Make the MAGIC_TOGGLE_GUI keycode work (#14886)

The old custom matrix code for Preonic rev3 was relying on the
`matrix_col_t` type, because the code actually reads the row pins and
assembles the state for whole columns, and then transposes the matrix in
the custom debouncing code.  Restore that type (which is no longer
defined by the core QMK code) to make the custom matrix code work
properly (when `matrix_row_t` was used instead of `matrix_col_t`, the
state of two electrical rows was lost, and those electrical rows
corresponded to the bottom physical row, which did not work).

.vscode/extensions.json

@@ -5,7 +5,6 @@
     "xaver.clang-format",
     "ms-vscode.cpptools",
     "bierner.github-markdown-preview",
-    "donjayamanne.git-extension-pack",
-    "CoenraadS.bracket-pair-colorizer-2"
+    "donjayamanne.git-extension-pack"
   ]
 }

Makefile

@@ -303,37 +303,8 @@ define PARSE_KEYBOARD
     KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_3)/keymaps/*/.)))
     KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_4)/keymaps/*/.)))
     KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_5)/keymaps/*/.)))
-    # this might be needed, but in a different form
-    #KEYMAPS := $$(sort $$(filter-out $$(KEYBOARD_FOLDER_1) $$(KEYBOARD_FOLDER_2) \
-        $$(KEYBOARD_FOLDER_3) $$(KEYBOARD_FOLDER_4) $$(KEYBOARD_FOLDER_5), $$(KEYMAPS)))
-
-    KEYBOARD_LAYOUTS :=
-    ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_5)/rules.mk)","")
-      LAYOUTS :=
-      $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_5)/rules.mk)
-      KEYBOARD_LAYOUTS := $$(sort $$(LAYOUTS) $$(KEYBOARD_LAYOUTS))
-    endif
-    ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_4)/rules.mk)","")
-      LAYOUTS :=
-      $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_4)/rules.mk)
-      KEYBOARD_LAYOUTS := $$(sort $$(LAYOUTS) $$(KEYBOARD_LAYOUTS))
-    endif
-    ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_3)/rules.mk)","")
-      LAYOUTS :=
-      $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_3)/rules.mk)
-      KEYBOARD_LAYOUTS := $$(sort $$(LAYOUTS) $$(KEYBOARD_LAYOUTS))
-    endif
-    ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_2)/rules.mk)","")
-      LAYOUTS :=
-      $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_2)/rules.mk)
-      KEYBOARD_LAYOUTS := $$(sort $$(LAYOUTS) $$(KEYBOARD_LAYOUTS))
-    endif
-    ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_1)/rules.mk)","")
-      LAYOUTS :=
-      $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_1)/rules.mk)
-      KEYBOARD_LAYOUTS := $$(sort $$(LAYOUTS) $$(KEYBOARD_LAYOUTS))
-    endif
 
+    KEYBOARD_LAYOUTS := $(shell $(QMK_BIN) list-layouts --keyboard $1)
     LAYOUT_KEYMAPS :=
     $$(foreach LAYOUT,$$(KEYBOARD_LAYOUTS),$$(eval LAYOUT_KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(ROOT_DIR)/layouts/*/$$(LAYOUT)/*/.)))))
 

bootloader.mk

@@ -52,26 +52,26 @@ ifeq ($(strip $(BOOTLOADER)), lufa-dfu)
     OPT_DEFS += -DBOOTLOADER_LUFA_DFU
     OPT_DEFS += -DBOOTLOADER_DFU
     ifneq (,$(filter $(MCU), at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647))
-        BOOTLOADER_SIZE = 4096
+        BOOTLOADER_SIZE ?= 4096
     endif
     ifneq (,$(filter $(MCU), at90usb1286 at90usb1287))
-        BOOTLOADER_SIZE = 8192
+        BOOTLOADER_SIZE ?= 8192
     endif
 endif
 ifeq ($(strip $(BOOTLOADER)), qmk-dfu)
     OPT_DEFS += -DBOOTLOADER_QMK_DFU
     OPT_DEFS += -DBOOTLOADER_DFU
     ifneq (,$(filter $(MCU), at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647))
-        BOOTLOADER_SIZE = 4096
+        BOOTLOADER_SIZE ?= 4096
     endif
     ifneq (,$(filter $(MCU), at90usb1286 at90usb1287))
-        BOOTLOADER_SIZE = 8192
+        BOOTLOADER_SIZE ?= 8192
     endif
 endif
 ifeq ($(strip $(BOOTLOADER)), qmk-hid)
     OPT_DEFS += -DBOOTLOADER_QMK_HID
     OPT_DEFS += -DBOOTLOADER_HID
-    BOOTLOADER_SIZE = 4096
+    BOOTLOADER_SIZE ?= 4096
 endif
 ifeq ($(strip $(BOOTLOADER)), halfkay)
     OPT_DEFS += -DBOOTLOADER_HALFKAY

docs/feature_haptic_feedback.md

@@ -168,10 +168,16 @@ This mode sets continuous haptic feedback with the option to increase or decreas
 The Haptic Exclusion is implemented as `__attribute__((weak)) bool get_haptic_enabled_key(uint16_t keycode, keyrecord_t *record)` in haptic.c. This allows a re-definition at the required level with the specific requirement / exclusion.
 
 ### NO_HAPTIC_MOD
-With the entry of `#define NO_HAPTIC_MOD` in config.h, modifiers from Left Control to Right GUI will not trigger a feedback. This also includes modifiers in a Mod Tap configuration.
+With the entry of `#define NO_HAPTIC_MOD` in config.h, the following keys will not trigger feedback:
+
+* Usual modifier keys such as Control/Shift/Alt/Gui (For example `KC_LCTRL`)
+* `MO()` momentary keys. See also [Layers](feature_layers.md).
+* `LT()` layer tap keys, when held to activate a layer. However when tapped, and the key is quickly released, and sends a keycode, haptic feedback is still triggered.
+* `TT()` layer tap toggle keys, when held to activate a layer. However when tapped `TAPPING_TOGGLE` times to permanently toggle the layer, on the last tap haptic feedback is still triggered.
+* `MT()` mod tap keys, when held to keep a usual modifier key pressed. However when tapped, and the key is quickly released, and sends a keycode, haptic feedback is still triggered. See also [Mod-Tap](mod_tap.md).
 
 ### NO_HAPTIC_FN
-With the entry of `#define NO_HAPTIC_FN` in config.h, layer keys will not rigger a feedback.
+With the entry of `#define NO_HAPTIC_FN` in config.h, deprecated `fn_actions` type function keys will not trigger a feedback.
 
 ### NO_HAPTIC_ALPHA
 With the entry of `#define NO_HAPTIC_ALPHA` in config.h, none of the alpha keys (A ... Z) will trigger a feedback.

docs/feature_stenography.md

@@ -129,7 +129,8 @@ As defined in `keymap_steno.h`.
 |`STN_RES2`||(GeminiPR only)|
 |`STN_PWR`||(GeminiPR only)|
 
-If you do not want to hit two keys with one finger combined keycodes can be used. These are also defined in `keymap_steno.h`, and causes both keys to be reported as pressed or released. To use these keycodes define `STENO_COMBINEDMAP` in your `config.h` file 
+If you do not want to hit two keys with one finger combined keycodes can be used. These are also defined in `keymap_steno.h`, and causes both keys to be reported as pressed or released. To use these keycodes define `STENO_COMBINEDMAP` in your `config.h` file.
+
 |Combined key   | Key1   | Key 2    |
 |---------------|--------|----------|
 |STN_S3         | STN_S1 | STN_S2   |

docs/feature_tap_dance.md

@@ -29,7 +29,7 @@ After this, you'll want to use the `tap_dance_actions` array to specify what act
 * `ACTION_TAP_DANCE_FN(fn)`: Calls the specified function - defined in the user keymap - with the final tap count of the tap dance action.
 * `ACTION_TAP_DANCE_FN_ADVANCED(on_each_tap_fn, on_dance_finished_fn, on_dance_reset_fn)`: Calls the first specified function - defined in the user keymap - on every tap, the second function when the dance action finishes (like the previous option), and the last function when the tap dance action resets.
 * ~~`ACTION_TAP_DANCE_FN_ADVANCED_TIME(on_each_tap_fn, on_dance_finished_fn, on_dance_reset_fn, tap_specific_tapping_term)`~~: This functions identically to the `ACTION_TAP_DANCE_FN_ADVANCED` function, but uses a custom tapping term for it, instead of the predefined `TAPPING_TERM`.
-    * This is deprecated in favor of the Per Key Tapping Term functionality, as outlined [here](custom_quantum_functions.md#Custom_Tapping_Term). You'd want to check for the specific `TD()` macro that you want to use (such as `TD(TD_ESC_CAPS)`) instead of using this specific Tap Dance function.
+    * This is deprecated in favor of the Per Key Tapping Term functionality, as outlined [here](tap_hold.md#tapping-term). You'd want to check for the specific `TD()` macro that you want to use (such as `TD(TD_ESC_CAPS)`) instead of using this specific Tap Dance function.
 
 
 The first option is enough for a lot of cases, that just want dual roles. For example, `ACTION_TAP_DANCE_DOUBLE(KC_SPC, KC_ENT)` will result in `Space` being sent on single-tap, `Enter` otherwise. 

docs/internals_gpio_control.md

@@ -4,7 +4,7 @@ QMK has a GPIO control abstraction layer which is microcontroller agnostic. This
 
 ## Functions :id=functions
 
-The following functions can provide basic control of GPIOs and are found in `quantum/quantum.h`.
+The following functions provide basic control of GPIOs and are found in `tmk_core/common/<platform>/gpio.h`.
 
 |Function                |Description                                       | Old AVR Examples                                | Old ChibiOS/ARM Examples                        |
 |------------------------|--------------------------------------------------|-------------------------------------------------|-------------------------------------------------|

docs/ja/config_options.md

@@ -141,7 +141,7 @@ QMK での全ての利用可能な設定にはデフォルトがあります。
 * `#define STRICT_LAYER_RELEASE`
   * キーリリースがどのレイヤーから来たのかを覚えるのではなく、現在のレイヤースタックを使って強制的に評価されるようにします (高度なケースに使われます)
 
-## 設定可能な挙動
+## 設定可能な挙動 :id=behaviors-that-can-be-configured
 
 * `#define TAPPING_TERM 200`
   * タップがホールドになるまでの時間。500以上に設定された場合、タップ期間中にタップされたキーもホールドになります。(訳注: PERMISSIVE_HOLDも参照)

docs/ja/contributing.md

@@ -1,8 +1,8 @@
 # 貢献方法
 
 <!---
-  original document: 0.13.15:docs/contributing.md
-  git diff 0.13.15 HEAD -- docs/contributing.md | cat
+  original document: 0.14.22:docs/contributing.md
+  git diff 0.14.22 HEAD -- docs/contributing.md | cat
 -->
 
 👍🎉 まず、これを読み貢献する時間を作ってくれてありがとうございます！🎉👍
@@ -79,7 +79,7 @@ QMK には幾つかの異なるタイプの変更があり、それぞれ異な
 ```
 kerpleplork の fronzlebop を調整します
 
-kerpleplork はエラーコード 23 で連続的に失敗していました。根本的な原因は fronzlebop 設定で、これにより kerpleplork はN回の繰り返しごとにアクティブになります。
+kerpleplork はエラーコード 23 で連続的に失敗していました。根本的な原因は fronzlebop 設定で、これにより kerpleplork は N 回の繰り返しごとにアクティブになります。
 
 私が使用できるデバイスの限られた実験では、kerpleplork の混乱を避けるために 7 は十分高い値であることを示していますが、念のため ARM デバイスを持つ人たちからフィードバックを得たいです。
 ```
@@ -122,7 +122,7 @@ enum my_keycodes {
 
 ほとんどの初めての QMK 貢献者は、個人のキーマップから始めます。キーマップの標準はかなりカジュアルなものにしようとしています(キーマップは結局のところ作成者の性格を反映しています)が、他の人があなたのキーマップを簡単に見つけて学ぶことができるように、これらのガイドラインに従うようにお願いします。
 
