Make the MAGIC_TOGGLE_GUI keycode work (#14886)

The old custom matrix code for Preonic rev3 was relying on the
`matrix_col_t` type, because the code actually reads the row pins and
assembles the state for whole columns, and then transposes the matrix in
the custom debouncing code.  Restore that type (which is no longer
defined by the core QMK code) to make the custom matrix code work
properly (when `matrix_row_t` was used instead of `matrix_col_t`, the
state of two electrical rows was lost, and those electrical rows
corresponded to the bottom physical row, which did not work).

.vscode/extensions.json

@@ -5,7 +5,6 @@
     "xaver.clang-format",
     "ms-vscode.cpptools",
     "bierner.github-markdown-preview",
-    "donjayamanne.git-extension-pack",
-    "CoenraadS.bracket-pair-colorizer-2"
+    "donjayamanne.git-extension-pack"
   ]
 }

docs/feature_stenography.md

@@ -129,7 +129,8 @@ As defined in `keymap_steno.h`.
 |`STN_RES2`||(GeminiPR only)|
 |`STN_PWR`||(GeminiPR only)|
 
-If you do not want to hit two keys with one finger combined keycodes can be used. These are also defined in `keymap_steno.h`, and causes both keys to be reported as pressed or released. To use these keycodes define `STENO_COMBINEDMAP` in your `config.h` file 
+If you do not want to hit two keys with one finger combined keycodes can be used. These are also defined in `keymap_steno.h`, and causes both keys to be reported as pressed or released. To use these keycodes define `STENO_COMBINEDMAP` in your `config.h` file.
+
 |Combined key   | Key1   | Key 2    |
 |---------------|--------|----------|
 |STN_S3         | STN_S1 | STN_S2   |

docs/internals_gpio_control.md

@@ -4,7 +4,7 @@ QMK has a GPIO control abstraction layer which is microcontroller agnostic. This
 
 ## Functions :id=functions
 
-The following functions can provide basic control of GPIOs and are found in `quantum/quantum.h`.
+The following functions provide basic control of GPIOs and are found in `tmk_core/common/<platform>/gpio.h`.
 
 |Function                |Description                                       | Old AVR Examples                                | Old ChibiOS/ARM Examples                        |
 |------------------------|--------------------------------------------------|-------------------------------------------------|-------------------------------------------------|

docs/ja/ja_doc_status.sh

@@ -0,0 +1,34 @@
+#! /bin/sh
+#
+# Script to display the Japanese translation status of documents
+#
+if [ ! -d docs/ja ]; then
+    echo "'docs/ja' not found."
+    echo "do:"
+    echo "  cd \$(QMK_TOP)"
+    echo "  ./docs/ja/ja_doc_status.sh"
+    exit 1
+fi
+
+en_docs=`cd docs;ls -1 [a-z]*.md`
+ja_docs=`cd docs/ja;ls -1 [a-z]*.md`
+en_count=`echo $en_docs | wc -w`
+ja_count=`echo $ja_docs | wc -w`
+echo "English documents  $en_count files."
+echo "Japanese documents $ja_count files."
+
+echo "Files that have not been translated yet:"
+for docfile in $en_docs
+do
+    if [ ! -f docs/ja/$docfile ]; then
+        wc docs/$docfile
+    fi
+done | sort
+echo "Files that have not been updated yet:"
+grep --no-filename "^[ ]*git diff" docs/ja/*.md | while read cmd
+do
+  cline=`echo $cmd | sh | wc -l`
+  if [ $cline -gt 0 ]; then
+    echo "$cline $cmd"
+ fi
+done | sort

docs/reference_info_json.md

@@ -9,33 +9,39 @@ You can create `info.json` files at every level under `qmk_firmware/keyboards/<n
 The `info.json` file is a JSON formatted dictionary with the following keys available to be set. You do not have to set all of them, merely the keys that apply to your keyboard.
 
 * `keyboard_name`
-  * A free-form text string describing the keyboard.
-  * Example: `Clueboard 66%`
+    * A free-form text string describing the keyboard.
+    * Example: `Clueboard 66%`
+* `manufacturer`
+    * A free-form text string describing the keyboard's manufacturer.
+    * Example: `Clueboard`
 * `url`
-  * A URL to the keyboard's product page, [QMK.fm/keyboards](https://qmk.fm/keyboards) page, or other page describing information about the keyboard.
+    * A URL to the keyboard's product page, [QMK.fm/keyboards](https://qmk.fm/keyboards) page, or other page describing information about the keyboard.
+    * Example: `https://clueboard.co`
 * `maintainer`
-  * GitHub username of the maintainer, or `qmk` for community maintained boards
+    * GitHub username of the maintainer, or `qmk` for community maintained boards.
+    * Example: `skullydazed`
 * `debounce`
-  * How many milliseconds (ms) to wait for debounce to happen. (Default: 5)
+    * The amount of time in milliseconds to wait for debounce to happen.
+    * Default: `5`
 * `diode_direction`
-  * The direction diodes face. See [`DIRECT_PINS` in the hardware configuration](https://docs.qmk.fm/#/config_options?id=hardware-options) for more details.
+    * The direction diodes face. See [`DIRECT_PINS` in the hardware configuration](https://docs.qmk.fm/#/config_options?id=hardware-options) for more details.
 * `layout_aliases`
-  * A dictionary containing layout aliases. The key is the alias and the value is a layout in `layouts` it maps to.
+    * A dictionary containing layout aliases. The key is the alias and the value is a layout in `layouts` it maps to.
 * `layouts`
-  * Physical Layout representations. See the [Layout Format](#layout_format) section for more detail.
+    * Physical Layout representations. See the [Layout Format](#layout_format) section for more detail.
 * `matrix_pins`
-  * Configure the pins corresponding to columns and rows, or direct pins. See [Matrix Pins](#matrix_pins) for more detail.
+    * Configure the pins corresponding to columns and rows, or direct pins. See the [Matrix Pins](#matrix_pins) section for more detail.
 * `rgblight`
-  * Configure the [RGB Lighting feature](feature_rgblight.md). See the [RGB Lighting](#rgb_lighting) section for more detail.
+    * Configure the [RGB Lighting feature](feature_rgblight.md). See the [RGB Lighting](#rgb_lighting) section for more detail.
 * `usb`
-  * Configure USB VID, PID, and other parameters. See [USB](#USB) for more detail.
+    * Configure USB VID, PID, and other parameters. See the [USB](#USB) section for more detail.
 
 ### Layout Format
 
 Within our `info.json` file the `layouts` portion of the dictionary contains several nested dictionaries. The outer layer consists of QMK layout macros, for example `LAYOUT_ansi` or `LAYOUT_iso`.
 
 * `layout`
-  * A list of Key Dictionaries describing the physical layout. See the next section for more details.
+    * A list of Key Dictionaries describing the physical layout. See the next section for more details.
 
 ### Key Dictionary Format
 
@@ -44,18 +50,20 @@ Each Key Dictionary in a layout describes the physical properties of a key. If y
 All key positions and rotations are specified in relation to the top-left corner of the keyboard, and the top-left corner of each key.
 
 * `x`
-  * **Required**: The absolute position of the key in the horizontal axis, in Key Units.
+    * **Required**. The absolute position of the key in the horizontal axis, in Key Units.
 * `y`
-  * **Required**: The absolute position of the key in the vertical axis, in Key Units.
+    * **Required**. The absolute position of the key in the vertical axis, in Key Units.
 * `w`
-  * The width of the key, in Key Units. Ignored if `ks` is provided. Default: `1`
+    * The width of the key, in Key Units.
+    * Default: `1`
 * `h`
-  * The height of the key, in Key Units. Ignored if `ks` is provided. Default: `1`
+    * The height of the key, in Key Units.
+    * Default: `1`
 * `label`
-  * What to name this position in the matrix.
-  * This should usually correspond to the keycode for the first layer of the default keymap.
+    * What to name this position in the matrix. This should usually correspond to the keycode for the first layer of the default keymap.
 * `matrix`
-  * A 2 item list describing the row and column location for this key.
+    * A two item list describing the row and column location for this key.
+    * Example: `[0, 4]`
 
 ### Matrix Pins
 
@@ -69,11 +77,11 @@ Example:
 
 ```json
 {
-  "diode_direction": "COL2ROW",
-  "matrix_pins": {
-    "cols": ["F4", "E6", "B1", "D2"],
-    "rows": ["B0", "D3", "D5", "D4", "D6"]
-  }
+    "diode_direction": "COL2ROW",
+    "matrix_pins": {
+        "cols": ["F4", "E6", "B1", "D2"],
+        "rows": ["B0", "D3", "D5", "D4", "D6"]
+    }
 }
 ```
 
@@ -144,23 +152,23 @@ Example:
 }
 ```
 
-#### RGB Light Animations
+#### RGBLight Animations
 
 The following animations can be enabled:
 
-| Key | Description |
-|-----|-------------|
-| `all` | Enable all additional animation modes. |
-| `alternating` | Enable alternating animation mode. |
-| `breathing` | Enable breathing animation mode. |
-| `christmas` | Enable christmas animation mode. |
-| `knight` | Enable knight animation mode. |
-| `rainbow_mood` | Enable rainbow mood animation mode. |
-| `rainbow_swirl` | Enable rainbow swirl animation mode. |
-| `rgb_test` | Enable RGB test animation mode. |
-| `snake` | Enable snake animation mode. |
-| `static_gradient` | Enable static gradient mode. |
-| `twinkle` | Enable twinkle animation mode. |
+|Key              |Description                           |
+|-----------------|--------------------------------------|
+|`all`            |Enable all additional animation modes.|
+|`alternating`    |Enable alternating animation mode.    |
+|`breathing`      |Enable breathing animation mode.      |
+|`christmas`      |Enable christmas animation mode.      |
+|`knight`         |Enable knight animation mode.         |
+|`rainbow_mood`   |Enable rainbow mood animation mode.   |
+|`rainbow_swirl`  |Enable rainbow swirl animation mode.  |
+|`rgb_test`       |Enable RGB test animation mode.       |
+|`snake`          |Enable snake animation mode.          |
+|`static_gradient`|Enable static gradient mode.          |
+|`twinkle`        |Enable twinkle animation mode.        |
 
 ### USB
 
@@ -170,10 +178,10 @@ Example:
 
