらを使うには、`keymap.c` で対応する [ヘッダファイル](https://github.com/qmk/qmk_firmware/tree/master/quantum/keymap_extras) を `#include` し、それらで定義されているキーコードを `KC_` プリフィクスの代わりに追加します:
+
+| レイアウト                  | ヘッダファイル                   |
+|-----------------------------|----------------------------------|
+| Canadian Multilingual (CSA) | `keymap_canadian_multilingual.h` |
+| Croatian                    | `keymap_croatian.h`              |
+| Czech                       | `keymap_czech.h`                 |
+| Danish                      | `keymap_danish.h`                |
+| Dutch (Belgium)             | `keymap_belgian.h`               |
+| English (Ireland)           | `keymap_irish.h`                 |
+| English (UK)                | `keymap_uk.h`                    |
+| English (US International)  | `keymap_us_international.h`      |
+| Estonian                    | `keymap_estonian.h`              |
+| Finnish                     | `keymap_finnish.h`               |
+| French                      | `keymap_french.h`                |
+| French (AFNOR)              | `keymap_french_afnor.h`          |
+| French (BÉPO)               | `keymap_bepo.h`                  |
+| French (Belgium)            | `keymap_belgian.h`               |
+| French (Switzerland)        | `keymap_fr_ch.h`                 |
+| French (macOS, ISO)         | `keymap_french_osx.h`            |
+| German                      | `keymap_german.h`                |
+| German (Switzerland)        | `keymap_german_ch.h`             |
+| German (macOS)              | `keymap_german_osx.h`            |
+| German (Neo2)*              | `keymap_neo2.h`                  |
+| Greek*                      | `keymap_greek.h`                 |
+| Hebrew*                     | `keymap_hebrew.h`                |
+| Hungarian                   | `keymap_hungarian.h`             |
+| Icelandic                   | `keymap_icelandic.h`             |
+| Italian                     | `keymap_italian.h`               |
+| Italian (macOS, ANSI)       | `keymap_italian_osx_ansi.h`      |
+| Italian (macOS, ISO)        | `keymap_italian_osx_iso.h`       |
+| Japanese                    | `keymap_jp.h`                    |
+| Korean                      | `keymap_korean.h`                |
+| Latvian                     | `keymap_latvian.h`               |
+| Lithuanian (ĄŽERTY)         | `keymap_lithuanian_azerty.h`     |
+| Lithuanian (QWERTY)         | `keymap_lithuanian_qwerty.h`     |
+| Norwegian                   | `keymap_norwegian.h`             |
+| Polish                      | `keymap_polish.h`                |
+| Portuguese                  | `keymap_portuguese.h`            |
+| Portuguese (Brazil)         | `keymap_br_abnt2.h`              |
+| Romanian                    | `keymap_romanian.h`              |
+| Russian*                    | `keymap_russian.h`               |
+| Serbian*                    | `keymap_serbian.h`               |
+| Serbian (Latin)             | `keymap_serbian_latin.h`         |
+| Slovak                      | `keymap_slovak.h`                |
+| Slovenian                   | `keymap_slovenian.h`             |
+| Spanish                     | `keymap_spanish.h`               |
+| Spanish (Dvorak)            | `keymap_spanish_dvorak.h`        |
+| Swedish                     | `keymap_swedish.h`               |
+| Turkish (F)                 | `keymap_turkish_f.h`             |
+| Turkish (Q)                 | `keymap_turkish_q.h`             |
+
+言語固有でないものもありますが、QWERTY レイアウトを使っていない場合に役立ちます:
+
+| レイアウト          | ヘッダファイル           |
+|---------------------|--------------------------|
+| Colemak             | `keymap_colemak.h`       |
+| Dvorak              | `keymap_dvorak.h`        |
+| Dvorak (French)     | `keymap_dvorak_fr.h`     |
+| Dvorak (Programmer) | `keymap_dvp.h`           |
+| Norman              | `keymap_norman.h`        |
+| Plover*             | `keymap_plover.h`        |
+| Plover (Dvorak)*    | `keymap_plover_dvorak.h` |
+| Steno*              | `keymap_steno.h`         |
+| Workman             | `keymap_workman.h`       |
+| Workman (ZXCVM)     | `keymap_workman_zxcvm.h` |
+
+## Sendstring サポート
+
+デフォルトでは、`SEND_STRING()` は US ANSI キーボードレイアウトが設定されたと見なします。別のレイアウトを使っている場合は、キーマップで(上記のように)`#include "sendstring_*.h"` して、ASCII 文字をキーコードにマッピングするために使われるルックアップテーブルを上書きすることができます。
+
+ここで注意すべき重要な点は、`SEND_STRING()` は [ASCII 文字](https://en.wikipedia.org/wiki/ASCII#Character_set) でのみ機能するということです。これは、ユニコード文字を含む文字列を渡すことができないことを意味します - 残念ながら、これには希望のレイアウトに存在する可能性のあるアクセント付き文字が含まれています。
+多くのレイアウトでは、Grave または Tilde などの特定の文字を[デッドキー](https://en.wikipedia.org/wiki/Dead_key)としてのみ使えるようにしています。そのため、デッドキーが次の文字と潜在的に結合されることを防ぐためには、送信したい文字列の中のデッドキーのすぐ後にスペースを追加する必要があります。
+ラテン語由来のアルファベットを使わない(例えば、ギリシャ語やロシア語のような)他のレイアウトには、Sendstring ヘッダーがありません。従って ASCII 文字セットのほとんどを入力する方法がありません。これらは上記で `*` でマークされています。

docs/ja/tap_hold.md

@@ -0,0 +1,195 @@
+# タップホールド設定オプション
+
+<!---
+  original document: 0.9.51:docs/tap_hold.md
+  git diff 0.9.51 HEAD -- docs/tap_hold.md | cat
+-->
+
+タップホールドオプションは素晴らしいものですが、問題が無いわけではありません。デフォルト設定を適切なものにしようとしましたが、一部の人にとってまだ問題を引き起こすかもしれません。
+
+次のオプションによりタップホールドキーの挙動を変更することができます。
+
+## タッピング時間
+
+以下の機能の全ての核心は、タッピング時間の設定です。これにより、何をタップとし、何をホールドとするかが決まります。これが自然に感じられるぴったりのタイミングは、キーボードごと、スイッチごと、あるいはキーごとに異ることもありえます。
+
+`config.h` に以下の設定を追加することで、この時間を全体的に設定することができます:
+
+```c
+#define TAPPING_TERM 200
+```
+
+この設定はミリ秒で定義され、デフォルトは 200ms です。これは大多数の人にとっての適切な平均値です。
+
+この機能をより細かく制御するために、以下を `config.h` に追加することができます:
+```c
+#define TAPPING_TERM_PER_KEY
+```
+
+そして、以下の関数をキーマップに追加します:
+
+```c
+uint16_t get_tapping_term(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case SFT_T(KC_SPC):
+            return TAPPING_TERM + 1250;
+        case LT(1, KC_GRV):
+            return 130;
+        default:
+            return TAPPING_TERM;
+    }
+}
+```
+
+
+## 許容ホールド
+
+[PR#1359](https://github.com/qmk/qmk_firmware/pull/1359/) 以降、新しい `config.h` オプションがあります:
+
+```c
+#define PERMISSIVE_HOLD
+```
+
+これは高速なタイピストや高い `TAPPING_TERM` 設定に対して、タップとホールドキー(モッドタップのような)の動作を向上させます。
+
+モッドタップキーを押し、他のキーをタップ(押して放す)して、モッドタップキーを放すという動作の全てをタッピング時間内に行うと、両方のキーの「タッピング」機能が出力されます。
+
+例えば:
+
+- `SFT_T(KC_A)` を押す
+- `KC_X` を押す
+- `KC_X` を放す
+- `SFT_T(KC_A)` を放す
+
+通常、これら全てを `TAPPING_TERM` (デフォルト: 200ms) 内で行うと、ファームウェアとホストシステムによって `ax` として登録されます。許容ホールドを有効にすると、別のキーがタップされた場合にモッドタップキーを修飾キーと見なすように処理を変更し、 `X` (`SHIFT`+`x`)  と登録されます。
+
+?> `モッドタップ割り込みの無視`を有効にしている場合、これにより両方の動きが変更されます。通常のキーには、最初のキーが最初に放された場合、あるいは両方のキーが  `TAPPING_TERM` より長くホールドされた場合に、修飾キーが追加されます。
+
+この機能をより細かく制御するために、以下を `config.h` に追加することができます:
+
+```c
+#define PERMISSIVE_HOLD_PER_KEY
+```
+
+そして、以下の関数をキーマップに追加します:
+
+```c
+bool get_permissive_hold(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case LT(1, KC_BSPC):
+            return true;
+        default:
+            return false;
+    }
+}
+```
+
+## モッドタップ割り込みの無視
+
+この設定を有効にするには、これを `config.h` に追加してください:
+
+```c
+#define IGNORE_MOD_TAP_INTERRUPT
+```
+
+許容ホールドと同様に、これは高速なタイピストのためのファームウェアの処理方法を変更します。モッドタップキーを押し、他のキーを押し、モッドタップキーを放し、通常のキーを放すと、通常は両方のキーの「タッピング」機能が出力されます。これはローリングコンボキーには望ましくないかもしれません。
+
+`モッドタップ割り込みの無視`を設定するには、両方のキーを `TAPPING_TERM` の間ホールドすると、(その修飾キーの)ホールド機能を実行する必要があります。
+
+例えば:
+
+- `SFT_T(KC_A)` を押す
+- `KC_X` を押す
+- `SFT_T(KC_A)` を放す
+- `KC_X` を放す
+
+通常、これは `X` (`SHIFT`+`x`) を送信します。`モッドタップ割り込みの無視` を有効にすると、ホールドアクションを登録するには、両方のキーを `TAPPING_TERM` の間ホールドする必要があります。この場合、素早いタップは `ax` を送信しますが、両方をホールドすると、`X`  (`SHIFT`+`x`) を出力します。
+
+
+?> __注意__: これはモディファイアにのみ関係し、レイヤー切り替えキーには関係しません。
+
+?> `許容ホールド`を有効にすると、これは両方がどのように動作するかを変更します。通常のキーには、最初のキーが最初に放された場合、あるいは両方のキーが  `TAPPING_TERM` より長くホールドされた場合に、修飾キーが追加されます。
+
+この機能をより細かく制御するために、以下を `config.h` に追加することができます:
+
+```c
+#define IGNORE_MOD_TAP_INTERRUPT_PER_KEY
+```
+
+そして、以下の関数をキーマップに追加します:
+
+```c
+bool get_ignore_mod_tap_interrupt(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case SFT_T(KC_SPC):
+            return true;
+        default:
+            return false;
+    }
+}
+```
+
+## タッピング強制ホールド
+
+`タッピング強制ホールド` を有効にするには、以下を `config.h` に追加します:
+
+```c
+#define TAPPING_FORCE_HOLD
+```
+
+タップの後でユーザがキーをホールドすると、これは修飾キーをホールドするかわりにタップされたキーを繰り返します。これにより、タップされたキーのために自動繰り返しを使うことができます。
+
+例:
+
+- SFT_T(KC_A) を押す
+- SFT_T(KC_A) を放す
+- SFT_T(KC_A) を押す
+- タッピング時間より長く待ちます...
+- SFT_T(KC_A) を放す
+
+デフォルトの設定では、最初に放したときに `a` が送信され、2回目の押下で `a` が送信され、コンピュータに自動リピート機能を作動させることができます。
+
+`TAPPING_FORCE_HOLD` を使うと、2回目の押下は Shift として解釈され、それをタップして使った後ですぐに修飾キーとして使うことができます。
+
+!> `TAPPING_FORCE_HOLD` はタッピングトグル(`TT` レイヤーキーコード、ワンショットタッピングトグルなど)を使うものをすべて破壊します。
+
+この機能をより細かく制御するために、以下を `config.h` に追加することができます:
+
+```c
+#define TAPPING_FORCE_HOLD_PER_KEY
+```
+
+そして、以下の関数をキーマップに追加します:
+
+```c
+bool get_tapping_force_hold(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case LT(1, KC_BSPC):
+            return true;
+        default:
+            return false;
+    }
+}
+```
+
+## レトロタッピング
+
+`レトロタッピング`を有効にするには、以下を `config.h` に追加してください:
+
+```c
+#define RETRO_TAPPING
+```
+
+他のキーを押さずにデュアルファンクションキーを押して放しても何も起こりません。レトロタッピングを有効にすると、他のキーを押さずにキーを放すと、元のキーコードがタッピング時間外であっても送信されます。
+
+例えば、他のキーを押すことなく `LT(2, KC_SPACE)` を押したり放したりしても何も起こりません。これを有効にすると、代わりに `KC_SPACE` を送信します。
+
+## キー別の関数にキーレコードを含めるのはなぜですか？
+
+「キー別」の関数全てにキーレコードを含んでいることに気付いたかもしれません。そしてなぜそうしたのか不思議に思っているかもしれません。
+
+まぁ、それは単純に本当にカスタマイズのためです。ただし、具体的には、それはキーボードの配線方法によって異なります。例えば、各行が実際にキーボードのマトリックスの1行を使っている場合、キーコード全体をチェックする代わりに、`if (record->event.row == 3)` を使うほうが簡単かもしれません。これは、ホームキー行でタップホールドタイプのキーを使っている人にとって特に便利です。そのため、通常のタイピングを妨げないように微調整することができるのではないでしょうか。
+
+## `*_kb` や `*_user` 関数が無いのはなぜですか？
+
+QMK にある他の多くの関数とは異なり、quantum あるいはキーボードレベルの関数を持つ必要はありません (または理由さえありません)。ここではユーザレベルの関数だけが有用なため、そのようにマークする必要はありません。

docs/other_vscode.md

@@ -48,7 +48,7 @@ This part is super simple.  However, there is some configuration that we need to
 
 ### Configuring VS Code
 
-First, we need to set up IntelliSense. This isn't strictly required, but it will make your life a LOT easier. To do this, we need to create the `.vscode/c_cpp_properies.json` file in the QMK Firmware folder, You can do this all manually, but I've done most of the work already. 
+First, we need to set up IntelliSense. This isn't strictly required, but it will make your life a LOT easier. To do this, we need to create the `.vscode/c_cpp_properties.json` file in the QMK Firmware folder, You can do this all manually, but I've done most of the work already. 
 
 Grab [this file](https://gist.github.com/drashna/48e2c49ce877be592a1650f91f8473e8) and save it.  You may need to edit this file, if you didn't install MSYS2 to the default location, or are using WSL/LxSS.  
 

docs/pr_checklist.md

@@ -1,39 +1,42 @@
 # PR checklists
 
-This is a non-exhaustive checklist of what the QMK collaborators will be checking when reviewing submitted PRs.
+This is a non-exhaustive checklist of what the QMK Collaborators will be checking when reviewing submitted PRs.
 
-If there are any inconsistencies with these recommendations, you're best off [creating an issue](https://github.com/qmk/qmk_firmware/issues/new) against this document, or getting in touch with a QMK Collaborator on Discord.
+If there are any inconsistencies with these recommendations, you're best off [creating an issue](https://github.com/qmk/qmk_firmware/issues/new) against this document, or getting in touch with a QMK Collaborator on [Discord](https://discord.gg/Uq7gcHh).
 
 ## General PRs
 
 - PR should be submitted using a non-`master` branch on the source repository
-    - This does not mean you target a different branch for your PR, rather that you're not working out of your own master branch
-    - If submitter _does_ use their own `master` branch, they'll be given a link to the ["how to git"](https://docs.qmk.fm/#/newbs_git_using_your_master_branch) page after merging -- (end of this document will contain the contents of the message)
-- Newly-added directories and filenames must be lowercase
-    - This rule may be relaxed if upstream sources originally had uppercase characters (e.g. ChibiOS, or imported files from other repositories etc.)
-    - If there is enough justification (i.e. consistency with existing core files etc.) this can be relaxed
+    - this does not mean you target a different branch for your PR, rather that you're not working out of your own master branch
+    - if submitter _does_ use their own `master` branch, they'll be given a link to the ["how to git"](https://docs.qmk.fm/#/newbs_git_using_your_master_branch) page after merging -- (end of this document will contain the contents of the message)
+- newly-added directories and filenames must be lowercase
+    - this rule may be relaxed if upstream sources originally had uppercase characters (e.g. ChibiOS, or imported files from other repositories etc.)
+    - if there is enough justification (i.e. consistency with existing core files etc.) this can be relaxed
         - a board designer naming their keyboard with uppercase letters is not enough justification
-- Valid license headers on all `*.c` and `*.h` source files
+- valid license headers on all `*.c` and `*.h` source files
     - GPL2/GPL3 recommended for consistency
-    - Other licenses are permitted, however they must be GPL-compatible and must allow for redistribution. Using a different license will almost certainly delay a PR getting merged.
-- QMK codebase "best practices" followed
-    - This is not an exhaustive list, and will likely get amended as time goes by
+    - other licenses are permitted, however they must be GPL-compatible and must allow for redistribution. Using a different license will almost certainly delay a PR getting merged.
+- QMK Codebase "best practices" followed
+    - this is not an exhaustive list, and will likely get amended as time goes by
     - `#pragma once` instead of `#ifndef` include guards in header files
-    - No "old-school" GPIO/I2C/SPI functions used -- must use QMK abstractions unless justifiable (and laziness is not valid justification)
-    - Timing abstractions should be followed too:
+    - no "old-school" GPIO/I2C/SPI functions used -- must use QMK abstractions unless justifiable (and laziness is not valid justification)
+    - timing abstractions should be followed too:
         - `wait_ms()` instead of `_delay_ms()` (remove `#include <util/delay.h>` too)
         - `timer_read()` and `timer_read32()` etc. -- see [timer.h](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/common/timer.h) for the timing APIs
-    - If you think a new abstraction is useful, you're encouraged to:
+    - if you think a new abstraction is useful, you're encouraged to:
         - prototype it in your own keyboard until it's feature-complete
         - discuss it with QMK Collaborators on Discord
         - refactor it as a separate core change
         - remove your specific copy in your board
+- rebase and fix all merge conflicts before opening the PR (in case you need help or advice, reach out to QMK Collaborators on Discord)
 
-## Core PRs
+## Keymap PRs
 
-- Must now target `develop` branch, which will subsequently be merged back to `master` on the breaking changes timeline
-- Other notes TBD
-    - Core is a lot more subjective given the breadth of posted changes
+- `#include QMK_KEYBOARD_H` preferred to including specific board files
+- prefer layer `enum`s to `#define`s
+- require custom keycode `enum`s to `#define`s, first entry must have ` = SAFE_RANGE`
+- terminating backslash (`\`) in lines of LAYOUT macro parameters is superfluous
+- some care with spacing (e.g., alignment on commas or first char of keycodes) makes for a much nicer-looking keymap
 