-* [テンプレート](documentation_templates.md) を使って `readme.md` を書きます。
+* [テンプレート](ja/documentation_templates.md) を使って `readme.md` を書きます。
 * 全てのキーマップの PR は squash されるため、コミットがどのように squash されるかを気にする場合は、自分で行う必要があります。
 * キーマップの PR に機能をまとめないでください。最初に機能をサブミットし、次にキーマップのための2つ目の PR をサブミットします。
 * `Makefile` をキーマップフォルダに含めないでください(もう使われていません)。

docs/ja/ja_doc_status.sh

@@ -0,0 +1,34 @@
+#! /bin/sh
+#
+# Script to display the Japanese translation status of documents
+#
+if [ ! -d docs/ja ]; then
+    echo "'docs/ja' not found."
+    echo "do:"
+    echo "  cd \$(QMK_TOP)"
+    echo "  ./docs/ja/ja_doc_status.sh"
+    exit 1
+fi
+
+en_docs=`cd docs;ls -1 [a-z]*.md`
+ja_docs=`cd docs/ja;ls -1 [a-z]*.md`
+en_count=`echo $en_docs | wc -w`
+ja_count=`echo $ja_docs | wc -w`
+echo "English documents  $en_count files."
+echo "Japanese documents $ja_count files."
+
+echo "Files that have not been translated yet:"
+for docfile in $en_docs
+do
+    if [ ! -f docs/ja/$docfile ]; then
+        wc docs/$docfile
+    fi
+done | sort
+echo "Files that have not been updated yet:"
+grep --no-filename "^[ ]*git diff" docs/ja/*.md | while read cmd
+do
+  cline=`echo $cmd | sh | wc -l`
+  if [ $cline -gt 0 ]; then
+    echo "$cline $cmd"
+ fi
+done | sort

docs/ja/keycodes_us_ansi_shifted.md

@@ -0,0 +1,41 @@
+# US ANSI シフト記号
+
+<!---
+  original document: 0.13.23:docs/keycodes_us_ansi_shifted.md
+  git diff 0.13.23 HEAD -- docs/keycodes_us_ansi_shifted.md | cat
+-->
+これらのキーコードは、標準の US ANSI 配列のキーボードで「シフトされる」文字に対応します。これらのキーコードは自身のキーコードを持たず、`LSFT(kc)` の単なるショートカットであり、記号自体ではなく Shift キー抜きのキーコードと左 Shift キーを送信します。
+
+## 注意書き
+
+残念ながら、これらのキーコードは、モッドタップやレイヤータップの中で使えません。キーコードで指定されたモディファイアは無視されるからです。
+
+さらに、Windows でリモートデスクトップ接続を使う場合に、問題が発生する場合があります。なぜならば、これらのコードは Shift キーを非常に速く送信するため、リモートデスクトップがコードを見落とすかもしれないからです。
+
+この問題を解決するには、リモートデスクトップ接続を開いて「オプションの表示」をクリックし、「ローカル リソース」タブを開きます。キーボードセクションでドロップダウンを「このコンピュータ」に変更します。これで問題が解決され、文字が正しく機能するようになります。
+
+## キーコード
+
+|キー                    |エイリアス         |説明       |
+|------------------------|-------------------|-----------|
+|`KC_TILDE`              |`KC_TILD`          |`~`        |
+|`KC_EXCLAIM`            |`KC_EXLM`          |`!`        |
+|`KC_AT`                 |                   |`@`        |
+|`KC_HASH`               |                   |`#`        |
+|`KC_DOLLAR`             |`KC_DLR`           |`$`        |
+|`KC_PERCENT`            |`KC_PERC`          |`%`        |
+|`KC_CIRCUMFLEX`         |`KC_CIRC`          |`^`        |
+|`KC_AMPERSAND`          |`KC_AMPR`          |`&`        |
+|`KC_ASTERISK`           |`KC_ASTR`          |`*`        |
+|`KC_LEFT_PAREN`         |`KC_LPRN`          |`(`        |
+|`KC_RIGHT_PAREN`        |`KC_RPRN`          |`)`        |
+|`KC_UNDERSCORE`         |`KC_UNDS`          |`_`        |
+|`KC_PLUS`               |                   |`+`        |
+|`KC_LEFT_CURLY_BRACE`   |`KC_LCBR`          |`{`        |
+|`KC_RIGHT_CURLY_BRACE`  |`KC_RCBR`          |`}`        |
+|`KC_PIPE`               |                   |`\|`       |
+|`KC_COLON`              |`KC_COLN`          |`:`        |
+|`KC_DOUBLE_QUOTE`       |`KC_DQUO`, `KC_DQT`|`"`        |
+|`KC_LEFT_ANGLE_BRACKET` |`KC_LABK`, `KC_LT` |`<`        |
+|`KC_RIGHT_ANGLE_BRACKET`|`KC_RABK`, `KC_GT` |`>`        |
+|`KC_QUESTION`           |`KC_QUES`          |`?`        |

docs/ja/mod_tap.md

@@ -1,8 +1,8 @@
 # モッドタップ
 
 <!---
-  original document: 0.10.36:docs/mod_tap.md
-  git diff 0.10.36 HEAD -- docs/mod_tap.md | cat
+  original document: 0.13.34:docs/mod_tap.md
+  git diff 0.13.34 HEAD -- docs/mod_tap.md | cat
 -->
 
 モッドタップキー `MT(mod, kc)` は、押したままの時にモディファイアのように機能し、タップされた時に通常のキーのように振舞います。別の言い方をすると、タップした時に Escape を送信しますが、押したままの時に Control あるいは Shift キーとして機能するキーを持つことができます。
@@ -42,7 +42,10 @@ MT(MOD_LCTL | MOD_LSFT, KC_ESC)
 | `RSFT_T(kc)` |                                                                   | 押したままの場合は右 Shift、タップした場合は `kc`                      |
 | `RALT_T(kc)` | `ROPT_T(kc)`, `ALGR_T(kc)`                                        | 押したままの場合は右 Alt、タップした場合は `kc`                        |
 | `RGUI_T(kc)` | `RCMD_T(kc)`, `RWIN_T(kc)`                                        | 押したままの場合は右 GUI、タップした場合は `kc`                        |
-| `SGUI_T(kc)` | `SCMD_T(kc)`, `SWIN_T(kc)`                                        | 押したままの場合は左 Shift と左 GUI、タップした場合は `kc`             |
+| `LSG_T(kc)`  | `SGUI_T(kc)`, `SCMD_T(kc)`, `SWIN_T(kc)`                          | 押したままの場合は左 Shift と左 GUI、タップした場合は `kc`             |
+| `LAG_T(kc)`  |                                                                   | 押したままの場合は左 Alt と左 GUI、タップした場合は `kc`               |
+| `RSG_T(kc)`  |                                                                   | 押したままの場合は右 Shift と右 GUI、タップした場合は `kc`             |
+| `RAG_T(kc)`  |                                                                   | 押したままの場合は右 Alt と右 GUI、タップした場合は `kc`               |
 | `LCA_T(kc)`  |                                                                   | 押したままの場合は左 Control と左 Alt、タップした場合は `kc`           |
 | `LSA_T(kc)`  |                                                                   | 押したままの場合は左 Shift と Alt、タップした場合は `kc`               |
 | `RSA_T(kc)`  | `SAGR_T(kc)`                                                      | 押したままの場合は右 Shift と Alt (AltGr)、タップした場合は `kc`       |
@@ -55,11 +58,13 @@ MT(MOD_LCTL | MOD_LSFT, KC_ESC)
 
 ## 注意事項
 
-残念ながら、キーコードで指定されたモディファイアは無視されるため、これらのキーコードはモッドタップまたはレイヤータップで使うことができません。
+現在のところ、`MT()` の引数 `kc` は[基本的なキーコードセット](ja/keycodes_basic.md)に制限されています。つまり、`LCTL()`、`KC_TILD`、あるいは `0xFF` より大きなキーコードを使うことができません。これは、QMK が16ビットのキーコードを使うためです。3ビットは機能の識別のために使われ、1ビットは右または左の mod を選択するために使われ、4ビットはどの mod かを区別するために使われ、キーコードには8ビットしか残されていません。さらに、モッドタップで少なくとも1つの右手用のモディファイアが指定された場合、指定された全てのモディファイアが右手用になるため、2つをうまく組み合わせて一致させることはできません。例えば、左 Control と右 Shift は、右 Control と右 Shift になります。
 
-さらに、Windows でリモートデスクトップ接続を使う場合に、問題が発生する場合があります。これらのコードはシフトを非常に高速に送信するため、リモートデスクトップはコードを見逃すかもしれません。
+これを拡張してもせいぜい複雑になるだけでしょう。32ビットキーコードに移行すると、これの多くが解決されますが、キーマップマトリックスが使用する領域が2倍になります。また、問題が起きる可能性もあります。タップしたキーコードにモディファイアを適用する必要がある場合は、[タップダンス](ja/feature_tap_dance.md#example-5)を使うことができます。
 
-これを修正するには、リモートデスクトップ接続を開き、「オプションの表示」を開き、「ローカル リソース」タブを開きます。キーボードセクションで、ドロップダウンを「このコンピューター」に変更します。これにより問題が修正され、キャラクタが正しく動作するようになります。
+さらに、Windows でリモートデスクトップ接続を使う場合に、問題が発生する場合があります。なぜならば、これらのキーコードは人よりも速くキーイベントを送信するため、リモートデスクトップがキーコードを見落とすかもしれないからです。
+この問題を解決するには、リモートデスクトップ接続を開いて「オプションの表示」をクリックし、「ローカル リソース」タブを開きます。キーボードセクションで、ドロップダウンを「このコンピューター」に変更します。これで問題が解決され、文字が正しく機能するようになります。
+[`TAP_CODE_DELAY`](ja/config_options.md#behaviors-that-can-be-configured) を増やすことで緩和することもできます。
 
 ## 他のリソース
 

docs/ja/syllabus.md

@@ -1,8 +1,8 @@
 # QMK シラバス
 
 <!---
-  original document: 0.9.51:docs/syllabus.md
-  git diff 0.9.51 HEAD -- docs/syllabus.md | cat
+  original document: 0.14.22:docs/syllabus.md
+  git diff 0.14.22 HEAD -- docs/syllabus.md | cat
 -->
 
 このページは最初に基本を紹介し、そして、QMK に習熟するために必要な全ての概念を理解するように導くことで、QMK の知識を構築するのに役立ちます。
@@ -45,6 +45,7 @@
    * [タップダンス](ja/feature_tap_dance.md)
    * [コンボ](ja/feature_combo.md)
    * [ユーザスペース](ja/feature_userspace.md)
+   * [キーオーバーライド](ja/feature_key_overrides.md)
 
 # 上級トピック
 
@@ -58,7 +59,7 @@
 * **高度な機能**
    * [ユニコード](ja/feature_unicode.md)
    * [API](ja/api_overview.md)
-   * [ブートマジック](ja/feature_bootmagic.md)
+   * [ブートマジックライト](ja/feature_bootmagic.md)
 * **ハードウェア**
    * [キーボードがどのように動作するか](ja/how_keyboards_work.md)
    * [キーボードマトリックスの仕組み](ja/how_a_matrix_works.md)

docs/ja/understanding_qmk.md

@@ -1,15 +1,15 @@
 # QMK のコードの理解
 
 <!---
-  original document: 0.13.15:docs/understanding_qmk.md
-  git diff 0.13.15 HEAD -- docs/understanding_qmk.md | cat
+  original document: 0.14.22:docs/understanding_qmk.md
+  git diff 0.14.22 HEAD -- docs/understanding_qmk.md | cat
 -->
 
 このドキュメントでは、QMK ファームウェアがどのように機能するかを非常に高いレベルから説明しようとしています。基本的なプログラミングの概念を理解していることを前提としていますが、(実例を示す必要がある場合を除き) C に精通していることを前提にはしていません。以下のドキュメントの基本的な知識があることを前提としています。
 
 * [入門](ja/getting_started_introduction.md)
 * [キーボードがどのように動作するか](ja/how_keyboards_work.md)
-* [FAQ](ja/faq.md)
+* [FAQ](ja/faq_general.md)
 
 ## スタートアップ
 
@@ -138,41 +138,42 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 `process_record()` 関数自体は一見簡単に見えますが、その内部は QMK の様々なレベルで機能を上書きするためのゲートウェイが隠されています。キーボード/キーマップレベルの機能について調べる必要があるときは、以下に列挙した一連のイベントを手引帳として使います。`rules.mk` またはほかの場所で設定されたオプションに応じて、最終的なファームウェアに以下の関数のサブセットのみが含まれます。
 