 ```json
 {
-  "usb": {
-    "vid": "0xC1ED",
-    "pid": "0x23B0",
-    "device_ver": "0x0001"
-  }
+    "usb": {
+        "vid": "0xC1ED",
+        "pid": "0x23B0",
+        "device_ver": "0x0001"
+    }
 }
 ```

keyboards/40percentclub/gherkin/keymaps/via/keymap.c

@@ -0,0 +1,45 @@
+/*
+Copyright 2021 keebnewb
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [0] = LAYOUT_ortho_3x10(
+    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,
+    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_ESC,
+    KC_Z,    KC_X,    KC_C,    KC_V,    KC_BSPC, KC_SPC,  KC_B,    KC_N,    KC_M,    KC_ENT
+  ),
+
+  [1] = LAYOUT_ortho_3x10(
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+  ),
+
+  [2] = LAYOUT_ortho_3x10(
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+  ),
+
+  [3] = LAYOUT_ortho_3x10(
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+  )
+};

keyboards/40percentclub/gherkin/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes

keyboards/atreus/keymaps/manna-harbour_miryoku/config.h

@@ -1,6 +1,6 @@
 // Copyright 2019 Manna Harbour
 // https://github.com/manna-harbour/miryoku
-// generated from users/manna-harbour_miryoku/miryoku.org  -*- buffer-read-only: t -*-
+// generated -*- buffer-read-only: t -*-
 
 // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>.
 

keyboards/atreus/keymaps/manna-harbour_miryoku/keymap.c

@@ -1,5 +1,5 @@
 // Copyright 2019 Manna Harbour
 // https://github.com/manna-harbour/miryoku
-// generated from users/manna-harbour_miryoku/miryoku.org  -*- buffer-read-only: t -*-
+// generated -*- buffer-read-only: t -*-
 
 // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>.

keyboards/bastardkb/scylla/keymaps/manna-harbour_miryoku/config.h

@@ -0,0 +1,24 @@
+// Copyright 2019 Manna Harbour
+// https://github.com/manna-harbour/miryoku
+// generated -*- buffer-read-only: t -*-
+
+// This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+#pragma once
+
+#define XXX KC_NO
+
+#define LAYOUT_miryoku( \
+     K00, K01, K02, K03, K04,                K05, K06, K07, K08, K09, \
+     K10, K11, K12, K13, K14,                K15, K16, K17, K18, K19, \
+     K20, K21, K22, K23, K24,                K25, K26, K27, K28, K29, \
+     N30, N31, K32, K33, K34,                K35, K36, K37, N38, N39 \
+) \
+LAYOUT_split_4x6_5( \
+XXX, XXX, XXX, XXX, XXX, XXX,                XXX, XXX, XXX, XXX, XXX, XXX, \
+XXX, K00, K01, K02, K03, K04,                K05, K06, K07, K08, K09, XXX, \
+XXX, K10, K11, K12, K13, K14,                K15, K16, K17, K18, K19, XXX, \
+XXX, K20, K21, K22, K23, K24,                K25, K26, K27, K28, K29, XXX, \
+               K32, K33, K34,                K35, K36, K37, \
+                    XXX, XXX,                XXX, XXX \
+)

keyboards/bastardkb/scylla/keymaps/manna-harbour_miryoku/keymap.c

@@ -0,0 +1,5 @@
+// Copyright 2019 Manna Harbour
+// https://github.com/manna-harbour/miryoku
+// generated -*- buffer-read-only: t -*-
+
+// This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>.

keyboards/contra/keymaps/default/keymap.c

@@ -222,10 +222,8 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         #ifdef BACKLIGHT_ENABLE
           backlight_step();
         #endif
-        PORTE &= ~(1<<6);
       } else {
         unregister_code(KC_RSFT);
-        PORTE |= (1<<6);
       }
       return false;
       break;

keyboards/ergotravel/keymaps/manna-harbour_miryoku/config.h

@@ -1,6 +1,6 @@
 // Copyright 2019 Manna Harbour
 // https://github.com/manna-harbour/miryoku
-// generated from users/manna-harbour_miryoku/miryoku.org  -*- buffer-read-only: t -*-
+// generated -*- buffer-read-only: t -*-
 
 // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>.
 

keyboards/ergotravel/keymaps/manna-harbour_miryoku/keymap.c

@@ -1,5 +1,5 @@
 // Copyright 2019 Manna Harbour
 // https://github.com/manna-harbour/miryoku
-// generated from users/manna-harbour_miryoku/miryoku.org  -*- buffer-read-only: t -*-
+// generated -*- buffer-read-only: t -*-
 
 // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>.

keyboards/fjlabs/mk61rgbansi/config.h

@@ -0,0 +1,121 @@
+/*
+Copyright 2021 <me@fjlaboratories.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0x7074 // FJLabs
+#define PRODUCT_ID   0x1011 // mk61-rgb-ansi
+#define DEVICE_VER   0x0001 // Version 1
+#define MANUFACTURER    Mechanical Keyboards LLC
+#define PRODUCT         MK61-RGB-ANSI
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *         ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+
+// Checked with Eagle Schematic
+#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6  }
+#define MATRIX_COL_PINS { C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, B3, B2, B1 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* Define RGB Underglow */
+#define RGB_DI_PIN F7
+#define RGBLED_NUM 64
+#define RGBLIGHT_EFFECT_BREATHING
+#define RGBLIGHT_EFFECT_RAINBOW_MOOD
+#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+#define RGBLIGHT_EFFECT_SNAKE
+#define RGBLIGHT_EFFECT_KNIGHT
+#define RGBLIGHT_EFFECT_CHRISTMAS
+#define RGBLIGHT_EFFECT_STATIC_GRADIENT
+#define RGBLIGHT_EFFECT_RGB_TEST
+#define RGBLIGHT_EFFECT_ALTERNATING
+#define RGBLIGHT_EFFECT_TWINKLE
+#define RGBLIGHT_LIMIT_VAL 108
+#define RGB_VAL_STEP 12
+#define RGBLIGHT_DEFAULT_SPD 144
+#define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_SWIRL
+/* #define RGBLIGHT_LAYER_BLINK*/
+
+/* Define less important options */
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION

keyboards/fjlabs/mk61rgbansi/info.json

@@ -0,0 +1,76 @@
+{
+    "keyboard_name": "MK61-RGB-ANSI",
+    "url": "https://www.fjlaboratories.com/",
+    "maintainer": "Mechanical Keyboards, LLC",
+    "layouts": {
+        "LAYOUT_60_ansi": {
+            "layout": [
+                {"x": 0, "y": 0},
+                {"x": 1, "y": 0},
+                {"x": 2, "y": 0},
+                {"x": 3, "y": 0},
+                {"x": 4, "y": 0},
+                {"x": 5, "y": 0},
+                {"x": 6, "y": 0},
+                {"x": 7, "y": 0},
+                {"x": 8, "y": 0},
+                {"x": 9, "y": 0},
+                {"x": 10, "y": 0},
+                {"x": 11, "y": 0},
+                {"x": 12, "y": 0},
+                {"x": 13, "y": 0, "w": 2},
+
+                {"x": 0, "y": 1, "w": 1.5},
+                {"x": 1.5, "y": 1},
+                {"x": 2.5, "y": 1},
+                {"x": 3.5, "y": 1},
+                {"x": 4.5, "y": 1},
+                {"x": 5.5, "y": 1},
+                {"x": 6.5, "y": 1},
+                {"x": 7.5, "y": 1},
+                {"x": 8.5, "y": 1},
+                {"x": 9.5, "y": 1},
+                {"x": 10.5, "y": 1},
+                {"x": 11.5, "y": 1},
+                {"x": 12.5, "y": 1},
+                {"x": 13.5, "y": 1, "w": 1.5},
+
+                {"x": 0, "y": 2, "w": 1.75},
+                {"x": 1.75, "y": 2},
+                {"x": 2.75, "y": 2},
+                {"x": 3.75, "y": 2},
+                {"x": 4.75, "y": 2},
+                {"x": 5.75, "y": 2},
+                {"x": 6.75, "y": 2},
+                {"x": 7.75, "y": 2},
+                {"x": 8.75, "y": 2},
+                {"x": 9.75, "y": 2},
+                {"x": 10.75, "y": 2},
+                {"x": 11.75, "y": 2},
+                {"x": 12.75, "y": 2, "w": 2.25},
+
+                {"x": 0, "y": 3, "w": 2.25},
+                {"x": 2.25, "y": 3},
+                {"x": 3.25, "y": 3},
+                {"x": 4.25, "y": 3},
+                {"x": 5.25, "y": 3},
+                {"x": 6.25, "y": 3},
+                {"x": 7.25, "y": 3},
+                {"x": 8.25, "y": 3},
+                {"x": 9.25, "y": 3},
+                {"x": 10.25, "y": 3},
+                {"x": 11.25, "y": 3},
+                {"x": 12.25, "y": 3, "w": 2.75},
+                
+                {"x": 0, "y": 4, "w": 1.25},
+                {"x": 1.25, "y": 4, "w": 1.25},
+                {"x": 2.5, "y": 4, "w": 1.25},
+                {"x": 3.75, "y": 4, "w": 6.25},
+                {"x": 10, "y": 4, "w": 1.25},
+                {"x": 11.25, "y": 4, "w": 1.25},
+                {"x": 12.5, "y": 4, "w": 1.25},
+                {"x": 13.75, "y": 4, "w": 1.25}
+            ]
+        }
+    }
+}

keyboards/fjlabs/mk61rgbansi/keymaps/default/keymap.c

@@ -0,0 +1,40 @@
+/*
+Copyright 2021 <me@fjlaboratories.com>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+enum layers {
+    _LAYER0,
+    _LAYER1,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    [_LAYER0] = LAYOUT_60_ansi(
+        KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
+        KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, 
+        KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, 
+        KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, 
+        KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTRL
+    ),
+
+    [_LAYER1] = LAYOUT_60_ansi(
+        KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, 
+        KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUSE, RESET, 
+        KC_TRNS, RGB_SPI, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, NK_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    )
+
+};

keyboards/fjlabs/mk61rgbansi/keymaps/via/keymap.c

@@ -0,0 +1,58 @@
+/*
+Copyright 2021 <me@fjlaboratories.com>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+enum layers {
+    _LAYER0,
+    _LAYER1,
+    _LAYER2,
+    _LAYER3,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    [_LAYER0] = LAYOUT_60_ansi(
+        KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
+        KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, 
+        KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, 
+        KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, 
+        KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTRL
+    ),
+
+    [_LAYER1] = LAYOUT_60_ansi(
+        KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, 
+        KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUSE, RESET, 
+        KC_TRNS, RGB_SPI, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, NK_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    ),
+
+    [_LAYER2] = LAYOUT_60_ansi(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    ),
+
+    [_LAYER3] = LAYOUT_60_ansi(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    ),
+
+};

keyboards/fjlabs/mk61rgbansi/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/fjlabs/mk61rgbansi/mk61rgbansi.c

@@ -0,0 +1,13 @@
+/* Copyright 2021 <me@fjlaboratories.com>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "mk61rgbansi.h"

keyboards/fjlabs/mk61rgbansi/mk61rgbansi.h

@@ -0,0 +1,32 @@
+/*
+Copyright 2021 <me@fjlaboratories.com>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "quantum.h"
+
+/* MK61-RGB-ANSI Keymap Definitions */
+#define LAYOUT_60_ansi( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A,      K3C,      \
+    K40, K41, K42,           K45,                K49, K4A,      K4C, K4D  \
+) { \
+    { K00, K01, K02, K03,   K04,     K05,   K06,   K07,   K08,   K09, K0A, K0B,   K0C,   K0D   }, \
+    { K10, K11, K12, K13,   K14,     K15,   K16,   K17,   K18,   K19, K1A, K1B,   K1C,   K1D   }, \
+    { K20, K21, K22, K23,   K24,     K25,   K26,   K27,   K28,   K29, K2A, K2B,   KC_NO, K2D   }, \
+    { K30, K31, K32, K33,   K34,     K35,   K36,   K37,   K38,   K39, K3A, KC_NO, K3C,   KC_NO }, \
+    { K40, K41, K42, KC_NO, KC_NO,   K45,   KC_NO, KC_NO, KC_NO, K49, K4A, KC_NO, K4C,   K4D   }  \
+}

keyboards/fjlabs/mk61rgbansi/readme.md

@@ -0,0 +1,14 @@
+# Mechanical Keyboards, LLC MK61-RGB-ANSI 
+
+The following is the QMK Firmware for the Mechanical Keyboards, LLC MK61-RGB-ANSI PCB.
+
+---
+
+* Keyboard Maintainer: Mechanical Keyboards, LLC
+* Hardware Supported: MK61-RGB-ANSI
+
+Make example for this keyboard (after setting up your build environment):
+
+    make fjlabs/mk61-rgb-ansi:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). You can enter the bootloader by pressing the reset button on the back of the PCB.

keyboards/fjlabs/mk61rgbansi/rules.mk

@@ -0,0 +1,26 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency
+F_CPU = 8000000
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+
+LAYOUTS = 60_ansi

keyboards/for_science/keymaps/manna-harbour_miryoku/config.h

@@ -1,6 +1,6 @@
 // Copyright 2019 Manna Harbour
 // https://github.com/manna-harbour/miryoku
-// generated from users/manna-harbour_miryoku/miryoku.org  -*- buffer-read-only: t -*-
+// generated -*- buffer-read-only: t -*-
 
 // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>.
 

keyboards/for_science/keymaps/manna-harbour_miryoku/keymap.c

@@ -1,5 +1,5 @@
 // Copyright 2019 Manna Harbour
 // https://github.com/manna-harbour/miryoku
-// generated from users/manna-harbour_miryoku/miryoku.org  -*- buffer-read-only: t -*-
+// generated -*- buffer-read-only: t -*-
 
 // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>.

keyboards/fractal/keymaps/default/keymap.c

@@ -213,10 +213,8 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
             #ifdef BACKLIGHT_ENABLE
               backlight_step();
             #endif
-            PORTE &= ~(1<<6);
           } else {
             unregister_code(KC_RSFT);
-            PORTE |= (1<<6);
           }
           return false;
           break;

keyboards/gergo/keymaps/manna-harbour_miryoku/config.h

@@ -1,6 +1,6 @@
 // Copyright 2019 Manna Harbour
 // https://github.com/manna-harbour/miryoku
-// generated from users/manna-harbour_miryoku/miryoku.org  -*- buffer-read-only: t -*-
+// generated -*- buffer-read-only: t -*-
 
 // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>.
 

keyboards/gergo/keymaps/manna-harbour_miryoku/keymap.c

@@ -1,5 +1,5 @@
 // Copyright 2019 Manna Harbour
 // https://github.com/manna-harbour/miryoku
-// generated from users/manna-harbour_miryoku/miryoku.org  -*- buffer-read-only: t -*-
+// generated -*- buffer-read-only: t -*-
 
 // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>.

keyboards/gmmk/pro/ansi/keymaps/benschaeff/keymap.c

@@ -0,0 +1,127 @@
+/* Copyright 2021 Glorious, LLC <salman@pcgamingrace.com>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+enum userspace_layers {
+  QWERTY,
+	FNLAYER,
+	POPTAB,
+};
+
+//custom keycodes
+#define MODS_ALT_MASK (MOD_BIT(KC_LALT)) // Make ALT layer for encoder use 
+#define MODS_CTRL_MASK (MOD_BIT(KC_LCTL)) // Make CTRL layer for encoder use
+#define SWAP_L SGUI(KC_LEFT) // Swap application to left display
+#define SWAP_R SGUI(KC_RGHT) // Swap application to right display
+#define MINI LGUI(KC_DOWN) // Shrink window
+#define MAXI LGUI(KC_UP) // Maximize window
+#define CLOSEAPPLICATION LALT(KC_F4) // Kill application
+#define CLOSETAB LCTL(KC_W) // Kill current tab
+#define POPOUT LCTL(LSFT(KC_K))
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+//      ESC      F1       F2       F3       F4       F5       F6       F7       F8       F9       F10      F11      F12	     Prt           Rotary(Mute)
+//      ~        1        2        3        4        5        6        7        8        9        0         -       (=)	     BackSpc           Del
+//      Tab      Q        W        E        R        T        Y        U        I        O        P        [        ]        \                 PgUp
+//      Caps     A        S        D        F        G        H        J        K        L        ;        "                 Enter             PgDn
+//      Sh_L              Z        X        C        V        B        N        M        ,        .        ?                 Sh_R     Up       End
+//      Ct_L     Win_L    Alt_L                               SPACE                               Alt_R    FN       Ct_R     Left     Down     Right
+
+
+    // The FN key by default maps to a momentary toggle to layer 1 to provide access to the RESET key (to put the board into bootloader mode). Without
+    // this mapping, you have to open the case to hit the button on the bottom of the PCB (near the USB cable attachment) while plugging in the USB
+    // cable to get the board into bootloader mode - definitely not fun when you're working on your QMK builds. Remove this and put it back to KC_RGUI
+    // if that's your preference.
+    //
+    // To put the keyboard in bootloader mode, use FN+backslash. If you accidentally put it into bootloader, you can just unplug the USB cable and
+    // it'll be back to normal when you plug it back in.
+
+    [QWERTY] = LAYOUT(
+        KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_PSCR,          KC_MUTE,
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,          KC_DEL,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          KC_PGUP,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,           KC_PGDN,
+        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT, KC_UP,   KC_END,
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, MO(FNLAYER),   KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+
+    [FNLAYER] = LAYOUT(
+        CLOSEAPPLICATION, CLOSETAB,_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MEDIA_PLAY_PAUSE,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______, SWAP_L ,  MAXI  , SWAP_R , _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET  ,          _______,
+        _______, _______,  MINI  , _______, POPOUT,  _______, _______, _______, _______, _______, _______, _______,          _______,          _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______,
+        _______, _______, _______,                            _______,                            _______, _______, KC_TRNS, _______, _______, _______
+    ),
+
+
+};
+
+
+bool encoder_update_user(uint8_t index, bool clockwise) {
+    if (get_mods() & MODS_ALT_MASK) {
+        if (clockwise) {
+            tap_code(KC_TAB);
+        } else {
+            tap_code16(S(KC_TAB));
+        }
+    } else if (get_mods() & MODS_CTRL_MASK) {
+        if (clockwise) {
+            tap_code(KC_TAB);
+        } else {
+            tap_code16(S(KC_TAB));
+        }
+    } else if(IS_LAYER_ON(FNLAYER)) {
+        if (clockwise) {
+            tap_code(KC_MEDIA_NEXT_TRACK);
+        } else {
+            tap_code(KC_MEDIA_PREV_TRACK);
+        }
+    } else {
+        if (clockwise) {
+            tap_code(KC_VOLU);
+        } else {
+            tap_code(KC_VOLD);
+        }
+    }
+    return false;
+}
+
+void rgb_matrix_indicators_advanced_user(uint8_t led_min, uint8_t led_max) {
+    switch(get_highest_layer(layer_state)) {
+    // special handling per layer
+        case 0:  //layer one
+            if (host_keyboard_led_state().caps_lock)
+                rgb_matrix_set_color_all(255,0,0);
+            else
+                rgb_matrix_set_color_all(0,255,56);
+            break;
+        case 1:
+            for (uint8_t i = led_min; i < led_max; i++) {