 ## Keyboard PRs
 
@@ -48,12 +51,14 @@ https://github.com/qmk/qmk_firmware/pulls?q=is%3Apr+is%3Aclosed+label%3Akeyboard
     - standard template should be present
     - flash command has `:flash` at end
     - valid hardware availability link (unless handwired) -- private groupbuys are okay, but one-off prototypes will be questioned. If open-source, a link to files should be provided.
+    - clear instructions on how to reset the board into bootloader mode
+    - a picture about the keyboard and preferably about the PCB, too
 - `rules.mk`
     - removed `MIDI_ENABLE`, `FAUXCLICKY_ENABLE` and `HD44780_ENABLE`
     - modified `# Enable Bluetooth with the Adafruit EZ-Key HID` -> `# Enable Bluetooth`
-    - No `(-/+size)` comments related to enabling features
-    - Remove the list of alternate bootloaders if one has been specified
-    - No re-definitions of the default MCU parameters if same value, when compared to the equivalent MCU in [mcu_selection.mk](https://github.com/qmk/qmk_firmware/blob/master/quantum/mcu_selection.mk)
+    - no `(-/+size)` comments related to enabling features
+    - remove the list of alternate bootloaders if one has been specified
+    - no re-definitions of the default MCU parameters if same value, when compared to the equivalent MCU in [mcu_selection.mk](https://github.com/qmk/qmk_firmware/blob/master/quantum/mcu_selection.mk)
 - keyboard `config.h`
     - don't repeat `MANUFACTURER` in the `PRODUCT` value
     - no `#define DESCRIPTION`
@@ -71,12 +76,12 @@ https://github.com/qmk/qmk_firmware/pulls?q=is%3Apr+is%3Aclosed+label%3Akeyboard
 - `keyboard.h`
     - `#include "quantum.h"` appears at the top
     - `LAYOUT` macros should use standard definitions if applicable
-        - Use the Community Layout macro names where they apply (preferred above `LAYOUT`/`LAYOUT_all`)
+        - use the Community Layout macro names where they apply (preferred above `LAYOUT`/`LAYOUT_all`)
 - keymap `config.h`
     - no duplication of `rules.mk` or `config.h` from keyboard
 - `keymaps/default/keymap.c`
     - `QMKBEST`/`QMKURL` removed (sheesh)
-    - If using `MO(_LOWER)` and `MO(_RAISE)` keycodes or equivalent, and the keymap has an adjust layer when holding both keys -- if the keymap has no "direct-to-adjust" keycode (such as `MO(_ADJUST)`) then you should prefer to write...
+    - if using `MO(_LOWER)` and `MO(_RAISE)` keycodes or equivalent, and the keymap has an adjust layer when holding both keys -- if the keymap has no "direct-to-adjust" keycode (such as `MO(_ADJUST)`) then you should prefer to write...
         ```
         layer_state_t layer_state_set_user(layer_state_t state) {
           return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
@@ -90,22 +95,20 @@ https://github.com/qmk/qmk_firmware/pulls?q=is%3Apr+is%3Aclosed+label%3Akeyboard
 - submitters can also have a "manufacturer-matching" keymap that mirrors existing functionality of the commercial product, if porting an existing board
 
 Also, specific to ChibiOS:
-- **Strong** preference to using existing ChibiOS board definitions.
-    - A lot of the time, an equivalent Nucleo board can be used with a different flash size or slightly different model in the same family
-        - Example: For an STM32L082KZ, given the similarity to an STM32L073RZ, you can use `BOARD = ST_NUCLEO64_L073RZ` in rules.mk
+- **strong** preference to using existing ChibiOS board definitions.
+    - a lot of the time, an equivalent Nucleo board can be used with a different flash size or slightly different model in the same family
+        - example: For an STM32L082KZ, given the similarity to an STM32L073RZ, you can use `BOARD = ST_NUCLEO64_L073RZ` in rules.mk
     - QMK is migrating to not having custom board definitions if at all possible, due to the ongoing maintenance burden when upgrading ChibiOS
-- If a board definition is unavoidable, `board.c` must have a standard `__early_init()` (as per normal ChibiOS board defs) and an empty `boardInit()`:
+- if a board definition is unavoidable, `board.c` must have a standard `__early_init()` (as per normal ChibiOS board defs) and an empty `boardInit()`:
     - see Arm/ChibiOS [early initialization](https://docs.qmk.fm/#/platformdev_chibios_earlyinit?id=board-init)
     - `__early_init()` should be replaced by either `early_hardware_init_pre()` or `early_hardware_init_post()` as appropriate
     - `boardInit()` should be migrated to `board_init()`
 
-## Keymap PRs
+## Core PRs
 
-- `#include QMK_KEYBOARD_H` preferred to including specific board files
-- Prefer layer `enum`s to `#define`s
-- Require custom keycode `enum`s to `#define`s, first entry must have ` = SAFE_RANGE`
-- Terminating backslash (`\`) in lines of LAYOUT macro parameters is superfluous
-- Some care with spacing (e.g., alignment on commas or first char of keycodes) makes for a much nicer-looking keymap
+- must now target `develop` branch, which will subsequently be merged back to `master` on the breaking changes timeline
+- other notes TBD
+    - core is a lot more subjective given the breadth of posted changes
 
 ---
 

drivers/avr/ssd1306.c

@@ -11,6 +11,8 @@
 #    include "sendchar.h"
 #    include "timer.h"
 
+struct CharacterMatrix display;
+
 // Set this to 1 to help diagnose early startup problems
 // when testing power-on with ble.  Turn it off otherwise,
 // as the latency of printing most of the debug info messes

drivers/avr/ssd1306.h

@@ -66,7 +66,7 @@ struct CharacterMatrix {
     bool     dirty;
 };
 
-struct CharacterMatrix display;
+extern struct CharacterMatrix display;
 
 bool iota_gfx_init(void);
 void iota_gfx_task(void);

keyboards/1upkeyboards/1up60hte/keymaps/badger/keymap.c

@@ -0,0 +1,59 @@
+/*
+Copyright 2020 Dan White <opensource@bluetufa.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "badger.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QWERTY_MAC]  = LAYOUT_tsangan(\
+     KC_GRV,     KC_1,     KC_2,     KC_3,     KC_4,     KC_5,     KC_6,     KC_7,     KC_8,     KC_9,     KC_0,     KC_MINS,   KC_EQL,   KC_BSPC, KC_DEL, \
+     KC_TAB,     KC_Q,     KC_W,     KC_E,     KC_R,     KC_T,     KC_Y,     KC_U,     KC_I,     KC_O,     KC_P,     KC_LBRC,   KC_RBRC,  KC_BSLS, \
+     MOVE_MAC,   KC_A,     KC_S,     KC_D,     KC_F,     KC_G,     KC_H,     KC_J,     KC_K,     KC_L,     KC_SCLN,  KC_QUOT,   KC_ENT,   \
+     KC_LSFT,    KC_Z,     KC_X,     KC_C,     KC_V,     KC_B,     KC_N,     KC_M,     KC_COMM,  KC_DOT,   KC_SLSH,  KC_RSFT,   CFG_MAC, \
+     KC_LCTL,    KC_LALT,  KC_LGUI,  KC_SPC,   ADJUST,   KC_RALT,  KC_RGUI),
+
+  [_MOVE_MAC]    = LAYOUT_tsangan(\
+     MAC_FRC,    MM_LEFT,  MM_RGHT,  KC_HASH,  KC_DLR,   KC_PERC,  KC_CIRC,  KC_AMPR,  KC_ASTR,  KC_LPRN,  KC_0,     IJ_TOP,    IJ_BOTT,  _______, _______, \
+     KC_BACK,    IJ_STEP,  IJ_INTO,  IJ_OUT,   IJ_RUN,   IJ_STOP,  _______,  WD_BACK,  KC_HOME,  KC_END,   WD_FRWD,  IJ_BACK,   IJ_FWD,   KC_NEXT, \
+     _______,    MM_LH,    MM_MAX,   MM_RH,    IJ_FIND,  IJ_IMPS,  KC_LEFT,  KC_DOWN,  KC_UP,    KC_RGHT,  CM_RIGHT, CM_DOWN,   _______,  \
+     _______,    MM_UH,    MM_BH,    MAC_CPY,  MAC_PST,  IJ_IMPH,  _______,  IJ_REN,   IJ_IMPL,  IJ_DECL,  IJ_USAG,  _______,   _______,  \
+     _______,    _______,  _______,  _______,  _______,  _______,  _______),
+
+  [_QWERTY_LINUX] = LAYOUT_tsangan(\
+     KC_GRV,     KC_1,     KC_2,     KC_3,     KC_4,     KC_5,     KC_6,     KC_7,     KC_8,     KC_9,     KC_0,     KC_MINS,   KC_EQL,   KC_BSPC, KC_DEL, \
+     KC_TAB,     KC_Q,     KC_W,     KC_E,     KC_R,     KC_T,     KC_Y,     KC_U,     KC_I,     KC_O,     KC_P,     KC_LBRC,   KC_RBRC,  KC_BSLS, \
+     MOVE,       KC_A,     KC_S,     KC_D,     KC_F,     KC_G,     KC_H,     KC_J,     KC_K,     KC_L,     KC_SCLN,  KC_QUOT,   KC_ENT,   \
+     KC_LSFT,    KC_Z,     KC_X,     KC_C,     KC_V,     KC_B,     KC_N,     KC_M,     KC_COMM,  KC_DOT,   KC_SLSH,  KC_RSFT,   CFG_LNX, \
+     KC_LCTL,    KC_LGUI,  KC_LALT,  KC_SPC,   ADJUST,   KC_RALT,  KC_RGUI),
+
+  [_MOVE_LINUX] = LAYOUT_tsangan(\
+     KC_GRV,     VD_1,     VD_2,     KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,    KC_F12,   _______, _______, \
+     KC_BACK,    WM_VD1,   WM_UH,    WM_VD2,   RESET,    KC_MSTP,  KC_MPLY,  KC_PGUP,  KC_HOME,  KC_END,   KC_PGDN,  _______,   _______,  KC_NEXT, \
+     _______,    WM_LH,    WM_MAX,   WM_RH,    WD_FRWD,  _______,  KC_LEFT,  KC_DOWN,  KC_UP,    KC_RGHT,  CS_RIGHT, CS_DOWN,   _______, \
+     _______,    WM_VD3,   WM_BH,    OS_COPY,  OS_PAST,  WD_BACK,  KC_MNXT,  KC_MUTE,  KC_WBAK,  KC_WFWD,  _______,  _______,   _______, \
+     _______,    _______,  _______,  _______,  _______,  _______,  _______),
+
+  [_ADJUST]     = LAYOUT_tsangan(\
+     KC_ESC,    KC_F1,    KC_F2,    KC_F3,    KC_F4,     KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,    KC_F12,   _______, _______, \
+     _______,   _______,  _______,  _______,  KC_WREF,   KC_MSTP,  KC_MPLY,  KC_PGUP,  _______,  _______,  KC_PGDN,  KC_VOLD,   KC_VOLU,  KC_INS, \
+     _______,   _______,  _______,  _______,  _______,   _______,  _______,  _______,  _______,  _______,  _______,  _______,   _______,  \
+     _______,   _______,  _______,  KC_CAPS,  _______,   KC_MPRV,  KC_MNXT,  KC_MUTE,  KC_WBAK,  KC_WFWD,  KC_WSCH,  _______,   _______,  \
+     _______,   _______,  _______,  _______,  _______,   _______,  _______),
+
+  [_CONFIG]     = LAYOUT_tsangan(\
+     _______,   KC_F1,    KC_F2,    KC_F3,    KC_F4,     KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,    KC_F12,   _______, _______, \
+     _______,   NK_ON,    NK_OFF,   EEP_RST,  RESET,     _______,  _______,  _______,  _______,  _______,  _______,  _______,   _______,  KC_INS, \
+     _______,   GE_SWAP,  GE_NORM,  DEBUG,    RGB_MOD,   RGB_HUI,  RGB_SAI,  RGB_SPI,  RGB_M_B,  _______,  _______,  RGB_TOG,   _______,  \
+     _______,   DF_1,     DF_2,     _______,  RGB_RMOD,  RGB_HUD,  RGB_SAD,  RGB_SPD,  RGB_M_K,  _______,  _______,  _______,   _______,  \
+     _______,   _______,  _______,  _______,  _______,   _______,  _______)
+};

keyboards/1upkeyboards/1up60rgb/1up60rgb.h

@@ -33,6 +33,21 @@
     { k40, k41, XXX, k43, XXX, XXX, k46, XXX, XXX, XXX, k4A, k4B, XXX, k4D, k4E } \
 }
 
+/* ANSI-Tsangan variant, with split right shift key */
+#define LAYOUT_60_ansi_tsangan_split_rshift( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C,      k2E, \
+    k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B,      k3D, k3E, \
+    k40, k41,      k43,           k46,                     k4B,      k4D, k4E \
+) { \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0D }, \
+    { k10, XXX, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \
+    { k20, XXX, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2E, XXX }, \
+    { k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, XXX, k3D, k3E }, \
+    { k40, k41, XXX, k43, XXX, XXX, k46, XXX, XXX, XXX, XXX, k4B, XXX, k4D, k4E } \
+}
+
 /* ISO variant. Remove useless ANSI keys */
 #define LAYOUT_60_iso( \
     k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, \
@@ -63,6 +78,21 @@
     { k40, k41, XXX, k43, XXX, XXX, k46, XXX, XXX, XXX, k4A, k4B, XXX, k4D, k4E } \
 }
 
+/* ANSI Variant */
+#define LAYOUT_60_ansi_split_rshift( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C,      k2E, \
+    k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B,      k3D, k3E, \
+    k40, k41,      k43,           k46,                k4A, k4B,      k4D, k4E  \
+) { \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0D }, \
+    { k10, XXX, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \
+    { k20, XXX, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2E, XXX }, \
+    { k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, XXX, k3D, k3E }, \
+    { k40, k41, XXX, k43, XXX, XXX, k46, XXX, XXX, XXX, k4A, k4B, XXX, k4D, k4E } \
+}
+
 /* HHKB Variant */
 #define LAYOUT_60_hhkb( \
     k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \

keyboards/1upkeyboards/1up60rgb/info.json

@@ -6,22 +6,68 @@
   "height": 5,
   "layouts": {
     "LAYOUT_all": {
-      "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"~", "x":13, "y":0}, {"label":"Del", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":2, "w":1.25}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+      "layout": [
+        {"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"~", "x":13, "y":0}, {"label":"Del", "x":14, "y":0}, 
+        {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, 
+        {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":2, "w":1.25}, 
+        {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, 
+        {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
     },
 
     "LAYOUT_60_ansi": {
-      "layout": [{"x":0, "y":0, "label":"~"}, {"x":1, "y":0, "label":"!"}, {"x":2, "y":0, "label":"@"}, {"x":3, "y":0, "label":"#"}, {"x":4, "y":0, "label":"$"}, {"x":5, "y":0, "label":"%"}, {"x":6, "y":0, "label":"^"}, {"x":7, "y":0, "label":"&"}, {"x":8, "y":0, "label":"*"}, {"x":9, "y":0, "label":"("}, {"x":10, "y":0, "label":")"}, {"x":11, "y":0, "label":"_"}, {"x":12, "y":0, "label":"+"}, {"x":13, "y":0, "label":"Backspace", "w":2}, {"x":0, "y":1, "label":"Tab", "w":1.5}, {"x":1.5, "y":1, "label":"Q"}, {"x":2.5, "y":1, "label":"W"}, {"x":3.5, "y":1, "label":"E"}, {"x":4.5, "y":1, "label":"R"}, {"x":5.5, "y":1, "label":"T"}, {"x":6.5, "y":1, "label":"Y"}, {"x":7.5, "y":1, "label":"U"}, {"x":8.5, "y":1, "label":"I"}, {"x":9.5, "y":1, "label":"O"}, {"x":10.5, "y":1, "label":"P"}, {"x":11.5, "y":1, "label":"{"}, {"x":12.5, "y":1, "label":"}"}, {"x":13.5, "y":1, "label":"|", "w":1.5}, {"x":0, "y":2, "label":"Caps Lock", "w":1.75}, {"x":1.75, "y":2, "label":"A"}, {"x":2.75, "y":2, "label":"S"}, {"x":3.75, "y":2, "label":"D"}, {"x":4.75, "y":2, "label":"F"}, {"x":5.75, "y":2, "label":"G"}, {"x":6.75, "y":2, "label":"H"}, {"x":7.75, "y":2, "label":"J"}, {"x":8.75, "y":2, "label":"K"}, {"x":9.75, "y":2, "label":"L"}, {"x":10.75, "y":2, "label":":"}, {"x":11.75, "y":2, "label":"\""}, {"x":12.75, "y":2, "label":"Enter", "w":2.25}, {"x":0, "y":3, "label":"Shift", "w":2.25}, {"x":2.25, "y":3, "label":"Z"}, {"x":3.25, "y":3, "label":"X"}, {"x":4.25, "y":3, "label":"C"}, {"x":5.25, "y":3, "label":"V"}, {"x":6.25, "y":3, "label":"B"}, {"x":7.25, "y":3, "label":"N"}, {"x":8.25, "y":3, "label":"M"}, {"x":9.25, "y":3, "label":"<"}, {"x":10.25, "y":3, "label":">"}, {"x":11.25, "y":3, "label":"?"}, {"x":12.25, "y":3, "label":"Shift", "w":2.75}, {"x":0, "y":4, "label":"Ctrl", "w":1.25}, {"x":1.25, "y":4, "label":"Win", "w":1.25}, {"x":2.5, "y":4, "label":"Alt", "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "label":"Alt", "w":1.25}, {"x":11.25, "y":4, "label":"Win", "w":1.25}, {"x":12.5, "y":4, "label":"Menu", "w":1.25}, {"x":13.75, "y":4, "label":"Ctrl", "w":1.25}]
+      "layout": [
+        {"x":0, "y":0, "label":"~"}, {"x":1, "y":0, "label":"!"}, {"x":2, "y":0, "label":"@"}, {"x":3, "y":0, "label":"#"}, {"x":4, "y":0, "label":"$"}, {"x":5, "y":0, "label":"%"}, {"x":6, "y":0, "label":"^"}, {"x":7, "y":0, "label":"&"}, {"x":8, "y":0, "label":"*"}, {"x":9, "y":0, "label":"("}, {"x":10, "y":0, "label":")"}, {"x":11, "y":0, "label":"_"}, {"x":12, "y":0, "label":"+"}, {"x":13, "y":0, "label":"Backspace", "w":2}, 
+        {"x":0, "y":1, "label":"Tab", "w":1.5}, {"x":1.5, "y":1, "label":"Q"}, {"x":2.5, "y":1, "label":"W"}, {"x":3.5, "y":1, "label":"E"}, {"x":4.5, "y":1, "label":"R"}, {"x":5.5, "y":1, "label":"T"}, {"x":6.5, "y":1, "label":"Y"}, {"x":7.5, "y":1, "label":"U"}, {"x":8.5, "y":1, "label":"I"}, {"x":9.5, "y":1, "label":"O"}, {"x":10.5, "y":1, "label":"P"}, {"x":11.5, "y":1, "label":"{"}, {"x":12.5, "y":1, "label":"}"}, {"x":13.5, "y":1, "label":"|", "w":1.5}, 
+        {"x":0, "y":2, "label":"Caps Lock", "w":1.75}, {"x":1.75, "y":2, "label":"A"}, {"x":2.75, "y":2, "label":"S"}, {"x":3.75, "y":2, "label":"D"}, {"x":4.75, "y":2, "label":"F"}, {"x":5.75, "y":2, "label":"G"}, {"x":6.75, "y":2, "label":"H"}, {"x":7.75, "y":2, "label":"J"}, {"x":8.75, "y":2, "label":"K"}, {"x":9.75, "y":2, "label":"L"}, {"x":10.75, "y":2, "label":":"}, {"x":11.75, "y":2, "label":"\""}, {"x":12.75, "y":2, "label":"Enter", "w":2.25}, 
+        {"x":0, "y":3, "label":"Shift", "w":2.25}, {"x":2.25, "y":3, "label":"Z"}, {"x":3.25, "y":3, "label":"X"}, {"x":4.25, "y":3, "label":"C"}, {"x":5.25, "y":3, "label":"V"}, {"x":6.25, "y":3, "label":"B"}, {"x":7.25, "y":3, "label":"N"}, {"x":8.25, "y":3, "label":"M"}, {"x":9.25, "y":3, "label":"<"}, {"x":10.25, "y":3, "label":">"}, {"x":11.25, "y":3, "label":"?"}, {"x":12.25, "y":3, "label":"Shift", "w":2.75}, 
+        {"x":0, "y":4, "label":"Ctrl", "w":1.25}, {"x":1.25, "y":4, "label":"Win", "w":1.25}, {"x":2.5, "y":4, "label":"Alt", "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "label":"Alt", "w":1.25}, {"x":11.25, "y":4, "label":"Win", "w":1.25}, {"x":12.5, "y":4, "label":"Menu", "w":1.25}, {"x":13.75, "y":4, "label":"Ctrl", "w":1.25}]
     },
 