 * [`void process_record(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/tmk_core/common/action.c#L172)
-   * [`bool process_record_quantum(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/quantum.c#L206)
-      * [このレコードをキーコードにマップする](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/quantum.c#L226)
-      * [`void velocikey_accelerate(void)`](https://github.com/qmk/qmk_firmware/blob/c1c5922aae7b60b7c7d13d3769350eed9dda17ab/quantum/velocikey.c#L27)
-      * [`void preprocess_tap_dance(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_tap_dance.c#L119)
-      * [`bool process_key_lock(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_key_lock.c#L62)
-      * [`bool process_clicky(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_clicky.c#L79)
-      * [`bool process_haptic(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/2cee371bf125a6ec541dd7c5a809573facc7c456/drivers/haptic/haptic.c#L216)
-      * [`bool process_record_kb(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/keyboards/clueboard/card/card.c#L20)
-         * [`bool process_record_user(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/keyboards/clueboard/card/keymaps/default/keymap.c#L58)
-      * [`bool process_midi(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_midi.c#L81)
-      * [`bool process_audio(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_audio.c#L19)
-      * [`bool process_steno(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_steno.c#L160)
-      * [`bool process_music(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_music.c#L114)
-      * [`bool process_tap_dance(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_tap_dance.c#L141)
-      * [`bool process_unicode_common(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_unicode_common.c#L169) は、以下のいずれかを呼び出します:
-         * [`bool process_unicode(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_unicode.c#L20)
-         * [`bool process_unicodemap(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_unicodemap.c#L46)
-         * [`bool process_ucis(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_ucis.c#L95)
-      * [`bool process_leader(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_leader.c#L51)
-      * [`bool process_combo(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_combo.c#L115)
-      * [`bool process_printer(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_printer.c#L77)
-      * [`bool process_auto_shift(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_auto_shift.c#L94)
-      * [`bool process_terminal(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_terminal.c#L264)
-      * [Quantum 固有のキーコードを識別して処理する](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/quantum.c#L291)
+  * [`bool process_record_quantum(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/quantum.c#L206)
+    * [このレコードをキーコードにマップする](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/quantum.c#L226)
+    * [`void velocikey_accelerate(void)`](https://github.com/qmk/qmk_firmware/blob/c1c5922aae7b60b7c7d13d3769350eed9dda17ab/quantum/velocikey.c#L27)
+    * [`void preprocess_tap_dance(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_tap_dance.c#L119)
+    * [`bool process_key_lock(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_key_lock.c#L62)
+    * [`bool process_clicky(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_clicky.c#L79)
+    * [`bool process_haptic(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/2cee371bf125a6ec541dd7c5a809573facc7c456/drivers/haptic/haptic.c#L216)
+    * [`bool process_record_kb(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/keyboards/clueboard/card/card.c#L20)
+      * [`bool process_record_user(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/keyboards/clueboard/card/keymaps/default/keymap.c#L58)
+    * [`bool process_midi(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_midi.c#L81)
+    * [`bool process_audio(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_audio.c#L19)
+    * [`bool process_steno(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_steno.c#L160)
+    * [`bool process_music(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_music.c#L114)
+    * [`bool process_key_override(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/5a1b857dea45a17698f6baa7dd1b7a7ea907fb0a/quantum/process_keycode/process_key_override.c#L397)
+    * [`bool process_tap_dance(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_tap_dance.c#L141)
+    * [`bool process_unicode_common(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_unicode_common.c#L169) は、以下のいずれかを呼び出します:
+        * [`bool process_unicode(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_unicode.c#L20)
+        * [`bool process_unicodemap(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_unicodemap.c#L46)
+        * [`bool process_ucis(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_ucis.c#L95)
+    * [`bool process_leader(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_leader.c#L51)
+    * [`bool process_combo(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_combo.c#L115)
+    * [`bool process_printer(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_printer.c#L77)
+    * [`bool process_auto_shift(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_auto_shift.c#L94)
+    * [`bool process_terminal(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_terminal.c#L264)
+    * [Quantum 固有のキーコードを識別して処理する](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/quantum.c#L291)
 
 この一連のイベントの中の任意のステップで (`process_record_kb()` のような)関数は `false` を返して、以降の処理を停止することができます。
 
 この呼び出しの後で、`post_process_record()` が呼ばれます。これはキーコードが通常処理された後に実行する必要がある追加のクリーンアップを処理するために使うことができます。
 
 * [`void post_process_record(keyrecord_t *record)`]()
-   * [`void post_process_record_quantum(keyrecord_t *record)`]()
-      * [このレコードをキーコードにマップする]()
-      * [`void post_process_clicky(uint16_t keycode, keyrecord_t *record)`]()
-      * [`void post_process_record_kb(uint16_t keycode, keyrecord_t *record)`]()
-         * [`void post_process_record_user(uint16_t keycode, keyrecord_t *record)`]()
+  * [`void post_process_record_quantum(keyrecord_t *record)`]()
+    * [このレコードをキーコードにマップする]()
+    * [`void post_process_clicky(uint16_t keycode, keyrecord_t *record)`]()
+    * [`void post_process_record_kb(uint16_t keycode, keyrecord_t *record)`]()
+      * [`void post_process_record_user(uint16_t keycode, keyrecord_t *record)`]()
 
 <!--
 #### Mouse Handling

docs/mod_tap.md

@@ -61,6 +61,80 @@ You may also run into issues when using Remote Desktop Connection on Windows. Be
 To fix this, open Remote Desktop Connection, click on "Show Options", open the the "Local Resources" tab, and in the keyboard section, change the drop down to "On this Computer". This will fix the issue, and allow the characters to work correctly.
 It can also be mitigated by increasing [`TAP_CODE_DELAY`](config_options.md#behaviors-that-can-be-configured).
 
+## Intercepting Mod-Taps
+
+### Changing tap function
+
+The basic keycode limitation with Mod-Tap can be worked around by intercepting it in `process_record_user`. For example, shifted keycode `KC_DQUO` cannot be used with `MT()` because it is a 16-bit keycode alias of `LSFT(KC_QUOT)`. Modifiers on `KC_DQUO` will be masked by `MT()`. But the following custom code can be used to intercept the "tap" function to manually send `KC_DQUO`:
+
+```c
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case LCTL_T(KC_DQUO):
+            if (record->tap.count && record->event.pressed) {
+                tap_code16(KC_DQUO); // Send KC_DQUO on tap
+                return false;        // Return false to ignore further processing of key
+            }
+            break;
+    }
+    return true;
+}
+```
+
+### Changing hold function
+
+Likewise, the same custom code can also be used to intercept the hold function to send custom user key code. The following example uses `LT(0, kc)` (layer-tap key with no practical use because layer 0 is always active) to add cut, copy and paste function to X,C and V keys when they are held down:
+
+```c
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case LT(0,KC_X):
+            if (record->tap.count && record->event.pressed) {
+                return true;         // Return true for normal processing of tap keycode
+            } else if (record->event.pressed) {
+                tap_code16(C(KC_X)); // Intercept hold function to send Ctrl-X
+            }
+            return false;
+        case LT(0,KC_C):
+            if (record->tap.count && record->event.pressed) {
+                return true;         // Return true for normal processing of tap keycode
+            } else if (record->event.pressed) {
+                tap_code16(C(KC_C)); // Intercept hold function to send Ctrl-C
+            }
+            return false;
+        case LT(0,KC_V):
+            if (record->tap.count && record->event.pressed) {
+                return true;         // Return true for normal processing of tap keycode
+            } else if (record->event.pressed) {
+                tap_code16(C(KC_V)); // Intercept hold function to send Ctrl-V
+            }
+            return false;
+    }
+    return true;
+}
+```
+
+Enabling `IGNORE_MOD_TAP_INTERRUPT` is recommended when using Mod-Tap on alphanumeric keys to avoid hold function taking precendence when the next key is pressed quickly. See [Ignore Mod Tap Interrupt](tap_hold.md#ignore-mod-tap-interrupt) for more details.
+
+### Changing both tap and hold
+
+This last example implements custom tap and hold function with `LT(0,KC_NO)` to create a single copy-on-tap, paste-on-hold key:
+
+```c
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case LT(0,KC_NO):
+            if (record->tap.count && record->event.pressed) {
+                tap_code16(C(KC_C)); // Intercept tap function to send Ctrl-C
+            } else if (record->event.pressed) {
+                tap_code16(C(KC_V)); // Intercept hold function to send Ctrl-V
+            }
+            return false;
+    }
+    return true;
+}
+```
+
 ## Other Resources
 
 See the [Tap-Hold Configuration Options](tap_hold.md) for additional flags that tweak Mod-Tap behavior.

docs/pr_checklist.md

@@ -4,22 +4,24 @@ This is a non-exhaustive checklist of what the QMK Collaborators will be checkin
 
 If there are any inconsistencies with these recommendations, you're best off [creating an issue](https://github.com/qmk/qmk_firmware/issues/new) against this document, or getting in touch with a QMK Collaborator on [Discord](https://discord.gg/Uq7gcHh).
 
-## General PRs
+## Requirements for all PRs
 
 - PR should be submitted using a non-`master` branch on the source repository
     - this does not mean you target a different branch for your PR, rather that you're not working out of your own master branch
     - if submitter _does_ use their own `master` branch, they'll be given a link to the ["how to git"](https://docs.qmk.fm/#/newbs_git_using_your_master_branch) page after merging -- (end of this document will contain the contents of the message)
 - newly-added directories and filenames must be lowercase
-    - this rule may be relaxed if upstream sources originally had uppercase characters (e.g. ChibiOS, or imported files from other repositories etc.)
-    - if there is enough justification (i.e. consistency with existing core files etc.) this can be relaxed
+    - this rule may be relaxed if upstream sources originally had uppercase characters (e.g. LUFA, ChibiOS, or imported files from other repositories etc.)
+    - if there is valid justification (i.e. consistency with existing core files etc.) this can be relaxed
         - a board designer naming their keyboard with uppercase letters is not enough justification
 - valid license headers on all `*.c` and `*.h` source files
     - GPL2/GPL3 recommended for consistency
+    - an example GPL2+ license header may be copied and modified from the bottom of this document
     - other licenses are permitted, however they must be GPL-compatible and must allow for redistribution. Using a different license will almost certainly delay a PR getting merged.
+    - missing license headers will prevent PR merge due to ambiguity with license compatibility
 - QMK Codebase "best practices" followed
     - this is not an exhaustive list, and will likely get amended as time goes by
     - `#pragma once` instead of `#ifndef` include guards in header files
-    - no "old-school" GPIO/I2C/SPI functions used -- must use QMK abstractions unless justifiable (and laziness is not valid justification)
+    - no "old-school" or other low-level GPIO/I2C/SPI functions may be used -- must use QMK abstractions unless justifiable (and laziness is not valid justification)
     - timing abstractions should be followed too:
         - `wait_ms()` instead of `_delay_ms()` (remove `#include <util/delay.h>` too)
         - `timer_read()` and `timer_read32()` etc. -- see [timer.h](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/common/timer.h) for the timing APIs
@@ -28,7 +30,7 @@ If there are any inconsistencies with these recommendations, you're best off [cr
         - discuss it with QMK Collaborators on Discord
         - refactor it as a separate core change
         - remove your specific copy in your board
-- rebase and fix all merge conflicts before opening the PR (in case you need help or advice, reach out to QMK Collaborators on Discord)
+- fix all merge conflicts before opening the PR (in case you need help or advice, reach out to QMK Collaborators on Discord)
 
 ## Keymap PRs
 
@@ -48,11 +50,13 @@ https://github.com/qmk/qmk_firmware/pulls?q=is%3Apr+is%3Aclosed+label%3Akeyboard
     - valid maintainer
     - displays correctly in Configurator (press Ctrl+Shift+I to preview local file, turn on fast input to verify ordering)
 - `readme.md`
-    - standard template should be present
-    - flash command has `:flash` at end
+    - standard template should be present -- [link to template](https://github.com/qmk/qmk_firmware/blob/master/data/templates/avr/readme.md)
+    - flash command is present, and has `:flash` at end
     - valid hardware availability link (unless handwired) -- private groupbuys are okay, but one-off prototypes will be questioned. If open-source, a link to files should be provided.
     - clear instructions on how to reset the board into bootloader mode
     - a picture about the keyboard and preferably about the PCB, too
+        - images are not to be placed in the `qmk_firmware` repository
+        - images should be uploaded to an external image hosting service, such as [imgur](https://imgur.com/).
 - `rules.mk`
     - removed `MIDI_ENABLE`, `FAUXCLICKY_ENABLE` and `HD44780_ENABLE`
     - modified `# Enable Bluetooth with the Adafruit EZ-Key HID` -> `# Enable Bluetooth`
@@ -69,20 +73,20 @@ https://github.com/qmk/qmk_firmware/pulls?q=is%3Apr+is%3Aclosed+label%3Akeyboard
         - initialisation code for the matrix and critical devices
         - mirroring existing functionality of a commercial board (like custom keycodes and special animations etc.) should be handled through non-`default` keymaps
     - Vial-related files or changes will not be accepted, as they are not used by QMK firmware (no Vial-specific core code has been submitted or merged)
-- `keyboard.c`
+- `<keyboard>.c`
     - empty `xxxx_xxxx_kb()` or other weak-defined default implemented functions removed
     - commented-out functions removed too
     - `matrix_init_board()` etc. migrated to `keyboard_pre_init_kb()`, see: [keyboard_pre_init*](https://docs.qmk.fm/#/custom_quantum_functions?id=keyboard_pre_init_-function-documentation)
     - prefer `CUSTOM_MATRIX = lite` if custom matrix used, allows for standard debounce, see [custom matrix 'lite'](https://docs.qmk.fm/#/custom_matrix?id=lite)
     - prefer LED indicator [Configuration Options](https://docs.qmk.fm/#/feature_led_indicators?id=configuration-options) to custom `led_update_*()` implementations where possible
-- `keyboard.h`
+- `<keyboard>.h`
     - `#include "quantum.h"` appears at the top
     - `LAYOUT` macros should use standard definitions if applicable
         - use the Community Layout macro names where they apply (preferred above `LAYOUT`/`LAYOUT_all`)
 - keymap `config.h`
     - no duplication of `rules.mk` or `config.h` from keyboard
 - `keymaps/default/keymap.c`
-    - `QMKBEST`/`QMKURL` removed (sheesh)
+    - `QMKBEST`/`QMKURL` removed
     - if using `MO(_LOWER)` and `MO(_RAISE)` keycodes or equivalent, and the keymap has an adjust layer when holding both keys -- if the keymap has no "direct-to-adjust" keycode (such as `MO(_ADJUST)`) then you should prefer to write...
         ```
         layer_state_t layer_state_set_user(layer_state_t state) {
@@ -98,7 +102,6 @@ https://github.com/qmk/qmk_firmware/pulls?q=is%3Apr+is%3Aclosed+label%3Akeyboard
 - submitters can also have a "manufacturer-matching" keymap that mirrors existing functionality of the commercial product, if porting an existing board
 - Do not include VIA json files in the PR. These do not belong in the QMK repository as they are not used by QMK firmware -- they belong in the [VIA Keyboard Repo](https://github.com/the-via/keyboards)
 
-
 Also, specific to ChibiOS:
 - **strong** preference to using existing ChibiOS board definitions.
     - a lot of the time, an equivalent Nucleo board can be used with a different flash size or slightly different model in the same family
@@ -112,7 +115,7 @@ Also, specific to ChibiOS:
 ## Core PRs
 
 - must now target `develop` branch, which will subsequently be merged back to `master` on the breaking changes timeline
-- other notes TBD
+- other requirements are at the discretion of QMK collaborators
     - core is a lot more subjective given the breadth of posted changes
 
 ---
@@ -134,6 +137,33 @@ Thanks for contributing!
 