+                 RGB_MATRIX_INDICATOR_SET_COLOR(i,0,0,0);
+            }
+            RGB_MATRIX_INDICATOR_SET_COLOR(0, 0, 0, 255) //esc
+            RGB_MATRIX_INDICATOR_SET_COLOR(6, 0, 0, 255) //f1
+            RGB_MATRIX_INDICATOR_SET_COLOR(8, 0, 0, 255) //q
+            RGB_MATRIX_INDICATOR_SET_COLOR(14, 0, 0, 255) //w
+            RGB_MATRIX_INDICATOR_SET_COLOR(20, 0, 0, 255) //e
+            RGB_MATRIX_INDICATOR_SET_COLOR(15, 0, 0, 255) //s
+            RGB_MATRIX_INDICATOR_SET_COLOR(26, 0, 0, 255) //f
+            RGB_MATRIX_INDICATOR_SET_COLOR(49, 0, 0, 255) //R_Alt
+            break;
+        default:
+            break;
+    }
+}

keyboards/gmmk/pro/ansi/keymaps/benschaeff/readme.md

@@ -0,0 +1,19 @@
+# Description
+Pretty simple keymap with a few handy tools on a 2nd layer and rotary encoder.
+
+# Encoder
+Holding tab and scrolling encoder will allow scrolling through applications, as if using alt + tab  
+Holding ctrl and scrolling encoder will allow scrolling through chrome tabs  
+FN + Encoder scroll is media next/prev  
+FN + Encoder press is media pause  
+default encoder behavior is volume up/down  
+
+# Function Layer
+FN + \ is used to put keyboard into bootloader mode  
+FN + ESC is the same as alt F4, for closing applications  
+FN + F1 is to close current browser tab  
+FN + Q moves current application one monitor to the left  
+FN + W maximizes current application  
+FN + E moves current application one monitor to the right  
+FN + S minimizes current application  
+FN + F is used in junction with the "Popout tab" extension to chrome (https://chrome.google.com/webstore/detail/popout-tab/pcfcieidiaaobigemjnkclebhnmgfbco) to pop out current tab to its own window

keyboards/handwired/dactyl_manuform/4x5/keymaps/manna-harbour_miryoku/config.h

@@ -1,6 +1,6 @@
 // Copyright 2019 Manna Harbour
 // https://github.com/manna-harbour/miryoku
-// generated from users/manna-harbour_miryoku/miryoku.org  -*- buffer-read-only: t -*-
+// generated -*- buffer-read-only: t -*-
 
 // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>.
 

keyboards/handwired/dactyl_manuform/4x5/keymaps/manna-harbour_miryoku/keymap.c

@@ -1,5 +1,5 @@
 // Copyright 2019 Manna Harbour
 // https://github.com/manna-harbour/miryoku
-// generated from users/manna-harbour_miryoku/miryoku.org  -*- buffer-read-only: t -*-
+// generated -*- buffer-read-only: t -*-
 
 // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>.

keyboards/handwired/dactyl_manuform/5x6/keymaps/manna-harbour_miryoku/config.h

@@ -1,6 +1,6 @@
 // Copyright 2019 Manna Harbour
 // https://github.com/manna-harbour/miryoku
-// generated from users/manna-harbour_miryoku/miryoku.org  -*- buffer-read-only: t -*-
+// generated -*- buffer-read-only: t -*-
 
 // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>.
 

keyboards/handwired/dactyl_manuform/5x6/keymaps/manna-harbour_miryoku/keymap.c

@@ -1,5 +1,5 @@
 // Copyright 2019 Manna Harbour
 // https://github.com/manna-harbour/miryoku
-// generated from users/manna-harbour_miryoku/miryoku.org  -*- buffer-read-only: t -*-
+// generated -*- buffer-read-only: t -*-
 
 // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>.

keyboards/handwired/nicekey/keymaps/default/keymap.c

@@ -1,75 +1,132 @@
 #include QMK_KEYBOARD_H
 
+#define RANDOM_STRING_DELAY 100
+
 enum custom_keycodes {
-  RANDOM_STRING_MACRO = SAFE_RANGE
-};
-
-const int delay = 100;
-const char *sentences[] = {
-  "I hope you have a great day!\n",
-  "You are an awesome person.\n",
-  "I wish I knew you better, you seem nice!\n",
-  "Your views restore my faith in humanity\n",
-  "You are as cool as a norm-critical disney princess\n",
-  "You have impeccable manners.\n",
-  "You are making me smile\n",
-  "You are making a difference\n",
-  "You bring out the best in other people\n",
-  "You are all that and a super-size bag of chips.\n",
-  "You are not someone I pretend to not see in public.\n",
-  "Are you a beaver, because damn.\n",
-  "I bet you make babies smile.\n",
-  "You are awkward, in a cute way. Like an elevator ride, but with puppies.\n",
-  "Looking like a complete idiot with you is really fun.\n",
-  "If you cooked something really bad, I would tell you instead of eating it.\n",
-  "I love how passionate you are about your hobby.\n",
-  "Our conversations always make me feel better.\n",
-  "It is amazing how far out of your way you go to help people.\n",
-  "I am so glad that you wrote something here.\n",
-  "Hey you! How nice to see a friendly person in my feed!\n",
-  "I hope we know each other for a long time.\n",
-  "I bet if Britney Spears knew you, 2008 would have gone a lot differently.\n",
-  "I would trust you with my passwords.\n",
-  "You are a great problem solver\n",
-  "I would love to hear you laugh!\n",
-  "Please, have a monologue about your week, I just want to listen to you!\n",
-  "You are very far from being Trump.\n",
-  "I think my dog might like you more than me\n",
-  "I feel like you would be a great person to do a group project with\n",
-  "I bet animals love you\n",
-  "I bet even Kanye would like you more than himself\n",
-  "You are just doing a great job at life\n",
-  "I like how you are challenging me.\n",
-  "You would do be a great mother!\n",
-  "I... Baked bread for you.\n",
-  "Wow. You.\n",
-  "You would not have let that balrog pass!\n",
-  "Thank you.\n",
-  "You would be standing out in a crowd\n",
-  "Your sense of style is amazing.\n",
-  "You have a beautiful mind.\n",
-  "I like that big juicy brain of yours\n",
-  "I would share my cinnamon bun with you\n",
-  "I like you more than i like my moms apple pie\n",
-  "You give me the same feeling as a summers night\n",
-  "I enjoy you more than the click of my mechanical switch\n",
-  "I would let you pop my bubble wrap\n",
-  "Being near you is like being inside of a poem\n"
-};
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  if (record->event.pressed) {
-    int sentences_size = sizeof(sentences) / sizeof(sentences[0]);
-    int i = rand() % sentences_size;
-    switch(keycode) {
-      case RANDOM_STRING_MACRO:
-        send_string_with_delay(sentences[i], delay);
-        return false;
-    }
-  }
-  return true;
+    RANDOM_STRING_MACRO = SAFE_RANGE
 };
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  LAYOUT( RANDOM_STRING_MACRO )
+    LAYOUT(
+        RANDOM_STRING_MACRO
+    )
 };
+
+const char sentence_01[] PROGMEM = "I hope you have a great day!";
+const char sentence_02[] PROGMEM = "You are an awesome person.";
+const char sentence_03[] PROGMEM = "I wish I knew you better, you seem nice!";
+const char sentence_04[] PROGMEM = "Your views restore my faith in humanity";
+const char sentence_05[] PROGMEM = "You are as cool as a norm-critical disney princess";
+const char sentence_06[] PROGMEM = "You have impeccable manners.";
+const char sentence_07[] PROGMEM = "You are making me smile";
+const char sentence_08[] PROGMEM = "You are making a difference";
+const char sentence_09[] PROGMEM = "You bring out the best in other people";
+const char sentence_10[] PROGMEM = "You are all that and a super-size bag of chips.";
+const char sentence_11[] PROGMEM = "You are not someone I pretend to not see in public.";
+const char sentence_12[] PROGMEM = "Are you a beaver, because damn.";
+const char sentence_13[] PROGMEM = "I bet you make babies smile.";
+const char sentence_14[] PROGMEM = "You are awkward, in a cute way. Like an elevator ride, but with puppies.";
+const char sentence_15[] PROGMEM = "Looking like a complete idiot with you is really fun.";
+const char sentence_16[] PROGMEM = "If you cooked something really bad, I would tell you instead of eating it.";
+const char sentence_17[] PROGMEM = "I love how passionate you are about your hobby.";
+const char sentence_18[] PROGMEM = "Our conversations always make me feel better.";
+const char sentence_19[] PROGMEM = "It is amazing how far out of your way you go to help people.";
+const char sentence_20[] PROGMEM = "I am so glad that you wrote something here.";
+const char sentence_21[] PROGMEM = "Hey you! How nice to see a friendly person in my feed!";
+const char sentence_22[] PROGMEM = "I hope we know each other for a long time.";
+const char sentence_23[] PROGMEM = "I bet if Britney Spears knew you, 2008 would have gone a lot differently.";
+const char sentence_24[] PROGMEM = "I would trust you with my passwords.";
+const char sentence_25[] PROGMEM = "You are a great problem solver";
+const char sentence_26[] PROGMEM = "I would love to hear you laugh!";
+const char sentence_27[] PROGMEM = "Please, have a monologue about your week, I just want to listen to you!";
+const char sentence_28[] PROGMEM = "You are very far from being Trump.";
+const char sentence_29[] PROGMEM = "I think my dog might like you more than me";
+const char sentence_30[] PROGMEM = "I feel like you would be a great person to do a group project with";
+const char sentence_31[] PROGMEM = "I bet animals love you";
+const char sentence_32[] PROGMEM = "I bet even Kanye would like you more than himself";
+const char sentence_33[] PROGMEM = "You are just doing a great job at life";
+const char sentence_34[] PROGMEM = "I like how you are challenging me.";
+const char sentence_35[] PROGMEM = "You would do be a great mother!";
+const char sentence_36[] PROGMEM = "I... Baked bread for you.";
+const char sentence_37[] PROGMEM = "Wow. You.";
+const char sentence_38[] PROGMEM = "You would not have let that balrog pass!";
+const char sentence_39[] PROGMEM = "Thank you.";
+const char sentence_40[] PROGMEM = "You would be standing out in a crowd";
+const char sentence_41[] PROGMEM = "Your sense of style is amazing.";
+const char sentence_42[] PROGMEM = "You have a beautiful mind.";
+const char sentence_43[] PROGMEM = "I like that big juicy brain of yours";
+const char sentence_44[] PROGMEM = "I would share my cinnamon bun with you";
+const char sentence_45[] PROGMEM = "I like you more than i like my moms apple pie";
+const char sentence_46[] PROGMEM = "You give me the same feeling as a summers night";
+const char sentence_47[] PROGMEM = "I enjoy you more than the click of my mechanical switch";
+const char sentence_48[] PROGMEM = "I would let you pop my bubble wrap";
+const char sentence_49[] PROGMEM = "Being near you is like being inside of a poem";
+
+PGM_P const sentences[] PROGMEM = {
+    sentence_01,
+    sentence_02,
+    sentence_03,
+    sentence_04,
+    sentence_05,
+    sentence_06,
+    sentence_07,
+    sentence_08,
+    sentence_09,
+    sentence_10,
+    sentence_11,
+    sentence_12,
+    sentence_13,
+    sentence_14,
+    sentence_15,
+    sentence_16,
+    sentence_17,
+    sentence_18,
+    sentence_19,
+    sentence_20,
+    sentence_21,
+    sentence_22,
+    sentence_23,
+    sentence_24,
+    sentence_25,
+    sentence_26,
+    sentence_27,
+    sentence_28,
+    sentence_29,
+    sentence_30,
+    sentence_31,
+    sentence_32,
+    sentence_33,
+    sentence_34,
+    sentence_35,
+    sentence_36,
+    sentence_37,
+    sentence_38,
+    sentence_39,
+    sentence_40,
+    sentence_41,
+    sentence_42,
+    sentence_43,
+    sentence_44,
+    sentence_45,
+    sentence_46,
+    sentence_47,
+    sentence_48,
+    sentence_49
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    if (record->event.pressed) {
+        int sentences_size = sizeof(sentences) / sizeof(sentences[0]);
+        int i = rand() % sentences_size;
+
+        switch (keycode) {
+            case RANDOM_STRING_MACRO:
+                send_string_with_delay_P((PGM_P)pgm_read_word(&(sentences[i])), RANDOM_STRING_DELAY);
+                tap_code(KC_ENT);
+
+                return false;
+        }
+    }
+
+    return true;
+}

keyboards/handwired/nicekey/readme.md

@@ -2,14 +2,13 @@
 
 ![The first NiceKey](https://s3.eu-central-1.amazonaws.com/mindlevel/nicekey.jpg)
 
-
 Custom handwired nicekey, a one key keyboard that writes random compliments.
 
-Keyboard Maintainer: [spydon](https://github.com/spydon)  
-Hardware Supported: Custom handwired one key  
-Hardware Availability:
+* Keyboard Maintainer: [spydon](https://github.com/spydon)
+* Hardware Supported: Custom handwired one key
+* Hardware Availability: n/a
 
-Switch must be connected to pins C6 and B6. 
+Switch must be connected to pins C6 and B6.
 
 Make example for this keyboard (after setting up your build environment):
 

keyboards/handwired/nicekey/rules.mk

@@ -5,12 +5,17 @@ MCU = atmega32u4
 BOOTLOADER = caterina
 
 # Build Options
-#   comment out to disable the options.
+#   change yes to no to disable
 #
 BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes	# Mouse keys
-EXTRAKEY_ENABLE = yes	# Audio control and System control
-CONSOLE_ENABLE = yes	# Console for debug
-COMMAND_ENABLE = yes    # Commands for debug and configuration
-#SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
-#NKRO_ENABLE = yes	# USB Nkey Rollover - not yet supported in LUFA
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output

keyboards/handwired/split65/info.json

@@ -0,0 +1,93 @@
+{
+    "keyboard_name": "split65",
+    "url": "https://github.com/PercyJW-2/Split65",
+    "maintainer": "PercyJW-2",
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"label":"\u00ac", "x":0, "y":0},
+                {"label":"!", "x":1, "y":0},
+                {"label":"\"", "x":2, "y":0},
+                {"label":"\u00a3", "x":3, "y":0},
+                {"label":"$", "x":4, "y":0},
+
+                {"label":"%", "x":5, "y":0},
+                {"label":"^", "x":6, "y":0},
+                {"label":"&", "x":7, "y":0},
+                {"label":"*", "x":8, "y":0},
+                {"label":"(", "x":9, "y":0},
+
+                {"label":")", "x":10, "y":0},
+                {"label":"_", "x":11, "y":0},
+                {"label":"+", "x":12, "y":0},
+                {"label":"Backspace", "x":13, "y":0, "w":2},
+                {"x":15, "y":0},
+
+                {"label":"Tab", "x":0, "y":1, "w":1.5},
+                {"label":"Q", "x":1.5, "y":1},
+                {"label":"W", "x":2.5, "y":1},
+                {"label":"E", "x":3.5, "y":1},
+                {"label":"R", "x":4.5, "y":1},
+
+                {"label":"T", "x":5.5, "y":1},
+                {"label":"Y", "x":6.5, "y":1},
+                {"label":"U", "x":7.5, "y":1},
+                {"label":"I", "x":8.5, "y":1},
+                {"label":"O", "x":9.5, "y":1},
+
+                {"label":"P", "x":10.5, "y":1},
+                {"label":"{", "x":11.5, "y":1},
+                {"label":"}", "x":12.5, "y":1},
+                {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2},
+                {"x":15, "y":1},
+
+                {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
+                {"label":"A", "x":1.75, "y":2},
+                {"label":"S", "x":2.75, "y":2},
+                {"label":"D", "x":3.75, "y":2},
+                {"label":"F", "x":4.75, "y":2},
+
+                {"label":"G", "x":5.75, "y":2},
+                {"label":"H", "x":6.75, "y":2},
+                {"label":"J", "x":7.75, "y":2},
+                {"label":"K", "x":8.75, "y":2},
+                {"label":"L", "x":9.75, "y":2},
+
+                {"label":":", "x":10.75, "y":2},
+                {"label":"@", "x":11.75, "y":2},
+                {"label":"~", "x":12.75, "y":2},
+                {"x":15, "y":2},
+                {"label":"Shift", "x":0, "y":3, "w":1.25},
+
+                {"label":"|", "x":1.25, "y":3},
+                {"label":"Z", "x":2.25, "y":3},
+                {"label":"X", "x":3.25, "y":3},
+                {"label":"C", "x":4.25, "y":3},
+                {"label":"V", "x":5.25, "y":3},
+
+                {"label":"B", "x":6.25, "y":3},
+                {"label":"N", "x":7.25, "y":3},
+                {"label":"M", "x":8.25, "y":3},
+                {"label":"<", "x":9.25, "y":3},
+                {"label":">", "x":10.25, "y":3},
+
+                {"label":"?", "x":11.25, "y":3},
+                {"label":"Shift", "x":12.25, "y":3, "w":1.75},
+                {"label":"UP", "x":14, "y":3},
+                {"x":15, "y":3},
+                {"label":"Ctrl", "x":0, "y":4, "w":1.25},
+
+                {"label":"Win", "x":1.25, "y":4, "w":1.25},
+                {"label":"Alt", "x":2.5, "y":4, "w":1.25},
+                {"x":3.75, "y":4, "w":3},
+                {"x":6.75, "y":4, "w":3.25},
+                {"label":"AltGr", "x":10, "y":4},
+
+                {"label":"Win", "x":11, "y":4},
+                {"label":"Menu", "x":12, "y":4},
+                {"label":"LEFT", "x":13, "y":4},
+                {"label":"DOWN", "x":14, "y":4},
+                {"label":"RIGHT", "x":15, "y":4}]
+        }
+    }
+}

keyboards/handwired/split65/keymaps/default/keymap.c

@@ -0,0 +1,65 @@
+/* Copyright 2020-2021 PercyJW-2 <joris.wachsmuth@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+enum layer_names {
+    _QWERTY,
+    _LOWER,
+    _RAISE,
+    _ADJUST,
+};
+
+#define LOWER  MO(_LOWER)
+#define RAISE  MO(_RAISE)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    [_QWERTY] = LAYOUT(
+        KC_GESC, KC_1,    KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9,    KC_0,   KC_MINS, KC_EQL,  KC_BSPC, KC_INS,
+        KC_TAB,  KC_Q,    KC_W, KC_E, KC_R, KC_T,       KC_Y, KC_U, KC_I,    KC_O,   KC_P,    KC_LBRC, KC_RBRC, KC_DEL,
+        KC_LCTL, KC_A,    KC_S, KC_D, KC_F, KC_G,       KC_H, KC_J, KC_K,    KC_L,   KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_PGUP,
+        KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP,   KC_PGDN,
+        KC_LCTL, KC_LGUI, KC_LALT,    KC_SPC,               KC_ENT, KC_RALT, LOWER,  RAISE,   KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+
+    [_LOWER] = LAYOUT(
+        _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______,
+        _______, _______, KC_UP,   _______, _______, _______,          _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______,          _______,                            _______, _______, _______, _______, _______, _______, _______
+    ),
+
+    [_RAISE] = LAYOUT(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______,          _______,                            _______, _______, _______, _______, _______, _______, _______
+    ),
+
+    [_ADJUST] = LAYOUT(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______,          _______,                            _______, _______, _______, _______, _______, _______, _______
+    )
+};
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+    return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+}

keyboards/handwired/split65/keymaps/via/keymap.c

@@ -0,0 +1,65 @@
+/* Copyright 2020-2021 PercyJW-2 <joris.wachsmuth@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+enum layer_names {
+    _QWERTY,
+    _LOWER,