     "LAYOUT_60_iso": {
-      "layout": [{"label":"\u00ac", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"\u00a3", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"@", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"AltGr", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+      "layout": [
+        {"label":"\u00ac", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"\u00a3", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, 
+        {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, 
+        {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"@", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, 
+        {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, 
+        {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"AltGr", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
     },
 
     "LAYOUT_60_ansi_split_bs_rshift": {
-      "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":6}, {"label":"Alt", "x":10, "y":4, "w":1.5}, {"label":"Win", "x":11.5, "y":4}, {"label":"Menu", "x":12.5, "y":4}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}]
+      "layout": [
+        {"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, 
+        {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, 
+        {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, 
+        {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, 
+        {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":6}, {"label":"Alt", "x":10, "y":4, "w":1.5}, {"label":"Win", "x":11.5, "y":4}, {"label":"Menu", "x":12.5, "y":4}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}]
     },
+
+    "LAYOUT_60_ansi_split_rshift": {
+      "layout": [
+        {"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0, "w":2}, 
+        {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, 
+        {"label":"Esc", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, 
+        {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, 
+        {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Alt", "x":1.25, "y":4, "w": 1.25}, {"label":"Gui", "x":2.5, "y":4, "w":1.25}, {"label": "Space", "x":3.75, "y":4, "w":6.25}, {"label":"Fn", "x":10, "y":4, "w":1.25}, {"label":"Gui", "x":11.25, "y":4, "w": 1.25}, {"label":"Alt", "x":12.5, "y":4, "w": 1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}
+      ]
+    },
+
+    "LAYOUT_60_ansi_tsangan_split_rshift": {
+      "layout": [
+        {"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label": "Bksp", "x":13, "y":0, "w":2}, 
+        {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, 
+        {"label":"Esc", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, 
+        {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label": "Alt Gr", "x":14, "y":3}, 
+        {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Alt", "x":1.5, "y":4}, {"label":"GUI", "x":2.5, "y":4, "w":1.5}, {"label":"space", "x":4, "y":4, "w":7}, {"label":"Fn", "x":11, "y":4, "w":1.5}, {"label":"Alt", "x":12.5, "y":4}, {"label":"GUI", "x":13.5, "y":4, "w": 1.5}
+      ]
+    },
+
     "LAYOUT_60_hhkb": {
-      "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Delete", "x":13.5, "y":1, "w":1.5}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Os", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Os", "x":12.5, "y":4}]
+      "layout": [
+        {"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, 
+        {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Delete", "x":13.5, "y":1, "w":1.5}, 
+        {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, 
+        {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, 
+        {"label":"Os", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Os", "x":12.5, "y":4}]
     }
   }
 }

keyboards/1upkeyboards/1up60rgb/keymaps/badger/keymap.c

@@ -0,0 +1,59 @@
+/*
+Copyright 2020 Dan White <opensource@bluetufa.com>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "badger.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QWERTY_MAC]  = LAYOUT_60_ansi_tsangan_split_rshift(\
+     KC_GRV,     KC_1,     KC_2,     KC_3,     KC_4,     KC_5,     KC_6,     KC_7,     KC_8,     KC_9,     KC_0,     KC_MINS,   KC_EQL,   KC_BSPC, \
+     KC_TAB,     KC_Q,     KC_W,     KC_E,     KC_R,     KC_T,     KC_Y,     KC_U,     KC_I,     KC_O,     KC_P,     KC_LBRC,   KC_RBRC,  KC_BSLS, \
+     MOVE_MAC,   KC_A,     KC_S,     KC_D,     KC_F,     KC_G,     KC_H,     KC_J,     KC_K,     KC_L,     KC_SCLN,  KC_QUOT,   KC_ENT,   \
+     KC_LSFT,    KC_Z,     KC_X,     KC_C,     KC_V,     KC_B,     KC_N,     KC_M,     KC_COMM,  KC_DOT,   KC_SLSH,  KC_RSFT,   CFG_MAC,  \
+     KC_LCTL,    KC_LALT,  KC_LGUI,  KC_SPC,   ADJUST,   KC_RALT,  KC_RGUI),
+
+  [_MOVE_MAC]   = LAYOUT_60_ansi_tsangan_split_rshift(\
+     MAC_FRC,    MM_LEFT,  MM_RGHT,  KC_HASH,  KC_DLR,   KC_PERC,  KC_CIRC,  KC_AMPR,  KC_ASTR,  KC_LPRN,  KC_0,     IJ_TOP,    IJ_BOTT,  KC_DEL, \
+     KC_BACK,    IJ_STEP,  IJ_INTO,  IJ_OUT,   IJ_RUN,   IJ_STOP,  _______,  WD_BACK,  KC_HOME,  KC_END,   WD_FRWD,  IJ_BACK,   IJ_FWD,   KC_NEXT, \
+     _______,    MM_LH,    MM_MAX,   MM_RH,    IJ_FIND,  IJ_IMPS,  KC_LEFT,  KC_DOWN,  KC_UP,    KC_RGHT,  CM_RIGHT, CM_DOWN,   _______,  \
+     _______,    MM_UH,    MM_BH,    MAC_CPY,  MAC_PST,  IJ_IMPH,  _______,  IJ_REN,   IJ_IMPL,  IJ_DECL,  IJ_USAG,  _______,   _______,  \
+     _______,    _______,  _______,  _______,  _______,  _______,  _______),
+     
+  [_QWERTY_LINUX] = LAYOUT_60_ansi_tsangan_split_rshift(\
+     KC_GRV,     KC_1,     KC_2,     KC_3,     KC_4,     KC_5,     KC_6,     KC_7,     KC_8,     KC_9,     KC_0,     KC_MINS,   KC_EQL,   KC_BSPC, \
+     KC_TAB,     KC_Q,     KC_W,     KC_E,     KC_R,     KC_T,     KC_Y,     KC_U,     KC_I,     KC_O,     KC_P,     KC_LBRC,   KC_RBRC,  KC_BSLS, \
+     MOVE,       KC_A,     KC_S,     KC_D,     KC_F,     KC_G,     KC_H,     KC_J,     KC_K,     KC_L,     KC_SCLN,  KC_QUOT,   KC_ENT,   \
+     KC_LSFT,    KC_Z,     KC_X,     KC_C,     KC_V,     KC_B,     KC_N,     KC_M,     KC_COMM,  KC_DOT,   KC_SLSH,  KC_RSFT,   CFG_LNX,  \
+     KC_LCTL,    KC_LGUI,  KC_LALT,  KC_SPC,   ADJUST,   KC_LALT,  KC_RGUI),
+
+  [_MOVE_LINUX]  = LAYOUT_60_ansi_tsangan_split_rshift(\
+     KC_GRV,     VD_1,     VD_2,     VD_3,     KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,    KC_F12,   KC_DEL, \
+     KC_BACK,    WM_VD1,   WM_UH,    WM_VD2,   RESET,    KC_MSTP,  KC_MPLY,  KC_PGUP,  KC_HOME,  KC_END,   KC_PGDN,  _______,   _______,  KC_NEXT, \
+     _______,    WM_LH,    WM_MAX,   WM_RH,    WD_FRWD,  _______,  KC_LEFT,  KC_DOWN,  KC_UP,    KC_RGHT,  CS_RIGHT, CS_DOWN,   _______, \
+     _______,    WM_VD3,   WM_BH,    OS_COPY,  OS_PAST,  WD_BACK,  KC_MNXT,  KC_MUTE,  KC_WBAK,  KC_WFWD,  _______,  _______,   _______, \
+     _______,    _______,  _______,  _______,  _______,  _______,  _______),
+
+  [_ADJUST]     = LAYOUT_60_ansi_tsangan_split_rshift(\
+     KC_ESC,    KC_F1,    KC_F2,    KC_F3,    KC_F4,     KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,    KC_F12,   KC_DEL, \
+     _______,   _______,  _______,  _______,  KC_WREF,   KC_MSTP,  KC_MPLY,  KC_PGUP,  _______,  _______,  KC_PGDN,  KC_VOLD,   KC_VOLU,  KC_INS, \
+     _______,   _______,  _______,  _______,  _______,   _______,  _______,  _______,  _______,  _______,  _______,  _______,   _______,  \
+     _______,   DF_1,     DF_2,     KC_CAPS,  _______,   KC_MPRV,  KC_MNXT,  KC_MUTE,  KC_WBAK,  KC_WFWD,  KC_WSCH,  _______,   _______,  \
+     _______,   _______,  _______,  _______,  _______,   _______,  _______),
+
+  [_CONFIG]     = LAYOUT_60_ansi_tsangan_split_rshift(\
+     _______,   KC_F1,    KC_F2,    KC_F3,    KC_F4,     KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,    KC_F12,   KC_DEL, \
+     _______,   NK_ON,    NK_OFF,   EEP_RST,  RESET,     _______,  _______,  _______,  _______,  _______,  _______,  _______,   _______,  KC_INS, \
+     _______,   GE_SWAP,  GE_NORM,  DEBUG,    RGB_MOD,   RGB_HUI,  RGB_SAI,  RGB_SPI,  RGB_M_B,  _______,  _______,  RGB_TOG,   _______,  \
+     _______,   LAG_SWP,  LAG_NRM,  _______,  RGB_RMOD,  RGB_HUD,  RGB_SAD,  RGB_SPD,  RGB_M_K,  _______,  _______,  _______,   _______, \
+     _______,   _______,  _______,  _______,  _______,   _______,  _______)
+};
+

keyboards/1upkeyboards/super16/keymaps/via/rules.mk

@@ -1,2 +1,4 @@
 VIA_ENABLE = yes
 LTO_ENABLE = yes
+RGB_MATRIX_ENABLE = no
+RGBLIGHT_ENABLE = yes

keyboards/bakeneko65/bakeneko65.c

@@ -0,0 +1,17 @@
+/* Copyright 2020 Koichi Katano
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "bakeneko65.h"

keyboards/bakeneko65/bakeneko65.h

@@ -0,0 +1,75 @@
+/* Copyright 2020 Koichi Katano
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_65_ansi_split_bs( \
+    k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, k013, k014, k015, \
+    k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112,       k113, k115, \
+    k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211,             k213, k215, \
+    k300,       k302, k303, k304, k305, k306, k307, k308, k309, k310, k311,       k312, k313, k315, \
+    k400, k401, k402,                   k406,                   k409, k410, k411, k412, k413, k415  \
+) { \
+    { k000,  k001,  k002,  k003,  k004,  k005,  k006,  k007,  k008,  k009,  k010,  k011,  k012,  k013,  k014,  k015 }, \
+    { k100,  k101,  k102,  k103,  k104,  k105,  k106,  k107,  k108,  k109,  k110,  k111,  k112,  k113,  KC_NO, k115 }, \
+    { k200,  k201,  k202,  k203,  k204,  k205,  k206,  k207,  k208,  k209,  k210,  k211,  KC_NO, k213,  KC_NO, k215 }, \
+    { k300,  KC_NO, k302,  k303,  k304,  k305,  k306,  k307,  k308,  k309,  k310,  k311,  k312,  k313,  KC_NO, k315 }, \
+    { k400,  k401,  k402,  KC_NO, KC_NO, KC_NO, k406,  KC_NO, KC_NO, k409,  k410,  k411,  k412,  k413,  KC_NO, k415 }  \
+}
+
+#define LAYOUT_65_ansi( \
+    k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012,       k014, k015, \
+    k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112,       k113, k115, \
+    k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211,             k213, k215, \
+    k300,       k302, k303, k304, k305, k306, k307, k308, k309, k310, k311,       k312, k313, k315, \
+    k400, k401, k402,                   k406,                   k409, k410, k411, k412, k413, k415  \
+) { \
+    { k000,  k001,  k002,  k003,  k004,  k005,  k006,  k007,  k008,  k009,  k010,  k011,  k012,  KC_NO, k014,  k015 }, \
+    { k100,  k101,  k102,  k103,  k104,  k105,  k106,  k107,  k108,  k109,  k110,  k111,  k112,  k113,  KC_NO, k115 }, \
+    { k200,  k201,  k202,  k203,  k204,  k205,  k206,  k207,  k208,  k209,  k210,  k211,  KC_NO, k213,  KC_NO, k215 }, \
+    { k300,  KC_NO, k302,  k303,  k304,  k305,  k306,  k307,  k308,  k309,  k310,  k311,  k312,  k313,  KC_NO, k315 }, \
+    { k400,  k401,  k402,  KC_NO, KC_NO, KC_NO, k406,  KC_NO, KC_NO, k409,  k410,  k411,  k412,  k413,  KC_NO, k415 }  \
+}
+
+#define LAYOUT_65_ansi_split_bs_2_right_mods( \
+    k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, k013, k014, k015, \
+    k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112,       k113, k115, \
+    k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211,             k213, k215, \
+    k300,       k302, k303, k304, k305, k306, k307, k308, k309, k310, k311,       k312, k313, k315, \
+    k400, k401, k402,                   k406,                   k409,       k411, k412, k413, k415  \
+) { \
+    { k000,  k001,  k002,  k003,  k004,  k005,  k006,  k007,  k008,  k009,  k010,  k011,  k012,  k013,  k014,  k015 }, \
+    { k100,  k101,  k102,  k103,  k104,  k105,  k106,  k107,  k108,  k109,  k110,  k111,  k112,  k113,  KC_NO, k115 }, \
+    { k200,  k201,  k202,  k203,  k204,  k205,  k206,  k207,  k208,  k209,  k210,  k211,  KC_NO, k213,  KC_NO, k215 }, \
+    { k300,  KC_NO, k302,  k303,  k304,  k305,  k306,  k307,  k308,  k309,  k310,  k311,  k312,  k313,  KC_NO, k315 }, \
+    { k400,  k401,  k402,  KC_NO, KC_NO, KC_NO, k406,  KC_NO, KC_NO, k409,  KC_NO, k411,  k412,  k413,  KC_NO, k415 }  \
+}
+
+#define LAYOUT_65_ansi_2_right_mods( \
+    k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012,       k014, k015, \
+    k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112,       k113, k115, \
+    k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211,             k213, k215, \
+    k300,       k302, k303, k304, k305, k306, k307, k308, k309, k310, k311,       k312, k313, k315, \
+    k400, k401, k402,                   k406,                   k409,       k411, k412, k413, k415  \
+) { \
+    { k000,  k001,  k002,  k003,  k004,  k005,  k006,  k007,  k008,  k009,  k010,  k011,  k012,  KC_NO, k014,  k015 }, \
+    { k100,  k101,  k102,  k103,  k104,  k105,  k106,  k107,  k108,  k109,  k110,  k111,  k112,  k113,  KC_NO, k115 }, \
+    { k200,  k201,  k202,  k203,  k204,  k205,  k206,  k207,  k208,  k209,  k210,  k211,  KC_NO, k213,  KC_NO, k215 }, \
+    { k300,  KC_NO, k302,  k303,  k304,  k305,  k306,  k307,  k308,  k309,  k310,  k311,  k312,  k313,  KC_NO, k315 }, \
+    { k400,  k401,  k402,  KC_NO, KC_NO, KC_NO, k406,  KC_NO, KC_NO, k409,  KC_NO, k411,  k412,  k413,  KC_NO, k415 }  \
+}

keyboards/bakeneko65/config.h

@@ -0,0 +1,109 @@
+/*
+Copyright 2020 Koichi Katano
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0x3A0E
+#define PRODUCT_ID   0x4C82
+#define DEVICE_VER   0x0001
+#define MANUFACTURER kkatano
+#define PRODUCT      Bakeneko 65
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 16
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { E6, B7, F7, F4, F5 }
+#define MATRIX_COL_PINS { F6, B0, F1, C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, D1, D0 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+//#define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+//#define BOOTMAGIC_LITE_ROW 0
+//#define BOOTMAGIC_LITE_COLUMN 0