 ## Review Process
 
-In general, we want to see two (or more) approvals that are meaningful (e.g. that have inspected code) before a PR will be considered for merge. These reviews are not limited to collaborators -- any community member willing to put in the time is welcomed (and encouraged). The only difference is that your checkmark won't be green, and that's fine! 
+In general, we want to see two (or more) approvals that are meaningful (e.g. that have inspected code) before a PR will be considered for merge. These reviews are not limited to collaborators -- any community member willing to put in the time is welcomed (and encouraged). The only difference is that your checkmark won't be green, and that's fine!
 
 Additionally, PR reviews are something that is done in our free time. We are not paid nor compensated for the time we spend reviewing, as it is a labor of love. As such, this means that it can take time for us to get to your Pull Request.  Things like family, or life can get in the way of us getting to PRs, and burnout is a serious concern. The QMK firmware repository averages 200 PRs opened and 200 PRs merged every month, so please have patience.
+
+## Example GPLv2 Header
+
+```
+/* Copyright 2021 Your Name (@yourgithub)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+```
+
+Or, optionally, using [SPDX identifier](https://spdx.org/licenses/) instead:
+
+```
+// Copyright 2021 Your Name (@yourgithub)
+// SPDX-License-Identifier: GPL-2.0-or-later
+```

docs/reference_info_json.md

@@ -9,33 +9,39 @@ You can create `info.json` files at every level under `qmk_firmware/keyboards/<n
 The `info.json` file is a JSON formatted dictionary with the following keys available to be set. You do not have to set all of them, merely the keys that apply to your keyboard.
 
 * `keyboard_name`
-  * A free-form text string describing the keyboard.
-  * Example: `Clueboard 66%`
+    * A free-form text string describing the keyboard.
+    * Example: `Clueboard 66%`
+* `manufacturer`
+    * A free-form text string describing the keyboard's manufacturer.
+    * Example: `Clueboard`
 * `url`
-  * A URL to the keyboard's product page, [QMK.fm/keyboards](https://qmk.fm/keyboards) page, or other page describing information about the keyboard.
+    * A URL to the keyboard's product page, [QMK.fm/keyboards](https://qmk.fm/keyboards) page, or other page describing information about the keyboard.
+    * Example: `https://clueboard.co`
 * `maintainer`
-  * GitHub username of the maintainer, or `qmk` for community maintained boards
+    * GitHub username of the maintainer, or `qmk` for community maintained boards.
+    * Example: `skullydazed`
 * `debounce`
-  * How many milliseconds (ms) to wait for debounce to happen. (Default: 5)
+    * The amount of time in milliseconds to wait for debounce to happen.
+    * Default: `5`
 * `diode_direction`
-  * The direction diodes face. See [`DIRECT_PINS` in the hardware configuration](https://docs.qmk.fm/#/config_options?id=hardware-options) for more details.
+    * The direction diodes face. See [`DIRECT_PINS` in the hardware configuration](https://docs.qmk.fm/#/config_options?id=hardware-options) for more details.
 * `layout_aliases`
-  * A dictionary containing layout aliases. The key is the alias and the value is a layout in `layouts` it maps to.
+    * A dictionary containing layout aliases. The key is the alias and the value is a layout in `layouts` it maps to.
 * `layouts`
-  * Physical Layout representations. See the [Layout Format](#layout_format) section for more detail.
+    * Physical Layout representations. See the [Layout Format](#layout_format) section for more detail.
 * `matrix_pins`
-  * Configure the pins corresponding to columns and rows, or direct pins. See [Matrix Pins](#matrix_pins) for more detail.
+    * Configure the pins corresponding to columns and rows, or direct pins. See the [Matrix Pins](#matrix_pins) section for more detail.
 * `rgblight`
-  * Configure the [RGB Lighting feature](feature_rgblight.md). See the [RGB Lighting](#rgb_lighting) section for more detail.
+    * Configure the [RGB Lighting feature](feature_rgblight.md). See the [RGB Lighting](#rgb_lighting) section for more detail.
 * `usb`
-  * Configure USB VID, PID, and other parameters. See [USB](#USB) for more detail.
+    * Configure USB VID, PID, and other parameters. See the [USB](#USB) section for more detail.
 
 ### Layout Format
 
 Within our `info.json` file the `layouts` portion of the dictionary contains several nested dictionaries. The outer layer consists of QMK layout macros, for example `LAYOUT_ansi` or `LAYOUT_iso`.
 
 * `layout`
-  * A list of Key Dictionaries describing the physical layout. See the next section for more details.
+    * A list of Key Dictionaries describing the physical layout. See the next section for more details.
 
 ### Key Dictionary Format
 
@@ -44,18 +50,20 @@ Each Key Dictionary in a layout describes the physical properties of a key. If y
 All key positions and rotations are specified in relation to the top-left corner of the keyboard, and the top-left corner of each key.
 
 * `x`
-  * **Required**: The absolute position of the key in the horizontal axis, in Key Units.
+    * **Required**. The absolute position of the key in the horizontal axis, in Key Units.
 * `y`
-  * **Required**: The absolute position of the key in the vertical axis, in Key Units.
+    * **Required**. The absolute position of the key in the vertical axis, in Key Units.
 * `w`
-  * The width of the key, in Key Units. Ignored if `ks` is provided. Default: `1`
+    * The width of the key, in Key Units.
+    * Default: `1`
 * `h`
-  * The height of the key, in Key Units. Ignored if `ks` is provided. Default: `1`
+    * The height of the key, in Key Units.
+    * Default: `1`
 * `label`
-  * What to name this position in the matrix.
-  * This should usually correspond to the keycode for the first layer of the default keymap.
+    * What to name this position in the matrix. This should usually correspond to the keycode for the first layer of the default keymap.
 * `matrix`
-  * A 2 item list describing the row and column location for this key.
+    * A two item list describing the row and column location for this key.
+    * Example: `[0, 4]`
 
 ### Matrix Pins
 
@@ -69,11 +77,11 @@ Example:
 
 ```json
 {
-  "diode_direction": "COL2ROW",
-  "matrix_pins": {
-    "cols": ["F4", "E6", "B1", "D2"],
-    "rows": ["B0", "D3", "D5", "D4", "D6"]
-  }
+    "diode_direction": "COL2ROW",
+    "matrix_pins": {
+        "cols": ["F4", "E6", "B1", "D2"],
+        "rows": ["B0", "D3", "D5", "D4", "D6"]
+    }
 }
 ```
 
@@ -144,23 +152,23 @@ Example:
 }
 ```
 
-#### RGB Light Animations
+#### RGBLight Animations
 
 The following animations can be enabled:
 
-| Key | Description |
-|-----|-------------|
-| `all` | Enable all additional animation modes. |
-| `alternating` | Enable alternating animation mode. |
-| `breathing` | Enable breathing animation mode. |
-| `christmas` | Enable christmas animation mode. |
-| `knight` | Enable knight animation mode. |
-| `rainbow_mood` | Enable rainbow mood animation mode. |
-| `rainbow_swirl` | Enable rainbow swirl animation mode. |
-| `rgb_test` | Enable RGB test animation mode. |
-| `snake` | Enable snake animation mode. |
-| `static_gradient` | Enable static gradient mode. |
-| `twinkle` | Enable twinkle animation mode. |
+|Key              |Description                           |
+|-----------------|--------------------------------------|
+|`all`            |Enable all additional animation modes.|
+|`alternating`    |Enable alternating animation mode.    |
+|`breathing`      |Enable breathing animation mode.      |
+|`christmas`      |Enable christmas animation mode.      |
+|`knight`         |Enable knight animation mode.         |
+|`rainbow_mood`   |Enable rainbow mood animation mode.   |
+|`rainbow_swirl`  |Enable rainbow swirl animation mode.  |
+|`rgb_test`       |Enable RGB test animation mode.       |
+|`snake`          |Enable snake animation mode.          |
+|`static_gradient`|Enable static gradient mode.          |
+|`twinkle`        |Enable twinkle animation mode.        |
 
 ### USB
 
@@ -170,10 +178,10 @@ Example:
 