+    _RAISE,
+    _ADJUST,
+};
+
+#define LOWER  MO(_LOWER)
+#define RAISE  MO(_RAISE)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    [_QWERTY] = LAYOUT(
+        KC_GESC, KC_1,    KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9,    KC_0,   KC_MINS, KC_EQL,  KC_BSPC, KC_INS,
+        KC_TAB,  KC_Q,    KC_W, KC_E, KC_R, KC_T,       KC_Y, KC_U, KC_I,    KC_O,   KC_P,    KC_LBRC, KC_RBRC, KC_DEL,
+        KC_LCTL, KC_A,    KC_S, KC_D, KC_F, KC_G,       KC_H, KC_J, KC_K,    KC_L,   KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_PGUP,
+        KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP,   KC_PGDN,
+        KC_LCTL, KC_LGUI, KC_LALT,    KC_SPC,               KC_ENT, KC_RALT, LOWER,  RAISE,   KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+
+    [_LOWER] = LAYOUT(
+        _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______,
+        _______, _______, KC_UP,   _______, _______, _______,          _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______,          _______,                            _______, _______, _______, _______, _______, _______, _______
+    ),
+
+    [_RAISE] = LAYOUT(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______,          _______,                            _______, _______, _______, _______, _______, _______, _______
+    ),
+
+    [_ADJUST] = LAYOUT(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______,          _______,                            _______, _______, _______, _______, _______, _______, _______
+    )
+};
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+    return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+}

keyboards/handwired/split65/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/handwired/split65/promicro/config.h

@@ -0,0 +1,53 @@
+/* Copyright 2020-2021 PercyJW-2 <joris.wachsmuth@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+
+#include "config_common.h"
+
+// USB Device descriptor parameter
+#define VENDOR_ID     0x4A57 // JW
+#define PRODUCT_ID    0x0000 // first keeb
+#define DEVICE_VER    0x0000 // first revision
+#define MANUFACTURER  percyjw
+#define PRODUCT       split65
+
+// Matrix Assignments
+#define MATRIX_ROWS 10 //Rows are doubled-up
+#define MATRIX_COLS 8
+
+#define MATRIX_COL_PINS {F4, F5, F6, F7, B1, B3, B2, B6}
+#define MATRIX_ROW_PINS {D4, C6, D7, E6, B4}
+
+// COL2ROW, ROW2COL
+#define DIODE_DIRECTION COL2ROW
+
+#define MATRIX_IO_DELAY 5
+
+// Split Keyboard specifics
+#define SOFT_SERIAL_PIN D3
+#define SELECT_SOFT_SERIAL_SPEED 1
+
+// Debounce to reduce unintended double-presses use 0 if not needed
+#define DEBOUNCE 5
+
+// Feature diable options
+//#define NO_DEBUG
+//#define NO_PRINT
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+#define OLED_DISPLAY_128X64

keyboards/handwired/split65/promicro/promicro.c

@@ -0,0 +1,16 @@
+/* Copyright 2020-2021 PercyJW-2 <joris.wachsmuth@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "promicro.h"

keyboards/handwired/split65/promicro/promicro.h

@@ -0,0 +1,38 @@
+/* Copyright 2020-2021 PercyJW-2 <joris.wachsmuth@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once 
+
+#include "split65.h"
+
+#define LAYOUT( \
+    L00, L01, L02, L03, L04, L05, L06, R07, R06, R05, R04, R03, R02, R01, R00, \
+    L10, L11, L12, L13, L14, L15,      R17, R16, R15, R14, R13, R12, R11, R10, \
+    L20, L21, L22, L23, L24, L25,      R47, R27, R26, R25, R24, R23, R22, R21, R20, \
+    L30, L31, L32, L33, L34, L35, L36, R37, R36, R35, R34, R33, R32, R31, R30, \
+    L40, L41, L42,      L43,                R46, R45, R44, R43, R42, R41, R40 \
+    ) \
+    { \
+        {L00, L01, L02, L03,   L04, L05,   L06,   KC_NO}, \
+        {L10, L11, L12, L13,   L14, L15,   KC_NO, KC_NO}, \
+        {L20, L21, L22, L23,   L24, L25,   KC_NO, KC_NO}, \
+        {L30, L31, L32, L33,   L34, L35,   L36,   KC_NO}, \
+        {L40, L41, L42, KC_NO, L43, KC_NO, KC_NO, KC_NO}, \
+        {R00, R01, R02, R03, R04, R05, R06, R07}, \
+        {R10, R11, R12, R13, R14, R15, R16, R17}, \
+        {R20, R21, R22, R23, R24, R25, R26, R27}, \
+        {R30, R31, R32, R33, R34, R35, R36, R37}, \
+        {R40, R41, R42, R43, R44, R45, R46, R47} \
+    }

keyboards/handwired/split65/promicro/rules.mk

@@ -0,0 +1,23 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = no        # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+OLED_ENABLE = yes
+SPLIT_KEYBOARD = yes

keyboards/handwired/split65/readme.md

@@ -0,0 +1,25 @@
+# Split65
+
+An split 65% keyboard with two OLEDs
+
+* Keyboard Maintainer: [Percy-JW2](https://github.com/PercyJW-2)
+* Hardware Supported: ProMicro and compatibles, Proton C
+* Hardware Availability: [Repository](https://github.com/PercyJW-2/Split65)
+
+Make example for this keyboard with an ProMicro:
+
+    make handwired/split65/promicro:default
+    
+Make example for this keyboard with an Proton C:
+
+    make handwired/split65/stm32:default
+    
+Example for flashing this keyboard with an ProMicro
+
+    make handwired/split65/promicro:default:flash
+
+Example for flashing this keyboard with an Proton C
+
+    make handwired/split65/stm32:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/handwired/split65/split65.c

@@ -0,0 +1,130 @@
+/* Copyright 2020-2021 PercyJW-2 <joris.wachsmuth@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "split65.h"
+
+// OLED Code inspired by https://github.com/qmk/qmk_firmware/blob/master/keyboards/splitkb/kyria/rev1/rev1.c
+
+#ifdef OLED_ENABLE
+__attribute__((weak)) oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+	return OLED_ROTATION_180;
+}
+
+__attribute__((weak)) void oled_task_user(void) {
+    if (is_keyboard_master()) {
+        static const char PROGMEM qmk_logo[] = {
+            0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94,
+            0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4,
+            0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,0};
+
+        oled_write_P(qmk_logo, false);
+
+        oled_write_P(PSTR("Split65\n\n"), false);
+
+        // Host Keyboard Layer Status
+        oled_write_P(PSTR("Layer: "), false);
+        switch (get_highest_layer(layer_state)) {
+            case 0:
+                oled_write_P(PSTR("Default\n"), false);
+                break;
+            case 1:
+                oled_write_P(PSTR("Lower\n"), false);
+                break;
+            case 2:
+                oled_write_P(PSTR("Raise\n"), false);
+                break;
+            case 3:
+                oled_write_P(PSTR("Adjust\n"), false);
+                break;
+            default:
+                oled_write_P(PSTR("Undefined\n"), false);
+        }
+
+        // Host Keyboard LED Status
+        led_t led_state = host_keyboard_led_state();
+        oled_write_P(led_state.num_lock ? PSTR("NUMLCK ") : PSTR("       "), false);
+        oled_write_P(led_state.caps_lock ? PSTR("CAPLCK ") : PSTR("       "), false);
+        oled_write_P(led_state.scroll_lock ? PSTR("SCRLCK ") : PSTR("       "), false);
+    } else {
+        static const char PROGMEM split65_logo[] = {
+            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80,
+            0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80, 0x80,
+            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xfe, 0xff, 0xff, 0xef, 0xc7, 0xc7, 0x87,
+            0x87, 0x87, 0x87, 0x07, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0x07,
+            0x07, 0x07, 0x07, 0x07, 0xdf, 0xff, 0xfe, 0xfe, 0xfc, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0x00, 0x00, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0xff, 0xff, 0xff, 0xff, 0xff, 0x07, 0x07,
+            0x07, 0x07, 0x07, 0x07, 0x00, 0x00, 0xf0, 0xfc, 0xfe, 0xfe, 0x9f, 0xcf, 0xc7, 0xc7, 0xc3, 0xc3,
+            0xc7, 0x87, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xef, 0xc7, 0xc7, 0xc7, 0xc7,
+            0xc7, 0xc7, 0x87, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0xc1, 0x81, 0x81,
+            0x81, 0x01, 0x05, 0x0d, 0x0d, 0x0c, 0x9c, 0xfc, 0xfc, 0xfc, 0xf9, 0x01, 0x01, 0x01, 0x01, 0x01,
+            0xf9, 0xf9, 0xf9, 0xf9, 0x19, 0x19, 0x19, 0x19, 0x1d, 0x0c, 0x0c, 0x0c, 0x01, 0x01, 0x01, 0x01,
+            0x01, 0xf8, 0xfc, 0xfc, 0xfc, 0xfc, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x81, 0x81, 0x01, 0x01,
+            0x01, 0xf8, 0xfc, 0xfc, 0xfc, 0xfc, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0xf8, 0xfc,
+            0xfc, 0xfc, 0xfc, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x7d, 0xfd, 0xfd, 0xf9, 0xfd,
+            0x01, 0x01, 0x01, 0x00, 0x88, 0xfc, 0xfc, 0xfc, 0xf9, 0x01, 0x01, 0x01, 0x81, 0x81, 0x81, 0x01,
+            0x01, 0x01, 0x01, 0x01, 0x80, 0xfc, 0xfc, 0xfc, 0xfc, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x03, 0x07,
+            0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x03, 0x03, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
+            0x07, 0x07, 0x07, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+            0x00, 0x03, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x00, 0x00,
+            0x00, 0x03, 0x07, 0x07, 0x07, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x07,
+            0x07, 0x07, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x03, 0x03, 0x07,
+            0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x03, 0x01, 0x00, 0x00, 0x00, 0x00, 0x03, 0x07, 0x07, 0x07,
+            0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x03, 0x03, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+        };
+        oled_write_raw_P(split65_logo, sizeof(split65_logo));
+    }
+}
+#endif

keyboards/handwired/split65/split65.h

@@ -0,0 +1,24 @@
+/* Copyright 2020-2021 PercyJW-2 <joris.wachsmuth@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#if defined(KEYBOARD_handwired_split65_stm32)
+    #include "stm32.h"
+#elif defined(KEYBOARD_handwired_split65_promicro)
+    #include "promicro.h"
+#endif

keyboards/handwired/split65/stm32/config.h

@@ -0,0 +1,60 @@
+/* Copyright 2020-2021 PercyJW-2 <joris.wachsmuth@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "config_common.h"
+
+// USB Device descriptor parameter
+#define VENDOR_ID     0x4A57 // JW
+#define PRODUCT_ID    0x0000 // first keeb
+#define DEVICE_VER    0x0000 // first revision
+#define MANUFACTURER  percyjw
+#define PRODUCT       split65
+
+// Audio
+#define AUDIO_PIN A5
+#define AUDIO_PIN_ALT A4
+#define AUDIO_PIN_ALT_AS_NEGATIVE
+
+// Matrix Assignments
+#define MATRIX_ROWS 10 //Rows are doubled-up
+#define MATRIX_COLS 8
+
+#define MATRIX_COL_PINS {A2, A1, A0, B8, B13, B14, B15, B9}
+#define MATRIX_ROW_PINS {B5, B4, B3, B2, B1}
+
+// COL2ROW, ROW2COL
+#define DIODE_DIRECTION COL2ROW
+
+#define MATRIX_IO_DELAY 5
+
+// Split Keyboard specifics
+#define SOFT_SERIAL_PIN A9
+#define SELECT_SOFT_SERIAL_SPEED 1
+#define SERIAL_USART_DRIVER SD1
+#define SERIAL_USART_TX_PAL_MODE 7
+#define SERIAL_USART_TIMEOUT 100
+
+// Debounce to reduce unintended double-presses use 0 if not needed
+#define DEBOUNCE 5
+
+// Feature diable options
+//#define NO_DEBUG
+//#define NO_PRINT
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+#define OLED_DISPLAY_128X64

keyboards/handwired/split65/stm32/halconf.h

@@ -0,0 +1,21 @@
+/* Copyright 2020 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define HAL_USE_SERIAL TRUE
+
+#include_next <halconf.h>

keyboards/handwired/split65/stm32/rules.mk

@@ -0,0 +1,25 @@
+# MCU name
+MCU = STM32F303
+BOARD = QMK_PROTON_C
+
+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = no        # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = yes          # Audio output
+OLED_ENABLE = yes
+SPLIT_KEYBOARD = yes
+SERIAL_DRIVER = usart

keyboards/handwired/split65/stm32/stm32.c

@@ -0,0 +1,16 @@
+/* Copyright 2020-2021 PercyJW-2 <joris.wachsmuth@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "stm32.h"

keyboards/handwired/split65/stm32/stm32.h

@@ -0,0 +1,38 @@
+/* Copyright 2020-2021 PercyJW-2 <joris.wachsmuth@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "split65.h"
+
+#define LAYOUT( \
+    L00, L01, L02, L03, L04, L05, L06, R07, R06, R05, R04, R03, R02, R01, R00, \
+    L10, L11, L12, L13, L14, L15,      R17, R16, R15, R14, R13, R12, R11, R10, \
+    L20, L21, L22, L23, L24, L25,      R47, R27, R26, R25, R24, R23, R22, R21, R20, \
+    L30, L31, L32, L33, L34, L35, L36, R37, R36, R35, R34, R33, R32, R31, R30, \
+    L40, L41, L42,      L43,                R46, R45, R44, R43, R42, R41, R40 \
+    ) \
+    { \
+        {L00, L01, L02, L03,   L04, L05,   L06,   KC_NO}, \
+        {L10, L11, L12, L13,   L14, L15,   KC_NO, KC_NO}, \
+        {L20, L21, L22, L23,   L24, L25,   KC_NO, KC_NO}, \
+        {L30, L31, L32, L33,   L34, L35,   L36,   KC_NO}, \
+        {L40, L41, L42, KC_NO, L43, KC_NO, KC_NO, KC_NO}, \
+        {R00, R01, R02, R03, R04, R05, R06, R07}, \
+        {R10, R11, R12, R13, R14, R15, R16, R17}, \
+        {R20, R21, R22, R23, R24, R25, R26, R27}, \
+        {R30, R31, R32, R33, R34, R35, R36, R37}, \
+        {R40, R41, R42, R43, R44, R45, R46, R47} \
+    }

keyboards/handwired/tractyl_manuform/5x6_right/5x6_right.h

@@ -17,13 +17,17 @@
 #pragma once
 
 #include "tractyl_manuform.h"
+
 #if defined(KEYBOARD_handwired_tractyl_manuform_5x6_right_f411)
 #    include "f411.h"
 #elif defined(KEYBOARD_handwired_tractyl_manuform_5x6_right_f303)
 #    include "f303.h"
 #elif defined(KEYBOARD_handwired_tractyl_manuform_5x6_right_teensy2pp)
 #    include "teensy2pp.h"
+#elif defined(KEYBOARD_handwired_tractyl_manuform_5x6_right_elite_c)
+#    include "elite_c.h"
 #endif
+
 #include "quantum.h"
 
 #define ___ KC_NO

keyboards/handwired/tractyl_manuform/5x6_right/config.h

@@ -50,3 +50,5 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_ONESHOT
 #define NO_ACTION_MACRO
 #define NO_ACTION_FUNCTION
+
+#define OLED_DISPLAY_128X64

keyboards/handwired/tractyl_manuform/5x6_right/elite_c/config.h

@@ -0,0 +1,52 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#define PRODUCT Tractyl Manuform(5x6) Elite C
+
+// wiring of each half
+#define MATRIX_COL_PINS \
+    { D4, D7, E6, B4, B5, B7 }
+#define MATRIX_ROW_PINS \
+    { F7, F6, F5, F4, F1, F0 }
+
+#define DIODE_DIRECTION COL2ROW
+
+// WS2812 RGB LED strip input and number of LEDs
+#define RGB_DI_PIN      D3
+#define RGBLED_NUM      20
+#define RGBLIGHT_SPLIT
+#define RGBLED_SPLIT \
+    { 10, 10 }
+#define RGBLIGHT_LIMIT_VAL 80
+#define OLED_BRIGHTNESS    50
+
+#define AUDIO_PIN       C6
+
+/* serial.c configuration for split keyboard */
+#define SOFT_SERIAL_PIN D2
+#define EE_HANDS
+
+#define ENCODERS_PAD_A \
+    { D5 }
+#define ENCODERS_PAD_B \
+    { C7 }
+
+/* PMW3360 Settings */
+#define PMW3360_CS_PIN B6

keyboards/handwired/tractyl_manuform/5x6_right/elite_c/elite_c.h

@@ -0,0 +1,19 @@
+/* Copyright 2020 Christopher Courtney, aka Drashna Jael're  (@drashna) <drashna@live.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "5x6_right.h"

keyboards/handwired/tractyl_manuform/5x6_right/elite_c/rules.mk

@@ -0,0 +1,11 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+LTO_ENABLE := yes
+RGBLIGHT_ENABLE = no
+OLED_ENABLE = no
+AUDIO_ENABLE = no
+ENCODER_ENABLE = no

keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h

@@ -39,6 +39,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define WS2812_PWM_DRIVER   PWMD2  // default: PWMD2
 #define WS2812_PWM_CHANNEL  2      // default: 2
 #define WS2812_PWM_PAL_MODE 1      // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
+#define WS2812_EXTERNAL_PULLUP
 //#define WS2812_PWM_COMPLEMENTARY_OUTPUT // Define for a complementary timer output (TIMx_CHyN); omit for a normal timer output (TIMx_CHy).
 #define WS2812_DMA_STREAM   STM32_DMA1_STREAM7  // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
 #define WS2812_DMA_CHANNEL  3                   // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
@@ -47,7 +48,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_SPLIT
 #define RGBLED_SPLIT \
     { 10, 10 }
-#define RGBLIGHT_LIMIT_VAL 80
+#define RGBLIGHT_LMIT_VAL 80
 
 #define DEBUG_LED_PIN      C13
 

keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md

@@ -9,7 +9,8 @@
 * 8KB SPI EEPROM chip sharing PA5-PA7 on SPI1 with PA4 as CS pin
 * Encoder using PA13 and PA14
 * SSD1306 OLED display (128x64) using PB8-PB9 on I2C1
-* Pull-up resistor (22k) on A10 to fix reset issue.
+* Pull-up resistor (22k) on PA10 to fix reset issue.
+* Pull-up resistor (5.1k) on PA1 for WS2812 LED support, and wire it's VCC to the 5V pin.
 
 * Keyboard Maintainer: [Drashna Jael're](https://github.com/drashna)
 * Hardware Supported: [Design files](https://gitlab.com/keyboards1/dm_r_track/-/tree/master/boolean), [WeAct BlackPill (F411)](https://github.com/WeActTC/MiniSTM32F4x1), [PMW3360 Optical Sensor](https://www.tindie.com/products/jkicklighter/pmw3360-motion-sensor/)

keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/config.h

@@ -24,13 +24,8 @@
 
 #define TRACKBALL_DPI_OPTIONS { 1200, 1800, 2600, 3400 }
 
-#define RGBLIGHT_MAX_BRIGHTNESS 60
-
 #undef DEBOUNCE
 #define DEBOUNCE 10
 
 #define SOLENOID_PIN F1
 #define SOLENOID_DEFAULT_DWELL 8
-
-#define OLED_DISPLAY_128X64
-#define OLED_BRIGHTNESS 50

keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c

@@ -117,7 +117,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     [_ADJUST] = LAYOUT_5x6_right_wrapper(
         KC_MAKE, ___________________BLANK___________________,                      _________________ADJUST_R1_________________, KC_RST,
         VRSN,    _________________ADJUST_L1_________________,                      _________________ADJUST_R1_________________, EEP_RST,
-        _______, _________________ADJUST_L2_________________,                      _________________ADJUST_R2_________________, TG_MODS,
+        KEYLOCK, _________________ADJUST_L2_________________,                      _________________ADJUST_R2_________________, TG_MODS,
         UC_MOD,  _________________ADJUST_L3_________________,                      _________________ADJUST_R3_________________, KC_MPLY,
                           HPT_DWLI, HPT_DWLD,                                                        TG_GAME, TG_DBLO,
                                             HPT_TOG, HPT_BUZ,                               KC_NUKE,
@@ -348,9 +348,16 @@ void render_kitty(void) {
                                                                 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x06, 0x04, 0x04, 0x04, 0x04, 0x05, 0x04, 0x04, 0x04, 0x07, 0x07, 0x07, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}};
 
     // assumes 1 frame prep stage
+#ifdef SWAP_HANDS_ENABLE
     extern bool swap_hands;
+#endif
     void        animation_phase(void) {
-        if (tap_toggling) {
+#    ifdef SWAP_HANDS_ENABLE
+        if (swap_hands)
+#else
+        if (tap_toggling)
+#endif
+        {