keyboards/bakeneko65/info.json

@@ -0,0 +1,313 @@
+{
+    "keyboard_name": "Bakeneko 65",
+    "url": "https://github.com/kkatano/bakeneko-65-pcb",
+    "maintainer": "kkatano",
+    "width": 16,
+    "height": 5,
+    "layouts": {
+        "LAYOUT_65_ansi_split_bs": {
+            "layout": [
+                { "x":0, "y":0 },
+                { "x":1, "y":0 },
+                { "x":2, "y":0 },
+                { "x":3, "y":0 },
+                { "x":4, "y":0 },
+                { "x":5, "y":0 },
+                { "x":6, "y":0 },
+                { "x":7, "y":0 },
+                { "x":8, "y":0 },
+                { "x":9, "y":0 },
+                { "x":10, "y":0 },
+                { "x":11, "y":0 },
+                { "x":12, "y":0 },
+                { "x":13, "y":0 },
+                { "x":14, "y":0 },
+                { "x":15, "y":0 },
+
+                { "x":0, "y":1, "w":1.5 },
+                { "x":1.5, "y":1 },
+                { "x":2.5, "y":1 },
+                { "x":3.5, "y":1 },
+                { "x":4.5, "y":1 },
+                { "x":5.5, "y":1 },
+                { "x":6.5, "y":1 },
+                { "x":7.5, "y":1 },
+                { "x":8.5, "y":1 },
+                { "x":9.5, "y":1 },
+                { "x":10.5, "y":1 },
+                { "x":11.5, "y":1 },
+                { "x":12.5, "y":1 },
+                { "x":13.5, "y":1, "w":1.5 },
+                { "x":15, "y":1 },
+
+                { "x":0, "y":2, "w":1.75 },
+                { "x":1.75, "y":2 },
+                { "x":2.75, "y":2 },
+                { "x":3.75, "y":2 },
+                { "x":4.75, "y":2 },
+                { "x":5.75, "y":2 },
+                { "x":6.75, "y":2 },
+                { "x":7.75, "y":2 },
+                { "x":8.75, "y":2 },
+                { "x":9.75, "y":2 },
+                { "x":10.75, "y":2 },
+                { "x":11.75, "y":2 },
+                { "x":12.75, "y":2, "w":2.25 },
+                { "x":15, "y":2 },
+
+                { "x":0, "y":3, "w":2.25 },
+                { "x":2.25, "y":3 },
+                { "x":3.25, "y":3 },
+                { "x":4.25, "y":3 },
+                { "x":5.25, "y":3 },
+                { "x":6.25, "y":3 },
+                { "x":7.25, "y":3 },
+                { "x":8.25, "y":3 },
+                { "x":9.25, "y":3 },
+                { "x":10.25, "y":3 },
+                { "x":11.25, "y":3 },
+                { "x":12.25, "y":3, "w":1.75 },
+                { "x":14, "y":3 },
+                { "x":15, "y":3 },
+
+                { "x":0, "y":4, "w":1.25 },
+                { "x":1.25, "y":4, "w":1.25 },
+                { "x":2.5, "y":4, "w":1.25 },
+                { "x":3.75, "y":4, "w":6.25 },
+                { "x":10, "y":4 },
+                { "x":11, "y":4 },
+                { "x":12, "y":4 },
+                { "x":13, "y":4 },
+                { "x":14, "y":4 },
+                { "x":15, "y":4 }
+            ]
+        },
+        "LAYOUT_65_ansi": {
+            "layout": [
+                { "x":0, "y":0 },
+                { "x":1, "y":0 },
+                { "x":2, "y":0 },
+                { "x":3, "y":0 },
+                { "x":4, "y":0 },
+                { "x":5, "y":0 },
+                { "x":6, "y":0 },
+                { "x":7, "y":0 },
+                { "x":8, "y":0 },
+                { "x":9, "y":0 },
+                { "x":10, "y":0 },
+                { "x":11, "y":0 },
+                { "x":12, "y":0 },
+                { "x":13, "y":0, "w": 2 },
+                { "x":15, "y":0 },
+
+                { "x":0, "y":1, "w":1.5 },
+                { "x":1.5, "y":1 },
+                { "x":2.5, "y":1 },
+                { "x":3.5, "y":1 },
+                { "x":4.5, "y":1 },
+                { "x":5.5, "y":1 },
+                { "x":6.5, "y":1 },
+                { "x":7.5, "y":1 },
+                { "x":8.5, "y":1 },
+                { "x":9.5, "y":1 },
+                { "x":10.5, "y":1 },
+                { "x":11.5, "y":1 },
+                { "x":12.5, "y":1 },
+                { "x":13.5, "y":1, "w":1.5 },
+                { "x":15, "y":1 },
+
+                { "x":0, "y":2, "w":1.75 },
+                { "x":1.75, "y":2 },
+                { "x":2.75, "y":2 },
+                { "x":3.75, "y":2 },
+                { "x":4.75, "y":2 },
+                { "x":5.75, "y":2 },
+                { "x":6.75, "y":2 },
+                { "x":7.75, "y":2 },
+                { "x":8.75, "y":2 },
+                { "x":9.75, "y":2 },
+                { "x":10.75, "y":2 },
+                { "x":11.75, "y":2 },
+                { "x":12.75, "y":2, "w":2.25 },
+                { "x":15, "y":2 },
+
+                { "x":0, "y":3, "w":2.25 },
+                { "x":2.25, "y":3 },
+                { "x":3.25, "y":3 },
+                { "x":4.25, "y":3 },
+                { "x":5.25, "y":3 },
+                { "x":6.25, "y":3 },
+                { "x":7.25, "y":3 },
+                { "x":8.25, "y":3 },
+                { "x":9.25, "y":3 },
+                { "x":10.25, "y":3 },
+                { "x":11.25, "y":3 },
+                { "x":12.25, "y":3, "w":1.75 },
+                { "x":14, "y":3 },
+                { "x":15, "y":3 },
+
+                { "x":0, "y":4, "w":1.25 },
+                { "x":1.25, "y":4, "w":1.25 },
+                { "x":2.5, "y":4, "w":1.25 },
+                { "x":3.75, "y":4, "w":6.25 },
+                { "x":10, "y":4 },
+                { "x":11, "y":4 },
+                { "x":12, "y":4 },
+                { "x":13, "y":4 },
+                { "x":14, "y":4 },
+                { "x":15, "y":4 }
+            ]
+        },
+        "LAYOUT_65_ansi_split_bs_2_right_mods": {
+            "layout": [
+                { "x":0, "y":0 },
+                { "x":1, "y":0 },
+                { "x":2, "y":0 },
+                { "x":3, "y":0 },
+                { "x":4, "y":0 },
+                { "x":5, "y":0 },
+                { "x":6, "y":0 },
+                { "x":7, "y":0 },
+                { "x":8, "y":0 },
+                { "x":9, "y":0 },
+                { "x":10, "y":0 },
+                { "x":11, "y":0 },
+                { "x":12, "y":0 },
+                { "x":13, "y":0 },
+                { "x":14, "y":0 },
+                { "x":15, "y":0 },
+
+                { "x":0, "y":1, "w":1.5 },
+                { "x":1.5, "y":1 },
+                { "x":2.5, "y":1 },
+                { "x":3.5, "y":1 },
+                { "x":4.5, "y":1 },
+                { "x":5.5, "y":1 },
+                { "x":6.5, "y":1 },
+                { "x":7.5, "y":1 },
+                { "x":8.5, "y":1 },
+                { "x":9.5, "y":1 },
+                { "x":10.5, "y":1 },
+                { "x":11.5, "y":1 },
+                { "x":12.5, "y":1 },
+                { "x":13.5, "y":1, "w":1.5 },
+                { "x":15, "y":1 },
+
+                { "x":0, "y":2, "w":1.75 },
+                { "x":1.75, "y":2 },
+                { "x":2.75, "y":2 },
+                { "x":3.75, "y":2 },
+                { "x":4.75, "y":2 },
+                { "x":5.75, "y":2 },
+                { "x":6.75, "y":2 },
+                { "x":7.75, "y":2 },
+                { "x":8.75, "y":2 },
+                { "x":9.75, "y":2 },
+                { "x":10.75, "y":2 },
+                { "x":11.75, "y":2 },
+                { "x":12.75, "y":2, "w":2.25 },
+                { "x":15, "y":2 },
+
+                { "x":0, "y":3, "w":2.25 },
+                { "x":2.25, "y":3 },
+                { "x":3.25, "y":3 },
+                { "x":4.25, "y":3 },
+                { "x":5.25, "y":3 },
+                { "x":6.25, "y":3 },
+                { "x":7.25, "y":3 },
+                { "x":8.25, "y":3 },
+                { "x":9.25, "y":3 },
+                { "x":10.25, "y":3 },
+                { "x":11.25, "y":3 },
+                { "x":12.25, "y":3, "w":1.75 },
+                { "x":14, "y":3 },
+                { "x":15, "y":3 },
+
+                { "x":0, "y":4, "w":1.25 },
+                { "x":1.25, "y":4, "w":1.25 },
+                { "x":2.5, "y":4, "w":1.25 },
+                { "x":3.75, "y":4, "w":6.25 },
+                { "x":10, "y":4, "w":1.5 },
+                { "x":11.5, "y":4, "w":1.5 },
+                { "x":13, "y":4 },
+                { "x":14, "y":4 },
+                { "x":15, "y":4 }
+            ]
+        },
+        "LAYOUT_65_ansi_2_right_mods": {
+            "layout": [
+                { "x":0, "y":0 },
+                { "x":1, "y":0 },
+                { "x":2, "y":0 },
+                { "x":3, "y":0 },
+                { "x":4, "y":0 },
+                { "x":5, "y":0 },
+                { "x":6, "y":0 },
+                { "x":7, "y":0 },
+                { "x":8, "y":0 },
+                { "x":9, "y":0 },
+                { "x":10, "y":0 },
+                { "x":11, "y":0 },
+                { "x":12, "y":0 },
+                { "x":13, "y":0, "w": 2 },
+                { "x":15, "y":0 },
+
+                { "x":0, "y":1, "w":1.5 },
+                { "x":1.5, "y":1 },
+                { "x":2.5, "y":1 },
+                { "x":3.5, "y":1 },
+                { "x":4.5, "y":1 },
+                { "x":5.5, "y":1 },
+                { "x":6.5, "y":1 },
+                { "x":7.5, "y":1 },
+                { "x":8.5, "y":1 },
+                { "x":9.5, "y":1 },
+                { "x":10.5, "y":1 },
+                { "x":11.5, "y":1 },
+                { "x":12.5, "y":1 },
+                { "x":13.5, "y":1, "w":1.5 },
+                { "x":15, "y":1 },
+
+                { "x":0, "y":2, "w":1.75 },
+                { "x":1.75, "y":2 },
+                { "x":2.75, "y":2 },
+                { "x":3.75, "y":2 },
+                { "x":4.75, "y":2 },
+                { "x":5.75, "y":2 },
+                { "x":6.75, "y":2 },
+                { "x":7.75, "y":2 },
+                { "x":8.75, "y":2 },
+                { "x":9.75, "y":2 },
+                { "x":10.75, "y":2 },
+                { "x":11.75, "y":2 },
+                { "x":12.75, "y":2, "w":2.25 },
+                { "x":15, "y":2 },
+
+                { "x":0, "y":3, "w":2.25 },
+                { "x":2.25, "y":3 },
+                { "x":3.25, "y":3 },
+                { "x":4.25, "y":3 },
+                { "x":5.25, "y":3 },
+                { "x":6.25, "y":3 },
+                { "x":7.25, "y":3 },
+                { "x":8.25, "y":3 },
+                { "x":9.25, "y":3 },
+                { "x":10.25, "y":3 },
+                { "x":11.25, "y":3 },
+                { "x":12.25, "y":3, "w":1.75 },
+                { "x":14, "y":3 },
+                { "x":15, "y":3 },
+
+                { "x":0, "y":4, "w":1.25 },
+                { "x":1.25, "y":4, "w":1.25 },
+                { "x":2.5, "y":4, "w":1.25 },
+                { "x":3.75, "y":4, "w":6.25 },
+                { "x":10, "y":4, "w":1.5 },
+                { "x":11.5, "y":4, "w":1.5 },
+                { "x":13, "y":4 },
+                { "x":14, "y":4 },
+                { "x":15, "y":4 }
+            ]
+        }
+    }
+}

keyboards/bakeneko65/keymaps/default/keymap.c

@@ -0,0 +1,38 @@
+/* Copyright 2020 kkatano
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+enum layer_names {
+    _BASE,
+    _FN
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [_BASE] = LAYOUT_65_ansi_split_bs(
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_GRV,  KC_BSPC, KC_HOME, 
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,          KC_BSLS, KC_END,  
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,                   KC_ENT,  KC_PGUP, 
+        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT, KC_UP,   KC_PGDN, 
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, MO(_FN), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+    [_FN] = LAYOUT_65_ansi_split_bs(
+        RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______, _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______,
+        _______, _______, _______,                            _______,                            _______, _______, _______, _______, _______, _______
+    )
+};

keyboards/bakeneko65/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for Bakeneko 65

keyboards/bakeneko65/keymaps/via/keymap.c

@@ -0,0 +1,54 @@
+/* Copyright 2020 kkatano
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+enum layer_names {
+    _L0,
+    _L1,
+    _L2,
+    _L3
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [_L0] = LAYOUT_65_ansi_split_bs(
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_GRV,  KC_BSPC, KC_HOME, 
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,          KC_BSLS, KC_END,  
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,                   KC_ENT,  KC_PGUP, 
+        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT, KC_UP,   KC_PGDN, 
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, MO(_L1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+    [_L1] = LAYOUT_65_ansi_split_bs(
+        RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______, _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______,
+        _______, _______, _______,                            _______,                            _______, _______, _______, _______, _______, _______
+    ),
+    [_L2] = LAYOUT_65_ansi_split_bs(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______, _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______,
+        _______, _______, _______,                            _______,                            _______, _______, _______, _______, _______, _______
+    ),
+    [_L3] = LAYOUT_65_ansi_split_bs(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______, _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______,
+        _______, _______, _______,                            _______,                            _______, _______, _______, _______, _______, _______
+    )
+};

keyboards/bakeneko65/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/bakeneko65/readme.md

@@ -0,0 +1,17 @@
+# Bakeneko 65
+
+An open source O-ring gasket mount keyboard
+
+* Keyboard Maintainer: [kkatano](https://github.com/kkatano)
+* Hardware Supported: Bakeneko 65
+* Hardware Availability: [Open source on GitHub](https://github.com/kkatano/bakeneko-65-pcb)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make bakeneko65:default
+
+Flashing example for this keyboard:
+
+    make bakeneko65:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/bakeneko65/rules.mk

@@ -0,0 +1,24 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
+
+LAYOUTS = 65_ansi

keyboards/bemeier/bmek/README.md

@@ -0,0 +1,30 @@
+# BMEK
+
+![BMEK](https://i.imgur.com/p1KFi6ql.jpg)
+
+BMEK combines the best of HHKB & Alice-likes. All PCB and case design files are open source.
+
+* Keyboard Maintainer: [Bemeier](https://github.com/Bemeier)
+* Hardware Supported: BMEK PCB rev1, rev2, rev3
+* Hardware Availability: Case & PCB files: [github.com/bemeier/bmek](https://github.com/bemeier/bmek)
+
+Make example for this keyboard, for an hhkb-like layout and keymap (after setting up your build environment):
+
+    make bemeier/bmek/rev3:default
+
+Make the VIA compatible firmware:
+
+    make bemeier/bmek/rev3:via
+
+The ```rev3```, denotes the version of the PCB.
+Check on the PCB to find out which version you have, and set it to rev1, rev2 or rev3 accordingly (the BMEK group buy PCBs are all rev3).
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+# Layouts
+
+Starting with rev3 (the version of the PCB to be shipped in the GB), the following layout options are supported:
+
+![layouts](https://i.imgur.com/XuFxwthl.png)
+
+Note that the keymap shown above may not accurately reflect the default keymap of the firmware (see the keymaps folder).

keyboards/bemeier/bmek/bmek.c

@@ -0,0 +1,23 @@
+/* Copyright 2020 bemeier
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "bmek.h"
+
+__attribute__((weak))
+void shutdown_user() {
+#ifdef RGBLIGHT_ENABLE
+    rgblight_setrgb(255, 0, 0);
+#endif
+}

keyboards/bemeier/bmek/bmek.h

@@ -0,0 +1,58 @@
+/* Copyright 2020 bemeier
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#if defined(KEYBOARD_bemeier_bmek_rev1)
+#    include "rev1.h"
+#elif defined(KEYBOARD_bemeier_bmek_rev2)
+#    include "rev2.h"
+#elif defined(KEYBOARD_bemeier_bmek_rev3)
+#    include "rev3.h"
+#endif
+
+#define XXX KC_NO  // makes the switch matrix easier to read
+
+// This layout is supported by all revisions
+#define LAYOUT_hhkb(\
+       K00, K01, K02, K03, K04, K05, K06, K07,     K08, K09, K0A, K0B, K0C, K0D, K0E, K1E,\
+      K10,  K11,  K12, K13, K14, K15, K16,        K17, K18, K19, K1A, K1B, K1C, K1D,   K2E,\
+     K20,   K21,   K22, K23, K24, K25, K26,        K27, K28, K29, K2A, K2B,     K2C,    K2D,\
+    K30,      K31,  K32,   K33, K34, K35, K36,   K37, K38, K39, K3A,  K3B, K3C,  K3D,    K3E,\
+                    K42,   K43,      K45,             K48,      K4A,  K4B                     \
+   ) { \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \
+    { XXX, XXX, K42, K43, XXX, K45, XXX, XXX, K48, XXX, K4A, K4B, XXX, XXX, XXX }  \
+}
+
+// Layout exposing all keys (adding the ISO-style split left shift, which is supported starting rev3)
+#define LAYOUT_all(\
+       K00, K01, K02, K03, K04, K05, K06, K07,     K08, K09, K0A, K0B, K0C, K0D, K0E, K1E,\
+      K10,  K11,  K12, K13, K14, K15, K16,        K17, K18, K19, K1A, K1B, K1C, K1D,   K2E,\
+     K20,   K21,   K22, K23, K24, K25, K26,        K27, K28, K29, K2A, K2B,     K2C,    K2D,\
+    K30,  K31, K41, K32,   K33, K34, K35, K36,   K37, K38, K39, K3A,  K3B, K3C,  K3D,    K3E,\
+                    K42,   K43,      K45,             K48,      K4A,  K4B                     \
+   ) { \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \
+    { XXX, K41, K42, K43, XXX, K45, XXX, XXX, K48, XXX, K4A, K4B, XXX, XXX, XXX }  \
+}

keyboards/bemeier/bmek/config.h

@@ -0,0 +1,47 @@
+/* Copyright 2020 bemeier
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x626D // BeMeier
+#define PRODUCT_ID 0x656B // ErgonomicKeyboard
+#define MANUFACTURER Bemeier
+#define PRODUCT BMEK
+
+#define DYNAMIC_KEYMAP_LAYER_COUNT 5
+#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 20 
+
+/* Keyboard Matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+#define DIODE_DIRECTION COL2ROW
+
+#define RGBLIGHT_EFFECT_BREATHING
+#define RGBLIGHT_EFFECT_RAINBOW_MOOD
+#define RGBLIGHT_MODE_STATIC_GRADIENT
+
+#define RGBLED_NUM 6
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#define RGBLIGHT_LIMIT_VAL 255
+
+#define DEBOUNCE 5
+//#define RETRO_TAPPING
+#define TAPPING_TERM 175