 ```json
 {
-  "usb": {
-    "vid": "0xC1ED",
-    "pid": "0x23B0",
-    "device_ver": "0x0001"
-  }
+    "usb": {
+        "vid": "0xC1ED",
+        "pid": "0x23B0",
+        "device_ver": "0x0001"
+    }
 }
 ```

keyboards/0xc7/61key/61key.h

@@ -28,7 +28,7 @@
  * The second converts the arguments into a two-dimensional array which
  * represents the switch matrix.
  */
-#define LAYOUT( \
+#define LAYOUT_60_ansi( \
     K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
     K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
     K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, \

keyboards/0xc7/61key/info.json

@@ -1,9 +1,12 @@
 {
     "keyboard_name": "61Key",
     "url": "",
-    "maintainer": "0xC7",
+    "maintainer": "RealEmanGaming",
+    "layout_aliases": {
+        "LAYOUT": "LAYOUT_60_ansi"
+    },
     "layouts": {
-        "LAYOUT": {
+        "LAYOUT_60_ansi": {
             "layout": [
                 {"x": 0, "y": 0},
                 {"x": 1, "y": 0},
@@ -18,7 +21,7 @@
                 {"x": 10, "y": 0},
                 {"x": 11, "y": 0},
                 {"x": 12, "y": 0},
-                {"x": 13, "y": 0},
+                {"x": 13, "y": 0, "w": 2},
 
                 {"x": 0, "y": 1, "w": 1.5},
                 {"x": 1.5, "y": 1},
@@ -47,10 +50,9 @@
                 {"x": 9.75, "y": 2},
                 {"x": 10.75, "y": 2},
                 {"x": 11.75, "y": 2},
-                {"x": 12.75, "y": 2, "w": 1.25},
+                {"x": 12.75, "y": 2, "w": 2.25},
 
-                {"x": 0, "y": 3, "w": 1.25},
-                {"x": 1.25, "y": 3},
+                {"x": 0, "y": 3, "w": 2.25},
                 {"x": 2.25, "y": 3},
                 {"x": 3.25, "y": 3},
                 {"x": 4.25, "y": 3},
@@ -60,7 +62,8 @@
                 {"x": 8.25, "y": 3},
                 {"x": 9.25, "y": 3},
                 {"x": 10.25, "y": 3},
-                {"x": 11.25, "y": 3, "w": 1.75},
+                {"x": 11.25, "y": 3},
+                {"x": 12.25, "y": 3, "w": 2.75},
 
                 {"x": 0, "y": 4, "w": 1.25},
                 {"x": 1.25, "y": 4, "w": 1.25},

keyboards/0xc7/61key/keymaps/default/keymap.c

@@ -17,14 +17,14 @@
 #include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [0] = LAYOUT(
+    [0] = LAYOUT_60_ansi(
         KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
         KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
         KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
         KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
         KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_APP, KC_RCTL
     ),
-    [1] = LAYOUT(
+    [1] = LAYOUT_60_ansi(
         KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,
         KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS,
         KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_INS, KC_HOME, KC_PGUP, KC_TRNS,

keyboards/0xc7/61key/keymaps/via/keymap.c

@@ -17,28 +17,28 @@
 #include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [0] = LAYOUT(
+    [0] = LAYOUT_60_ansi(
         KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
         KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
         KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
         KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
         KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_APP, KC_RCTL
     ),
-    [1] = LAYOUT(
+    [1] = LAYOUT_60_ansi(
         KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,
         KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS,
         KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_INS, KC_HOME, KC_PGUP, KC_TRNS,
         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, KC_END, KC_PGDN, KC_TRNS,
         KC_TRNS, KC_TRNS, KC_LOCK, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, C(A(KC_DEL))
     ),
-    [2] = LAYOUT(
+    [2] = LAYOUT_60_ansi(
         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
     ),
-    [3] = LAYOUT(
+    [3] = LAYOUT_60_ansi(
         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,

keyboards/0xc7/61key/readme.md

@@ -10,11 +10,11 @@ Custom keyboard designed by RealEmanGaming aka 0xC7
 
 Make example for this keyboard (after setting up your build environment):
 
-    make 61key:default
+    make 0xc7/61key:default
 
 Flashing example for this keyboard:
 
-    make 61key:default:flash
+    make 0xc7/61key:default:flash
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
 

keyboards/0xcb/1337/rules.mk

@@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
-UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output
 
 ENCODER_ENABLE = yes

keyboards/1upkeyboards/1up60hse/rules.mk

@@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes            # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
-UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output
 EXTRAFLAGS += -flto
 

keyboards/1upkeyboards/super16/rules.mk

@@ -20,7 +20,6 @@ BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no       # Enable keyboard RGB underglow
 RGB_MATRIX_ENABLE = yes
 RGB_MATRIX_DRIVER = WS2812
-UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output
 
 LAYOUTS = ortho_4x4 numpad_4x4

keyboards/30wer/rules.mk

@@ -16,5 +16,4 @@ COMMAND_ENABLE = no         # Commands for debug and configuration
 NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 AUDIO_ENABLE = no           # Audio output
-UNICODE_ENABLE = no         # Unicode
 RGBLIGHT_ENABLE = no 		# Enable WS2812 RGB underlight.

keyboards/40percentclub/25/rules.mk

@@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output
 
 # Enable generic behavior for split boards

keyboards/40percentclub/4pack/rules.mk

@@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output

keyboards/40percentclub/4x4/rules.mk

@@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output
 
 LAYOUTS = ortho_4x4 ortho_4x12

keyboards/40percentclub/5x5/rules.mk

@@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard RGB underglow
-UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output
 
 LAYOUTS = ortho_5x15

keyboards/40percentclub/6lit/rules.mk

@@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output
 
 # Enable generic behavior for split boards

keyboards/40percentclub/foobar/rules.mk

@@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output
 
 # Enable generic behavior for split boards

keyboards/40percentclub/gherkin/keymaps/via/keymap.c

@@ -0,0 +1,45 @@
+/*
+Copyright 2021 keebnewb
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [0] = LAYOUT_ortho_3x10(
+    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,
+    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_ESC,
+    KC_Z,    KC_X,    KC_C,    KC_V,    KC_BSPC, KC_SPC,  KC_B,    KC_N,    KC_M,    KC_ENT
+  ),
+
+  [1] = LAYOUT_ortho_3x10(
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+  ),
+
+  [2] = LAYOUT_ortho_3x10(
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+  ),
+
+  [3] = LAYOUT_ortho_3x10(
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+  )
+};

keyboards/40percentclub/gherkin/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes

keyboards/40percentclub/half_n_half/rules.mk

@@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output
 
 # Enable generic behavior for split boards

keyboards/40percentclub/i75/rules.mk

@@ -12,7 +12,6 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output
 
 LAYOUTS = ortho_5x15

keyboards/40percentclub/mf68/rules.mk

@@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes            # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output
 
 LAYOUTS = 68_ansi

keyboards/40percentclub/nein/rules.mk

@@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output

keyboards/40percentclub/nori/rules.mk

@@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
-UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output
 
 LAYOUTS = ortho_4x4 ortho_4x12

keyboards/40percentclub/ut47/rules.mk

@@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output
 
 # custom matrix setup

keyboards/4pplet/aekiso60/rev_a/rules.mk

@@ -19,4 +19,3 @@ NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output
-UNICODE_ENABLE = no         # Unicode

keyboards/4pplet/steezy60/rev_a/rules.mk

@@ -19,4 +19,3 @@ NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output
-UNICODE_ENABLE = no         # Unicode

keyboards/4pplet/waffling60/rev_a/rules.mk

@@ -19,4 +19,3 @@ NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output
-UNICODE_ENABLE = no         # Unicode

keyboards/7c8/framework/rules.mk

@@ -13,7 +13,6 @@ SLEEP_LED_ENABLE = no
 NKRO_ENABLE = no
 BACKLIGHT_ENABLE = no
 RGBLIGHT_ENABLE = no
-UNICODE_ENABLE = no
 AUDIO_ENABLE = no
 FAUXCLICKY_ENABLE = no
 LAYOUTS_HAS_RGB = no

keyboards/7skb/rules.mk

@@ -16,7 +16,6 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 AUDIO_ENABLE = no           # Audio output
-UNICODE_ENABLE = no         # Unicode
 RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight. 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend

keyboards/a_dux/a_dux.h

@@ -38,7 +38,7 @@
         { L01, L02, L03, L04, L05 }, \
         { L06, L07, L08, L09, L10 }, \
         { L11, L12, L13, L14, L15 }, \
-        { L16, L17, ___, ___ , ___}, \
+        { L16, L17, ___, ___, ___ }, \
         { R01, R02, R03, R04, R05 }, \
         { R06, R07, R08, R09, R10 }, \
         { R11, R12, R13, R14, R15 }, \

keyboards/a_dux/config.h

@@ -47,7 +47,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     { B4, B5, NO_PIN, NO_PIN, NO_PIN } \
 }
 
-#define DIRECT_PINS_RIGHT  { \
+#define DIRECT_PINS_RIGHT { \
     { F4, B2, F7, D2, C6 }, \
     { F5, B3, F6, D0, D7 }, \
     { B6, B1, D3, D4, E6 }, \
@@ -74,3 +74,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define SOFT_SERIAL_PIN D1
 
 #define EE_HANDS
+
+/* Top left key on left half */
+#define BOOTMAGIC_LITE_ROW 0
+#define BOOTMAGIC_LITE_COLUMN 0
+/* Top right key on right half */
+#define BOOTMAGIC_LITE_ROW_RIGHT 4
+#define BOOTMAGIC_LITE_COLUMN_RIGHT 4

keyboards/a_dux/keymaps/daliusd/config.h

@@ -0,0 +1,32 @@
+/*
+Copyright 2021 Dalius Dobravolskas <dalius.dobravolskas@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#define UNICODE_SELECTED_MODES UC_MAC, UC_LNX
+
+#define MOUSEKEY_INTERVAL 12
+#define MOUSEKEY_MAX_SPEED 6
+#define MOUSEKEY_TIME_TO_MAX 50
+
+#define MOUSEKEY_DELAY 20
+// It makes sense to use the same delay for the mouseweel
+#define MOUSEKEY_WHEEL_DELAY 100
+// The default is 100
+#define MOUSEKEY_WHEEL_INTERVAL 50
+// The default is 40
+#define MOUSEKEY_WHEEL_TIME_TO_MAX 100

keyboards/a_dux/keymaps/daliusd/keymap.c

@@ -0,0 +1,349 @@
+/* Copyright 2021 @daliusd
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+#include "oneshot.h"
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+enum layers {
+    _QWERTY,
+    _SYM,
+    _NAV,
+    _NUMB,
+    _TMUX,
+    _MOUSE,
+    _MISC,
+    _FUNC,
+};
+
+enum custom_keycodes {
+  TM_NEXT = SAFE_RANGE,
+  TM_PREV,
+  TM_LEFT,
+  TM_RIGHT,
+  TM_NEW,
+  TM_SLCT,
+  TM_SRCH,
+  TM_URL,
+  OS_CTRL,
+  OS_ALT,
+  OS_GUI,
+  OS_TMUX,
+  OS_MISC,
+  OS_FUNC,
+};
+
+// Shortcut to make keymap more readable
+
+#define L_NAV       MO(_NAV)
+#define L_SYM       MO(_SYM)
+#define L_MOUSE     TG(_MOUSE)
+
+#define K_PRINT     (QK_LCTL | QK_LSFT | QK_LGUI | KC_4)
+
+enum unicode_names {
+    SNEK,
+    EURO,
+    LT_S_A,
+    LT_L_A,
+    LT_S_C,
+    LT_L_C,
+    LT_S_E1,
+    LT_L_E1,
+    LT_S_E2,
+    LT_L_E2,
+    LT_S_I,
+    LT_L_I,
+    LT_S_S,
+    LT_L_S,
+    LT_S_U1,
+    LT_L_U1,
+    LT_S_U2,
+    LT_L_U2,
+    LT_S_Z,
+    LT_L_Z,
+    LT_OB,
+    LT_CB,
+};
+
+const uint32_t PROGMEM unicode_map[] = {
+    [SNEK]  = 0x1F40D, // 🐍
+    [EURO]  = 0x20ac, // €
+    [LT_S_A] = 0x105, // ą
+    [LT_L_A] = 0x104, // Ą
+    [LT_S_C] = 0x10d, // č
+    [LT_L_C] = 0x10c, // Č
+    [LT_S_E1] = 0x119, // ę
+    [LT_L_E1] = 0x118, // Ę
+    [LT_S_E2] = 0x117, // ė
+    [LT_L_E2] = 0x116, // Ė
+    [LT_S_I] = 0x12f, // į
+    [LT_L_I] = 0x12e, // Į
+    [LT_S_S] = 0x161, // š
+    [LT_L_S] = 0x160, // Š'
+    [LT_S_U1] = 0x173, // ų
+    [LT_L_U1] = 0x172, // Ų
+    [LT_S_U2] = 0x16b, // ū
+    [LT_L_U2] = 0x16a, // Ū
+    [LT_S_Z] = 0x17e, // ž
+    [LT_L_Z] = 0x17d, // Ž
+    [LT_OB] = 0x201e, // „
+    [LT_CB] = 0x201c, // “
+};
+
+#define K_SNEK      X(SNEK)
+#define K_EURO      X(EURO)
+#define K_LT_A      XP(LT_S_A, LT_L_A)
+#define K_LT_C      XP(LT_S_C, LT_L_C)
+#define K_LT_E1     XP(LT_S_E1, LT_L_E1)
+#define K_LT_E2     XP(LT_S_E2, LT_L_E2)
+#define K_LT_I      XP(LT_S_I, LT_L_I)
+#define K_LT_S      XP(LT_S_S, LT_L_S)
+#define K_LT_U1     XP(LT_S_U1, LT_L_U1)
+#define K_LT_U2     XP(LT_S_U2, LT_L_U2)
+#define K_LT_Z      XP(LT_S_Z, LT_L_Z)
+#define K_LT_OB     X(LT_OB)
+#define K_LT_CB     X(LT_CB)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_QWERTY] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┐                         ┌────────┬────────┬────────┬────────┬────────┐
+     KC_Q    ,KC_W    ,KC_E    ,KC_R    ,KC_T,                              KC_Y    ,KC_U    ,KC_I    ,KC_O    ,KC_P    ,
+  //├────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┤
+     KC_A    ,KC_S    ,KC_D    ,KC_F    ,KC_G    ,                          KC_H    ,KC_J    ,KC_K    ,KC_L    ,KC_SCLN ,
+  //├────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┤
+     KC_Z    ,KC_X    ,KC_C    ,KC_V    ,KC_B    ,                          KC_N    ,KC_M    ,KC_COMM ,KC_DOT  ,KC_SLSH,
+  //└────────┴────────┴────────┴────┬───┴────┬───┼────────┐       ┌────────┼───┬────┴───┬────┴────────┴────────┴────────┘
+                                     L_NAV   ,    KC_SPC  ,        KC_LSFT ,    L_SYM
+  //                                └────────┘   └────────┘       └────────┘   └────────┘
+  ),
+
+  [_SYM] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┐                         ┌────────┬────────┬────────┬────────┬────────┐
+     KC_EXLM ,KC_AT   ,KC_HASH ,KC_DLR  ,KC_PERC ,                          KC_CIRC ,KC_AMPR ,KC_ASTR ,KC_LPRN ,KC_RPRN ,
+  //├────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┤
+     KC_GRV  ,KC_PLUS ,KC_LBRC ,KC_RBRC ,K_LT_OB ,                          KC_MINS ,OS_ALT  ,OS_CTRL ,OS_GUI  ,KC_PIPE ,
+  //├────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┤
+     K_SNEK  ,KC_EQL  ,KC_LCBR ,KC_RCBR ,K_LT_CB ,                          KC_UNDS ,KC_QUOT ,KC_DQT  ,K_EURO  ,KC_BSLS ,
+  //└────────┴────────┴────────┴────┬───┴────┬───┼────────┐       ┌────────┼───┬────┴───┬────┴────────┴────────┴────────┘
+                                     _______ ,    _______ ,        _______ ,    _______
+  //                                └────────┘   └────────┘       └────────┘   └────────┘
+  ),
+