             anim_frame_duration = 300;
             current_rtogi_frame = (current_rtogi_frame + 1) % RTOGI_FRAMES;
             oled_write_raw_P(rtogi[abs((RTOGI_FRAMES - 1) - current_rtogi_frame)], ANIM_SIZE);

keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/config.h

@@ -35,6 +35,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLED_SPLIT \
     { 10, 10 }
 #define RGBLIGHT_LIMIT_VAL 80
+#define OLED_BRIGHTNESS    50
 
 #define DEBUG_LED_PIN   D6
 

keyboards/horizon/keymaps/default/keymap.c

@@ -34,14 +34,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     ),
     [_SYMBOL] = LAYOUT(
         KC_TILD, KC_1   , KC_2   , KC_3   , KC_4   , KC_5   ,                   KC_6   , KC_7   , KC_8   , KC_9   , KC_0   , KC_UNDS,
-        KC_PLUS, KC_EXLM, KC_LPRN, KC_RPRN, KC_DLR , KC_AMPR,                   KC_PIPE, KC_EQL , KC_LCBR, KC_RCBR, KC_COLN, KC_DQUO,
-        _______, KC_AT  , KC_LBRC, KC_RBRC, KC_HASH, KC_PERC, _______, _______, KC_CIRC, KC_ASTR, KC_LABK, KC_RABK, KC_QUES, _______,
+        KC_PLUS, KC_EXLM, KC_LPRN, KC_RPRN, KC_DLR , KC_AMPR,                   KC_PIPE, KC_HASH, KC_LCBR, KC_RCBR, KC_COLN, KC_DQUO,
+        _______, KC_AT  , KC_LBRC, KC_RBRC, KC_BSLS, KC_PERC, _______, _______, KC_CIRC, KC_ASTR, KC_LABK, KC_RABK, KC_QUES, _______,
         _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
     ),
     [_FUNCTION] = LAYOUT(
         _______, KC_F1  , KC_F2  , KC_F3  , KC_F4  , KC_PSCR,                   KC_SLCK, KC_HOME, KC_PGDN, KC_PGUP, KC_END , _______,
         _______, KC_F5  , KC_F6  , KC_F7  , KC_F8  , KC_INS ,                   KC_CLCK, KC_LEFT, KC_DOWN, KC_UP  , KC_RGHT, _______,
-        _______, KC_F9  , KC_F10 , KC_F11 , KC_F12 , _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, EEP_RST, _______,
+        _______, KC_F9  , KC_F10 , KC_F11 , KC_F12 , _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, KC_PAUS, _______,
         _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
     )
 };

keyboards/kabedon/kabedon98e/info.json

@@ -1,112 +1,117 @@
 {
-    "keyboard_name": "KabeDon98E", 
-    "url": "", 
-    "maintainer": "370490639", 
+    "keyboard_name": "KabeDon98E",
+    "url": "",
+    "maintainer": "370490639",
     "layouts": {
         "LAYOUT": {
             "layout": [
-			{"label":"Esc", "x":0, "y":0},
-			{"label":"F1", "x":1.5, "y":0},
-			{"label":"F2", "x":2.5, "y":0},
-			{"label":"F3", "x":3.5, "y":0},
-			{"label":"F4", "x":4.5, "y":0},
-			{"label":"F5", "x":6.25, "y":0},
-			{"label":"F6", "x":7.25, "y":0},
-			{"label":"F7", "x":8.25, "y":0},
-			{"label":"F8", "x":9.25, "y":0},
-			{"label":"F9", "x":11, "y":0},
-			{"label":"F10", "x":12, "y":0},
-			{"label":"F11", "x":13, "y":0},
-			{"label":"F12", "x":14, "y":0},
-			{"label":"Delete", "x":15.5, "y":0},
-			{"label":"Insert", "x":17, "y":0},
-			{"label":"Mute", "x":18.5, "y":0},			
-			{"label":"~", "x":0, "y":1.5},
-			{"label":"!", "x":1, "y":1.5},
-			{"label":"@", "x":2, "y":1.5},
-			{"label":"#", "x":3, "y":1.5},
-			{"label":"$", "x":4, "y":1.5},
-			{"label":"%", "x":5, "y":1.5},
-			{"label":"^", "x":6, "y":1.5},
-			{"label":"&", "x":7, "y":1.5},
-			{"label":"*", "x":8, "y":1.5},
-			{"label":"(", "x":9, "y":1.5},
-			{"label":")", "x":10, "y":1.5},
-			{"label":"_", "x":11, "y":1.5},
-			{"label":"+", "x":12, "y":1.5},
-			{"label":"Backspace", "x":13, "y":1.5, "w":2},
-			{"label":"Num Lock", "x":15.4, "y":1.5},
-			{"label":"/", "x":16.4, "y":1.5},
-			{"label":"*", "x":17.4, "y":1.5},
-			{"label":"-", "x":18.4, "y":1.5},			
-			{"label":"Home", "x":19.8, "y":1.5},			
-			{"label":"Tab", "x":0, "y":2.5, "w":1.5},
-			{"label":"Q", "x":1.5, "y":2.5},
-			{"label":"W", "x":2.5, "y":2.5},
-			{"label":"E", "x":3.5, "y":2.5},
-			{"label":"R", "x":4.5, "y":2.5},
-			{"label":"T", "x":5.5, "y":2.5},
-			{"label":"Y", "x":6.5, "y":2.5},
-			{"label":"U", "x":7.5, "y":2.5},
-			{"label":"I", "x":8.5, "y":2.5},
-			{"label":"O", "x":9.5, "y":2.5},
-			{"label":"P", "x":10.5, "y":2.5},
-			{"label":"{", "x":11.5, "y":2.5},
-			{"label":"}", "x":12.5, "y":2.5},
-			{"label":"|", "x":13.5, "y":2.5, "w":1.5},
-			{"label":"7", "x":15.4, "y":2.5},
-			{"label":"8", "x":16.4, "y":2.5},
-			{"label":"9", "x":17.4, "y":2.5},
-			{"label":"+", "x":18.4, "y":2.5, "h":2},			
-			{"label":"End", "x":19.8, "y":2.5},			
-			{"label":"Caps Lock", "x":0, "y":3.5, "w":1.75},
-			{"label":"A", "x":1.75, "y":3.5},
-			{"label":"S", "x":2.75, "y":3.5},
-			{"label":"D", "x":3.75, "y":3.5},
-			{"label":"F", "x":4.75, "y":3.5},
-			{"label":"G", "x":5.75, "y":3.5},
-			{"label":"H", "x":6.75, "y":3.5},
-			{"label":"J", "x":7.75, "y":3.5},
-			{"label":"K", "x":8.75, "y":3.5},
-			{"label":"L", "x":9.75, "y":3.5},
-			{"label":":", "x":10.75, "y":3.5},
-			{"label":"\"", "x":11.75, "y":3.5},
-			{"label":"Enter", "x":12.75, "y":3.5, "w":2.25},
-			{"label":"4", "x":15.4, "y":3.5},
-			{"label":"5", "x":16.4, "y":3.5},
-			{"label":"6", "x":17.4, "y":3.5},						
-			{"label":"Shift", "x":0, "y":4.5, "w":2.25},
-			{"label":"Z", "x":2.25, "y":4.5},
-			{"label":"X", "x":3.25, "y":4.5},
-			{"label":"C", "x":4.25, "y":4.5},
-			{"label":"V", "x":5.25, "y":4.5},
-			{"label":"B", "x":6.25, "y":4.5},
-			{"label":"N", "x":7.25, "y":4.5},
-			{"label":"M", "x":8.25, "y":4.5},
-			{"label":"<", "x":9.25, "y":4.5},
-			{"label":">", "x":10.25, "y":4.5},
-			{"label":"?", "x":11.25, "y":4.5},
-			{"label":"Shift", "x":12.25, "y":4.5, "w":1.75},
-			{"label":"Up", "x":14.2, "y":4.7},
-			{"label":"1", "x":15.4, "y":4.5},
-			{"label":"2", "x":16.4, "y":4.5},
-			{"label":"3", "x":17.4, "y":4.5},
-			{"label":"Enter", "x":18.4, "y":4.5, "h":2},						
-			{"label":"Pgup", "x":19.8, "y":4.5},						
-			{"label":"Ctrl", "x":0, "y":5.5, "w":1.25},
-			{"label":"Win", "x":1.25, "y":5.5},
-			{"label":"Alt", "x":2.25, "y":5.5},
-			{"label":"MO(1)", "x":3.25, "y":5.5},
-			{"label":"Space", "x":4.25, "y":5.5, "w":6.25},
-			{"label":"Alt", "x":10.5, "y":5.5, "w":1.25},
-			{"label":"Ctrl", "x":11.75, "y":5.5, "w":1.25},
-			{"label":"Left", "x":13.2, "y":5.7},
-			{"label":"Down", "x":14.2, "y":5.7},
-			{"label":"Right", "x":15.2, "y":5.7},
-			{"label":"0", "x":16.4, "y":5.5},
-			{"label":".", "x":17.4, "y":5.5},
-			{"label":"Pgdn", "x":19.8, "y":5.5}
-			]
+                {"label":"Esc", "x":0, "y":0.5},
+                {"label":"F1", "x":1.667, "y":0.5},
+                {"label":"F2", "x":2.667, "y":0.5},
+                {"label":"F3", "x":3.667, "y":0.5},
+                {"label":"F4", "x":4.667, "y":0.5},
+                {"label":"F5", "x":6.333, "y":0.5},
+                {"label":"F6", "x":7.333, "y":0.5},
+                {"label":"F7", "x":8.333, "y":0.5},
+                {"label":"F8", "x":9.333, "y":0.5},
+                {"label":"F9", "x":11.0, "y":0.5},
+                {"label":"F10", "x":12.0, "y":0.5},
+                {"label":"F11", "x":13.0, "y":0.5},
+                {"label":"F12", "x":14.0, "y":0.5},
+                {"label":"Delete", "x":15.5, "y":0.5},
+                {"label":"Home", "x":16.9, "y":0, "w":0.6, "h":0.5},
+                {"label":"Insert", "x":17.0, "y":0.5},
+                {"label":"End", "x":17.5, "y":0, "w":0.6, "h":0.5},
+                {"label":"PgUp", "x":18.4, "y":0, "w":0.6, "h":0.5},
+                {"label":"Mute", "x":18.5, "y":0.5},
+                {"label":"PgDn", "x":19, "y":0, "w":0.6, "h":0.5},
+
+                {"label":"~", "x":0, "y":1.75},
+                {"label":"!", "x":1, "y":1.75},
+                {"label":"@", "x":2, "y":1.75},
+                {"label":"#", "x":3, "y":1.75},
+                {"label":"$", "x":4, "y":1.75},
+                {"label":"%", "x":5, "y":1.75},
+                {"label":"^", "x":6, "y":1.75},
+                {"label":"&", "x":7, "y":1.75},
+                {"label":"*", "x":8, "y":1.75},
+                {"label":"(", "x":9, "y":1.75},
+                {"label":")", "x":10, "y":1.75},
+                {"label":"_", "x":11, "y":1.75},
+                {"label":"+", "x":12, "y":1.75},
+                {"label":"Backspace", "x":13, "y":1.75, "w":2},
+                {"label":"Num Lock", "x":15.5, "y":1.75},
+                {"label":"/", "x":16.5, "y":1.75},
+                {"label":"*", "x":17.5, "y":1.75},
+                {"label":"-", "x":18.5, "y":1.75},
+
+                {"label":"Tab", "x":0, "y":2.75, "w":1.5},
+                {"label":"Q", "x":1.5, "y":2.75},
+                {"label":"W", "x":2.5, "y":2.75},
+                {"label":"E", "x":3.5, "y":2.75},
+                {"label":"R", "x":4.5, "y":2.75},
+                {"label":"T", "x":5.5, "y":2.75},
+                {"label":"Y", "x":6.5, "y":2.75},
+                {"label":"U", "x":7.5, "y":2.75},
+                {"label":"I", "x":8.5, "y":2.75},
+                {"label":"O", "x":9.5, "y":2.75},
+                {"label":"P", "x":10.5, "y":2.75},
+                {"label":"{", "x":11.5, "y":2.75},
+                {"label":"}", "x":12.5, "y":2.75},
+                {"label":"|", "x":13.5, "y":2.75, "w":1.5},
+                {"label":"7", "x":15.5, "y":2.75},
+                {"label":"8", "x":16.5, "y":2.75},
+                {"label":"9", "x":17.5, "y":2.75},
+
+                {"label":"Caps Lock", "x":0, "y":3.75, "w":1.75},
+                {"label":"A", "x":1.75, "y":3.75},
+                {"label":"S", "x":2.75, "y":3.75},
+                {"label":"D", "x":3.75, "y":3.75},
+                {"label":"F", "x":4.75, "y":3.75},
+                {"label":"G", "x":5.75, "y":3.75},
+                {"label":"H", "x":6.75, "y":3.75},
+                {"label":"J", "x":7.75, "y":3.75},
+                {"label":"K", "x":8.75, "y":3.75},
+                {"label":"L", "x":9.75, "y":3.75},
+                {"label":":", "x":10.75, "y":3.75},
+                {"label":"\"", "x":11.75, "y":3.75},
+                {"label":"Enter", "x":12.75, "y":3.75, "w":2.25},
+                {"label":"4", "x":15.5, "y":3.75},
+                {"label":"5", "x":16.5, "y":3.75},
+                {"label":"6", "x":17.5, "y":3.75},
+                {"label":"+", "x":18.5, "y":2.75, "h":2},
+
+                {"label":"Shift", "x":0, "y":4.75, "w":2.25},
+                {"label":"Z", "x":2.25, "y":4.75},
+                {"label":"X", "x":3.25, "y":4.75},
+                {"label":"C", "x":4.25, "y":4.75},
+                {"label":"V", "x":5.25, "y":4.75},
+                {"label":"B", "x":6.25, "y":4.75},
+                {"label":"N", "x":7.25, "y":4.75},
+                {"label":"M", "x":8.25, "y":4.75},
+                {"label":"<", "x":9.25, "y":4.75},
+                {"label":">", "x":10.25, "y":4.75},
+                {"label":"?", "x":11.25, "y":4.75},
+                {"label":"Shift", "x":12.25, "y":4.75, "w":1.75},
+                {"label":"\u2191", "x":14.25, "y":5},
+                {"label":"1", "x":15.5, "y":4.75},
+                {"label":"2", "x":16.5, "y":4.75},
+                {"label":"3", "x":17.5, "y":4.75},
+
+                {"label":"Ctrl", "x":0, "y":5.75, "w":1.25},
+                {"label":"Win", "x":1.25, "y":5.75},
+                {"label":"Alt", "x":2.25, "y":5.75},
+                {"label":"MO(1)", "x":3.25, "y":5.75},
+                {"label":"Space", "x":4.25, "y":5.75, "w":6.25},
+                {"label":"Alt", "x":10.5, "y":5.75, "w":1.25},
+                {"label":"Ctrl", "x":11.75, "y":5.75, "w":1.25},
+                {"label":"\u2190", "x":13.25, "y":6},
+                {"label":"\u2193", "x":14.25, "y":6},
+                {"label":"\u2192", "x":15.25, "y":6},
+                {"label":"0", "x":16.5, "y":5.75},
+                {"label":".", "x":17.5, "y":5.75},
+                {"label":"Enter", "x":18.5, "y":4.75, "h":2}
+            ]
         }
     }
 }

keyboards/kabedon/kabedon98e/kabedon98e.c

@@ -14,3 +14,42 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "kabedon98e.h"
+
+static uint8_t encoder_state[ENCODERS] = {0};
+static keypos_t encoder_cw[ENCODERS] = ENCODERS_CW_KEY;
+static keypos_t encoder_ccw[ENCODERS] = ENCODERS_CCW_KEY;
+
+void encoder_action_unregister(void) {
+    for (int index = 0; index < ENCODERS; ++index) {
+        if (encoder_state[index]) {
+            keyevent_t encoder_event = (keyevent_t) {
+                .key = encoder_state[index] >> 1 ? encoder_cw[index] : encoder_ccw[index],
+                .pressed = false,
+                .time = (timer_read() | 1)
+            };
+            encoder_state[index] = 0;
+            action_exec(encoder_event);
+        }
+    }
+}
+
+void encoder_action_register(uint8_t index, bool clockwise) {
+    keyevent_t encoder_event = (keyevent_t) {
+        .key = clockwise ? encoder_cw[index] : encoder_ccw[index],
+        .pressed = true,
+        .time = (timer_read() | 1)
+    };
+    encoder_state[index] = (clockwise ^ 1) | (clockwise << 1);
+    action_exec(encoder_event);
+}
+
+void matrix_scan_kb(void) {
+    encoder_action_unregister();
+    matrix_scan_user();
+}
+
+bool encoder_update_kb(uint8_t index, bool clockwise) {
+    if (!encoder_update_user(index, clockwise)) { return false; }
+    encoder_action_register(index, clockwise);
+    return true;
+};

keyboards/kabedon/kabedon98e/kabedon98e.h

@@ -17,26 +17,47 @@
 
 #include "quantum.h"
 
-#define XXXX KC_NO
+#define XXX KC_NO
+
+/*                                                                   ┌──┬──┐ ┌──┬──┐
+ *                                                                   │00│20│ │60│80│
+ *                                                                   └──┴──┘ └──┴──┘
+ *                                                                    \─en1┘ └en2─/
+ * ┌───┐   ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┐ ┌───┐ ┌───┐
+ * │10 │   │01 │11 │02 │12 │ │03 │13 │04 │14 │ │05 │15 │16 │17 │ │57 │ │48 │ │40 │
+ * └───┘   └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┘ └───┘ └───┘
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ ┌───┬───┬───┬───┐
+ * │30 │21 │31 │22 │32 │23 │33 │24 │34 │25 │35 │26 │36 │37     │ │39 │49 │4A │5A │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ ├───┼───┼───┼───┤
+ * │50   │41 │51 │42 │52 │43 │53 │44 │54 │45 │55 │46 │56 │47   │ │59 │69 │6A │   │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ ├───┼───┼───┤   │
+ * │70    │61 │71 │62 │72 │63 │73 │64 │74 │65 │75 │66 │77      │ │79 │89 │8A │7A │
+ * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┘ ├───┼───┼───┼───┤
+ * │90      │91 │82 │92 │83 │93 │84 │94 │85 │95 │86 │97    │┌───┐│99 │A9 │9A │   │
+ * ├────┬───┼───┼───┼───┴───┴───┴───┴───┴───┴┬──┴─┬─┴──┬───┘│88 │└───┼───┼───┤   │
+ * │B0  │A1 │B1 │B3 │B2                      │B5  │A7  │┌───┼───┼───┐│B9 │AA │BA │
+ * └────┴───┴───┴───┴────────────────────────┴────┴────┘│B7 │A8 │B8 │└───┴───┴───┘
+ *                                                      └───┴───┴───┘
+ */
 
 #define LAYOUT( \
-    KB00,   KA01, KB01, KA02, KB02,    KA03, KB03, KA04, KB04,    KA05, KB05, KB06, KB07,     KF07,    KE08,    KE00,        \
-    KD00, KC01, KD01, KC02, KD02, KC03, KD03, KC04, KD04, KC05, KD05, KC06, KD06,   KD07,     KD09, KE09, KE10, KF10,  KA00, \
-    KF00, KE01, KF01, KE02, KF02, KE03, KF03, KE04, KF04, KE05, KF05, KE06, KF06,   KE07,     KF09, KG09, KG10,        KC00, \
-    KH00, KG01, KH01, KG02, KH02, KG03, KH03, KG04, KH04, KG05, KH05, KG06,      KH07,        KH09, KI09, KI10, KH10,        \
-    KJ00, KJ01, KI02, KJ02, KI03, KJ03, KI04, KJ04, KI05, KJ05, KI06,       KJ07,     KI08,   KJ09, KK09, KJ10,        KG00, \
-    KL00, KK01, KL01, KL03,               KL02,                 KL05,   KK07,   KL07, KK08, KL08,   KL09, KK10, KL10,  KI00  \
+    K10,   K01, K11, K02, K12,    K03, K13, K04, K14,   K05, K15, K16, K17,      K57,  K00,K48,K20,  K60,K40,K80, \
+    K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K26, K36,   K37,      K39, K49, K4A, K5A, \
+    K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K46, K56,   K47,      K59, K69, K6A,      \
+    K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K66,      K77,        K79, K89, K8A, K7A, \
+    K90, K91, K82, K92, K83, K93, K84, K94, K85, K95, K86,      K97,      K88,   K99, KA9, K9A,      \
+    KB0, KA1, KB1, KB3,              KB2,             KB5,   KA7,    KB7, KA8, KB8,   KB9, KAA, KBA  \
 ) { \
-  { KA00,  KA01,  KA02,  KA03,  KA04,  KA05,  XXXX,  XXXX,  XXXX,  XXXX,  XXXX }, \
-  { KB00,  KB01,  KB02,  KB03,  KB04,  KB05,  KB06,  KB07,  XXXX,  XXXX,  XXXX }, \
-  { KC00,  KC01,  KC02,  KC03,  KC04,  KC05,  KC06,  XXXX,  XXXX,  XXXX,  XXXX }, \
-  { KD00,  KD01,  KD02,  KD03,  KD04,  KD05,  KD06,  KD07,  XXXX,  KD09,  XXXX }, \
-  { KE00,  KE01,  KE02,  KE03,  KE04,  KE05,  KE06,  KE07,  KE08,  KE09,  KE10 }, \
-  { KF00,  KF01,  KF02,  KF03,  KF04,  KF05,  KF06,  KF07,  XXXX,  KF09,  KF10 }, \
-  { KG00,  KG01,  KG02,  KG03,  KG04,  KG05,  KG06,  XXXX,  XXXX,  KG09,  KG10 }, \
-  { KH00,  KH01,  KH02,  KH03,  KH04,  KH05,  XXXX,  KH07,  XXXX,  KH09,  KH10 }, \
-  { KI00,  XXXX,  KI02,  KI03,  KI04,  KI05,  KI06,  XXXX,  KI08,  KI09,  KI10 }, \
-  { KJ00,  KJ01,  KJ02,  KJ03,  KJ04,  KJ05,  XXXX,  KJ07,  XXXX,  KJ09,  KJ10 }, \
-  { XXXX,  KK01,  XXXX,  XXXX,  XXXX,  XXXX,  XXXX,  KK07,  KK08,  KK09,  KK10 }, \
-  { KL00,  KL01,  KL02,  KL03,  XXXX,  KL05,  XXXX,  KL07,  KL08,  KL09,  KL10 }  \
+  { K00,  K01,  K02,  K03,  K04,  K05,  XXX,  XXX,  XXX,  XXX,  XXX }, \
+  { K10,  K11,  K12,  K13,  K14,  K15,  K16,  K17,  XXX,  XXX,  XXX }, \
+  { K20,  K21,  K22,  K23,  K24,  K25,  K26,  XXX,  XXX,  XXX,  XXX }, \
+  { K30,  K31,  K32,  K33,  K34,  K35,  K36,  K37,  XXX,  K39,  XXX }, \
+  { K40,  K41,  K42,  K43,  K44,  K45,  K46,  K47,  K48,  K49,  K4A }, \
+  { K50,  K51,  K52,  K53,  K54,  K55,  K56,  K57,  XXX,  K59,  K5A }, \
+  { K60,  K61,  K62,  K63,  K64,  K65,  K66,  XXX,  XXX,  K69,  K6A }, \
+  { K70,  K71,  K72,  K73,  K74,  K75,  XXX,  K77,  XXX,  K79,  K7A }, \
+  { K80,  XXX,  K82,  K83,  K84,  K85,  K86,  XXX,  K88,  K89,  K8A }, \
+  { K90,  K91,  K92,  K93,  K94,  K95,  XXX,  K97,  XXX,  K99,  K9A }, \
+  { XXX,  KA1,  XXX,  XXX,  XXX,  XXX,  XXX,  KA7,  KA8,  KA9,  KAA }, \
+  { KB0,  KB1,  KB2,  KB3,  XXX,  KB5,  XXX,  KB7,  KB8,  KB9,  KBA }  \
 }

keyboards/kabedon/kabedon98e/keymaps/default/keymap.c

@@ -45,64 +45,27 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                                                      └──┘└──┘└──┘
  */
 [_BASE] = LAYOUT(
-	KC_ESC,      KC_F1,  KC_F2,  KC_F3,  KC_F4,       KC_F5,  KC_F6,  KC_F7,  KC_F8,       KC_F9,  KC_F10,  KC_F11,  KC_F12,      KC_DEL,      KC_INS, 		 KC_MUTE, 
-	KC_GRV,  KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,    KC_9,    KC_0,     KC_MINS,  KC_EQL,   KC_BSPC,     KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,   KC_HOME,