keyboards/bemeier/bmek/info.json

@@ -0,0 +1,25 @@
+{
+    "keyboard_name": "bmek", 
+    "url": "https://github.com/Bemeier/bmek", 
+    "maintainer": "Bemeier", 
+    "width": 18, 
+    "height": 5,
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [
+                {"label":"Home", "x":0, "y":0}, {"label":"Esc", "x":1.5, "y":0}, {"label":"!", "x":2.5, "y":0}, {"label":"@", "x":3.5, "y":0}, {"label":"#", "x":4.5, "y":0}, {"label":"$", "x":5.5, "y":0}, {"label":"%", "x":6.5, "y":0}, {"label":"^", "x":7.5, "y":0}, {"label":"&", "x":10, "y":0}, {"label":"*", "x":11, "y":0}, {"label":"(", "x":12, "y":0}, {"label":")", "x":13, "y":0}, {"label":"_", "x":14, "y":0}, {"label":"+", "x":15, "y":0}, {"label":"|", "x":16, "y":0}, {"label":"~", "x":17, "y":0},
+                {"label":"PgUp", "x":0, "y":1}, {"label":"Tab", "x":1.5, "y":1, "w":1.5}, {"label":"Q", "x":3, "y":1}, {"label":"W", "x":4, "y":1}, {"label":"E", "x":5, "y":1}, {"label":"R", "x":6, "y":1}, {"label":"T", "x":7, "y":1}, {"label":"Y", "x":9.5, "y":1}, {"label":"U", "x":10.5, "y":1}, {"label":"I", "x":11.5, "y":1}, {"label":"O", "x":12.5, "y":1}, {"label":"P", "x":13.5, "y":1}, {"label":"{", "x":14.5, "y":1}, {"label":"}", "x":15.5, "y":1}, {"label":"Backspace", "x":16.5, "y":1, "w":1.5},
+                {"label":"PgDn", "x":0, "y":2}, {"label":"Ctrl", "x":1.5, "y":2, "w":1.75}, {"label":"A", "x":3.25, "y":2}, {"label":"S", "x":4.25, "y":2}, {"label":"D", "x":5.25, "y":2}, {"label":"F", "x":6.25, "y":2}, {"label":"G", "x":7.25, "y":2}, {"label":"H", "x":9.75, "y":2}, {"label":"J", "x":10.75, "y":2}, {"label":"K", "x":11.75, "y":2}, {"label":"L", "x":12.75, "y":2}, {"label":":", "x":13.75, "y":2}, {"label":"\"", "x":14.75, "y":2}, {"label":"Enter", "x":15.75, "y":2, "w":2.25},
+                {"label":"End", "x":0, "y":3}, {"label":"Shift", "x":1.5, "y":3, "w":1.25}, {"label":"~", "x":2.75, "y":3}, {"label":"Z", "x":3.75, "y":3}, {"label":"X", "x":4.75, "y":3}, {"label":"C", "x":5.75, "y":3}, {"label":"V", "x":6.75, "y":3}, {"label":"B", "x":7.75, "y":3}, {"label":"B", "x":9.25, "y":3}, {"label":"N", "x":10.25, "y":3}, {"label":"M", "x":11.25, "y":3}, {"label":"<", "x":12.25, "y":3}, {"label":">", "x":13.25, "y":3}, {"label":"?", "x":14.25, "y":3}, {"label":"Shift", "x":15.25, "y":3, "w":1.75}, {"label":"Fn", "x":17, "y":3}, {"label":"Win", "x":3.75, "y":4}, {"label":"Alt", "x":4.75, "y":4, "w":1.25}, {"x":6, "y":4, "w":2.75}, {"x":9.25, "y":4, "w":2.75}, {"label":"Alt", "x":12, "y":4, "w":1.25}, {"label":"Win", "x":13.25, "y":4}
+            ]
+        },
+        "LAYOUT_hhkb": {
+            "layout": [
+                {"label":"Home", "x":0, "y":0}, {"label":"Esc", "x":1.5, "y":0}, {"label":"!", "x":2.5, "y":0}, {"label":"@", "x":3.5, "y":0}, {"label":"#", "x":4.5, "y":0}, {"label":"$", "x":5.5, "y":0}, {"label":"%", "x":6.5, "y":0}, {"label":"^", "x":7.5, "y":0}, {"label":"&", "x":10, "y":0}, {"label":"*", "x":11, "y":0}, {"label":"(", "x":12, "y":0}, {"label":")", "x":13, "y":0}, {"label":"_", "x":14, "y":0}, {"label":"+", "x":15, "y":0}, {"label":"|", "x":16, "y":0}, {"label":"~", "x":17, "y":0},
+                {"label":"PgUp", "x":0, "y":1}, {"label":"Tab", "x":1.5, "y":1, "w":1.5}, {"label":"Q", "x":3, "y":1}, {"label":"W", "x":4, "y":1}, {"label":"E", "x":5, "y":1}, {"label":"R", "x":6, "y":1}, {"label":"T", "x":7, "y":1}, {"label":"Y", "x":9.5, "y":1}, {"label":"U", "x":10.5, "y":1}, {"label":"I", "x":11.5, "y":1}, {"label":"O", "x":12.5, "y":1}, {"label":"P", "x":13.5, "y":1}, {"label":"{", "x":14.5, "y":1}, {"label":"}", "x":15.5, "y":1}, {"label":"Backspace", "x":16.5, "y":1, "w":1.5},
+                {"label":"PgDn", "x":0, "y":2}, {"label":"Ctrl", "x":1.5, "y":2, "w":1.75}, {"label":"A", "x":3.25, "y":2}, {"label":"S", "x":4.25, "y":2}, {"label":"D", "x":5.25, "y":2}, {"label":"F", "x":6.25, "y":2}, {"label":"G", "x":7.25, "y":2}, {"label":"H", "x":9.75, "y":2}, {"label":"J", "x":10.75, "y":2}, {"label":"K", "x":11.75, "y":2}, {"label":"L", "x":12.75, "y":2}, {"label":":", "x":13.75, "y":2}, {"label":"\"", "x":14.75, "y":2}, {"label":"Enter", "x":15.75, "y":2, "w":2.25},
+                {"label":"End", "x":0, "y":3}, {"label":"Shift", "x":1.5, "y":3, "w":2.25}, {"label":"Z", "x":3.75, "y":3}, {"label":"X", "x":4.75, "y":3}, {"label":"C", "x":5.75, "y":3}, {"label":"V", "x":6.75, "y":3}, {"label":"B", "x":7.75, "y":3}, {"label":"B", "x":9.25, "y":3}, {"label":"N", "x":10.25, "y":3}, {"label":"M", "x":11.25, "y":3}, {"label":"<", "x":12.25, "y":3}, {"label":">", "x":13.25, "y":3}, {"label":"?", "x":14.25, "y":3}, {"label":"Shift", "x":15.25, "y":3, "w":1.75}, {"label":"Fn", "x":17, "y":3}, {"label":"Win", "x":3.75, "y":4}, {"label":"Alt", "x":4.75, "y":4, "w":1.25}, {"x":6, "y":4, "w":2.75}, {"x":9.25, "y":4, "w":2.75}, {"label":"Alt", "x":12, "y":4, "w":1.25}, {"label":"Win", "x":13.25, "y":4}
+            ]
+        }
+    }
+}

keyboards/bemeier/bmek/keymaps/default/README.md

@@ -0,0 +1,4 @@
+# Default BMEK Keymap
+This is the default keymap for the BMEK, besides the left macro columns and the split spacebars.
+It's uses the HHKB-like layout options (no split left shift, split backspace and split right shift).
+Please checkout the diagrams in ```keymap.c``` for an overview of the keymap.

keyboards/bemeier/bmek/keymaps/default/keymap.c

@@ -0,0 +1,76 @@
+/* Copyright 2020 bemeier
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+   [0] = LAYOUT_hhkb(
+/* Default layer
+┌─────┐ ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┐    ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│ F13 │ │ ESC │  1  │  2  │  3  │  4  │  5  │  6  │    │  7  │  8  │  9  │  0  │  -  │  =  │  \  │  `  │
+├─────┤ ├─────┴─┬───┴─┬───┴─┬───┴─┬───┴─┬───┴─┬───┘  ┌─┴───┬─┴───┬─┴───┬─┴───┬─┴───┬─┴───┬─┴───┬─┴─────┤
+│ F14 │ │  TAB  │  Q  │  W  │  E  │  R  │  T  │      │  Y  │  U  │  I  │  O  │  P  │  [  │  ]  │  BSPC │
+├─────┤ ├───────┴┬────┴┬────┴┬────┴┬────┴┬────┴┐     └─┬───┴─┬───┴─┬───┴─┬───┴─┬───┴─┬───┴─┬───┴───────┤
+│ F15 │ │  CTRL  │  A  │  S  │  D  │  F  │  G  │       │  H  │  J  │  K  │  L  │  ;  │  '  │   ENTER   │
+├─────┤ ├────────┴┬────┴┬────┴┬────┴┬────┴┬────┴┐     ┌┴────┬┴────┬┴────┬┴────┬┴────┬┴────┬┴──────┬────┤
+│ F16 │ │ SHFT    │  Z  │  X  │  C  │  V  │  B  │     │  B  │  N  │  M  │  ,  │  .  │  /  │  SHFT │ Fn │
+└─────┘ └─────────┼─────┼─────┴┬────┴─────┴─────┤     ├─────┴─────┴────┬┴─────┼─────┼─────┴───────┴────┘
+                  │ GUI │ ALT  │     SPACE      │     │   SPACE/Fn_1   │  ALT │ CTL │
+                  └─────┴──────┴────────────────┘     └────────────────┴──────┴─────┘
+*/
+  KC_F13,  KC_ESC,    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,     KC_7,    KC_8,    KC_9,    KC_0, KC_MINS,  KC_EQL, KC_BSLS,  KC_GRV,
+  KC_F14,  KC_TAB,      KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,           KC_Y,    KC_U,    KC_I,    KC_O,    KC_P, KC_LBRC, KC_RBRC,  KC_BSPC,
+  KC_F15, KC_LCTL,       KC_A,    KC_S,    KC_D,    KC_F,    KC_G,             KC_H,    KC_J,    KC_K,    KC_L, KC_SCLN, KC_QUOT,         KC_ENT,
+  KC_F16, KC_LSFT,         KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,         KC_B,   KC_N,    KC_M, KC_COMM,  KC_DOT, KC_SLSH,   KC_RSFT,  MO(1),
+                     KC_LGUI, KC_LALT,                KC_SPC,           LT(1, KC_SPC),          KC_RALT, KC_RCTL
+), [1] = LAYOUT_hhkb(
+/* Function Layer 1: Nav
+┌─────┐ ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┐    ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│ RST │ │ PWR │ F1  │ F2  │ F3  │ F4  │ F5  │ F6  │    │ F7  │ F8  │ F9  │ F10 │ F11 │ F12 │ INS │ DEL │
+├─────┤ ├─────┴─┬───┴─┬───┴─┬───┴─┬───┴─┬───┴─┬───┘  ┌─┴───┬─┴───┬─┴───┬─┴───┬─┴───┬─┴───┬─┴───┬─┴─────┤
+│     │ │ CAPS  │     │     │     │     │     │      │     │     │PSCR │SLCK │PAUS │  ^  │     │       │
+├─────┤ ├───────┴┬────┴┬────┴┬────┴┬────┴┬────┴┐     └─┬───┴─┬───┴─┬───┴─┬───┴─┬───┴─┬───┴─┬───┴───────┤
+│     │ │        │ o)  │ o)} │  Ø  │EJCT │     │       │  *  │  /  │HOME │PGUP │ <-  │  -> │           │
+├─────┤ ├────────┴┬────┴┬────┴┬────┴┬────┴┬────┴┐     ┌┴────┬┴────┬┴────┬┴────┬┴────┬┴────┬┴──────┬────┤
+│     │ │         │     │     │ CFG │     │     │     │  +  │  -  │     │ END │PGDN │  v  │       │    │
+└─────┘ └─────────┼─────┼─────┴┬────┴─────┴─────┤     ├─────┴─────┴────┬┴─────┼─────┼─────┴───────┴────┘
+                  │     │      │                │     │                │      │     │
+                  └─────┴──────┴────────────────┘     └────────────────┴──────┴─────┘
+*/
+ RESET,   KC_PWR,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,    KC_F7,   KC_F8,   KC_F9,  KC_F10,  KC_F11,  KC_F12,  KC_INS,  KC_DEL,
+ _______, KC_CAPS,   _______, _______, _______, _______, _______,        _______, _______, KC_PSCR, KC_SLCK, KC_PAUS,   KC_UP, _______,  _______,
+ _______, _______,    KC_VOLD, KC_VOLU, KC_MUTE, KC_EJCT, _______,          KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT,        KC_PENT,
+ _______, _______, _______, _______, TG(2), _______, _______, _______,    KC_PPLS, KC_PMNS,  KC_END, KC_PGDN, KC_DOWN,       _______,    _______,
+                     _______, _______,               _______,                 _______,          _______, _______
+), [2] = LAYOUT_hhkb(
+/* Function Layer 4: Firmware Config (TODO)
+┌─────┐ ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┐    ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│ RST │ │     │     │     │     │     │     │     │    │     │     │     │     │     │     │     │     │
+├─────┤ ├─────┴─┬───┴─┬───┴─┬───┴─┬───┴─┬───┴─┬───┘  ┌─┴───┬─┴───┬─┴───┬─┴───┬─┴───┬─┴───┬─┴───┬─┴─────┤
+│     │ │       │ RGB │RGB+ │RGB- │HUE+ │HUE- │      │     │     │     │     │     │     │     │       │
+├─────┤ ├───────┴┬────┴┬────┴┬────┴┬────┴┬────┴┐     └─┬───┴─┬───┴─┬───┴─┬───┴─┬───┴─┬───┴─┬───┴───────┤
+│     │ │        │     │SPD+ │SPD- │SAT+ │SAT- │       │     │     │     │     │     │     │           │
+├─────┤ ├────────┴┬────┴┬────┴┬────┴┬────┴┬────┴┐     ┌┴────┬┴────┬┴────┬┴────┬┴────┬┴────┬┴──────┬────┤
+│     │ │         │     │     │ ___ │VAL+ │VAL- │     │     │     │     │     │     │     │       │    │
+└─────┘ └─────────┼─────┼─────┴┬────┴─────┴─────┤     ├─────┴─────┴────┬┴─────┼─────┼─────┴───────┴────┘
+                  │     │      │                │     │                │      │     │
+                  └─────┴──────┴────────────────┘     └────────────────┴──────┴─────┘
+*/
+ RESET,   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+ XXXXXXX, XXXXXXX,  RGB_TOG, RGB_MOD, RGB_RMOD, RGB_HUI, RGB_HUD,        XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX,
+ XXXXXXX, XXXXXXX,    XXXXXXX, RGB_SPI, RGB_SPD, RGB_SAI, RGB_SAD,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,        XXXXXXX,
+ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,   TG(2), RGB_VAI, RGB_VAD,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  _______,
+                     XXXXXXX, XXXXXXX,               XXXXXXX,                 _______,          XXXXXXX, XXXXXXX
+) };

keyboards/bemeier/bmek/keymaps/via/README.md

@@ -0,0 +1,18 @@
+# Default VIA Keymap
+Compile the firmware with this keymap for use the BMEK with the [VIA configurator](https://caniusevia.com/).
+Layout options can be configured in VIA (see first screenshot below).
+
+## 0: Base Layer
+![Base Layer](https://i.imgur.com/tBu50SS.png)
+
+## 1: Nav Layer
+![Nav Layer](https://i.imgur.com/ZzEow3t.png)
+
+## 2: NUM Block
+![NUM Block](https://i.imgur.com/vzjZIa1.png)
+
+## 4: FW Config
+![FW Config](https://i.imgur.com/L7QynAb.png)
+
+## Alternative Preconfigured Layouts
+TODO: Provide (links to) some alternative via keymaps after VIA support is landed upstream.

keyboards/bemeier/bmek/keymaps/via/keymap.c

@@ -0,0 +1,114 @@
+/* Copyright 2020 bemeier
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+   [0] = LAYOUT_all(
+/* Default layer
+┌─────┐ ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┐    ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│ F13 │ │ ESC │  1  │  2  │  3  │  4  │  5  │  6  │    │  7  │  8  │  9  │  0  │  -  │  =  │  \  │  `  │
+├─────┤ ├─────┴─┬───┴─┬───┴─┬───┴─┬───┴─┬───┴─┬───┘  ┌─┴───┬─┴───┬─┴───┬─┴───┬─┴───┬─┴───┬─┴───┬─┴─────┤
+│ F14 │ │  TAB  │  Q  │  W  │  E  │  R  │  T  │      │  Y  │  U  │  I  │  O  │  P  │  [  │  ]  │  BSPC │
+├─────┤ ├───────┴┬────┴┬────┴┬────┴┬────┴┬────┴┐     └─┬───┴─┬───┴─┬───┴─┬───┴─┬───┴─┬───┴─┬───┴───────┤
+│ F15 │ │  CTRL  │  A  │  S  │  D  │  F  │  G  │       │  H  │  J  │  K  │  L  │  ;  │  '  │   ENTER   │
+├─────┤ ├───────┬┴┬────┴┬────┴┬────┴┬────┴┬────┴┐     ┌┴────┬┴────┬┴────┬┴────┬┴────┬┴────┬┴──────┬────┤
+│ F16 │ │ SHFT  │`│  Z  │  X  │  C  │  V  │  B  │     │  B  │  N  │  M  │  ,  │  .  │  /  │  SHFT │ Fn │
+└─────┘ └───────┴─┼─────┼─────┴┬────┴─────┴─────┤     ├─────┴─────┴────┬┴─────┼─────┼─────┴───────┴────┘
+                  │ GUI │ ALT  │     SPACE      │     │   SPACE/Fn_1   │  ALT │ CTL │
+                  └─────┴──────┴────────────────┘     └────────────────┴──────┴─────┘
+*/
+  KC_F13,  KC_ESC,    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,     KC_7,    KC_8,    KC_9,    KC_0, KC_MINS,  KC_EQL, KC_BSLS,  KC_GRV,
+  KC_F14,  KC_TAB,      KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,           KC_Y,    KC_U,    KC_I,    KC_O,    KC_P, KC_LBRC, KC_RBRC,  KC_BSPC,
+  KC_F15, KC_LCTL,       KC_A,    KC_S,    KC_D,    KC_F,    KC_G,             KC_H,    KC_J,    KC_K,    KC_L, KC_SCLN, KC_QUOT,         KC_ENT,
+  KC_F16, KC_LSFT,  KC_GRV,    KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_B,    KC_N,    KC_M, KC_COMM,  KC_DOT, KC_SLSH, KC_RSFT,    MO(1),
+                     KC_LGUI, KC_LALT,                KC_SPC,           LT(1, KC_SPC),          KC_RALT, KC_RCTL
+), [1] = LAYOUT_all(
+/* Function Layer 1: Nav
+┌─────┐ ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┐    ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│ RST │ │     │ F1  │ F2  │ F3  │ F4  │ F5  │ F6  │    │ F7  │ F8  │ F9  │ F10 │ F11 │ F12 │ INS │ DEL │
+├─────┤ ├─────┴─┬───┴─┬───┴─┬───┴─┬───┴─┬───┴─┬───┘  ┌─┴───┬─┴───┬─┴───┬─┴───┬─┴───┬─┴───┬─┴───┬─┴─────┤
+│     │ │       │ END │  ^  │HOME │PGUP │     │      │     │     │     │     │ |>  │ <<  │ >>  │       │
+├─────┤ ├───────┴┬────┴┬────┴┬────┴┬────┴┬────┴┐     └─┬───┴─┬───┴─┬───┴─┬───┴─┬───┴─┬───┴─┬───┴───────┤
+│     │ │        │ <-  │  v  │ ->  │PGDN │     │       │ <-  │  v  │  ^  │ ->  │ o)  │ o)} │           │
+├─────┤ ├───────┬┴┬────┴┬────┴┬────┴┬────┴┬────┴┐     ┌┴────┬┴────┬┴────┬┴────┬┴────┬┴────┬┴──────┬────┤
+│     │ │       │ │     │     │ CFG │     │ NUM │     │     │     │     │LDSKT│RDSKT│  Ø  │       │    │
+└─────┘ └───────┴─┼─────┼─────┴┬────┴─────┴─────┤     ├─────┴─────┴────┬┴─────┼─────┼─────┴───────┴────┘
+                  │     │      │                │     │                │      │     │
+                  └─────┴──────┴────────────────┘     └────────────────┴──────┴─────┘
+*/
+ RESET,   _______,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,    KC_F7,   KC_F8,   KC_F9,  KC_F10,  KC_F11,  KC_F12,  KC_INS,  KC_DEL,
+ _______, _______,    KC_END,   KC_UP, KC_HOME, KC_PGUP, XXXXXXX,        XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MPLY, KC_MPRV, KC_MNXT,  _______,
+ _______, _______,    KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, XXXXXXX,          KC_LEFT, KC_DOWN,   KC_UP, KC_RGHT, KC_VOLD, KC_VOLU,        _______,
+ _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, TG(4), XXXXXXX, XXXXXXX, TG(2), XXXXXXX, XXXXXXX, LCTL(LGUI(KC_LEFT)), LCTL(LGUI(KC_RGHT)), KC_MUTE, _______,  _______,
+                     _______, _______,               _______,                 _______,          _______, _______
+), [2] = LAYOUT_all(
+/* Function Layer 2: Numpad example
+┌─────┐ ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┐    ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│     │ │     │     │     │     │     │     │     │    │  7  │  8  │  9  │  0  │  -  │  +  │     │     │
+├─────┤ ├─────┴─┬───┴─┬───┴─┬───┴─┬───┴─┬───┴─┬───┘  ┌─┴───┬─┴───┬─┴───┬─┴───┬─┴───┬─┴───┬─┴───┬─┴─────┤
+│     │ │       │     │     │     │     │     │      │  4  │  5  │  6  │     │  /  │  *  │     │       │
+├─────┤ ├───────┴┬────┴┬────┴┬────┴┬────┴┬────┴┐     └─┬───┴─┬───┴─┬───┴─┬───┴─┬───┴─┬───┴─┬───┴───────┤
+│     │ │        │     │     │     │     │     │       │  1  │  2  │  3  │     │     │     │ KP_ENTER  │
+├─────┤ ├───────┬┴┬────┴┬────┴┬────┴┬────┴┬────┴┐     ┌┴────┬┴────┬┴────┬┴────┬┴────┬┴────┬┴──────┬────┤
+│     │ │       │ │     │     │     │     │     │     │ ___ │  0  │  .  │     │     │     │       │    │
+└─────┘ └───────┴─┼─────┼─────┴┬────┴─────┴─────┤     ├─────┴─────┴────┬┴─────┼─────┼─────┴───────┴────┘
+                  │     │      │                │     │                │      │     │
+                  └─────┴──────┴────────────────┘     └────────────────┴──────┴─────┘
+*/
+ _______, _______, _______, _______, _______, _______, _______, _______,  KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_0, KC_PMNS, KC_PPLS, _______, _______,
+ _______, _______,   _______, _______, _______, _______, _______,        KC_KP_4, KC_KP_5, KC_KP_6, XXXXXXX, KC_PSLS, KC_PAST, _______,  _______,
+ _______, _______,    _______, _______, _______, _______, _______,          KC_KP_1, KC_KP_2, KC_KP_3, XXXXXXX, _______, _______,        KC_PENT,
+ _______, _______, _______, _______, _______, _______, _______, _______,   TG(2), KC_KP_0, KC_PDOT, _______, _______, _______, _______,  _______,
+                     _______, _______,               _______,                 _______,          _______, _______
+), [3] = LAYOUT_all(
+/* Function Layer 3
+┌─────┐ ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┐    ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│     │ │     │     │     │     │     │     │     │    │     │     │     │     │     │     │     │     │
+├─────┤ ├─────┴─┬───┴─┬───┴─┬───┴─┬───┴─┬───┴─┬───┘  ┌─┴───┬─┴───┬─┴───┬─┴───┬─┴───┬─┴───┬─┴───┬─┴─────┤
+│     │ │       │     │     │     │     │     │      │     │     │     │     │     │     │     │       │
+├─────┤ ├───────┴┬────┴┬────┴┬────┴┬────┴┬────┴┐     └─┬───┴─┬───┴─┬───┴─┬───┴─┬───┴─┬───┴─┬───┴───────┤
+│     │ │        │     │     │     │     │     │       │     │     │     │     │     │     │           │
+├─────┤ ├───────┬┴┬────┴┬────┴┬────┴┬────┴┬────┴┐     ┌┴────┬┴────┬┴────┬┴────┬┴────┬┴────┬┴──────┬────┤
+│     │ │       │ │     │     │     │     │     │     │     │     │     │     │     │     │       │    │
+└─────┘ └───────┴─┼─────┼─────┴┬────┴─────┴─────┤     ├─────┴─────┴────┬┴─────┼─────┼─────┴───────┴────┘
+                  │     │      │                │     │                │      │     │
+                  └─────┴──────┴────────────────┘     └────────────────┴──────┴─────┘
+*/
+ _______, _______, _______, _______, _______, _______, _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______,   _______, _______, _______, _______, _______,        _______, _______, _______, _______, _______, _______, _______,  _______,
+ _______, _______,    _______, _______, _______, _______, _______,          _______, _______, _______, _______, _______, _______,        _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______,
+                     _______, _______,               _______,                 _______,          _______, _______
+), [4] = LAYOUT_all(
+/* Function Layer 4: Firmware Config
+┌─────┐ ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┐    ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│ RST │ │     │     │     │     │     │     │     │    │     │     │     │     │     │     │     │     │
+├─────┤ ├─────┴─┬───┴─┬───┴─┬───┴─┬───┴─┬───┴─┬───┘  ┌─┴───┬─┴───┬─┴───┬─┴───┬─┴───┬─┴───┬─┴───┬─┴─────┤
+│     │ │       │ RGB │RGB+ │RGB- │HUE+ │HUE- │      │     │     │     │     │     │     │     │       │
+├─────┤ ├───────┴┬────┴┬────┴┬────┴┬────┴┬────┴┐     └─┬───┴─┬───┴─┬───┴─┬───┴─┬───┴─┬───┴─┬───┴───────┤
+│     │ │        │     │SPD+ │SPD- │SAT+ │SAT- │       │     │     │     │     │     │     │           │
+├─────┤ ├───────┬┴┬────┴┬────┴┬────┴┬────┴┬────┴┐     ┌┴────┬┴────┬┴────┬┴────┬┴────┬┴────┬┴──────┬────┤
+│     │ │       │ │     │     │ ___ │VAL+ │VAL- │     │     │     │     │     │     │     │       │    │
+└─────┘ └───────┴─┼─────┼─────┴┬────┴─────┴─────┤     ├─────┴─────┴────┬┴─────┼─────┼─────┴───────┴────┘
+                  │     │      │                │     │                │      │     │
+                  └─────┴──────┴────────────────┘     └────────────────┴──────┴─────┘
+*/
+ RESET,   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+ XXXXXXX, XXXXXXX,  RGB_TOG, RGB_MOD, RGB_RMOD, RGB_HUI, RGB_HUD,        XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX,
+ XXXXXXX, XXXXXXX,    XXXXXXX, RGB_SPI, RGB_SPD, RGB_SAI, RGB_SAD,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,        XXXXXXX,
+ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,   TG(4), RGB_VAI, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  _______,
+                     XXXXXXX, XXXXXXX,               XXXXXXX,                 _______,          XXXXXXX, XXXXXXX
+) };