+  [_NAV] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┐                         ┌────────┬────────┬────────┬────────┬────────┐
+     KC_TILDE,L_MOUSE ,OS_FUNC ,OS_MISC ,OS_TMUX ,                          K_LT_A  ,K_LT_C  ,K_LT_E1 ,K_LT_E2 ,K_LT_I  ,
+  //├────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┤
+     KC_TAB  ,OS_GUI  ,OS_CTRL ,OS_ALT  ,KC_ENT  ,                          KC_LEFT ,KC_DOWN ,KC_UP   ,KC_RIGHT,KC_END  ,
+  //├────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┤
+     KC_DELT ,KC_BSPC ,KC_ESC  ,KC_PGDN ,KC_PGUP ,                          KC_HOME ,K_LT_S  ,K_LT_U1 ,K_LT_U2 ,K_LT_Z  ,
+  //└────────┴────────┴────────┴────┬───┴────┬───┼────────┐       ┌────────┼───┬────┴───┬────┴────────┴────────┴────────┘
+                                     _______ ,    _______ ,        _______ ,    _______
+  //                                └────────┘   └────────┘       └────────┘   └────────┘
+  ),
+
+  [_NUMB] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┐                         ┌────────┬────────┬────────┬────────┬────────┐
+     KC_1    ,KC_2    ,KC_3    ,KC_4    ,KC_5    ,                          XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,
+  //├────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┤
+     KC_6    ,KC_7    ,KC_8    ,KC_9    ,KC_0    ,                          XXXXXXX ,OS_ALT  ,OS_CTRL ,OS_GUI  ,XXXXXXX ,
+  //├────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┤
+     KC_DELT ,KC_BSPC ,XXXXXXX ,XXXXXXX ,XXXXXXX ,                          XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,
+  //└────────┴────────┴────────┴────┬───┴────┬───┼────────┐       ┌────────┼───┬────┴───┬────┴────────┴────────┴────────┘
+                                     _______ ,    _______ ,        _______ ,    _______
+  //                                └────────┘   └────────┘       └────────┘   └────────┘
+  ),
+
+  [_TMUX] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┐                         ┌────────┬────────┬────────┬────────┬────────┐
+     XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,                          XXXXXXX ,TM_URL  ,XXXXXXX ,XXXXXXX ,XXXXXXX ,
+  //├────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┤
+     XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,                          TM_LEFT ,TM_NEXT ,TM_PREV ,TM_RIGHT,XXXXXXX ,
+  //├────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┤
+     XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,                          TM_NEW  ,TM_SLCT ,XXXXXXX ,XXXXXXX ,TM_SRCH ,
+  //└────────┴────────┴────────┴────┬───┴────┬───┼────────┐       ┌────────┼───┬────┴───┬────┴────────┴────────┴────────┘
+                                     XXXXXXX ,    XXXXXXX ,        XXXXXXX ,    XXXXXXX
+  //                                └────────┘   └────────┘       └────────┘   └────────┘
+  ),
+
+  [_MOUSE] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┐                         ┌────────┬────────┬────────┬────────┬────────┐
+     XXXXXXX ,L_MOUSE ,KC_MS_U ,KC_BTN3 ,KC_WH_U ,                          XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,
+  //├────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┤
+     XXXXXXX ,KC_MS_L ,KC_MS_D ,KC_MS_R ,KC_WH_D ,                          XXXXXXX ,KC_LALT ,KC_LCTL ,KC_LGUI ,XXXXXXX ,
+  //├────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┤
+     XXXXXXX ,XXXXXXX ,KC_ESC  ,XXXXXXX ,XXXXXXX ,                          XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,
+  //└────────┴────────┴────────┴────┬───┴────┬───┼────────┐       ┌────────┼───┬────┴───┬────┴────────┴────────┴────────┘
+                                     KC_BTN1 ,    KC_BTN2 ,        XXXXXXX ,    XXXXXXX
+  //                                └────────┘   └────────┘       └────────┘   └────────┘
+  ),
+
+  [_MISC] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┐                         ┌────────┬────────┬────────┬────────┬────────┐
+     RESET   ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,                          KC_BRID ,KC_BRIU ,XXXXXXX ,KC_PSCR ,K_PRINT ,
+  //├────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┤
+     XXXXXXX ,XXXXXXX ,DEBUG   ,XXXXXXX ,XXXXXXX ,                          KC_MPRV ,KC_MPLY ,XXXXXXX ,KC_MNXT ,XXXXXXX ,
+  //├────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┤
+     XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,                          KC_VOLD ,KC_VOLU ,XXXXXXX ,XXXXXXX ,UC_MOD  ,
+  //└────────┴────────┴────────┴────┬───┴────┬───┼────────┐       ┌────────┼───┬────┴───┬────┴────────┴────────┴────────┘
+                                     XXXXXXX ,    XXXXXXX ,        XXXXXXX ,    XXXXXXX
+  //                                └────────┘   └────────┘       └────────┘   └────────┘
+  ),
+
+  [_FUNC] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┐                         ┌────────┬────────┬────────┬────────┬────────┐
+     XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,                          KC_F1   ,KC_F2   ,KC_F3   ,KC_F4   ,KC_F5   ,
+  //├────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┤
+     XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,                          KC_F6   ,KC_F7   ,KC_F8   ,KC_F9   ,KC_F10  ,
+  //├────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┤
+     XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,                          KC_F11  ,KC_F12  ,XXXXXXX ,XXXXXXX ,XXXXXXX ,
+  //└────────┴────────┴────────┴────┬───┴────┬───┼────────┐       ┌────────┼───┬────┴───┬────┴────────┴────────┴────────┘
+                                     XXXXXXX ,    XXXXXXX ,        XXXXXXX ,    XXXXXXX
+  //                                └────────┘   └────────┘       └────────┘   └────────┘
+  ),
+};
+
+#define TMUX_PREFIX SS_DOWN(X_LCTL) "b" SS_UP(X_LCTL)
+
+bool is_oneshot_cancel_key(uint16_t keycode) {
+    switch (keycode) {
+    case L_SYM:
+    case L_NAV:
+        return true;
+    default:
+        return false;
+    }
+}
+
+bool is_oneshot_layer_cancel_key(uint16_t keycode) {
+    switch (keycode) {
+    case L_SYM:
+    case L_NAV:
+        return true;
+    default:
+        return false;
+    }
+}
+
+bool is_oneshot_ignored_key(uint16_t keycode) {
+    switch (keycode) {
+    case L_SYM:
+    case L_NAV:
+    case OS_CTRL:
+    case OS_ALT:
+    case OS_GUI:
+    case OS_TMUX:
+    case OS_MISC:
+    case KC_LSFT:
+        return true;
+    default:
+        return false;
+    }
+}
+
+bool is_oneshot_mod_key(uint16_t keycode) {
+    switch (keycode) {
+    case OS_CTRL:
+    case OS_ALT:
+    case OS_GUI:
+        return true;
+    default:
+        return false;
+    }
+}
+
+oneshot_state os_ctrl_state = os_up_unqueued;
+oneshot_state os_alt_state = os_up_unqueued;
+oneshot_state os_cmd_state = os_up_unqueued;
+oneshot_state os_tmux_state = os_up_unqueued;
+oneshot_state os_misc_state = os_up_unqueued;
+oneshot_state os_func_state = os_up_unqueued;
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    update_oneshot(
+        &os_ctrl_state, KC_LCTL, OS_CTRL,
+        keycode, record
+    );
+    update_oneshot(
+        &os_alt_state, KC_LALT, OS_ALT,
+        keycode, record
+    );
+    update_oneshot(
+        &os_cmd_state, KC_LGUI, OS_GUI,
+        keycode, record
+    );
+
+    bool handled = true;
+    handled = update_oneshot_layer(
+        &os_tmux_state, _TMUX, OS_TMUX,
+        keycode, record
+    ) & handled;
+
+    handled = update_oneshot_layer(
+        &os_misc_state, _MISC, OS_MISC,
+        keycode, record
+    ) & handled;
+
+    handled = update_oneshot_layer(
+        &os_func_state, _FUNC, OS_FUNC,
+        keycode, record
+    ) & handled;
+    if (!handled) return false;
+
+    switch (keycode) {
+        case TM_LEFT:
+            if (!record->event.pressed) return true;
+            SEND_STRING(TMUX_PREFIX "<");
+            return false;
+        case TM_RIGHT:
+            if (!record->event.pressed) return true;
+            SEND_STRING(TMUX_PREFIX ">");
+            return false;
+        case TM_NEXT:
+            if (!record->event.pressed) return true;
+            SEND_STRING(TMUX_PREFIX "n");
+            return false;
+        case TM_PREV:
+            if (!record->event.pressed) return true;
+            SEND_STRING(TMUX_PREFIX "p");
+            return false;
+        case TM_NEW:
+            if (!record->event.pressed) return true;
+            SEND_STRING(TMUX_PREFIX "c");
+            return false;
+        case TM_SLCT:
+            if (!record->event.pressed) return true;
+            SEND_STRING(TMUX_PREFIX "[");
+            return false;
+        case TM_SRCH:
+            if (!record->event.pressed) return true;
+            SEND_STRING(TMUX_PREFIX "\t");
+            return false;
+        case TM_URL:
+            if (!record->event.pressed) return true;
+            SEND_STRING(TMUX_PREFIX SS_LCTL("u"));
+            return false;
+    }
+    return true;
+}
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+    return update_tri_layer_state(state, _SYM, _NAV, _NUMB);
+}

keyboards/a_dux/keymaps/daliusd/oneshot.c

@@ -0,0 +1,195 @@
+/* Copyright 2021 @daliusd
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "print.h"
+#include "oneshot.h"
+
+void update_oneshot(
+    oneshot_state *state,
+    uint16_t mod,
+    uint16_t trigger,
+    uint16_t keycode,
+    keyrecord_t *record
+) {
+    if (keycode == trigger) {
+        if (record->event.pressed) {
+            // Trigger keydown
+            if (*state == os_up_unqueued) {
+                register_code(mod);
+            }
+            *state = os_down_unused;
+            dprintf("trigger down (on?), mod: %d, ? -> os_down_unused\n", mod);
+        } else {
+            // Trigger keyup
+            switch (*state) {
+            case os_down_unused:
+                // If we didn't use the mod while trigger was held, queue it.
+                *state = os_up_queued;
+                dprintf("trigger up, mod: %d, os_down_unused -> os_up_queued\n", mod);
+                break;
+            case os_down_used:
+                // If we did use the mod while trigger was held, unregister it.
+                *state = os_up_unqueued;
+                unregister_code(mod);
+                dprintf("trigger up (off), mod: %d, os_down_used -> os_up_unqueued\n", mod);
+                break;
+            default:
+                break;
+            }
+        }
+    } else {
+        if (record->event.pressed) {
+            if (is_oneshot_cancel_key(keycode) && *state != os_up_unqueued) {
+                // Cancel oneshot on designated cancel keydown.
+                *state = os_up_unqueued;
+                unregister_code(mod);
+                dprintf("cancel (off), mod: %d, ? -> os_up_unqueued\n", mod);
+            }
+            if (!is_oneshot_ignored_key(keycode)) {
+                switch (*state) {
+                case os_up_queued:
+                    *state = os_up_queued_used;
+                    dprintf("key up (off), mod: %d, os_up_queued -> os_up_queued_used\n", mod);
+                    break;
+                case os_up_queued_used:
+                    *state = os_up_unqueued;
+                    unregister_code(mod);
+                    dprintf("key up (off), mod: %d, os_up_queued_used -> os_up_unqueued\n", mod);
+                    break;
+                default:
+                    break;
+                }
+            }
+        } else {
+            if (!is_oneshot_ignored_key(keycode)) {
+                // On non-ignored keyup, consider the oneshot used.
+                switch (*state) {
+                case os_down_unused:
+                    *state = os_down_used;
+                    dprintf("key up, mod: %d, os_down_unused -> os_down_used\n", mod);
+                    break;
+                case os_up_queued:
+                    *state = os_up_unqueued;
+                    unregister_code(mod);
+                    dprintf("key up (off), mod: %d, os_up_queued -> os_up_unqueued\n", mod);
+                    break;
+                case os_up_queued_used:
+                    *state = os_up_unqueued;
+                    unregister_code(mod);
+                    dprintf("key up (off), mod: %d, os_up_queued_used -> os_up_unqueued\n", mod);
+                    break;
+                default:
+                    break;
+                }
+            }
+        }
+    }
+}
+
+bool update_oneshot_layer(
+    oneshot_state *state,
+    uint16_t layer,
+    uint16_t trigger,
+    uint16_t keycode,
+    keyrecord_t *record
+) {
+    if (keycode == trigger) {
+        if (record->event.pressed) {
+            // Trigger keydown
+            if (*state == os_up_unqueued) {
+                layer_on(layer);
+            }
+            *state = os_down_unused;
+            dprintf("trigger down (on?), layer: %d, ? -> os_down_unused\n", layer);
+            return false;
+        } else {
+            // Trigger keyup
+            switch (*state) {
+            case os_down_unused:
+                // If we didn't use the layer while trigger was held, queue it.
+                *state = os_up_queued;
+                dprintf("trigger up, layer: %d, os_down_unused -> os_up_queued\n", layer);
+                return false;
+            case os_down_used:
+                // If we did use the layer while trigger was held, turn off it.
+                *state = os_up_unqueued;
+                layer_off(layer);
+                dprintf("trigger up (off), layer: %d, os_down_used -> os_up_unqueued\n", layer);
+                return false;
+            default:
+                break;
+            }
+        }
+    } else {
+        if (record->event.pressed) {
+            if (is_oneshot_layer_cancel_key(keycode) && *state != os_up_unqueued) {
+                // Cancel oneshot layer on designated cancel keydown.
+                *state = os_up_unqueued;
+                layer_off(layer);
+                dprintf("cancel (off), layer: %d, ? -> os_up_unqueued\n", layer);
+                return false;
+            }
+            uint8_t key_layer = read_source_layers_cache(record->event.key);
+            if (key_layer == layer) {
+                // On non-ignored keyup, consider the oneshot used.
+                switch (*state) {
+                case os_down_unused:
+                    *state = os_down_used;
+                    dprintf("key down, layer: %d, os_down_unused -> os_down_used\n", layer);
+                    return true;
+                case os_up_queued:
+                    if (is_oneshot_mod_key(keycode)) {
+                        *state = os_up_unqueued;
+                        layer_off(layer);
+                        dprintf("key down, layer: %d, os_up_queued -> os_up_unqueued\n", layer);