-	KC_TAB,  KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,    KC_O,    KC_P,     KC_LBRC,  KC_RBRC,  KC_BSLS,     KC_P7,   KC_P8,   KC_P9,              KC_END,
-	KC_CAPS, KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,    KC_L,    KC_SCLN,  KC_QUOT,       KC_ENT,           KC_P4,   KC_P5,   KC_P6,   KC_PPLS,  
-	KC_LSFT, KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH,        KC_RSFT,       KC_UP,      KC_P1,   KC_P2,   KC_P3,              KC_PGUP,
-	KC_LCTL, KC_LGUI, KC_LALT, MO(1),                KC_SPC,                         KC_RALT,    KC_RCTL,   KC_LEFT,  KC_DOWN,  KC_RGHT,   KC_P0,   KC_PDOT, KC_PENT,   KC_PGDN),
+    KC_ESC,     KC_F1,   KC_F2,   KC_F3,   KC_F4,      KC_F5,   KC_F6,   KC_F7,   KC_F8,      KC_F9,   KC_F10,  KC_F11,  KC_F12,           KC_DEL,  KC_HOME, KC_INS,  KC_END,  KC_PGUP, KC_MUTE, KC_PGDN,
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,          KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          KC_P7,   KC_P8,   KC_P9,
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,           KC_P4,   KC_P5,   KC_P6,   KC_PPLS,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT,     KC_UP,        KC_P1,   KC_P2,   KC_P3,
+    KC_LCTL, KC_LGUI, KC_LALT, MO(1),                     KC_SPC,                             KC_RALT, KC_RCTL,     KC_LEFT, KC_DOWN, KC_RGHT,      KC_P0,   KC_PDOT, KC_PENT),
 
 [_FN] = LAYOUT(
-	KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, 
-	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,   KC_TRNS,
-	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS,            KC_TRNS,
-	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,     KC_TRNS,         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,   
-	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,        KC_TRNS,     RGB_VAI,  KC_TRNS, KC_TRNS, KC_TRNS,            KC_TRNS, 
-	KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,                     KC_TRNS,                     RGB_TOG,  RGB_MOD,    RGB_HUI, RGB_VAD, RGB_HUD,  KC_TRNS, KC_TRNS, KC_TRNS,   KC_TRNS),
+    KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,     RGB_VAI,      KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,                            RGB_TOG, RGB_MOD,     RGB_HUI, RGB_VAD, RGB_HUD,      KC_TRNS, KC_TRNS, KC_TRNS),
 
 [_FN1] = LAYOUT(
-	KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, 
-	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,   KC_TRNS,
-	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS,            KC_TRNS,
-	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,     KC_TRNS,         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,   
-	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,        KC_TRNS,     KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS,            KC_TRNS,
-	KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,                     KC_TRNS,                     KC_TRNS,  KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS,   KC_TRNS)
-	
-};
-
-static uint8_t encoder_state[ENCODERS] = {0};
-static keypos_t encoder_cw[ENCODERS] = ENCODERS_CW_KEY;
-static keypos_t encoder_ccw[ENCODERS] = ENCODERS_CCW_KEY;
-
-void encoder_action_unregister(void) {
-    for (int index = 0; index < ENCODERS; ++index) {
-        if (encoder_state[index]) {
-            keyevent_t encoder_event = (keyevent_t) {
-                .key = encoder_state[index] >> 1 ? encoder_cw[index] : encoder_ccw[index],
-                .pressed = false,
-                .time = (timer_read() | 1)
-            };
-            encoder_state[index] = 0;
-            action_exec(encoder_event);
-        }
-    }
-}
-
-void encoder_action_register(uint8_t index, bool clockwise) {
-    keyevent_t encoder_event = (keyevent_t) {
-        .key = clockwise ? encoder_cw[index] : encoder_ccw[index],
-        .pressed = true,
-        .time = (timer_read() | 1)
-    };
-    encoder_state[index] = (clockwise ^ 1) | (clockwise << 1);
-    action_exec(encoder_event);
-}
-
-void matrix_scan_user(void) {
-    encoder_action_unregister();
-}
-
-bool encoder_update_user(uint8_t index, bool clockwise) {
-    encoder_action_register(index, clockwise);
-    return true;
+    KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,     KC_TRNS,      KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,                            KC_TRNS, KC_TRNS,     KC_TRNS, KC_TRNS, KC_TRNS,      KC_TRNS, KC_TRNS, KC_TRNS)
+
 };

keyboards/kabedon/kabedon98e/keymaps/via/keymap.c

@@ -45,64 +45,27 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                                                      └──┘└──┘└──┘
  */
 [_BASE] = LAYOUT(
-	KC_ESC,      KC_F1,  KC_F2,  KC_F3,  KC_F4,       KC_F5,  KC_F6,  KC_F7,  KC_F8,       KC_F9,  KC_F10,  KC_F11,  KC_F12,      KC_DEL,      KC_INS, 		 KC_MUTE, 
-	KC_GRV,  KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,    KC_9,    KC_0,     KC_MINS,  KC_EQL,   KC_BSPC,     KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,   KC_HOME,
-	KC_TAB,  KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,    KC_O,    KC_P,     KC_LBRC,  KC_RBRC,  KC_BSLS,     KC_P7,   KC_P8,   KC_P9,              KC_END,
-	KC_CAPS, KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,    KC_L,    KC_SCLN,  KC_QUOT,       KC_ENT,           KC_P4,   KC_P5,   KC_P6,   KC_PPLS,  
-	KC_LSFT, KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH,        KC_RSFT,       KC_UP,      KC_P1,   KC_P2,   KC_P3,              KC_PGUP,
-	KC_LCTL, KC_LGUI, KC_LALT, MO(1),                KC_SPC,                         KC_RALT,    KC_RCTL,   KC_LEFT,  KC_DOWN,  KC_RGHT,   KC_P0,   KC_PDOT, KC_PENT,   KC_PGDN),
+    KC_ESC,     KC_F1,   KC_F2,   KC_F3,   KC_F4,      KC_F5,   KC_F6,   KC_F7,   KC_F8,      KC_F9,   KC_F10,  KC_F11,  KC_F12,           KC_DEL,  KC_HOME, KC_INS,  KC_END,  KC_PGUP, KC_MUTE, KC_PGDN,
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,          KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          KC_P7,   KC_P8,   KC_P9,
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,           KC_P4,   KC_P5,   KC_P6,   KC_PPLS,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT,     KC_UP,        KC_P1,   KC_P2,   KC_P3,
+    KC_LCTL, KC_LGUI, KC_LALT, MO(1),                     KC_SPC,                             KC_RALT, KC_RCTL,     KC_LEFT, KC_DOWN, KC_RGHT,      KC_P0,   KC_PDOT, KC_PENT),
 
 [_FN] = LAYOUT(
-	KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, 
-	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,   KC_TRNS,
-	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS,            KC_TRNS,
-	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,     KC_TRNS,         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,   
-	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,        KC_TRNS,     RGB_VAI,  KC_TRNS, KC_TRNS, KC_TRNS,            KC_TRNS, 
-	KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,                     KC_TRNS,                     RGB_TOG,  RGB_MOD,    RGB_HUI, RGB_VAD, RGB_HUD,  KC_TRNS, KC_TRNS, KC_TRNS,   KC_TRNS),
+    KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,     RGB_VAI,      KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,                            RGB_TOG, RGB_MOD,     RGB_HUI, RGB_VAD, RGB_HUD,      KC_TRNS, KC_TRNS, KC_TRNS),
 
 [_FN1] = LAYOUT(
-	KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, 
-	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,   KC_TRNS,
-	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS,            KC_TRNS,
-	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,     KC_TRNS,         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,   
-	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,        KC_TRNS,     KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS,            KC_TRNS,
-	KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,                     KC_TRNS,                     KC_TRNS,  KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS,   KC_TRNS)
-	
-};
-
-static uint8_t encoder_state[ENCODERS] = {0};
-static keypos_t encoder_cw[ENCODERS] = ENCODERS_CW_KEY;
-static keypos_t encoder_ccw[ENCODERS] = ENCODERS_CCW_KEY;
-
-void encoder_action_unregister(void) {
-    for (int index = 0; index < ENCODERS; ++index) {
-        if (encoder_state[index]) {
-            keyevent_t encoder_event = (keyevent_t) {
-                .key = encoder_state[index] >> 1 ? encoder_cw[index] : encoder_ccw[index],
-                .pressed = false,
-                .time = (timer_read() | 1)
-            };
-            encoder_state[index] = 0;
-            action_exec(encoder_event);
-        }
-    }
-}
-
-void encoder_action_register(uint8_t index, bool clockwise) {
-    keyevent_t encoder_event = (keyevent_t) {
-        .key = clockwise ? encoder_cw[index] : encoder_ccw[index],
-        .pressed = true,
-        .time = (timer_read() | 1)
-    };
-    encoder_state[index] = (clockwise ^ 1) | (clockwise << 1);
-    action_exec(encoder_event);
-}
-
-void matrix_scan_user(void) {
-    encoder_action_unregister();
-}
-
-bool encoder_update_user(uint8_t index, bool clockwise) {
-    encoder_action_register(index, clockwise);
-    return true;
+    KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,     KC_TRNS,      KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,                            KC_TRNS, KC_TRNS,     KC_TRNS, KC_TRNS, KC_TRNS,      KC_TRNS, KC_TRNS, KC_TRNS)
+
 };

keyboards/kb_elmo/isolation/config.h

@@ -0,0 +1,62 @@
+/*
+Copyright 2021 kb-elmo<mail@elmo.space>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0xA68C
+#define PRODUCT_ID   0x4EE6
+#define DEVICE_VER   0x0001
+#define MANUFACTURER kb-elmo
+#define PRODUCT      ISOlation
+
+/* key matrix size */
+#define MATRIX_ROWS 1
+#define MATRIX_COLS 1
+
+/* direct key pin */
+#define DIRECT_PINS {{ B0 }}
+#define UNUSED_PINS
+
+/* RGB backlight */
+#define RGB_DI_PIN B2
+#ifdef RGB_DI_PIN
+#    define RGBLED_NUM 3
+#    define RGBLIGHT_HUE_STEP 8
+#    define RGBLIGHT_SAT_STEP 8
+#    define RGBLIGHT_VAL_STEP 8
+#    define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+#    define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+#    define RGBLIGHT_EFFECT_BREATHING
+#    define RGBLIGHT_EFFECT_RAINBOW_MOOD
+#    define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+#    define RGBLIGHT_EFFECT_KNIGHT
+#    define RGBLIGHT_EFFECT_CHRISTMAS
+#    define RGBLIGHT_EFFECT_STATIC_GRADIENT
+#    define RGBLIGHT_EFFECT_RGB_TEST
+#    define RGBLIGHT_EFFECT_ALTERNATING
+#    define RGBLIGHT_EFFECT_TWINKLE
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION

keyboards/kb_elmo/isolation/info.json

@@ -0,0 +1,12 @@
+{
+    "keyboard_name": "isolation",
+    "url": "",
+    "maintainer": "kb-elmo",
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"x":0.25, "y":0, "w":1.25, "h":2}
+            ]
+        }
+    }
+}

keyboards/kb_elmo/isolation/isolation.c

@@ -0,0 +1,17 @@
+/* Copyright 2021 kb-elmo<mail@elmo.space>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "isolation.h"

keyboards/kb_elmo/isolation/isolation.h

@@ -0,0 +1,25 @@
+/* Copyright 2021 kb-elmo<mail@elmo.space>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+    k00 \
+) { \
+    { k00 } \
+}

keyboards/kb_elmo/isolation/keymaps/default/keymap.c

@@ -0,0 +1,22 @@
+/* Copyright 2021 kb-elmo<mail@elmo.space>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_ENT
+    )
+};

keyboards/kb_elmo/isolation/readme.md

@@ -0,0 +1,24 @@
+# ISOlation
+
+![isolation](https://i.imgur.com/Pe1tWzJl.jpg)
+
+A seamless ISO single-key "macropad"
+
+* Keyboard Maintainer: [kb-elmo](https://github.com/kb-elmo)
+* Hardware Supported: ISOlation RGB PCB
+* Hardware Availability: [Open source project](https://github.com/kb-elmo/ISOlation)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make kb_elmo/isolation:default
+
+Flashing example for this keyboard:
+
+    make kb_elmo/isolation:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+* **Bootmagic reset**: Hold down the enter key and plug in the keyboard
+* **Bootloader pins**: Short the two pins labeled "BOOT" while plugging the board

keyboards/kb_elmo/isolation/rules.mk

@@ -0,0 +1,24 @@
+# MCU name
+MCU = atmega328p
+
+# Processor frequency
+F_CPU = 16000000
+
+# Bootloader selection
+BOOTLOADER = usbasploader
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output

keyboards/kb_elmo/qez/qez.h

@@ -53,5 +53,5 @@
     { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09 }, \
     { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19 }, \
     { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29 }, \
-    { ___, k31, k32, ___, ___, k35, ___, k37, k38, k39 }  \
+    { ___, k31, ___, ___, ___, k35, ___, ___, k38, k39 }  \
 }

keyboards/kb_elmo/sesame/readme.md

@@ -1,15 +1,24 @@
 # Sesame
 
-![sesame](https://i.imgur.com/IdudbWjl.jpg)
+![sesame](https://i.imgur.com/DNQMl8hl.jpg)
 
 Alice layout THT keyboard
 
 * Keyboard Maintainer: [kb-elmo](https://github.com/kb-elmo)
-* Hardware Supported: Sesame
-* Hardware Availability: [Project is open source](https://github.com/kb-elmo/sesame)
+* Hardware Supported: Sesame PCB rev.1 and rev.2
+* Hardware Availability: [Open source project](https://github.com/kb-elmo/sesame)
 
 Make example for this keyboard (after setting up your build environment):
 
     make kb_elmo/sesame:default
 
+Flashing example for this keyboard:
+
+    make kb_elmo/sesame:default:flash
+
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+* **Bootmagic reset**: Hold down the top left key and plug in the keyboard
+* **Physical reset button**: Hold down the button labeled "BOOT" and briefly press the button labeled "RESET" on the back of the PCB

keyboards/kb_elmo/twelvekey/readme.md

@@ -1,6 +1,6 @@
 # Twelvekey
 
-![twelvekey](https://i.imgur.com/xBQIvpml.png)
+![twelvekey](https://i.imgur.com/59sSO8kl.jpg)
 
 Simple 12-key macropad
 
@@ -17,3 +17,8 @@ Flashing example for this keyboard:
     make kb_elmo/twelvekey:default:flash
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+* **Bootmagic reset**: Hold down the top left key and plug in the keyboard
+* **Physical reset button**: Hold down the button labeled "BOOT" and briefly press the button labeled "RESET" on the back of the PCB

keyboards/kbdfans/kbd4x/readme.md

@@ -4,9 +4,9 @@
 
 A compact 40% (12x4) ortholinear keyboard kit sold by KBDFans.
 
-Keyboard Maintainer: ![sevenseacat](https://github.com/sevenseacat)  
-Hardware Supported: KBD4x PCB  
-Hardware Availability: https://kbdfans.cn/collections/diy-kit/products/kbd4x-custom-mechanical-keyboard-hot-swap-diy-kit
+* Keyboard Maintainer: ![sevenseacat](https://github.com/sevenseacat)
+* Hardware Supported: KBD4x PCB
+* Hardware Availability: https://kbdfans.cn/collections/diy-kit/products/kbd4x-custom-mechanical-keyboard-hot-swap-diy-kit
 
 Make example for this keyboard (after setting up your build environment):
 

keyboards/kbdfans/kbd66/readme.md

@@ -2,11 +2,11 @@
 
 ![KBD66](https://i.imgur.com/qtLuL2o.jpg)
 
-A 65% keyboard from KBDFans.
+A 66 key keyboard from KBDFans modeled after the FC660m.
 
-Keyboard Maintainer: [Alex](https://github.com/allo-world)  
-Hardware Supported: KBD66, ATmega32U4  
-Hardware Availability: [KBDFans](https://kbdfans.cn), [Massdrop](https://www.massdrop.com/buy/kbd66-mechanical-keyboard-kit?mode=guest_open)
+* Keyboard Maintainer: [Alex](https://github.com/allo-world)
+* Hardware Supported: KBD66, ATmega32U4
+* Hardware Availability: [KBDFans](https://kbdfans.cn), [Massdrop](https://www.massdrop.com/buy/kbd66-mechanical-keyboard-kit?mode=guest_open)
 
 Make example for this keyboard (after setting up your build environment):
 

keyboards/kbdfans/kbd67/hotswap/readme.md

@@ -2,9 +2,11 @@
 
 A 65% hot swap board with blocker and USB Type C port. 
 
-Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)  
-Hardware Supported: KBD67 Hotswap  
-Hardware Availability: [KBDFans](https://kbdfans.cn/products/coming-soon-kbd67-mechanical-keyboard-diy-kit)
+This PCB was replaced by the hotswap variants of the kbd67mkii
+
+* Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)
+* Hardware Supported: KBD67 Hotswap
+* Hardware Availability: [KBDFans](https://kbdfans.cn/products/coming-soon-kbd67-mechanical-keyboard-diy-kit)
 
 Make example for this keyboard (after setting up your build environment):
 

keyboards/kbdfans/kbd67/mkii_soldered/readme.md

@@ -2,8 +2,7 @@
 
 ![Render](https://i.imgur.com/W8jBycQ.png)
 
-A simple 65% keyboard
-This is for the solderable PCB for the MKII. For hotswap PCB firmware, please check the other directories.
+Solderable 65% PCB made originally for the KBD67mkii by ai03. For hotswap PCB firmware, please check the other directories.
 
 * Keyboard Maintainer: [ai03](https://github.com/ai03-2725) / [KBDfans](https://kbdfans.cn/)
 * Hardware Supported: KBD67 MKII Soldered PCB (Not hotswap)

keyboards/kbdfans/kbd67/mkiirgb/v1/readme.md

@@ -1,6 +1,8 @@
 # KBD67 Mk.II RGB V1 (Hotswap)
 
-A hotswap 65% keyboard with USB C and inswitch RGB.
+An hotswap 65% keyboard with USB C and inswitch RGB.
+
+This was released along with the kbd67mkii keyboard that featured a top mount design, and brass weight.
 
 * Keyboard Maintainer: [moyi4681](https://github.com/moyi4681)
 * Hardware Supported: KBD67 Mk.II RGB V1

keyboards/kbdfans/kbd67/mkiirgb/v2/readme.md

@@ -2,6 +2,10 @@
 
 A hotswap 65% keyboard with USB C, inswitch RGB, and ESD protection.
 
+Originally sold as a replacement PCB for the kbd67mkii when the V1 PCB failed.
+
+It has since been sold along with the D64 and KBD67 Lite R1/R2.
+
 * Keyboard Maintainer: [moyi4681](https://github.com/moyi4681)
 * Hardware Supported: KBD67 Mk.II RGB V2
 * Hardware Availability: [kbdfans](https://kbdfans.myshopify.com/)

keyboards/kbdfans/kbd67/mkiirgb/v3/readme.md

@@ -2,6 +2,12 @@
 
 A hotswap 65% keyboard with USB C, inswitch RGB, and ESD protection.
 
+Originally sold as a replacement to the V2 as it offered a much simpler firmware flashing experience for customers. This board expects `.bin` files.
+
+As of 10/2021 this board has no visible markings differentiating it from the previous V2.
+
+It has since been sold with the KBD67Lite R2, D64, and Blade 65.
+
 * Keyboard Maintainer: [moyi4681](https://github.com/moyi4681)
 * Hardware Supported: KBD67 Mk.II RGB V3
 * Hardware Availability: [kbdfans](https://kbdfans.myshopify.com/)

keyboards/kbdfans/kbd67/readme.md

@@ -1,19 +1,19 @@
 # KBD67
 
-A 65% keyboard sold in several variants. 
+A 65% keyboard sold in several variants supporting KBDFan's different 65% lineups each with their own different revisions.
 
-1. [Rev1](rev1/): Released in early 2018. Atmega32u4 soldered keyboard. Sold under the name "KBD65".  
-2. [HotSwap](hotswap/): Released in late 2018. Atmega32U4 hotswap single layout keyboard. 
+1. [Rev1](rev1/): Released in early 2018. Atmega32u4 soldered keyboard. Sold under the name "KBD65".