keyboards/bemeier/bmek/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/bemeier/bmek/rev1/config.h

@@ -0,0 +1,29 @@
+/* Copyright 2020 bemeier
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "config_common.h"
+
+#define DEVICE_VER      0x0001
+
+#define MATRIX_ROW_PINS \
+    { D4, D7, B6, B4, B7 }
+#define MATRIX_COL_PINS \
+    { F1, B0, B1, B2, B3, D0, D1, D2, C6, C7, F7, F6, F5, F4, B5 }
+#define UNUSED_PINS \
+    { D4, D5, F0, B7 }
+#define RGB_DI_PIN E6
+

keyboards/bemeier/bmek/rev1/rev1.c

@@ -0,0 +1,16 @@
+/* Copyright 2020 bemeier
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "rev1.h"

keyboards/bemeier/bmek/rev1/rev1.h

@@ -0,0 +1,18 @@
+/* Copyright 2020 bemeier
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"

keyboards/bemeier/bmek/rev1/rules.mk

@@ -0,0 +1,21 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE      = lite
+MOUSEKEY_ENABLE       = no
+EXTRAKEY_ENABLE       = yes
+CONSOLE_ENABLE        = no
+COMMAND_ENABLE        = no
+SLEEP_LED_ENABLE      = yes
+SPLIT_KEYBOARD        = no
+BACKLIGHT_ENABLE      = no
+NKRO_ENABLE           = yes
+RGBLIGHT_ENABLE       = yes
+AUDIO_ENABLE          = no
+LTO_ENABLE            = yes

keyboards/bemeier/bmek/rev2/config.h

@@ -0,0 +1,29 @@
+/* Copyright 2020 bemeier
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "config_common.h"
+
+#define DEVICE_VER      0x0002
+
+#define MATRIX_ROW_PINS \
+    { F4, F5, D7, B5, B4 }
+#define MATRIX_COL_PINS \
+    { F6, B0, B1, F7, C7, C6, B6, F1, B2, B3, D6, D3, D2, D1, D0 } 
+#define UNUSED_PINS \
+    { D4, D5, F0, B7 }
+
+#define RGB_DI_PIN E6

keyboards/bemeier/bmek/rev2/rev2.c

@@ -0,0 +1,16 @@
+/* Copyright 2020 bemeier
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "rev2.h"

keyboards/bemeier/bmek/rev2/rev2.h

@@ -0,0 +1,18 @@
+/* Copyright 2020 bemeier
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"

keyboards/bemeier/bmek/rev2/rules.mk

@@ -0,0 +1,21 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE      = lite
+MOUSEKEY_ENABLE       = no
+EXTRAKEY_ENABLE       = yes
+CONSOLE_ENABLE        = no
+COMMAND_ENABLE        = no
+SLEEP_LED_ENABLE      = yes
+SPLIT_KEYBOARD        = no
+BACKLIGHT_ENABLE      = no
+NKRO_ENABLE           = yes
+RGBLIGHT_ENABLE       = yes
+AUDIO_ENABLE          = no
+LTO_ENABLE            = yes

keyboards/bemeier/bmek/rev3/config.h

@@ -0,0 +1,29 @@
+/* Copyright 2020 bemeier
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "config_common.h"
+
+#define DEVICE_VER      0x0003
+
+#define MATRIX_ROW_PINS \
+    { F1, B4, B5, D6, D7 }
+#define MATRIX_COL_PINS \
+    { B6, C6, C7, F7, F6, F5, F4, F0, B7, D0, D1, D2, D3, D5, D4 } 
+#define UNUSED_PINS \
+    { D0, B1, B2, B3 }
+
+#define RGB_DI_PIN E6

keyboards/bemeier/bmek/rev3/rev3.c

@@ -0,0 +1,16 @@
+/* Copyright 2020 bemeier
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "rev3.h"

keyboards/bemeier/bmek/rev3/rev3.h

@@ -0,0 +1,24 @@
+/* Copyright 2020 bemeier
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/*
+PCB rev3 has a number of layout options that rev2 and rev1 don't have,
+however, to me just using "ALL_67" for all for all keymaps seems easier to
+maintain than adding all possible permutations of layout options here.
+*/

keyboards/bemeier/bmek/rev3/rules.mk

@@ -0,0 +1,21 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE      = lite
+MOUSEKEY_ENABLE       = no
+EXTRAKEY_ENABLE       = yes
+CONSOLE_ENABLE        = no
+COMMAND_ENABLE        = no
+SLEEP_LED_ENABLE      = yes
+SPLIT_KEYBOARD        = no
+BACKLIGHT_ENABLE      = no
+NKRO_ENABLE           = yes
+RGBLIGHT_ENABLE       = yes
+AUDIO_ENABLE          = no
+LTO_ENABLE            = yes

keyboards/binepad/bn003/bn003.c

@@ -0,0 +1,16 @@
+/* Copyright 2020 BINEPAD
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "bn003.h"

keyboards/binepad/bn003/bn003.h

@@ -0,0 +1,23 @@
+/* Copyright 2020 BINEPAD
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "quantum.h"
+
+#define LAYOUT( \
+    K00, K01, K02 \
+) { \
+    { K00, K01, K02 } \
+}
+

keyboards/binepad/bn003/config.h

@@ -0,0 +1,89 @@
+/* Copyright 2020 BINEPAD
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x4249 // Binepad
+#define PRODUCT_ID      0x4287
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Binepad
+#define PRODUCT         BN003
+
+/* Key matrix size */
+#define MATRIX_ROWS 1
+#define MATRIX_COLS 3
+
+#define MATRIX_ROW_PINS { C6 }
+#define MATRIX_COL_PINS { B4, B5, B6 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */

keyboards/binepad/bn003/info.json

@@ -0,0 +1,28 @@
+{
+  "keyboard_name": "BN003",
+  "url": "https://binepad.com",
+  "maintainer": "binepad",
+  "width": 3,
+  "height": 1,
+  "layouts": {
+    "LAYOUT": {
+      "layout": [
+        {
+          "label": "K0",
+          "x": 0,
+          "y": 0
+        },
+        {
+          "label": "K1",
+          "x": 1,
+          "y": 0
+        },
+        {
+          "label": "K2",
+          "x": 2,
+          "y": 0
+        }
+      ]
+    }
+  }
+}

keyboards/binepad/bn003/keymaps/default/keymap.c

@@ -0,0 +1,19 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_0,
+        KC_1,
+        KC_2
+    ),
+    [1] = LAYOUT(
+        KC_NO,
+        KC_NO,
+        KC_NO
+    ),
+    [2] = LAYOUT(
+        KC_NO,
+        KC_NO,
+        KC_NO
+    )
+};

keyboards/binepad/bn003/keymaps/default/readme.md

@@ -0,0 +1 @@
+# bn003 - Default layout

keyboards/binepad/bn003/keymaps/via/keymap.c

@@ -0,0 +1,24 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_0,
+        KC_1,
+        KC_2
+    ),
+    [1] = LAYOUT(
+        KC_NO,
+        KC_NO,
+        KC_NO
+    ),
+    [2] = LAYOUT(
+        KC_NO,
+        KC_NO,
+        KC_NO
+    ),
+    [3] = LAYOUT(
+        KC_NO,
+        KC_NO,
+        KC_NO
+    )
+};

keyboards/binepad/bn003/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/binepad/bn003/readme.md

@@ -0,0 +1,15 @@
+# BINEPAD BN003
+
+![BINEPAD BN003](https://imgur.com/q8JPcNEl.jpg)
+
+A 3% macropad.
+
+* Keyboard Maintainer: [BINEPAD]
+* Hardware Supported: BN003 PCB (ATmega32U4)
+* Hardware Availability: [Interest Check](https://www.binepad.com/bn003)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make binepad/bn003:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/binepad/bn003/rules.mk

@@ -0,0 +1,22 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output

keyboards/boardsource/4x12/keymaps/via/keymap.c

@@ -0,0 +1,36 @@
+#include QMK_KEYBOARD_H
+
+enum layers {
+    _MAIN,
+    _RAISE,
+    _LOWER,
+};
+
+// Readability keycodes
+#define LOWER   MO(_LOWER)
+#define RAISE   MO(_RAISE)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_MAIN] = LAYOUT_ortho_4x12(
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+    KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT ,
+    KC_PIPE, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+  ),
+
+  [_RAISE] = LAYOUT_ortho_4x12(
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR,    KC_ASTR,    KC_LPRN, KC_RPRN, KC_BSPC,
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS,    KC_PLUS,    KC_LCBR, KC_RCBR, KC_PIPE,
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END,  _______,
+  RESET,   _______, _______, _______, _______, _______, _______, _______,    KC_MNXT,    KC_VOLD, KC_VOLU, KC_MPLY
+  ),
+
+  [_LOWER] = LAYOUT_ortho_4x12(
+ KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+ KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
+ _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
+  )
+
+};

keyboards/boardsource/4x12/keymaps/via/readme.md

@@ -0,0 +1,5 @@
+# The via keymap for boardsource 4x12 ortholinear keybaoard
+
+This folder contains the [VIA](https://caniusevia.com/) configuration for the boardsource 4x12 ortholinear keybaoard
+
+Maintained by: [gwillad](https://github.com/gwillad)

keyboards/boardsource/4x12/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/boardsource/5x12/config.h

@@ -3,8 +3,8 @@
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xF7E0
-#define PRODUCT_ID      0x0412
+#define VENDOR_ID       0x4273 // "Bs" - Boardsource
+#define PRODUCT_ID      0x0512
 #define DEVICE_VER      0x0000
 #define MANUFACTURER    Boardsource
 #define PRODUCT         5x12

keyboards/boardsource/5x12/keymaps/via/keymap.c

@@ -0,0 +1,46 @@
+#include QMK_KEYBOARD_H
+
+enum layers {
+    _MAIN,
+    _RAISE,
+    _LOWER,
+};
+
+// Readability keycodes
+#define LOWER   MO(_LOWER)
+#define RAISE   MO(_RAISE)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_MAIN] = LAYOUT_ortho_5x12(
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_DEL,
+  KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,
+  KC_PIPE, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+  ),
+
+  [_RAISE] = LAYOUT_ortho_5x12(
+  KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,
+  KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL,
+  _______, KC_4,    KC_5,    KC_6,    KC_PLUS, KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, _______,
+  KC_ENT,  KC_7,    KC_8,    KC_9,    KC_MINS, KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, KC_MUTE, _______, KC_BSLS,
+  RESET,   _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
+  ),
+
+  [_LOWER] = LAYOUT_ortho_5x12(
+  KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_UP,   _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______,
+  KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  RESET,   _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
+  ),
+  [3] = LAYOUT_ortho_5x12(
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  )
+
+};

keyboards/boardsource/5x12/keymaps/via/readme.md

@@ -0,0 +1,5 @@
+# The via keymap for boardsource 5x12 ortholinear keyboard
+
+This folder contains the [VIA](https://caniusevia.com/) configuration for the boardsource 5x12 ortholinear keyboard
+
+Maintained by: [gwillad](https://github.com/gwillad)

keyboards/boardsource/5x12/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/claw44/ssd1306.c

@@ -10,6 +10,8 @@
 #include "sendchar.h"
 #include "timer.h"
 
+struct CharacterMatrix display;
+
 extern const unsigned char font[] PROGMEM;
 
 // Set this to 1 to help diagnose early startup problems

keyboards/claw44/ssd1306.h

@@ -65,7 +65,7 @@ struct CharacterMatrix {
   bool dirty;
 };
 