+                        return false;
+                    } else {
+                        *state = os_up_queued_used;
+                        dprintf("key down, layer: %d, os_up_queued -> os_up_queued_used\n", layer);
+                    }
+                    return true;
+               case os_up_queued_used:
+                    *state = os_up_unqueued;
+                    layer_off(layer);
+                    dprintf("key down (off), layer: %d, os_up_queued_used -> os_up_unqueued\n", layer);
+                    return false;
+                default:
+                    break;
+                }
+            }
+        } else {
+            // Ignore key ups from other layers
+            uint8_t key_layer = read_source_layers_cache(record->event.key);
+            if (key_layer == layer) {
+                // On non-ignored keyup, consider the oneshot used.
+                switch (*state) {
+                case os_up_queued:
+                    *state = os_up_unqueued;
+                    layer_off(layer);
+                    dprintf("key up (off), layer: %d, os_up_queued -> os_up_unqueued\n", layer);
+                    return true;
+                case os_up_queued_used:
+                    *state = os_up_unqueued;
+                    layer_off(layer);
+                    dprintf("key up (off), layer: %d, os_up_queued_used -> os_up_unqueued\n", layer);
+                    return true;
+                default:
+                    break;
+                }
+            }
+        }
+    }
+    return true;
+}

keyboards/a_dux/keymaps/daliusd/oneshot.h

@@ -0,0 +1,65 @@
+/* Copyright 2021 @daliusd
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include QMK_KEYBOARD_H
+
+// Represents the four states a oneshot key can be in
+typedef enum {
+    os_up_unqueued,
+    os_up_queued,
+    os_up_queued_used,
+    os_down_unused,
+    os_down_used,
+} oneshot_state;
+
+// Custom oneshot mod implementation that doesn't rely on timers. If a mod is
+// used while it is held it will be unregistered on keyup as normal, otherwise
+// it will be queued and only released after the next non-mod keyup.
+void update_oneshot(
+    oneshot_state *state,
+    uint16_t mod,
+    uint16_t trigger,
+    uint16_t keycode,
+    keyrecord_t *record
+);
+
+// Oneshot implementation for layers
+bool update_oneshot_layer(
+    oneshot_state *state,
+    uint16_t layer,
+    uint16_t trigger,
+    uint16_t keycode,
+    keyrecord_t *record
+);
+
+// To be implemented by the consumer. Layers one shot implementation needs to
+// know which keys are used as oneshot mods
+bool is_oneshot_mod_key(
+    uint16_t keycode
+);
+
+// To be implemented by the consumer. Defines keys to cancel oneshot mods.
+bool is_oneshot_cancel_key(uint16_t keycode);
+
+// To be implemented by the consumer. Defines keys to cancel oneshot layers.
+bool is_oneshot_layer_cancel_key(uint16_t keycode);
+
+// To be implemented by the consumer. Defines keys to ignore when determining
+// whether a oneshot mod has been used. Setting this to modifiers and layer
+// change keys allows stacking multiple oneshot modifiers, and carrying them
+// between layers.
+bool is_oneshot_ignored_key(uint16_t keycode);

keyboards/a_dux/keymaps/daliusd/readme.md

@@ -0,0 +1,21 @@
+# My 34 keys layout
+
+This are my principles for layout:
+
+* I am using Callum style layout. Here you can read explanation by
+  Callum himself and his reasoning for not using mod-tap:
+  [here](../../../../users/callum/readme.md)
+
+* There should be only one way to type key. Key can be on
+  different layer but it must maintain its physical location.
+
+* The less features are used the better.
+
+* trilayer is cool.
+
+* There is 🐍 key for no reason.
+
+As well I have added one shot layers compatible with Callum's one
+shot keys.
+
+There is simple TMUX layer as well.

keyboards/a_dux/keymaps/daliusd/rules.mk

@@ -0,0 +1,5 @@
+UNICODE_ENABLE = no
+UNICODEMAP_ENABLE = yes
+#CONSOLE_ENABLE = yes
+
+SRC += oneshot.c

keyboards/a_dux/readme.md

@@ -31,7 +31,7 @@ Make examples for this keyboard (after setting up your build environment):
 
 Enter the bootloader in 3 ways:
 
-* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard. (With `EE_HANDS` configured, hold down the top right key on the right half to place the right controller in bootloader mode)
 * **Physical reset**: Briefly short the RST and GND pins on the microcontroller using tweezers, a paperclip, or any other conductive material.
 * **Keycode in layout**: Press the key mapped to `RESET` if it is available
 

keyboards/a_dux/rules.mk

@@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
 MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug

keyboards/abstract/ellipse/rev1/rules.mk

@@ -18,6 +18,5 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
-UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output
 ENCODER_ENABLE = yes		# Enable support for rotary encoders

keyboards/acheron/shark/rules.mk

@@ -19,7 +19,6 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output
 
 LAYOUTS = ortho_4x12

keyboards/adkb96/rules.mk

@@ -16,7 +16,6 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
 AUDIO_ENABLE = no           # Audio output
-UNICODE_ENABLE = no         # Unicode
 RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight. 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend

keyboards/aeboards/aegis/rules.mk

@@ -17,5 +17,4 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = yes            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output

keyboards/aeboards/ext65/rev1/rules.mk

@@ -17,5 +17,4 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = yes            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output

keyboards/ai03/equinox/rev0/rules.mk

@@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output

keyboards/ai03/equinox/rev1/rules.mk

@@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output

keyboards/ai03/jp60/config.h

@@ -0,0 +1,109 @@
+/*
+Copyright 2021 ai03
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0xA103
+#define PRODUCT_ID   0x0024
+#define DEVICE_VER   0x0001
+#define MANUFACTURER ai03 Design Studio
+#define PRODUCT      JP60
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { B6, B5, B4, D7, E6 }
+#define MATRIX_COL_PINS { D2, D1, D3, D5, D4, D6, C6, F0, F1, F4, F5, F6, F7, C7 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+//#define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+//#define BOOTMAGIC_LITE_ROW 0
+//#define BOOTMAGIC_LITE_COLUMN 0

keyboards/ai03/jp60/info.json

@@ -0,0 +1,342 @@
+{
+    "keyboard_name": "JP60",
+    "url": "https://github.com/ai03-2725/JP60",
+    "maintainer": "ai03",
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {
+                    "label": "Esc",
+                    "x": 0,
+                    "y": 0
+                },
+                {
+                    "label": "!",
+                    "x": 1,
+                    "y": 0
+                },
+                {
+                    "label": "\"",
+                    "x": 2,
+                    "y": 0
+                },
+                {
+                    "label": "#",
+                    "x": 3,
+                    "y": 0
+                },
+                {
+                    "label": "$",
+                    "x": 4,
+                    "y": 0
+                },
+                {
+                    "label": "%",
+                    "x": 5,
+                    "y": 0
+                },
+                {
+                    "label": "&",
+                    "x": 6,
+                    "y": 0
+                },
+                {
+                    "label": "'",
+                    "x": 7,
+                    "y": 0
+                },
+                {
+                    "label": "(",
+                    "x": 8,
+                    "y": 0
+                },
+                {
+                    "label": ")",
+                    "x": 9,
+                    "y": 0
+                },
+                {
+                    "label": "",
+                    "x": 10,
+                    "y": 0
+                },
+                {
+                    "label": "=",
+                    "x": 11,
+                    "y": 0
+                },
+                {
+                    "label": "~",
+                    "x": 12,
+                    "y": 0
+                },
+                {
+                    "label": "|",
+                    "x": 13,
+                    "y": 0
+                },
+                {
+                    "label": "Back Space",
+                    "x": 14,
+                    "y": 0
+                },
+                {
+                    "label": "Tab",
+                    "x": 0,
+                    "y": 1,
+                    "w": 1.5
+                },
+                {
+                    "label": "Q",
+                    "x": 1.5,
+                    "y": 1
+                },
+                {
+                    "label": "W",
+                    "x": 2.5,
+                    "y": 1
+                },
+                {
+                    "label": "E",
+                    "x": 3.5,
+                    "y": 1
+                },
+                {
+                    "label": "R",
+                    "x": 4.5,
+                    "y": 1
+                },
+                {
+                    "label": "T",
+                    "x": 5.5,
+                    "y": 1
+                },
+                {
+                    "label": "Y",
+                    "x": 6.5,
+                    "y": 1
+                },
+                {
+                    "label": "U",
+                    "x": 7.5,
+                    "y": 1
+                },
+                {
+                    "label": "I",
+                    "x": 8.5,
+                    "y": 1
+                },
+                {
+                    "label": "O",
+                    "x": 9.5,
+                    "y": 1
+                },
+                {
+                    "label": "P",
+                    "x": 10.5,
+                    "y": 1
+                },
+                {
+                    "label": "`",
+                    "x": 11.5,
+                    "y": 1
+                },
+                {
+                    "label": "{",
+                    "x": 12.5,
+                    "y": 1
+                },
+                {
+                    "label": "Enter",
+                    "x": 13.75,
+                    "y": 1,
+                    "w": 1.25,
+                    "h": 2
+                },
+                {
+                    "label": "Fn",
+                    "x": 0,
+                    "y": 2,
+                    "w": 1.75
+                },
+                {
+                    "label": "A",
+                    "x": 1.75,
+                    "y": 2
+                },
+                {
+                    "label": "S",
+                    "x": 2.75,
+                    "y": 2
+                },
+                {
+                    "label": "D",
+                    "x": 3.75,
+                    "y": 2
+                },
+                {
+                    "label": "F",
+                    "x": 4.75,
+                    "y": 2
+                },
+                {
+                    "label": "G",
+                    "x": 5.75,
+                    "y": 2
+                },
+                {
+                    "label": "H",
+                    "x": 6.75,
+                    "y": 2
+                },
+                {
+                    "label": "J",
+                    "x": 7.75,
+                    "y": 2
+                },
+                {
+                    "label": "K",
+                    "x": 8.75,
+                    "y": 2
+                },
+                {
+                    "label": "L",
+                    "x": 9.75,
+                    "y": 2
+                },
+                {
+                    "label": "+",
+                    "x": 10.75,
+                    "y": 2
+                },
+                {
+                    "label": "*",
+                    "x": 11.75,
+                    "y": 2
+                },
+                {
+                    "label": "}",
+                    "x": 12.75,
+                    "y": 2
+                },
+                {
+                    "label": "Shift",
+                    "x": 0,
+                    "y": 3,
+                    "w": 2.25
+                },
+                {
+                    "label": "Z",
+                    "x": 2.25,
+                    "y": 3
+                },
+                {
+                    "label": "X",
+                    "x": 3.25,
+                    "y": 3
+                },
+                {
+                    "label": "C",
+                    "x": 4.25,
+                    "y": 3
+                },
+                {
+                    "label": "V",
+                    "x": 5.25,
+                    "y": 3
+                },
+                {
+                    "label": "B",
+                    "x": 6.25,
+                    "y": 3
+                },
+                {
+                    "label": "N",
+                    "x": 7.25,
+                    "y": 3
+                },
+                {
+                    "label": "M",
+                    "x": 8.25,
+                    "y": 3
+                },
+                {
+                    "label": "<",
+                    "x": 9.25,
+                    "y": 3
+                },
+                {
+                    "label": ">",
+                    "x": 10.25,
+                    "y": 3
+                },
+                {
+                    "label": "?",
+                    "x": 11.25,
+                    "y": 3
+                },
+                {
+                    "label": "_",
+                    "x": 12.25,
+                    "y": 3
+                },
+                {
+                    "label": "Shift",
+                    "x": 13.25,
+                    "y": 3,
+                    "w": 1.75
+                },
+                {
+                    "label": "Ctrl",
+                    "x": 0,
+                    "y": 4,
+                    "w": 1.25
+                },
+                {
+                    "label": "Win",
+                    "x": 1.25,
+                    "y": 4
+                },
+                {
+                    "label": "Alt",
+                    "x": 2.25,
+                    "y": 4
+                },
+                {
+                    "label": "\u7121\u5909\u63db",
+                    "x": 3.25,
+                    "y": 4,