+2. [HotSwap](hotswap/): Released in late 2018. Atmega32U4 hotswap single layout keyboard.
 3. [Rev2](rev2/): Released in April/May 2019. Atmega32u4 soldered keyboard.
 4. [MKII](mkii_soldered/): Released in September 2019, designed by ai03. Atmega32u4 soldered keyboard. ESD Protected
-5. [MKII RGB V1](mkiirgb/v1/): Released in September 2019. Arm hotswap board. 
+5. [MKII RGB V1](mkiirgb/v1/): Released in September 2019. Arm hotswap board.
 6. [MKII RGB V2](mkiirgb/v2/): Released in December 2019. Atmega32u4 hotswap board. ESD Protected.
-
+6. [MKII RGB V2*](mkiirgb/v3/): Released in March 2021. Atmega32u4 hotswap board. ESD Protected. Uses LUFA bootloader and different inswitch RGB implementation. No visible markings differentiating it from the previous V2.
 
  **Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** Please use the `.hex` or `.bin` appropriate for your board.
 
 * Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin), [moyi4681](https://github.com/moyi4681)
-* Hardware Supported: KBD67 rev1, rev2, hotswap, mkii, mkiirgb v1, mkiirgb v2
+* Hardware Supported: KBD67 rev1, rev2, hotswap, mkii, mkiirgb v1, mkiirgb v2, etc.
 * Hardware Availability: KBDFans
 
 Make examples for this keyboard (after setting up your build environment):
@@ -21,8 +21,9 @@ Make examples for this keyboard (after setting up your build environment):
     make kbdfans/kbd67/rev1:default
     make kbdfans/kbd67/rev2:default
     make kbdfans/kbd67/hotswap:default
-    make kbdfans/kbd67/mkii_soldered:default 
-    make kbdfans/kbd67/mkiirgb/v1:default  
-    make kbdfans/kbd67/mkiirgb/v2:default  
+    make kbdfans/kbd67/mkii_soldered:default
+    make kbdfans/kbd67/mkiirgb/v1:default
+    make kbdfans/kbd67/mkiirgb/v2:default
+    make kbdfans/kbd67/mkiirgb/v3:default
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/kbdfans/kbd67/rev1/readme.md

@@ -1,10 +1,10 @@
 # KBD67 rev1
 
-65% keyboard with blocker.  
+65% keyboard with RGB underglow originally sold for the Tofu 65 and Tada 68 keyboards.
 
-Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)  
-Hardware Supported: KBD67 PCB (Sometimes sold under the name "KBD65")  
-Hardware Availability: KBDFans [Keyboard Kit](https://kbdfans.cn/products/coming-soon-kbd67-mechanical-keyboard-diy-kit), [PCB](https://kbdfans.cn/collections/65/products/kbd65-65-custom-mechanical-keyboard-pcb)
+* Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)
+* Hardware Supported: KBD67 PCB (Sometimes sold under the name "KBD65")
+* Hardware Availability: KBDFans [Keyboard Kit](https://kbdfans.cn/products/coming-soon-kbd67-mechanical-keyboard-diy-kit), [PCB](https://kbdfans.cn/collections/65/products/kbd65-65-custom-mechanical-keyboard-pcb)
 
 Make example for this keyboard (after setting up your build environment):
 

keyboards/kbdfans/kbd67/rev2/readme.md

@@ -1,10 +1,10 @@
 # KBD67 rev2
 
-65% pcb with blocker. Revision 2 (Manufactured after 05/01/19). 
+65% keyboard with RGB underglow originally sold for the Tofu 65 and Tada 68 keyboards.
 
-Keyboard Maintainer: [Vorror](https://github.com/vorror)  
-Hardware Supported: KBD67v2 PCB (Sometimes sold under the name "KBD65")  
-Hardware Availability: KBDFans [Keyboard Kit](https://kbdfans.cn/products/coming-soon-kbd67-mechanical-keyboard-diy-kit), [PCB](https://kbdfans.cn/collections/65/products/kbd65-65-custom-mechanical-keyboard-pcb)
+* Keyboard Maintainer: [Vorror](https://github.com/vorror)
+* Hardware Supported: KBD67v2 PCB (Sometimes sold under the name "KBD65")
+* Hardware Availability: KBDFans [Keyboard Kit](https://kbdfans.cn/products/coming-soon-kbd67-mechanical-keyboard-diy-kit), [PCB](https://kbdfans.cn/collections/65/products/kbd65-65-custom-mechanical-keyboard-pcb)
 
 Make example for this keyboard (after setting up your build environment):
 

keyboards/kbdfans/kbd6x/readme.md

@@ -2,9 +2,9 @@
 
 A WKL Hot Swap Double USB C 60%
 
-Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)  
-Hardware Supported: KBD6x PCB  
-Hardware Availability: [KBDFans](https://kbdfans.cn/products/kbd6x-wkl-hot-swap-60-double-type-c-pcb)  
+* Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)
+* Hardware Supported: KBD6x PCB
+* Hardware Availability: [KBDFans](https://kbdfans.cn/products/kbd6x-wkl-hot-swap-60-double-type-c-pcb)
 
 Make example for this keyboard (after setting up your build environment):
 

keyboards/kbdfans/kbd75/readme.md

@@ -1,11 +1,5 @@
 # KBD75
 
-Keyboard Maintainer: QMK Community  
-Hardware Supported: KBD75 PCB rev 1 and 2  
-Hardware Availability:
-* https://kbdfans.com/collections/75-diy-kit/products/kbd75-keyboard-set
-* https://kbdfans.com/collections/75-diy-kit/products/kbd75v2-custom-keyboard-diy-kit
-
 The KBD75 was sold through various rounds, with various PCB changes between them. 
 
 * **Round 1 (2017)**: Black PCB - Bootmapper Client, atmega32a MCU (Use [Winkeyless.kr B.mini](../../winkeyless/bmini/) firmware)
@@ -14,6 +8,14 @@ The KBD75 was sold through various rounds, with various PCB changes between them
 * **Round 6 (2019)**: White PCB with USB C - QMK Firmware, atmega32u4 MCU (Use KBD75 rev1 or rev2(with numpad support))
 * **V2 (2019-)**: Same as **Round 6** (above).
 
+**Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.**
+
+* Keyboard Maintainer: QMK Community
+* Hardware Supported: KBD75 PCB rev 1 and 2
+* Hardware Availability:
+    * https://kbdfans.com/collections/75-diy-kit/products/kbd75-keyboard-set
+    * https://kbdfans.com/collections/75-diy-kit/products/kbd75v2-custom-keyboard-diy-kit
+
 Make example for this keyboard (after setting up your build environment):
 
     make kbdfans/kbd75/rev1:default

keyboards/kbdfans/kbd8x/readme.md

@@ -1,12 +1,10 @@
 # KBD8X
 
-![kbd8x](imgur.com image replace me!)
-
 TKL Keyboard from KBDFans
 
-Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)    
-Hardware Supported: kbd8x   
-Hardware Availability: [KBDFans](https://kbdfans.cn/blogs/updates/kbd-8x-update-40)  
+* Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)
+* Hardware Supported: kbd8x
+* Hardware Availability: [KBDFans](https://kbdfans.cn/blogs/updates/kbd-8x-update-40)
 
 Make example for this keyboard (after setting up your build environment):
 

keyboards/kbdfans/kbd8x_mk2/readme.md

@@ -4,9 +4,9 @@
 
 A fairly typical TKL
 
-Keyboard Maintainer: [ai03](https://github.com/ai03-2725) / [KBDfans](https://kbdfans.cn/)  
-Hardware Supported: KBD8X MKII PCB/case
-Hardware Availability: [KBDfans](https://kbdfans.com/collections/90-kbd19x/products/gb-kbd8x-mkii-pcb)
+* Keyboard Maintainer: [ai03](https://github.com/ai03-2725) / [KBDfans](https://kbdfans.cn/)
+* Hardware Supported: KBD8X MKII PCB/case
+* Hardware Availability: [KBDfans](https://kbdfans.com/collections/90-kbd19x/products/gb-kbd8x-mkii-pcb)
 
 Make example for this keyboard (after setting up your build environment):
 

keyboards/kbdfans/kbdmini/readme.md

@@ -1,7 +1,5 @@
 # KBDMINI
 
-![KBDMINI](imgur.com image replace me!)
-
 * Keyboard Maintainer: [DZTECH](https://github.com/moyi4681)
 * Hardware Supported: KBDMINI
 * Hardware Availability: [KBDFans](https://kbdfans.cn/)

keyboards/kbnordic/nordic60/info.json

@@ -3,210 +3,359 @@
     "url": "kbnordic.se",
     "maintainer": "4pplet",
     "layouts": {
-
-        "LAYOUT_iso": {
-            "layout": [
-                { "label": "~", "x": 0, "y": 0 },
-                { "label": "!", "x": 1, "y": 0 },
-                { "label": "@", "x": 2, "y": 0 },
-                { "label": "#", "x": 3, "y": 0 },
-                { "label": "$", "x": 4, "y": 0 },
-                { "label": "%", "x": 5, "y": 0 },
-                { "label": "^", "x": 6, "y": 0 },
-                { "label": "&", "x": 7, "y": 0 },
-                { "label": "*", "x": 8, "y": 0 },
-                { "label": "(", "x": 9, "y": 0 },
-                { "label": ")", "x": 10, "y": 0 },
-                { "label": "_", "x": 11, "y": 0 },
-                { "label": "+", "x": 12, "y": 0 },
-                { "label": "Backspace", "w": 2, "x": 13, "y": 0 },
-                { "label": "Tab", "w": 1.5, "x": 0, "y": 1 },
-                { "label": "Q", "x": 1.5, "y": 1 },
-                { "label": "W", "x": 2.5, "y": 1 },
-                { "label": "E", "x": 3.5, "y": 1 },
-                { "label": "R", "x": 4.5, "y": 1 },
-                { "label": "T", "x": 5.5, "y": 1 },
-                { "label": "Y", "x": 6.5, "y": 1 },
-                { "label": "U", "x": 7.5, "y": 1 },
-                { "label": "I", "x": 8.5, "y": 1 },
-                { "label": "O", "x": 9.5, "y": 1 },
-                { "label": "P", "x": 10.5, "y": 1 },
-                { "label": "{", "x": 11.5, "y": 1 },
-                { "label": "}", "x": 12.5, "y": 1 },
-                { "h": 2, "label": "ISO", "w": 1.25, "x": 13.75, "y": 1 },
-                { "label": "Caps Lock", "w": 1.75, "x": 0, "y": 2 },
-                { "label": "A", "x": 1.75, "y": 2 },
-                { "label": "S", "x": 2.75, "y": 2 },
-                { "label": "D", "x": 3.75, "y": 2 },
-                { "label": "F", "x": 4.75, "y": 2 },
-                { "label": "G", "x": 5.75, "y": 2 },
-                { "label": "H", "x": 6.75, "y": 2 },
-                { "label": "J", "x": 7.75, "y": 2 },
-                { "label": "K", "x": 8.75, "y": 2 },
-                { "label": "L", "x": 9.75, "y": 2 },
-                { "label": ":", "x": 10.75, "y": 2 },
-                { "label": "\"", "x": 11.75, "y": 2 },
-                { "label": "ISO", "x": 12.75, "y": 2 },
-                { "label": "Shift", "w": 1.25, "x": 0, "y": 3 },
-                { "label": "ISO", "x": 1.25, "y": 3 },
-                { "label": "Z", "x": 2.25, "y": 3 },
-                { "label": "X", "x": 3.25, "y": 3 },
-                { "label": "C", "x": 4.25, "y": 3 },
-                { "label": "V", "x": 5.25, "y": 3 },
-                { "label": "B", "x": 6.25, "y": 3 },
-                { "label": "N", "x": 7.25, "y": 3 },
-                { "label": "M", "x": 8.25, "y": 3 },
-                { "label": "<", "x": 9.25, "y": 3 },
-                { "label": ">", "x": 10.25, "y": 3 },
-                { "label": "?", "x": 11.25, "y": 3 },
-                { "label": "Shift", "w": 1.75, "x": 12.25, "y": 3 },
-                { "label": "Fn", "x": 14, "y": 3 },
-                { "label": "Ctrl", "w": 1.25, "x": 0, "y": 4 },
-                { "label": "Win", "w": 1.25, "x": 1.25, "y": 4 },
-                { "label": "Alt", "w": 1.25, "x": 2.5, "y": 4 },
-                { "w": 6.25, "x": 3.75, "y": 4 },
-                { "label": "Alt", "w": 1.25, "x": 10, "y": 4 },
-                { "label": "Win", "w": 1.25, "x": 11.25, "y": 4 },
-                { "label": "Menu", "w": 1.25, "x": 12.5, "y": 4 },
-                { "label": "Ctrl", "w": 1.25, "x": 13.75, "y": 4 }
-            ]
-        },
-
-       "LAYOUT_ansi": {
-            "layout": [
-                { "label": "~", "x": 0, "y": 0 },
-                { "label": "!", "x": 1, "y": 0 },
-                { "label": "@", "x": 2, "y": 0 },
-                { "label": "#", "x": 3, "y": 0 },
-                { "label": "$", "x": 4, "y": 0 },
-                { "label": "%", "x": 5, "y": 0 },
-                { "label": "^", "x": 6, "y": 0 },
-                { "label": "&", "x": 7, "y": 0 },
-                { "label": "*", "x": 8, "y": 0 },
-                { "label": "(", "x": 9, "y": 0 },
-                { "label": ")", "x": 10, "y": 0 },
-                { "label": "_", "x": 11, "y": 0 },
-                { "label": "+", "x": 12, "y": 0 },
-                { "label": "Backspace", "w": 2, "x": 13, "y": 0 },
-                { "label": "Tab", "w": 1.5, "x": 0, "y": 1 },
-                { "label": "Q", "x": 1.5, "y": 1 },
-                { "label": "W", "x": 2.5, "y": 1 },
-                { "label": "E", "x": 3.5, "y": 1 },
-                { "label": "R", "x": 4.5, "y": 1 },
-                { "label": "T", "x": 5.5, "y": 1 },
-                { "label": "Y", "x": 6.5, "y": 1 },
-                { "label": "U", "x": 7.5, "y": 1 },
-                { "label": "I", "x": 8.5, "y": 1 },
-                { "label": "O", "x": 9.5, "y": 1 },
-                { "label": "P", "x": 10.5, "y": 1 },
-                { "label": "{", "x": 11.5, "y": 1 },
-                { "label": "}", "x": 12.5, "y": 1 },
-                { "label": "|", "w": 1.5, "x": 13.5, "y": 1 },
-                { "label": "Caps Lock", "w": 1.75, "x": 0, "y": 2 },
-                { "label": "A", "x": 1.75, "y": 2 },
-                { "label": "S", "x": 2.75, "y": 2 },
-                { "label": "D", "x": 3.75, "y": 2 },
-                { "label": "F", "x": 4.75, "y": 2 },
-                { "label": "G", "x": 5.75, "y": 2 },
-                { "label": "H", "x": 6.75, "y": 2 },
-                { "label": "J", "x": 7.75, "y": 2 },
-                { "label": "K", "x": 8.75, "y": 2 },
-                { "label": "L", "x": 9.75, "y": 2 },
-                { "label": ":", "x": 10.75, "y": 2 },
-                { "label": "\"", "x": 11.75, "y": 2 },
-                { "label": "Enter", "w": 2.25, "x": 12.75, "y": 2 },
-                { "label": "Shift", "w": 2.25, "x": 0, "y": 3 },
-                { "label": "Z", "x": 2.25, "y": 3 },
-                { "label": "X", "x": 3.25, "y": 3 },
-                { "label": "C", "x": 4.25, "y": 3 },
-                { "label": "V", "x": 5.25, "y": 3 },
-                { "label": "B", "x": 6.25, "y": 3 },
-                { "label": "N", "x": 7.25, "y": 3 },
-                { "label": "M", "x": 8.25, "y": 3 },
-                { "label": "<", "x": 9.25, "y": 3 },
-                { "label": ">", "x": 10.25, "y": 3 },
-                { "label": "?", "x": 11.25, "y": 3 },
-                { "label": "Shift", "w": 1.75, "x": 12.25, "y": 3 },
-                { "label": "Fn", "x": 14, "y": 3 },
-                { "label": "Ctrl", "w": 1.25, "x": 0, "y": 4 },
-                { "label": "Win", "w": 1.25, "x": 1.25, "y": 4 },
-                { "label": "Alt", "w": 1.25, "x": 2.5, "y": 4 },
-                { "w": 6.25, "x": 3.75, "y": 4 },
-                { "label": "Alt", "w": 1.25, "x": 10, "y": 4 },
-                { "label": "Win", "w": 1.25, "x": 11.25, "y": 4 },
-                { "label": "Menu", "w": 1.25, "x": 12.5, "y": 4 },
-                { "label": "Ctrl", "w": 1.25, "x": 13.75, "y": 4 }
-            ]
-        },
         "LAYOUT_all": {
             "layout": [
-                { "label": "~", "x": 0, "y": 0 },
-                { "label": "!", "x": 1, "y": 0 },
-                { "label": "@", "x": 2, "y": 0 },
-                { "label": "#", "x": 3, "y": 0 },
-                { "label": "$", "x": 4, "y": 0 },
-                { "label": "%", "x": 5, "y": 0 },
-                { "label": "^", "x": 6, "y": 0 },
-                { "label": "&", "x": 7, "y": 0 },
-                { "label": "*", "x": 8, "y": 0 },
-                { "label": "(", "x": 9, "y": 0 },
-                { "label": ")", "x": 10, "y": 0 },
-                { "label": "_", "x": 11, "y": 0 },
-                { "label": "+", "x": 12, "y": 0 },
-                { "x": 13, "y": 0 },
-                { "x": 14, "y": 0 },
-                { "label": "Tab", "w": 1.5, "x": 0, "y": 1 },
-                { "label": "Q", "x": 1.5, "y": 1 },
-                { "label": "W", "x": 2.5, "y": 1 },
-                { "label": "E", "x": 3.5, "y": 1 },
-                { "label": "R", "x": 4.5, "y": 1 },
-                { "label": "T", "x": 5.5, "y": 1 },
-                { "label": "Y", "x": 6.5, "y": 1 },
-                { "label": "U", "x": 7.5, "y": 1 },
-                { "label": "I", "x": 8.5, "y": 1 },
-                { "label": "O", "x": 9.5, "y": 1 },
-                { "label": "P", "x": 10.5, "y": 1 },
-                { "label": "{", "x": 11.5, "y": 1 },
-                { "label": "}", "x": 12.5, "y": 1 },
-                { "label": "|", "w": 1.5, "x": 13.5, "y": 1 },
-                { "label": "Caps Lock", "w": 1.75, "x": 0, "y": 2 },
-                { "label": "A", "x": 1.75, "y": 2 },
-                { "label": "S", "x": 2.75, "y": 2 },
-                { "label": "D", "x": 3.75, "y": 2 },
-                { "label": "F", "x": 4.75, "y": 2 },
-                { "label": "G", "x": 5.75, "y": 2 },
-                { "label": "H", "x": 6.75, "y": 2 },
-                { "label": "J", "x": 7.75, "y": 2 },
-                { "label": "K", "x": 8.75, "y": 2 },
-                { "label": "L", "x": 9.75, "y": 2 },
-                { "label": ":", "x": 10.75, "y": 2 },
-                { "label": "\"", "x": 11.75, "y": 2 },
-                { "label": "Enter", "w": 2.25, "x": 12.75, "y": 2 },
-                { "label": "Shift", "w": 1.25, "x": 0, "y": 3 },
-                { "label": "ISO", "x": 1.25, "y": 3 },
-                { "label": "Z", "x": 2.25, "y": 3 },
-                { "label": "X", "x": 3.25, "y": 3 },
-                { "label": "C", "x": 4.25, "y": 3 },
-                { "label": "V", "x": 5.25, "y": 3 },
-                { "label": "B", "x": 6.25, "y": 3 },
-                { "label": "N", "x": 7.25, "y": 3 },
-                { "label": "M", "x": 8.25, "y": 3 },
-                { "label": "<", "x": 9.25, "y": 3 },
-                { "label": ">", "x": 10.25, "y": 3 },
-                { "label": "?", "x": 11.25, "y": 3 },
-                { "label": "Shift", "w": 1.75, "x": 12.25, "y": 3 },
-                { "label": "Fn", "x": 14, "y": 3 },
-                { "label": "Ctrl", "w": 1.25, "x": 0, "y": 4 },
-                { "label": "Win", "w": 1.25, "x": 1.25, "y": 4 },
-                { "label": "Alt", "w": 1.25, "x": 2.5, "y": 4 },
-                { "w": 6.25, "x": 3.75, "y": 4 },
-                { "label": "Alt", "w": 1.25, "x": 10, "y": 4 },
-                { "label": "Win", "w": 1.25, "x": 11.25, "y": 4 },
-                { "label": "Menu", "w": 1.25, "x": 12.5, "y": 4 },
-                { "label": "Ctrl", "w": 1.25, "x": 13.75, "y": 4 }
+                {"label":"`~", "x":0, "y":0},
+                {"label":"1!", "x":1, "y":0},
+                {"label":"2@", "x":2, "y":0},
+                {"label":"3#", "x":3, "y":0},
+                {"label":"4$", "x":4, "y":0},
+                {"label":"5%", "x":5, "y":0},
+                {"label":"6^", "x":6, "y":0},
+                {"label":"7&", "x":7, "y":0},
+                {"label":"8*", "x":8, "y":0},
+                {"label":"9(", "x":9, "y":0},
+                {"label":"0)", "x":10, "y":0},
+                {"label":"-_", "x":11, "y":0},
+                {"label":"=+", "x":12, "y":0},
+                {"label":"Backspace", "x":13, "y":0},
+                {"label":"Backspace", "x":14, "y":0},
+
+                {"label":"Tab", "w":1.5, "x":0, "y":1},