-struct CharacterMatrix display;
+extern struct CharacterMatrix display;
 
 bool iota_gfx_init(bool rotate);
 void iota_gfx_task(void);

keyboards/clueboard/66/keymaps/badger/keymap.c

@@ -0,0 +1,53 @@
+/*
+Copyright 2020 Dan White <opensource@bluetufa.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "badger.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QWERTY_LINUX]      = LAYOUT_66_ansi(\
+      KC_GRV,    KC_1,     KC_2,     KC_3,     KC_4,     KC_5,     KC_6,     KC_7,     KC_8,     KC_9,     KC_0,     KC_MINS,   KC_EQL,   KC_BSPC,  KC_HOME, \
+      KC_TAB,    KC_Q,     KC_W,     KC_E,     KC_R,     KC_T,     KC_Y,     KC_U,     KC_I,     KC_O,     KC_P,     KC_LBRC,   KC_RBRC,  KC_BSLS,  KC_END, \
+      MOVE,      KC_A,     KC_S,     KC_D,     KC_F,     KC_G,     KC_H,     KC_J,     KC_K,     KC_L,     KC_SCLN,  KC_QUOT,   KC_ENT, \
+      KC_LSFT,   KC_Z,     KC_X,     KC_C,     KC_V,     KC_B,     KC_N,     KC_M,     KC_COMM,  KC_DOT,   KC_SLSH,  KC_RSFT,   KC_UP,  \
+      KC_LCTL,   KC_LALT,  KC_LGUI,  KC_SPC,   ADJUST,   KC_RGUI,  KC_LALT,  KC_LEFT,  KC_DOWN,  KC_RGHT),
+
+  [_MOVE_LINUX]        = LAYOUT_66_ansi(\
+     KC_ESC,     VD_1,     VD_2,     VD_3,     KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   IJ_UP,     IJ_DOWN,  KC_DEL,   KC_PGUP, \
+     _______,    IJ_STEP,  IJ_INTO,  IJ_OUT,   IJ_RUN,   IJ_STOP,  IJ_OUT,   KC_PGUP,  KC_HOME,  KC_END,   KC_PGDN,  IJ_BACK,   IJ_FWD,   KC_INS,   KC_PGDN, \
+     _______,    WM_LH,    WM_UH,    WM_RH,    WD_FRWD,  MAC_POP,  KC_LEFT,  KC_DOWN,  KC_UP,    KC_RGHT,  CS_RIGHT, CS_DOWN,   _______, \
+     _______,    MM_UH,    MM_BH,    MAC_CPY,  MAC_PST,  WD_BACK,  KC_MNXT,  IJ_REN,   IJ_IMPL,  IJ_DECL,  IJ_USAG,  _______,   KC_BRIU, \
+     _______,    _______,  _______,  _______,  _______,  _______,  _______,  KC_HOME,  KC_BRID,  KC_END),
+
+  [_QWERTY_MAC]  = LAYOUT_66_ansi(\
+      KC_GRV,    KC_1,     KC_2,     KC_3,     KC_4,     KC_5,     KC_6,     KC_7,     KC_8,     KC_9,     KC_0,     KC_MINS,   KC_EQL,   KC_BSPC,  KC_HOME, \
+      KC_TAB,    KC_Q,     KC_W,     KC_E,     KC_R,     KC_T,     KC_Y,     KC_U,     KC_I,     KC_O,     KC_P,     KC_LBRC,   KC_RBRC,  KC_BSLS,  KC_END, \
+      MOVE_MAC,  KC_A,     KC_S,     KC_D,     KC_F,     KC_G,     KC_H,     KC_J,     KC_K,     KC_L,     KC_SCLN,  KC_QUOT,   KC_ENT, \
+      KC_LSFT,   KC_Z,     KC_X,     KC_C,     KC_V,     KC_B,     KC_N,     KC_M,     KC_COMM,  KC_DOT,   KC_SLSH,  KC_RSFT,   KC_UP,  \
+      KC_LCTL,   KC_LALT,  KC_LGUI,  KC_SPC,   ADJUST,   KC_RGUI,  KC_LALT,  KC_LEFT,  KC_DOWN,  KC_RGHT),
+
+  [_MOVE_MAC]    = LAYOUT_66_ansi(\
+     KC_ESC,     M_VD1,    M_VD2,    M_VD3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   IJ_UP,     IJ_DOWN,  KC_DEL,   KC_PGUP, \
+     _______,    IJ_STEP,  IJ_INTO,  IJ_OUT,   IJ_RUN,   IJ_STOP,  IJ_OUT,   KC_PGUP,  KC_HOME,  KC_END,   KC_PGDN,  IJ_BACK,   IJ_FWD,   KC_INS,   KC_PGDN, \
+     _______,    MM_LH,    MM_MAX,   MM_RH,    WD_FRWD,  MAC_POP,  KC_LEFT,  KC_DOWN,  KC_UP,    KC_RGHT,  CM_RIGHT, CM_DOWN,   _______, \
+     _______,    MM_UH,    MM_BH,    MAC_CPY,  MAC_PST,  WD_BACK,  KC_MNXT,  IJ_REN,   IJ_IMPL,  IJ_DECL,  IJ_USAG,  _______,   KC_BRIU, \
+     _______,    _______,  _______,  _______,  _______,  _______,  _______,  KC_HOME,  KC_BRID,  KC_END),
+
+  [_ADJUST]      = LAYOUT_66_ansi(\
+      KC_ESC,    KC_F1,    KC_F2,    KC_F3,    KC_F4,     KC_F5,   KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,    KC_F12,   KC_DEL,   KC_VOLU, \
+      _______,   NK_ON,    NK_OFF,   EEP_RST,  RESET,     KC_MSTP, KC_MPLY,  KC_PGUP,  KC_HOME,  KC_END,   KC_PGDN,  AG_SWAP,   AG_NORM,  KC_INS,   KC_VOLD, \
+      _______,   GE_SWAP,  GE_NORM,  DEBUG,    AG_SWAP,   AG_NORM, KC_LEFT,  KC_DOWN,  KC_UP,    KC_RGHT,  _______,  _______,   _______, \
+      _______,   DF_1,     DF_2,     KC_CAPS,  _______,   KC_MPRV, KC_MNXT,  KC_MUTE,  KC_WBAK,  KC_WFWD,  _______,  _______,   KC_BRIU, \
+      _______,   _______,  _______,  _______,  _______,   _______, _______,  KC_HOME,  KC_BRID,  KC_END)
+};
+

keyboards/comet46/ssd1306.c

@@ -10,6 +10,8 @@
 #include "sendchar.h"
 #include "timer.h"
 
+struct CharacterMatrix display;
+
 extern const unsigned char font[] PROGMEM;
 
 // Set this to 1 to help diagnose early startup problems

keyboards/comet46/ssd1306.h

@@ -65,7 +65,7 @@ struct CharacterMatrix {
   bool dirty;
 };
 
-struct CharacterMatrix display;
+extern struct CharacterMatrix display;
 
 bool iota_gfx_init(bool rotate);
 void iota_gfx_task(void);

keyboards/converter/adb_usb/adb_usb.h

@@ -56,7 +56,7 @@ Ported to QMK by Peter Roe <pete@13bit.me>
     { K38,   K39,   K3A,   K3B, K3C,   K3D,   K3E,   KC_NO, }, \
     { KC_NO, K41,   KC_NO, K43, KC_NO, K45,   KC_NO, K47    }, \
     { KC_NO, KC_NO, KC_NO, K4B, K4C,   KC_NO, K4E,   KC_NO, }, \
-    { KC_NO, KC_NO, K52,   K53, K54,   K55,   K56,   K57    }, \
+    { KC_NO, K51,   K52,   K53, K54,   K55,   K56,   K57    }, \
     { K58,   K59,   KC_NO, K5B, K5C,   KC_NO, KC_NO, KC_NO, }, \
     { K60,   K61,   K62,   K63, K64,   K65,   KC_NO, K67    }, \
     { KC_NO, K69,   KC_NO, K6B, KC_NO, K6D,   KC_NO, K6F    }, \

keyboards/crkbd/config.h

@@ -1,6 +1,6 @@
 /*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-Copyright 2015 Jack Humbert
+Copyright 2019 @foostan
+Copyright 2020 Drashna Jaelre <@drashna>
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -19,9 +19,55 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #pragma once
 
 #include "config_common.h"
-#include <serial_config.h>
 
-#define USE_I2C
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x4653
+#define PRODUCT_ID      0x0001
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    foostan
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 6
+#define MATRIX_ROW_PINS { D4, C6, D7, E6 }
+
+// wiring of each half
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3 }
+// #define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+// #define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+//#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+//#define LOCKING_RESYNC_ENABLE
+
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
 #define USE_SERIAL
 
 #define NO_ACTION_MACRO

keyboards/crkbd/crkbd.c

@@ -1,9 +1,19 @@
-#include "crkbd.h"
+/*
+Copyright 2019 @foostan
+Copyright 2020 Drashna Jaelre <@drashna>
 
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-#ifdef SSD1306OLED
-  return process_record_gfx(keycode,record) && process_record_user(keycode, record);
-#else
-  return process_record_user(keycode, record);
-#endif
-}
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "crkbd.h"

keyboards/crkbd/crkbd.h

@@ -1,5 +1,24 @@
+/*
+Copyright 2019 @foostan
+Copyright 2020 Drashna Jaelre <@drashna>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
 #pragma once
 
 #ifdef KEYBOARD_crkbd_rev1
-  #include "rev1.h"
+#    include "rev1.h"
 #endif
+
+#include "quantum.h"

keyboards/crkbd/keymaps/default/keymap.c

@@ -1,3 +1,21 @@
+/*
+Copyright 2019 @foostan
+Copyright 2020 Drashna Jaelre <@drashna>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
 #include QMK_KEYBOARD_H
 
 

keyboards/crkbd/keymaps/oled_sample/config.h

@@ -0,0 +1,48 @@
+/*
+Copyright 2019 @foostan
+Copyright 2020 Drashna Jaelre <@drashna>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+
+
+#pragma once
+
+//#define USE_MATRIX_I2C
+#ifdef KEYBOARD_crkbd_rev1_common
+#    undef USE_I2C
+#    define USE_SERIAL
+#endif
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
+
+#define USE_SERIAL_PD2
+
+#define TAPPING_FORCE_HOLD
+#define TAPPING_TERM 100
+
+#undef RGBLED_NUM
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 27
+#define RGBLIGHT_LIMIT_VAL 120
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
+
+#define OLED_FONT_H "keyboards/crkbd/lib/glcdfont.c"

keyboards/crkbd/keymaps/oled_sample/keymap.c

@@ -0,0 +1,208 @@
+/*
+Copyright 2019 @foostan
+Copyright 2020 Drashna Jaelre <@drashna>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+enum crkbd_layers {
+    _QWERTY,
+    _LOWER,
+    _RAISE,
+    _ADJUST,
+};
+
+
+#define RAISE MO(_RAISE)
+#define LOWER MO(_LOWER)
+#define CTLTB CTL_T(KC_TAB)
+#define GUIEI GUI_T(KC_LANG2)
+#define ALTKN ALT_T(KC_LANG1)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QWERTY] = LAYOUT(
+    KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,     KC_T,                      KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+    CTLTB,   KC_A,    KC_S,    KC_D,    KC_F,     KC_G,                      KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,     KC_B,                      KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+                                        GUIEI,    LOWER,   KC_SPC,  KC_ENT,  RAISE,   ALTKN
+  ),
+
+  [_LOWER] = LAYOUT(
+    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,     KC_5,                      KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+    CTLTB,   KC_F1,   KC_F2,   KC_F3,   KC_F4,    KC_F5,                     KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  XXXXXXX,
+    KC_LSFT, KC_F11,  KC_F12,  KC_F13,  KC_F14,   KC_F15,                    KC_F16,  KC_F17,  KC_F18,  KC_F19,  KC_F20,  XXXXXXX,
+                                        GUIEI,    LOWER,   KC_SPC,  KC_ENT,  RAISE,   ALTKN
+  ),
+
+  [_RAISE] = LAYOUT(
+    KC_ESC,  KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,                   KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC,
+    CTLTB,   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                   KC_MINS, KC_EQL,  KC_LCBR, KC_RCBR, KC_PIPE, KC_GRV,
+    KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                   KC_UNDS, KC_PLUS, KC_LBRC, KC_RBRC, KC_BSLS, KC_TILD,
+                                        GUIEI,   LOWER,   KC_SPC,  KC_ENT,  RAISE,   ALTKN
+
+  ),
+
+  [_ADJUST] = LAYOUT(
+    RESET,   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+    RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX, XXXXXXX,                   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+    RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, XXXXXXX,                   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+                                        GUIEI,   LOWER,   KC_SPC,  KC_ENT,  RAISE,   ALTKN
+  )
+};
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+    state = update_tri_layer_state(state, _RAISE, _LOWER, _ADJUST);
+    return state;
+}
+
+
+#ifdef OLED_DRIVER_ENABLE
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+    if (is_keyboard_master()) {
+        return OLED_ROTATION_270;
+    } else {
+        return rotation;
+    }
+}
+
+void render_crkbd_logo(void) {
+    static const char PROGMEM crkbd_logo[] = {
+        0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94,
+        0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb0, 0xb1, 0xb2, 0xb3, 0xb4,
+        0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4,
+        0};
+    oled_write_P(crkbd_logo, false);
+}
+
+#    define KEYLOG_LEN 5
+char     keylog_str[KEYLOG_LEN] = {};
+uint8_t  keylogs_str_idx        = 0;
+uint16_t log_timer              = 0;
+
+const char code_to_name[60] = {
+    ' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f',
+    'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p',
+    'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z',
+    '1', '2', '3', '4', '5', '6', '7', '8', '9', '0',
+    'R', 'E', 'B', 'T', '_', '-', '=', '[', ']', '\\',
+    '#', ';', '\'', '`', ',', '.', '/', ' ', ' ', ' '};
+
+void add_keylog(uint16_t keycode) {
+    if ((keycode >= QK_MOD_TAP && keycode <= QK_MOD_TAP_MAX) || (keycode >= QK_LAYER_TAP && keycode <= QK_LAYER_TAP_MAX)) {
+        keycode = keycode & 0xFF;
+    }
+
+    for (uint8_t i = KEYLOG_LEN - 1; i > 0; i--) {
+        keylog_str[i] = keylog_str[i - 1];
+    }
+    if (keycode < 60) {
+        keylog_str[0] = code_to_name[keycode];
+    }
+    keylog_str[KEYLOG_LEN - 1] = 0;
+
+    log_timer = timer_read();
+}
+
+void update_log(void) {
+    if (timer_elapsed(log_timer) > 750) {
+        add_keylog(0);
+    }
+}
+
+void render_keylogger_status(void) {
+    oled_write_P(PSTR("KLogr"), false);
+    oled_write(keylog_str, false);
+}
+
+void render_default_layer_state(void) {
+    oled_write_P(PSTR("Lyout"), false);
+    switch (get_highest_layer(default_layer_state)) {
+        case _QWERTY:
+            oled_write_P(PSTR(" QRTY"), false);
+            break;
+    }
+}
+
+void render_layer_state(void) {
+    oled_write_P(PSTR("LAYER"), false);
+    oled_write_P(PSTR("Lower"), layer_state_is(_LOWER));
+    oled_write_P(PSTR("Raise"), layer_state_is(_RAISE));
+}
+
+void render_keylock_status(uint8_t led_usb_state) {
+    oled_write_P(PSTR("Lock:"), false);
+    oled_write_P(PSTR(" "), false);
+    oled_write_P(PSTR("N"), led_usb_state & (1 << USB_LED_NUM_LOCK));
+    oled_write_P(PSTR("C"), led_usb_state & (1 << USB_LED_CAPS_LOCK));
+    oled_write_ln_P(PSTR("S"), led_usb_state & (1 << USB_LED_SCROLL_LOCK));
+}
+
+void render_mod_status(uint8_t modifiers) {
+    oled_write_P(PSTR("Mods:"), false);
+    oled_write_P(PSTR(" "), false);
+    oled_write_P(PSTR("S"), (modifiers & MOD_MASK_SHIFT));
+    oled_write_P(PSTR("C"), (modifiers & MOD_MASK_CTRL));
+    oled_write_P(PSTR("A"), (modifiers & MOD_MASK_ALT));
+    oled_write_P(PSTR("G"), (modifiers & MOD_MASK_GUI));
+}
+
+void render_bootmagic_status(void) {
+    /* Show Ctrl-Gui Swap options */
+    static const char PROGMEM logo[][2][3] = {
+        {{0x97, 0x98, 0}, {0xb7, 0xb8, 0}},
+        {{0x95, 0x96, 0}, {0xb5, 0xb6, 0}},
+    };
+    oled_write_P(PSTR("BTMGK"), false);
+    oled_write_P(PSTR(" "), false);
+    oled_write_P(logo[0][0], !keymap_config.swap_lctl_lgui);
+    oled_write_P(logo[1][0], keymap_config.swap_lctl_lgui);
+    oled_write_P(PSTR(" "), false);
+    oled_write_P(logo[0][1], !keymap_config.swap_lctl_lgui);
+    oled_write_P(logo[1][1], keymap_config.swap_lctl_lgui);
+    oled_write_P(PSTR(" NKRO"), keymap_config.nkro);
+}
+
+void render_status_main(void) {
+    /* Show Keyboard Layout  */
+    render_default_layer_state();
+    render_keylock_status(host_keyboard_leds());
+    render_mod_status(get_mods());
+    render_bootmagic_status();
+
+    render_keylogger_status();
+}
+
+void oled_task_user(void) {
+    update_log();
+    if (is_master) {
+        render_status_main();  // Renders the current keyboard state (layer, lock, caps, scroll, etc)
+    } else {
+        render_crkbd_logo();
+    }
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    if (record->event.pressed) {
+        add_keylog(keycode);
+    }
+    return true;
+}
+#endif

keyboards/crkbd/keymaps/oled_sample/rules.mk

@@ -0,0 +1,7 @@
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight.
+OLED_DRIVER_ENABLE = yes

keyboards/crkbd/rev1/common/common.c

@@ -0,0 +1,21 @@
+/*
+Copyright 2019 @foostan
+Copyright 2020 Drashna Jaelre <@drashna>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "common.h"
+
+uint8_t is_master;

keyboards/crkbd/rev1/common/common.h

@@ -0,0 +1,24 @@
+/*
+Copyright 2019 @foostan
+Copyright 2020 Drashna Jaelre <@drashna>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "rev1.h"
+
+#define has_usb() is_keyboard_master()
+extern uint8_t is_master;

keyboards/crkbd/rev1/common/config.h

@@ -0,0 +1,30 @@
+/*
+Copyright 2019 @foostan
+Copyright 2020 Drashna Jaelre <@drashna>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#define PRODUCT         Corne Keyboard Rev.1 (Split Common)
+
+#define USE_SERIAL
+#define SOFT_SERIAL_PIN D2
+
+#ifdef RGB_MATRIX_ENABLE
+#    define RGB_MATRIX_SPLIT { 27, 27 }
+#endif
+
+#define DIODE_DIRECTION COL2ROW

keyboards/crkbd/rev1/common/keymaps/via/config.h

@@ -0,0 +1,46 @@
+/*
+Copyright 2019 @foostan
+Copyright 2020 Drashna Jaelre <@drashna>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+
+
+#pragma once
+
+//#define USE_MATRIX_I2C
+#ifdef KEYBOARD_crkbd_rev1_legacy
+#    undef USE_I2C
+#    define USE_SERIAL
+#endif
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
+
+#define USE_SERIAL_PD2
+
+
+#undef RGBLED_NUM
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 27
+#define RGBLIGHT_LIMIT_VAL 120
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
+
+#define OLED_FONT_H "keyboards/crkbd/lib/glcdfont.c"