+                    "w": 1.25
+                },
+                {
+                    "label": "",
+                    "x": 4.5,
+                    "y": 4,
+                    "w": 6
+                },
+                {
+                    "label": "\u5909\u63db",
+                    "x": 10.5,
+                    "y": 4,
+                    "w": 1.25
+                },
+                {
+                    "label": "\u304b\u306a",
+                    "x": 11.75,
+                    "y": 4
+                },
+                {
+                    "label": "\u534a\u89d2 \u5168\u89d2 \u6f22\u5b57",
+                    "x": 12.75,
+                    "y": 4
+                },
+                {
+                    "label": "Caps Lock",
+                    "x": 13.75,
+                    "y": 4,
+                    "w": 1.25
+                }
+            ]
+        }
+    }
+}

keyboards/ai03/jp60/jp60.c

@@ -0,0 +1,17 @@
+/* Copyright 2021 ai03
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "jp60.h"

keyboards/ai03/jp60/jp60.h

@@ -0,0 +1,42 @@
+/* Copyright 2021 ai03
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K212, \
+    K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112,             \
+    K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K113,       K213, \
+    K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312,       K313, \
+    K400, K401, K402, K403,                   K407,                   K410, K411, K412, K413  \
+) \
+{ \
+    { K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013 }, \
+    { K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113 }, \
+    { K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213 }, \
+    { K300,  KC_NO, K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313 }, \
+    { K400,  K401,  K402,  K403,  KC_NO, KC_NO, KC_NO, K407,  KC_NO, KC_NO, K410,  K411,  K412,  K413 }  \
+}

keyboards/ai03/jp60/keymaps/default/config.h

@@ -0,0 +1,21 @@
+/* Copyright 2021 ai03
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/* Increase polling rates and scan quantity for improved performance */
+#define USB_POLLING_INTERVAL_MS 1
+#define QMK_KEYS_PER_SCAN 12

keyboards/ai03/jp60/keymaps/default/keymap.c

@@ -0,0 +1,40 @@
+/* Copyright 2021 ai03
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+#include "keymap_jp.h"
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE,
+    _FN
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [_BASE] = LAYOUT( /* Base */
+        KC_ESC,  JP_1,    JP_2,    JP_3,    JP_4,    JP_5,    JP_6,    JP_7,    JP_8,    JP_9,    JP_0,    JP_MINS, JP_CIRC, JP_YEN,  KC_DEL,
+        KC_TAB,  JP_Q,    JP_W,    JP_E,    JP_R,    JP_T,    JP_Y,    JP_U,    JP_I,    JP_O,    JP_P,    JP_AT,   JP_LBRC,                  
+        MO(1),   JP_A,    JP_S,    JP_D,    JP_F,    JP_G,    JP_H,    JP_J,    JP_K,    JP_L,    JP_SCLN, JP_COLN, JP_RBRC,          KC_ENT,
+        KC_LSFT,          JP_Z,    JP_X,    JP_C,    JP_V,    JP_B,    JP_N,    JP_M,    JP_COMM, JP_DOT,  JP_SLSH, JP_BSLS,          KC_RSFT,
+        KC_LCTL, KC_LGUI, KC_LALT, JP_MHEN,                            KC_SPC,                             JP_HENK, JP_KANA, JP_ZKHK, JP_EISU
+    ),
+    [_FN] = LAYOUT( /* FN */
+        RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______,
+        _______, _______, KC_PGUP, _______, _______, _______, _______, _______, KC_UP,   _______, _______, _______, _______,          
+        _______, KC_HOME, KC_PGDN, KC_END,  _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______,          _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______, _______, _______, _______,                            _______,                            _______, _______, _______, _______
+    )
+};

keyboards/ai03/jp60/keymaps/default/readme.md

@@ -0,0 +1,3 @@
+# The default keymap for JP60
+
+Configured for JIS input.  

keyboards/ai03/jp60/keymaps/default/rules.mk

@@ -0,0 +1 @@
+DEBOUNCE_TYPE = asym_eager_defer_pk # Specify per-key debounce for improved responsiveness

keyboards/ai03/jp60/keymaps/via/config.h

@@ -0,0 +1,21 @@
+/* Copyright 2021 ai03
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/* Increase polling rates and scan quantity for improved performance */
+#define USB_POLLING_INTERVAL_MS 1
+#define QMK_KEYS_PER_SCAN 12

keyboards/ai03/jp60/keymaps/via/keymap.c

@@ -0,0 +1,57 @@
+/* Copyright 2021 ai03
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+#include "keymap_jp.h"
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE,
+    _FN1,
+    _FN2,
+    _FN3
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [_BASE] = LAYOUT( /* Base */
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_JYEN, KC_DEL,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,                  
+        MO(1),   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NUHS,          KC_ENT,
+        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RO,            KC_RSFT,
+        KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN,                            KC_SPC,                             KC_HENK, KC_KANA, KC_GRV,  KC_CAPS
+    ),
+    [_FN1] = LAYOUT( /* FN1 */
+        RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______,
+        _______, _______, KC_PGUP, _______, _______, _______, _______, _______, KC_UP,   _______, _______, _______, _______, 
+        _______, KC_HOME, KC_PGDN, KC_END,  _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______,          _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______, _______, _______, _______,                            _______,                            _______, _______, _______, _______
+    ),
+    [_FN2] = LAYOUT( /* FN2 */
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______, _______, _______, _______,                            _______,                            _______, _______, _______, _______
+    ),
+    [_FN3] = LAYOUT( /* FN3 */
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______, _______, _______, _______,                            _______,                            _______, _______, _______, _______
+    ),
+
+};

keyboards/ai03/jp60/keymaps/via/readme.md

@@ -0,0 +1,3 @@
+# The via keymap for JP60
+
+For use with VIA configurator and compatible keymap editors.  

keyboards/ai03/jp60/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes                    # Enable compatibility with VIA-protocol configurators
+DEBOUNCE_TYPE = asym_eager_defer_pk # Specify per-key debounce for improved responsiveness

keyboards/ai03/jp60/readme.md

@@ -0,0 +1,27 @@
+# JP60
+
+![JP60](https://github.com/ai03-2725/JP60/raw/main/Render/Front.png)
+
+GH60-compatible JIS-like hotswap keyboard PCB
+
+* Keyboard Maintainer: [ai03](https://github.com/ai03-2725)
+* Hardware Supported: [JP60 PCB](https://github.com/ai03-2725/JP60)
+* Hardware Availability: To be made available in JP market soon; will be listed in the repo above
+
+Make example for this keyboard (after setting up your build environment):
+
+    make ai03/jp60:default
+
+Flashing example for this keyboard:
+
+    make ai03/jp60:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available

keyboards/ai03/jp60/rules.mk

@@ -0,0 +1,22 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+LTO_ENABLE = yes            # Optimize firmware at link time

keyboards/ai03/lunar/rules.mk

@@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output

keyboards/ai03/orbit/rules.mk

@@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output
 USE_I2C = no                # I2C for split communication
 CUSTOM_MATRIX = yes			# For providing custom matrix.c (in this case, override regular matrix.c with split matrix.c)

keyboards/ai03/quasar/rules.mk

@@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output

keyboards/ai03/soyuz/rules.mk

@@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output
 
 LAYOUTS = ortho_5x4 numpad_5x4

keyboards/akb/eb46/rules.mk

@@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output

keyboards/akb/raine/rules.mk

@@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output

keyboards/alf/dc60/rules.mk

@@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
-UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output

keyboards/alf/x11/rules.mk

@@ -18,6 +18,5 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
-UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output
 EXTRAFLAGS += -flto

keyboards/amjkeyboard/amj66/rules.mk

@@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
-UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output
 
 LAYOUTS = 66_ansi 66_iso

keyboards/amjpad/rules.mk

@@ -16,6 +16,5 @@ NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https:/
 RGBLIGHT_ENABLE = no   # Enable keyboard underlight functionality
 BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
 AUDIO_ENABLE = no
-UNICODE_ENABLE = no 		# Unicode
 
 LAYOUTS = numpad_6x4 ortho_6x4

keyboards/angel17/alpha/rules.mk

@@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output
 
 LAYOUTS = numpad_5x4

keyboards/angel17/rev1/rules.mk

@@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
-UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output
 
 LAYOUTS = numpad_5x4

keyboards/angel17/rules.mk

@@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output
 
 LAYOUTS = numpad_5x4

keyboards/angel64/rules.mk

@@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
-UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output
 OLED_ENABLE = yes
 OLED_DRIVER = SSD1306

keyboards/aos/tkl/rules.mk

@@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
-UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output

keyboards/ash1800/rules.mk

@@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output

keyboards/ashpil/modelm_usbc/rules.mk

@@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output

keyboards/atreus/keymaps/manna-harbour_miryoku/config.h

@@ -1,6 +1,6 @@
 // Copyright 2019 Manna Harbour
 // https://github.com/manna-harbour/miryoku
-// generated from users/manna-harbour_miryoku/miryoku.org  -*- buffer-read-only: t -*-
+// generated -*- buffer-read-only: t -*-
 
 // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>.
 

keyboards/atreus/keymaps/manna-harbour_miryoku/keymap.c

@@ -1,5 +1,5 @@
 // Copyright 2019 Manna Harbour
 // https://github.com/manna-harbour/miryoku
-// generated from users/manna-harbour_miryoku/miryoku.org  -*- buffer-read-only: t -*-
+// generated -*- buffer-read-only: t -*-
 
 // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>.

keyboards/atreus/keymaps/via/keymap.c

@@ -0,0 +1,65 @@
+/* Copyright 2021 Leonardus Dipa
+ * 
+ * This program is free software: you can redistribute it and/or modify 
+ * it under the terms of the GNU General Public License as published by 
+ * the Free Software Foundation, either version 2 of the License, or 
+ * (at your option) any later version. 
+ * 
+ * This program is distributed in the hope that it will be useful, 
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of 
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
+ * GNU General Public License for more details. 
+ * 
+ * You should have received a copy of the GNU General Public License 
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>. 
+ */
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+enum custom_layers {
+    _QW,
+    _RS,
+    _LW,
+    _EM,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QW] = LAYOUT( /* Qwerty */
+    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                      KC_Y,    KC_U,    KC_I,    KC_O,    KC_P    ,
+    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,                      KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN ,
+    KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,                      KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH ,
+    KC_ESC, KC_TAB, KC_LGUI,  KC_LSFT, KC_BSPC,  KC_LCTL, KC_LALT, KC_SPC,  MO(_RS), KC_MINS, KC_QUOT, KC_ENT
+  ),
+
+  /*
+   *  !       @     up     {    }        ||     pgup    7     8     9    *
+   *  #     left   down  right  $        ||     pgdn    4     5     6    +
+   *  [       ]      (     )    &        ||       `     1     2     3    \
+   * lower  insert super shift bksp ctrl || alt space   fn    .     0    =
+   */
+  [_RS] = LAYOUT( /* [> RAISE <] */
+    KC_EXLM, KC_AT,   KC_UP,   KC_LCBR, KC_RCBR,                   KC_PGUP, KC_7,    KC_8,   KC_9, KC_ASTR ,
+    KC_HASH, KC_LEFT, KC_DOWN, KC_RGHT, KC_DLR,                    KC_PGDN, KC_4,    KC_5,   KC_6, KC_PLUS ,
+    KC_LBRC, KC_RBRC, KC_LPRN, KC_RPRN, KC_AMPR,                   KC_GRV,  KC_1,    KC_2,   KC_3, KC_BSLS ,
+    TG(_LW), KC_INS,  KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_LALT, KC_SPC,  KC_TRNS, KC_DOT, KC_0, KC_EQL  ),
+  /*
+   * insert home   up  end   pgup       ||      up     F7    F8    F9   F10
+   *  del   left  down right pgdn       ||     down    F4    F5    F6   F11
+   *       volup             reset      ||             F1    F2    F3   F12
+   *       voldn  super shift bksp ctrl || alt space   L0  prtsc scroll pause
+   */
+  [_LW] = LAYOUT( /* [> LOWER <] */
+    KC_INS,  KC_HOME, KC_UP,   KC_END,  KC_PGUP,                   KC_UP,   KC_F7,   KC_F8,   KC_F9,   KC_F10  ,
+    KC_DEL,  KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN,                   KC_DOWN, KC_F4,   KC_F5,   KC_F6,   KC_F11  ,
+    KC_NO,   KC_VOLU, KC_NO,   KC_NO,   RESET,                     KC_NO,   KC_F1,   KC_F2,   KC_F3,   KC_F12  ,
+    KC_NO,   KC_VOLD, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_LALT, KC_SPC,  TO(_QW), KC_PSCR, KC_SLCK, KC_PAUS ),
+
+  [_EM] = LAYOUT( /* [> EMPTY <] */
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS  ,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS  ,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS  ,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS  )
+};

keyboards/atreus/keymaps/via/rules.mk

@@ -0,0 +1,4 @@
+LTO_ENABLE=yes
+VIA_ENABLE = yes
+
+MOUSEKEY_ENABLE = no

keyboards/atreus/promicro/config.h

@@ -28,6 +28,8 @@
  *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
  *
 */
+
+/* key matrix pins */
 #define MATRIX_ROW_PINS { F4, B2, B4, B5 }
 #if defined(PCBDOWN)
   #define MATRIX_COL_PINS { D0, D4, C6, D7, E6, B6, B3, B1, F7, F6, F5 }

keyboards/baguette/rules.mk

@@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output

keyboards/bantam44/rules.mk

@@ -16,5 +16,3 @@ COMMAND_ENABLE = yes    # Commands for debug and configuration
 # SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
 # NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 # BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
-MIDI_ENABLE = no              # MIDI support
-# UNICODE_ENABLE = YES 		# Unicode