keyboards/crkbd/rev1/common/keymaps/via/keymap.c

@@ -0,0 +1,193 @@
+/*
+Copyright 2019 @foostan
+Copyright 2020 Drashna Jaelre <@drashna>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT_split_3x6_3( \
+  //,-----------------------------------------------------.                    ,-----------------------------------------------------.
+       KC_TAB,    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                         KC_Y,    KC_U,    KC_I,    KC_O,   KC_P,  KC_BSPC,
+  //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
+      KC_LCTL,    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,                         KC_H,    KC_J,    KC_K,    KC_L, KC_SCLN, KC_QUOT,
+  //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
+      KC_LSFT,    KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,                         KC_N,    KC_M, KC_COMM,  KC_DOT, KC_SLSH,  KC_ESC,
+  //|--------+--------+--------+--------+--------+--------+--------|  |--------+--------+--------+--------+--------+--------+--------|
+                                          KC_LGUI, FN_MO13,  KC_SPC,     KC_ENT, FN_MO23, KC_RALT
+                                      //`--------------------------'  `--------------------------'
+
+  ),
+
+  [1] = LAYOUT_split_3x6_3( \
+  //,-----------------------------------------------------.                    ,-----------------------------------------------------.
+       KC_TAB,    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                         KC_6,    KC_7,    KC_8,    KC_9,    KC_0, KC_BSPC,
+  //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
+      KC_LCTL, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                      KC_LEFT, KC_DOWN,   KC_UP,KC_RIGHT, XXXXXXX, XXXXXXX,
+  //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
+      KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+  //|--------+--------+--------+--------+--------+--------+--------|  |--------+--------+--------+--------+--------+--------+--------|
+                                          KC_LGUI, _______,  KC_SPC,     KC_ENT, _______, KC_RALT\
+                                      //`--------------------------'  `--------------------------'
+  ),
+
+  [2] = LAYOUT_split_3x6_3( \
+  //,-----------------------------------------------------.                    ,-----------------------------------------------------.
+       KC_TAB, KC_EXLM,   KC_AT, KC_HASH,  KC_DLR, KC_PERC,                      KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC,
+  //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
+      KC_LCTL, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                      KC_MINS,  KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS,  KC_GRV,
+  //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
+      KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                      KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, KC_TILD,
+  //|--------+--------+--------+--------+--------+--------+--------|  |--------+--------+--------+--------+--------+--------+--------|
+                                          KC_LGUI, _______,  KC_SPC,     KC_ENT, _______, KC_RALT
+                                      //`--------------------------'  `--------------------------'
+  ),
+
+  [3] = LAYOUT_split_3x6_3( \
+  //,-----------------------------------------------------.                    ,-----------------------------------------------------.
+        RESET, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,\
+  //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
+      RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX, XXXXXXX,                      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,\
+  //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
+      RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, XXXXXXX,                      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,\
+  //|--------+--------+--------+--------+--------+--------+--------|  |--------+--------+--------+--------+--------+--------+--------|
+                                          KC_LGUI, _______,  KC_SPC,     KC_ENT, _______, KC_RALT\
+                                      //`--------------------------'  `--------------------------'
+  )
+};
+
+#ifdef OLED_DRIVER_ENABLE
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+  if (!is_master) {
+    return OLED_ROTATION_180;  // flips the display 180 degrees if offhand
+  }
+  return rotation;
+}
+
+#define L_BASE 0
+#define L_LOWER 2
+#define L_RAISE 4
+#define L_ADJUST 8
+
+void oled_render_layer_state(void) {
+    oled_write_P("Layer: ", false);
+    switch (layer_state) {
+        case L_BASE:
+            oled_write_ln_P("Default", false);
+            break;
+        case L_LOWER:
+            oled_write_ln_P("Lower", false);
+            break;
+        case L_RAISE:
+            oled_write_ln_P("Raise", false);
+            break;
+        case L_ADJUST:
+        case L_ADJUST|L_LOWER:
+        case L_ADJUST|L_RAISE:
+        case L_ADJUST|L_LOWER|L_RAISE:
+            oled_write_ln_P("Adjust", false);
+            break;
+    }
+}
+
+
+char keylog_str[24] = {};
+char keylogs_str[21] = {};
+int keylogs_str_idx = 0;
+
+const char code_to_name[60] = {
+    ' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f',
+    'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p',
+    'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z',
+    '1', '2', '3', '4', '5', '6', '7', '8', '9', '0',
+    'R', 'E', 'B', 'T', '_', '-', '=', '[', ']', '\\',
+    '#', ';', '\'', '`', ',', '.', '/', ' ', ' ', ' '};
+
+void set_keylog(uint16_t keycode, keyrecord_t *record) {
+  char name = ' ';
+    if ((keycode >= QK_MOD_TAP && keycode <= QK_MOD_TAP_MAX) ||
+        (keycode >= QK_LAYER_TAP && keycode <= QK_LAYER_TAP_MAX)) { keycode = keycode & 0xFF; }
+  if (keycode < 60) {
+    name = code_to_name[keycode];
+  }
+
+  // update keylog
+  snprintf(keylog_str, sizeof(keylog_str), "%dx%d, k%2d : %c",
+           record->event.key.row, record->event.key.col,
+           keycode, name);
+
+  // update keylogs
+  if (keylogs_str_idx == sizeof(keylogs_str) - 1) {
+    keylogs_str_idx = 0;
+    for (int i = 0; i < sizeof(keylogs_str) - 1; i++) {
+      keylogs_str[i] = ' ';
+    }
+  }
+
+  keylogs_str[keylogs_str_idx] = name;
+  keylogs_str_idx++;
+}
+
+void oled_render_keylog(void) {
+    oled_write(keylog_str, false);
+}
+void oled_render_keylogs(void) {
+    oled_write(keylogs_str, false);
+}
+
+void render_bootmagic_status(bool status) {
+    /* Show Ctrl-Gui Swap options */
+    static const char PROGMEM logo[][2][3] = {
+        {{0x97, 0x98, 0}, {0xb7, 0xb8, 0}},
+        {{0x95, 0x96, 0}, {0xb5, 0xb6, 0}},
+    };
+    if (status) {
+        oled_write_ln_P(logo[0][0], false);
+        oled_write_ln_P(logo[0][1], false);
+    } else {
+        oled_write_ln_P(logo[1][0], false);
+        oled_write_ln_P(logo[1][1], false);
+    }
+}
+
+void oled_render_logo(void) {
+    static const char PROGMEM crkbd_logo[] = {
+        0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94,
+        0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb0, 0xb1, 0xb2, 0xb3, 0xb4,
+        0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4,
+        0};
+    oled_write_P(crkbd_logo, false);
+}
+
+void oled_task_user(void) {
+    if (is_master) {
+        oled_render_layer_state();
+        oled_render_keylog();
+        // oled_render_keylogs();
+        // oled_renger_bootmagic_icon(keymap_config.swap_lalt_lgui);
+    } else {
+        oled_render_logo();
+    }
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  if (record->event.pressed) {
+    set_keylog(keycode, record);
+    // set_timelog();
+  }
+  return true;
+}
+#endif // OLED_DRIVER_ENABLE

keyboards/crkbd/rev1/common/keymaps/via/rules.mk

@@ -0,0 +1,5 @@
+MOUSEKEY_ENABLE     = no     # Mouse keys
+RGBLIGHT_ENABLE     = yes    # Enable WS2812 RGB underlight.
+VIA_ENABLE          = yes         # Enable VIA
+OLED_DRIVER_ENABLE  = yes
+LTO_ENABLE          = yes

keyboards/crkbd/rev1/common/rules.mk

@@ -0,0 +1,2 @@
+SPLIT_KEYBOARD = yes
+SPLIT_TRANSPORT = mirror    # for when Split Mirroring drops, it will maintain mirroring functionality

keyboards/crkbd/rev1/common/ssd1306.c

@@ -0,0 +1,360 @@
+#ifdef SSD1306OLED
+
+#include "ssd1306.h"
+#include "i2c_master.h"
+#include <string.h>
+#include "print.h"
+#ifdef ADAFRUIT_BLE_ENABLE
+#include "adafruit_ble.h"
+#endif
+#ifdef PROTOCOL_LUFA
+#include "lufa.h"
+#endif
+#include "sendchar.h"
+#include "timer.h"
+
+struct CharacterMatrix display;
+
+extern const unsigned char font[] PROGMEM;
+
+#ifndef OLED_BLANK_CHAR
+#define OLED_BLANK_CHAR ' '
+#endif
+
+#ifndef OLED_BITS_FILTER
+#define OLED_BITS_FILTER
+#endif
+
+// Set this to 1 to help diagnose early startup problems
+// when testing power-on with ble.  Turn it off otherwise,
+// as the latency of printing most of the debug info messes
+// with the matrix scan, causing keys to drop.
+#define DEBUG_TO_SCREEN 0
+
+//static uint16_t last_battery_update;
+//static uint32_t vbat;
+//#define BatteryUpdateInterval 10000 /* milliseconds */
+
+// 'last_flush' is declared as uint16_t,
+// so this must be less than 65535
+#ifndef ScreenOffInterval
+#define ScreenOffInterval 60000 /* milliseconds */
+#endif
+
+#if DEBUG_TO_SCREEN
+static uint8_t displaying;
+#endif
+static uint16_t last_flush;
+
+static bool force_dirty = true;
+
+// Write command sequence.
+// Returns true on success.
+static inline bool _send_cmd1(uint8_t cmd) {
+  bool res = false;
+
+  if (i2c_start(SSD1306_ADDRESS, 100)) {
+    xprintf("failed to start write to %d\n", SSD1306_ADDRESS);
+    goto done;
+  }
+
+  if (i2c_write(0x0 /* command byte follows */, 100)) {
+    print("failed to write control byte\n");
+
+    goto done;
+  }
+
+  if (i2c_write(cmd, 100)) {
+    xprintf("failed to write command %d\n", cmd);
+    goto done;
+  }
+  res = true;
+done:
+  i2c_stop();
+  return res;
+}
+
+#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;}
+#define send_cmds(c) if (!_send_cmds(c,sizeof(c))) {goto done;}
+#define cmd1(X) X
+#define cmd2(X,Y) X,Y
+#define cmd3(X,Y,Z) X,Y,Z
+
+static bool _send_cmds(const uint8_t* p,uint8_t sz) {
+  for(uint8_t i=sz;i;i--) {
+    send_cmd1( pgm_read_byte(p++) );
+  }
+  return true;
+done:
+  return false;
+}
+
+#define SEND_CMDS(...) {static const uint8_t _cmds[] PROGMEM = { __VA_ARGS__,0 };send_cmds(_cmds);}
+
+static void clear_display(void) {
+  matrix_clear(&display);
+
+  // Clear all of the display bits (there can be random noise
+  // in the RAM on startup)
+  SEND_CMDS(
+    cmd3(PageAddr, 0, (DisplayHeight / 8) - 1),
+    cmd3(ColumnAddr, 0, DisplayWidth - 1)
+  );
+
+  if (i2c_start(SSD1306_ADDRESS, 100)) {
+    goto done;
+  }
+  if (i2c_write(0x40, 100)) {
+    // Data mode
+    goto done;
+  }
+  for (uint8_t row = MatrixRows;row; row--) {
+    for (uint8_t col = DisplayWidth; col; col--) {
+      i2c_write(0, 100);
+    }
+  }
+
+  display.dirty = false;
+
+done:
+  i2c_stop();
+}
+
+#if DEBUG_TO_SCREEN
+#undef sendchar
+static int8_t capture_sendchar(uint8_t c) {
+  sendchar(c);
+  iota_gfx_write_char(c);
+
+  if (!displaying) {
+    iota_gfx_flush();
+  }
+  return 0;
+}
+#endif
+
+bool iota_gfx_init(bool rotate) {
+  bool success = false;
+
+  i2c_init();
+  SEND_CMDS(
+    cmd1(DisplayOff),
+    cmd2(SetDisplayClockDiv, 0x80),
+    cmd2(SetMultiPlex, DisplayHeight - 1),
+    cmd2(SetDisplayOffset, 0),
+    cmd1(SetStartLine | 0x0),
+    cmd2(SetChargePump, 0x14 /* Enable */),
+    cmd2(SetMemoryMode, 0 /* horizontal addressing */)
+  );
+
+  if(rotate){
+    // the following Flip the display orientation 180 degrees
+  SEND_CMDS(
+    cmd1(SegRemap),
+    cmd1(ComScanInc)
+  );
+  }else{
+    // Flips the display orientation 0 degrees
+  SEND_CMDS(
+      cmd1(SegRemap | 0x1),
+      cmd1(ComScanDec)
+    );
+  }
+
+  SEND_CMDS(
+#ifdef SSD1306_128X64
+	cmd2(SetComPins, 0x12),
+#else
+	cmd2(SetComPins, 0x2),
+#endif
+    cmd2(SetContrast, 0x8f),
+    cmd2(SetPreCharge, 0xf1),
+    cmd2(SetVComDetect, 0x40),
+    cmd1(DisplayAllOnResume),
+    cmd1(NormalDisplay),
+    cmd1(DeActivateScroll),
+    cmd1(DisplayOn),
+
+    cmd2(SetContrast, 0) // Dim
+  );
+
+  clear_display();
+
+  success = true;
+
+  iota_gfx_flush();
+
+#if DEBUG_TO_SCREEN
+  print_set_sendchar(capture_sendchar);
+#endif
+
+done:
+  return success;
+}
+
+bool iota_gfx_off(void) {
+  bool success = false;
+
+  send_cmd1(DisplayOff);
+  success = true;
+
+done:
+  return success;
+}
+
+bool iota_gfx_on(void) {
+  bool success = false;
+
+  send_cmd1(DisplayOn);
+  success = true;
+
+done:
+  return success;
+}
+
+void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) {
+  *matrix->cursor = c;
+  ++matrix->cursor;
+
+  if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) {
+    // We went off the end; scroll the display upwards by one line
+    memmove(&matrix->display[0], &matrix->display[1],
+            MatrixCols * (MatrixRows - 1));
+    matrix->cursor = &matrix->display[MatrixRows - 1][0];
+    memset(matrix->cursor, OLED_BLANK_CHAR, MatrixCols);
+  }
+}
+
+void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) {
+  matrix->dirty = true;
+
+  if (c == '\n') {
+    // Clear to end of line from the cursor and then move to the
+    // start of the next line
+    uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols;
+
+    while (cursor_col++ < MatrixCols) {
+      matrix_write_char_inner(matrix, OLED_BLANK_CHAR);
+    }
+    return;
+  }
+
+  matrix_write_char_inner(matrix, c);
+}
+
+void iota_gfx_write_char(uint8_t c) {
+  matrix_write_char(&display, c);
+}
+
+void matrix_write(struct CharacterMatrix *matrix, const char *data) {
+  while (*data) {
+    matrix_write_char(matrix, *data);
+    ++data;
+  }
+}
+
+void matrix_write_ln(struct CharacterMatrix *matrix, const char *data) {
+  matrix_write(matrix, data);
+  matrix_write(matrix, "\n");
+}
+
+void iota_gfx_write(const char *data) {
+  matrix_write(&display, data);
+}
+
+void matrix_write_P(struct CharacterMatrix *matrix, const char *data) {
+  while (true) {
+    uint8_t c = pgm_read_byte(data);
+    if (c == 0) {
+      return;
+    }
+    matrix_write_char(matrix, c);
+    ++data;
+  }
+}
+
+void iota_gfx_write_P(const char *data) {
+  matrix_write_P(&display, data);
+}
+
+void matrix_clear(struct CharacterMatrix *matrix) {
+  memset(matrix->display, OLED_BLANK_CHAR, sizeof(matrix->display));
+  matrix->cursor = &matrix->display[0][0];
+  matrix->dirty = true;
+}
+
+void iota_gfx_clear_screen(void) {
+  matrix_clear(&display);
+}
+
+void matrix_render(struct CharacterMatrix *matrix) {
+  last_flush = timer_read();
+  iota_gfx_on();
+#if DEBUG_TO_SCREEN
+  ++displaying;
+#endif
+
+  // Move to the home position
+  SEND_CMDS(
+    cmd3(PageAddr, 0, MatrixRows - 1),
+    cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1)
+  );
+
+  if (i2c_write(SSD1306_ADDRESS, 100)) {
+    goto done;
+  }
+  if (i2c_write(0x40, 100)) {
+    // Data mode
+    goto done;
+  }
+
+  for (uint8_t row = 0; row < MatrixRows; ++row) {
+    for (uint8_t col = 0; col < MatrixCols; ++col) {
+      const uint8_t *glyph = font + (matrix->display[row][col] * FontWidth);
+
+      for (uint8_t glyphCol = 0; glyphCol < FontWidth; ++glyphCol) {
+        uint8_t colBits = pgm_read_byte(glyph + glyphCol);
+        i2c_write(colBits OLED_BITS_FILTER, 100);
+      }
+
+      // 1 column of space between chars (it's not included in the glyph)
+      //i2c_master_write(0);
+    }
+  }
+
+  matrix->dirty = false;
+
+done:
+  i2c_stop();
+#if DEBUG_TO_SCREEN
+  --displaying;
+#endif
+}
+
+void iota_gfx_flush(void) {
+  matrix_render(&display);
+}
+
+__attribute__ ((weak))
+void iota_gfx_task_user(void) {
+}
+
+void iota_gfx_task(void) {
+  iota_gfx_task_user();
+
+  if (display.dirty|| force_dirty) {
+    iota_gfx_flush();
+    force_dirty = false;
+  }
+
+  if (ScreenOffInterval !=0 && timer_elapsed(last_flush) > ScreenOffInterval) {
+    iota_gfx_off();
+  }
+}
+
+bool process_record_gfx(uint16_t keycode, keyrecord_t *record) {
+  force_dirty = true;
+  return true;
+}
+
+#endif

keyboards/crkbd/rev1/config.h

@@ -1,6 +1,6 @@
 /*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-Copyright 2015 Jack Humbert
+Copyright 2019 @foostan
+Copyright 2020 Drashna Jaelre <@drashna>
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -18,64 +18,15 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x3060
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    foostan
-#define PRODUCT         Corne Keyboard (crkbd)
-#define DESCRIPTION     A split keyboard with 3x6 vertically staggered keys and 3 thumb keys
-
-/* key matrix size */
-// Rows are doubled-up
-#define MATRIX_ROWS 8
-#define MATRIX_COLS 6
-#define MATRIX_ROW_PINS { D4, C6, D7, E6 }
-
-// wiring of each half
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3 }
-// #define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-// #define BACKLIGHT_LEVELS 3
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE 5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-//#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-//#define LOCKING_RESYNC_ENABLE
-
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
 
 #ifdef RGBLIGHT_ENABLE
-#define RGBLED_NUM 12    // Number of LEDs
+#    define RGBLED_NUM 12  // Number of LEDs
+#    define RGBLIGHT_SPLIT
 #endif
 
 #ifdef RGB_MATRIX_ENABLE
-#define RGBLED_NUM 54    // Number of LEDs
-#define DRIVER_LED_TOTAL RGBLED_NUM
+#    define RGBLED_NUM 54  // Number of LEDs
+#    define DRIVER_LED_TOTAL RGBLED_NUM
 #endif
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-// #define NO_DEBUG
-
-/* disable print */
-// #define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION

keyboards/crkbd/rev1/legacy/config.h

@@ -0,0 +1,23 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include <serial_config.h>
+
+#define PRODUCT         Corne Keyboard Rev.1 (Legacy Split)

keyboards/crkbd/rev1/legacy/i2c.c

@@ -6,7 +6,7 @@
 #include <stdbool.h>
 #include "i2c.h"
 
-#ifdef USE_I2C
+#if defined(USE_I2C) || defined(USE_MATRIX_I2C)
 
 // Limits the amount of we wait for any one i2c transaction.
 // Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is

keyboards/crkbd/rev1/legacy/legacy.c

@@ -0,0 +1,19 @@
+/*
+Copyright 2019 @foostan
+Copyright 2020 Drashna Jaelre <@drashna>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "legacy.h"

keyboards/crkbd/rev1/legacy/legacy.h

@@ -0,0 +1,21 @@
+/*
+Copyright 2019 @foostan
+Copyright 2020 Drashna Jaelre <@drashna>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "rev1.h"

keyboards/crkbd/rev1/legacy/post_config.h

@@ -0,0 +1,27 @@
+/*
+Copyright 2019 @foostan
+Copyright 2020 Drashna Jaelre <@drashna>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#ifdef SSD1306OLED
+#    define USE_I2C
+#endif
+
+#if defined(OLED_DRIVER_ENABLE) && (defined(USE_I2C) || defined(USE_MATRIX_I2C))
+#    error Cannot use both legacy i2c driver and new i2c_master driver at the same time. Undefine USE_I2C and/or USE_MATRIX_I2C
+#endif

keyboards/crkbd/rev1/legacy/rules.mk

@@ -0,0 +1,7 @@
+CUSTOM_MATRIX = yes
+
+SRC += 	matrix.c \
+		split_util.c \
+		split_scomm.c
+
+QUANTUM_LIB_SRC += i2c.c serial.c

keyboards/crkbd/rev1/legacy/serial_config.h

@@ -0,0 +1,22 @@
+/*
+Copyright 2019 @foostan
+Copyright 2020 Drashna Jaelre <@drashna>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef SOFT_SERIAL_PIN
+#define SOFT_SERIAL_PIN D2
+#define SERIAL_USE_MULTI_TRANSACTION
+#endif