+                {"label":"Q", "x":1.5, "y":1},
+                {"label":"W", "x":2.5, "y":1},
+                {"label":"E", "x":3.5, "y":1},
+                {"label":"R", "x":4.5, "y":1},
+                {"label":"T", "x":5.5, "y":1},
+                {"label":"Y", "x":6.5, "y":1},
+                {"label":"U", "x":7.5, "y":1},
+                {"label":"I", "x":8.5, "y":1},
+                {"label":"O", "x":9.5, "y":1},
+                {"label":"P", "x":10.5, "y":1},
+                {"label":"[{", "x":11.5, "y":1},
+                {"label":"]}", "x":12.5, "y":1},
+                {"label":"\\|", "w":1.5, "x":13.5, "y":1},
+
+                {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
+                {"label":"A", "x":1.75, "y":2},
+                {"label":"S", "x":2.75, "y":2},
+                {"label":"D", "x":3.75, "y":2},
+                {"label":"F", "x":4.75, "y":2},
+                {"label":"G", "x":5.75, "y":2},
+                {"label":"H", "x":6.75, "y":2},
+                {"label":"J", "x":7.75, "y":2},
+                {"label":"K", "x":8.75, "y":2},
+                {"label":"L", "x":9.75, "y":2},
+                {"label":";:", "x":10.75, "y":2},
+                {"label":"'\"", "x":11.75, "y":2},
+                {"label":"Enter", "x":12.75, "y":2, "w":2.25},
+
+                {"label":"Shift", "w":1.25, "x":0, "y":3},
+                {"label":"\\|", "x":1.25, "y":3},
+                {"label":"Z", "x":2.25, "y":3},
+                {"label":"X", "x":3.25, "y":3},
+                {"label":"C", "x":4.25, "y":3},
+                {"label":"V", "x":5.25, "y":3},
+                {"label":"B", "x":6.25, "y":3},
+                {"label":"N", "x":7.25, "y":3},
+                {"label":"M", "x":8.25, "y":3},
+                {"label":",<", "x":9.25, "y":3},
+                {"label":".>", "x":10.25, "y":3},
+                {"label":"/?", "x":11.25, "y":3},
+                {"label":"Shift", "w":1.75, "x":12.25, "y":3},
+                {"label":"Fn", "x":14, "y":3},
+
+                {"label":"Ctrl", "w":1.25, "x":0, "y":4},
+                {"label":"Win", "w":1.25, "x":1.25, "y":4},
+                {"label":"Alt", "w":1.25, "x":2.5, "y":4},
+                {"label":"Space", "w":6.25, "x":3.75, "y":4},
+                {"label":"Alt", "w":1.25, "x":10, "y":4},
+                {"label":"Win", "w":1.25, "x":11.25, "y":4},
+                {"label":"Menu", "w":1.25, "x":12.5, "y":4},
+                {"label":"Ctrl", "w":1.25, "x":13.75, "y":4}
+            ]
+        },
+        "LAYOUT_60_iso": {
+            "layout": [
+                {"label":"`\u00ac", "x":0, "y":0},
+                {"label":"1!", "x":1, "y":0},
+                {"label":"2\"", "x":2, "y":0},
+                {"label":"3\u00a3", "x":3, "y":0},
+                {"label":"4$", "x":4, "y":0},
+                {"label":"5%", "x":5, "y":0},
+                {"label":"6^", "x":6, "y":0},
+                {"label":"7&", "x":7, "y":0},
+                {"label":"8*", "x":8, "y":0},
+                {"label":"9(", "x":9, "y":0},
+                {"label":"0)", "x":10, "y":0},
+                {"label":"-_", "x":11, "y":0},
+                {"label":"=+", "x":12, "y":0},
+                {"label":"Backspace", "x":13, "y":0, "w":2},
+
+                {"label":"Tab", "x":0, "y":1, "w":1.5},
+                {"label":"Q", "x":1.5, "y":1},
+                {"label":"W", "x":2.5, "y":1},
+                {"label":"E", "x":3.5, "y":1},
+                {"label":"R", "x":4.5, "y":1},
+                {"label":"T", "x":5.5, "y":1},
+                {"label":"Y", "x":6.5, "y":1},
+                {"label":"U", "x":7.5, "y":1},
+                {"label":"I", "x":8.5, "y":1},
+                {"label":"O", "x":9.5, "y":1},
+                {"label":"P", "x":10.5, "y":1},
+                {"label":"[{", "x":11.5, "y":1},
+                {"label":"]}", "x":12.5, "y":1},
+
+                {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
+                {"label":"A", "x":1.75, "y":2},
+                {"label":"S", "x":2.75, "y":2},
+                {"label":"D", "x":3.75, "y":2},
+                {"label":"F", "x":4.75, "y":2},
+                {"label":"G", "x":5.75, "y":2},
+                {"label":"H", "x":6.75, "y":2},
+                {"label":"J", "x":7.75, "y":2},
+                {"label":"K", "x":8.75, "y":2},
+                {"label":"L", "x":9.75, "y":2},
+                {"label":";:", "x":10.75, "y":2},
+                {"label":"'@", "x":11.75, "y":2},
+                {"label":"#~", "x":12.75, "y":2},
+                {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2},
+
+                {"label":"Shift", "x":0, "y":3, "w":1.25},
+                {"label":"\\|", "x":1.25, "y":3},
+                {"label":"Z", "x":2.25, "y":3},
+                {"label":"X", "x":3.25, "y":3},
+                {"label":"C", "x":4.25, "y":3},
+                {"label":"V", "x":5.25, "y":3},
+                {"label":"B", "x":6.25, "y":3},
+                {"label":"N", "x":7.25, "y":3},
+                {"label":"M", "x":8.25, "y":3},
+                {"label":",<", "x":9.25, "y":3},
+                {"label":".>", "x":10.25, "y":3},
+                {"label":"/?", "x":11.25, "y":3},
+                {"label":"Shift", "x":12.25, "y":3, "w":2.75},
+
+                {"label":"Ctrl", "x":0, "y":4, "w":1.25},
+                {"label":"Win", "x":1.25, "y":4, "w":1.25},
+                {"label":"Alt", "x":2.5, "y":4, "w":1.25},
+                {"label":"Space", "x":3.75, "y":4, "w":6.25},
+                {"label":"Alt", "x":10, "y":4, "w":1.25},
+                {"label":"Win", "x":11.25, "y":4, "w":1.25},
+                {"label":"Menu", "x":12.5, "y":4, "w":1.25},
+                {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}
+            ]
+        },
+        "LAYOUT_60_iso_split_bs_rshift": {
+            "layout": [
+                {"label":"`\u00ac", "x":0, "y":0},
+                {"label":"1!", "x":1, "y":0},
+                {"label":"2\"", "x":2, "y":0},
+                {"label":"3\u00a3", "x":3, "y":0},
+                {"label":"4$", "x":4, "y":0},
+                {"label":"5%", "x":5, "y":0},
+                {"label":"6^", "x":6, "y":0},
+                {"label":"7&", "x":7, "y":0},
+                {"label":"8*", "x":8, "y":0},
+                {"label":"9(", "x":9, "y":0},
+                {"label":"0)", "x":10, "y":0},
+                {"label":"-_", "x":11, "y":0},
+                {"label":"=+", "x":12, "y":0},
+                {"label":"Backspace", "x":13, "y":0},
+                {"label":"Backspace", "x":14, "y":0},
+
+                {"label":"Tab", "x":0, "y":1, "w":1.5},
+                {"label":"Q", "x":1.5, "y":1},
+                {"label":"W", "x":2.5, "y":1},
+                {"label":"E", "x":3.5, "y":1},
+                {"label":"R", "x":4.5, "y":1},
+                {"label":"T", "x":5.5, "y":1},
+                {"label":"Y", "x":6.5, "y":1},
+                {"label":"U", "x":7.5, "y":1},
+                {"label":"I", "x":8.5, "y":1},
+                {"label":"O", "x":9.5, "y":1},
+                {"label":"P", "x":10.5, "y":1},
+                {"label":"[{", "x":11.5, "y":1},
+                {"label":"]}", "x":12.5, "y":1},
+
+                {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
+                {"label":"A", "x":1.75, "y":2},
+                {"label":"S", "x":2.75, "y":2},
+                {"label":"D", "x":3.75, "y":2},
+                {"label":"F", "x":4.75, "y":2},
+                {"label":"G", "x":5.75, "y":2},
+                {"label":"H", "x":6.75, "y":2},
+                {"label":"J", "x":7.75, "y":2},
+                {"label":"K", "x":8.75, "y":2},
+                {"label":"L", "x":9.75, "y":2},
+                {"label":";:", "x":10.75, "y":2},
+                {"label":"'@", "x":11.75, "y":2},
+                {"label":"#~", "x":12.75, "y":2},
+                {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2},
+
+                {"label":"Shift", "x":0, "y":3, "w":1.25},
+                {"label":"\\|", "x":1.25, "y":3},
+                {"label":"Z", "x":2.25, "y":3},
+                {"label":"X", "x":3.25, "y":3},
+                {"label":"C", "x":4.25, "y":3},
+                {"label":"V", "x":5.25, "y":3},
+                {"label":"B", "x":6.25, "y":3},
+                {"label":"N", "x":7.25, "y":3},
+                {"label":"M", "x":8.25, "y":3},
+                {"label":",<", "x":9.25, "y":3},
+                {"label":".>", "x":10.25, "y":3},
+                {"label":"/?", "x":11.25, "y":3},
+                {"label":"Shift", "x":12.25, "y":3, "w":1.75},
+                {"label":"Fn", "x":14, "y":3},
+
+                {"label":"Ctrl", "x":0, "y":4, "w":1.25},
+                {"label":"Win", "x":1.25, "y":4, "w":1.25},
+                {"label":"Alt", "x":2.5, "y":4, "w":1.25},
+                {"label":"Space", "x":3.75, "y":4, "w":6.25},
+                {"label":"Alt", "x":10, "y":4, "w":1.25},
+                {"label":"Win", "x":11.25, "y":4, "w":1.25},
+                {"label":"Menu", "x":12.5, "y":4, "w":1.25},
+                {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}
+            ]
+        },
+        "LAYOUT_60_ansi": {
+            "layout": [
+                {"label":"`~", "x":0, "y":0},
+                {"label":"1!", "x":1, "y":0},
+                {"label":"2@", "x":2, "y":0},
+                {"label":"3#", "x":3, "y":0},
+                {"label":"4$", "x":4, "y":0},
+                {"label":"5%", "x":5, "y":0},
+                {"label":"6^", "x":6, "y":0},
+                {"label":"7&", "x":7, "y":0},
+                {"label":"8*", "x":8, "y":0},
+                {"label":"9(", "x":9, "y":0},
+                {"label":"0)", "x":10, "y":0},
+                {"label":"-_", "x":11, "y":0},
+                {"label":"=+", "x":12, "y":0},
+                {"label":"Backspace", "x":13, "y":0, "w":2},
+
+                {"label":"Tab", "x":0, "y":1, "w":1.5},
+                {"label":"Q", "x":1.5, "y":1},
+                {"label":"W", "x":2.5, "y":1},
+                {"label":"E", "x":3.5, "y":1},
+                {"label":"R", "x":4.5, "y":1},
+                {"label":"T", "x":5.5, "y":1},
+                {"label":"Y", "x":6.5, "y":1},
+                {"label":"U", "x":7.5, "y":1},
+                {"label":"I", "x":8.5, "y":1},
+                {"label":"O", "x":9.5, "y":1},
+                {"label":"P", "x":10.5, "y":1},
+                {"label":"[{", "x":11.5, "y":1},
+                {"label":"]}", "x":12.5, "y":1},
+                {"label":"\\|", "x":13.5, "y":1, "w":1.5},
+
+                {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
+                {"label":"A", "x":1.75, "y":2},
+                {"label":"S", "x":2.75, "y":2},
+                {"label":"D", "x":3.75, "y":2},
+                {"label":"F", "x":4.75, "y":2},
+                {"label":"G", "x":5.75, "y":2},
+                {"label":"H", "x":6.75, "y":2},
+                {"label":"J", "x":7.75, "y":2},
+                {"label":"K", "x":8.75, "y":2},
+                {"label":"L", "x":9.75, "y":2},
+                {"label":";:", "x":10.75, "y":2},
+                {"label":"'\"", "x":11.75, "y":2},
+                {"label":"Enter", "x":12.75, "y":2, "w":2.25},
+
+                {"label":"Shift", "x":0, "y":3, "w":2.25},
+                {"label":"Z", "x":2.25, "y":3},
+                {"label":"X", "x":3.25, "y":3},
+                {"label":"C", "x":4.25, "y":3},
+                {"label":"V", "x":5.25, "y":3},
+                {"label":"B", "x":6.25, "y":3},
+                {"label":"N", "x":7.25, "y":3},
+                {"label":"M", "x":8.25, "y":3},
+                {"label":",<", "x":9.25, "y":3},
+                {"label":".>", "x":10.25, "y":3},
+                {"label":"/?", "x":11.25, "y":3},
+                {"label":"Shift", "x":12.25, "y":3, "w":2.75},
+
+                {"label":"Ctrl", "x":0, "y":4, "w":1.25},
+                {"label":"Win", "x":1.25, "y":4, "w":1.25},
+                {"label":"Alt", "x":2.5, "y":4, "w":1.25},
+                {"label":"Space", "x":3.75, "y":4, "w":6.25},
+                {"label":"Alt", "x":10, "y":4, "w":1.25},
+                {"label":"Win", "x":11.25, "y":4, "w":1.25},
+                {"label":"Menu", "x":12.5, "y":4, "w":1.25},
+                {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}
+            ]
+        },
+        "LAYOUT_60_ansi_split_bs_rshift": {
+            "layout": [
+                {"label":"`~", "x":0, "y":0},
+                {"label":"1!", "x":1, "y":0},
+                {"label":"2@", "x":2, "y":0},
+                {"label":"3#", "x":3, "y":0},
+                {"label":"4$", "x":4, "y":0},
+                {"label":"5%", "x":5, "y":0},
+                {"label":"6^", "x":6, "y":0},
+                {"label":"7&", "x":7, "y":0},
+                {"label":"8*", "x":8, "y":0},
+                {"label":"9(", "x":9, "y":0},
+                {"label":"0)", "x":10, "y":0},
+                {"label":"-_", "x":11, "y":0},
+                {"label":"=+", "x":12, "y":0},
+                {"label":"Backspace", "x":13, "y":0},
+                {"label":"Backspace", "x":14, "y":0},
+
+                {"label":"Tab", "x":0, "y":1, "w":1.5},
+                {"label":"Q", "x":1.5, "y":1},
+                {"label":"W", "x":2.5, "y":1},
+                {"label":"E", "x":3.5, "y":1},
+                {"label":"R", "x":4.5, "y":1},
+                {"label":"T", "x":5.5, "y":1},
+                {"label":"Y", "x":6.5, "y":1},
+                {"label":"U", "x":7.5, "y":1},
+                {"label":"I", "x":8.5, "y":1},
+                {"label":"O", "x":9.5, "y":1},
+                {"label":"P", "x":10.5, "y":1},
+                {"label":"[{", "x":11.5, "y":1},
+                {"label":"]}", "x":12.5, "y":1},
+                {"label":"\\|", "x":13.5, "y":1, "w":1.5},
+
+                {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
+                {"label":"A", "x":1.75, "y":2},
+                {"label":"S", "x":2.75, "y":2},
+                {"label":"D", "x":3.75, "y":2},
+                {"label":"F", "x":4.75, "y":2},
+                {"label":"G", "x":5.75, "y":2},
+                {"label":"H", "x":6.75, "y":2},
+                {"label":"J", "x":7.75, "y":2},
+                {"label":"K", "x":8.75, "y":2},
+                {"label":"L", "x":9.75, "y":2},
+                {"label":";:", "x":10.75, "y":2},
+                {"label":"'\"", "x":11.75, "y":2},
+                {"label":"Enter", "x":12.75, "y":2, "w":2.25},
+
+                {"label":"Shift", "x":0, "y":3, "w":2.25},
+                {"label":"Z", "x":2.25, "y":3},
+                {"label":"X", "x":3.25, "y":3},
+                {"label":"C", "x":4.25, "y":3},
+                {"label":"V", "x":5.25, "y":3},
+                {"label":"B", "x":6.25, "y":3},
+                {"label":"N", "x":7.25, "y":3},
+                {"label":"M", "x":8.25, "y":3},
+                {"label":",<", "x":9.25, "y":3},
+                {"label":".>", "x":10.25, "y":3},
+                {"label":"/?", "x":11.25, "y":3},
+                {"label":"Shift", "x":12.25, "y":3, "w":1.75},
+                {"label":"Fn", "x":14, "y":3},
+
+                {"label":"Ctrl", "x":0, "y":4, "w":1.25},
+                {"label":"Win", "x":1.25, "y":4, "w":1.25},
+                {"label":"Alt", "x":2.5, "y":4, "w":1.25},
+                {"label":"Space", "x":3.75, "y":4, "w":6.25},
+                {"label":"Alt", "x":10, "y":4, "w":1.25},
+                {"label":"Win", "x":11.25, "y":4, "w":1.25},
+                {"label":"Menu", "x":12.5, "y":4, "w":1.25},
+                {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}
             ]
         }
-
-
     }
 }

keyboards/kbnordic/nordic60/keymaps/default/keymap.c

@@ -17,18 +17,20 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-// main layer
-[0] = LAYOUT_iso(
-  KC_ESC,   KC_1,     KC_2,     KC_3,     KC_4,     KC_5,       KC_6,      KC_7,      KC_8,      KC_9,       KC_0,    KC_MINS, KC_EQL, KC_BSPC,
-  KC_TAB,   KC_Q,     KC_W,     KC_E,     KC_R,     KC_T,       KC_Y,      KC_U,      KC_I,      KC_O,       KC_P,    KC_LBRC, KC_RBRC, KC_ENT,
-  KC_CAPS,  KC_A,     KC_S,     KC_D,     KC_F,     KC_G,       KC_H,      KC_J,      KC_K,      KC_L,       KC_SCLN, KC_QUOT,          KC_NUHS,
-  KC_LSFT,  KC_NUBS,  KC_Z,     KC_X,     KC_C,     KC_V,       KC_B,      KC_N,      KC_M,      KC_COMM,    KC_DOT,  KC_SLSH, KC_RSFT, MO(1),
-  KC_LCTL,  KC_LGUI,  KC_LALT,                                  KC_SPC,                                      KC_RALT, KC_RGUI, KC_APP,  KC_RCTL),
-// basic function layer
-[1] = LAYOUT_iso(
-  RESET,    KC_F1,    KC_F2,    KC_F3,    KC_F4,     KC_F5,     KC_F6,     KC_F7,     KC_F8,     KC_F9,      KC_F10,  KC_F11,   KC_F12, KC_TRNS,
-  KC_TRNS,  KC_TRNS,  KC_UP,    KC_TRNS,  KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,    KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS,
-  KC_TRNS,  KC_LEFT,  KC_DOWN,  KC_RIGHT, KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,    KC_TRNS, KC_TRNS,           KC_TRNS,
-  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,    KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS,
-  KC_TRNS,  KC_TRNS,  KC_TRNS,                                  KC_TRNS,                                     KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS)
+    // main layer
+    [0] = LAYOUT_60_iso_split_bs_rshift(
+        KC_ESC,   KC_1,     KC_2,     KC_3,     KC_4,     KC_5,     KC_6,     KC_7,     KC_8,     KC_9,     KC_0,     KC_MINS,  KC_EQL,   KC_BSPC,  KC_BSPC,
+        KC_TAB,   KC_Q,     KC_W,     KC_E,     KC_R,     KC_T,     KC_Y,     KC_U,     KC_I,     KC_O,     KC_P,     KC_LBRC,  KC_RBRC,
+        KC_CAPS,  KC_A,     KC_S,     KC_D,     KC_F,     KC_G,     KC_H,     KC_J,     KC_K,     KC_L,     KC_SCLN,  KC_QUOT,  KC_NUHS,  KC_ENT,
+        KC_LSFT,  KC_NUBS,  KC_Z,     KC_X,     KC_C,     KC_V,     KC_B,     KC_N,     KC_M,     KC_COMM,  KC_DOT,   KC_SLSH,  KC_RSFT,  MO(1),
+        KC_LCTL,  KC_LGUI,  KC_LALT,                                KC_SPC,                                 KC_RALT,  KC_RGUI,  KC_APP,   KC_RCTL
+    ),
+    // basic function layer
+    [1] = LAYOUT_60_iso_split_bs_rshift(
+        RESET,    KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,   KC_TRNS,  KC_TRNS,
+        KC_TRNS,  KC_TRNS,  KC_UP,    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
+        KC_TRNS,  KC_LEFT,  KC_DOWN,  KC_RGHT,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
+        KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
+        KC_TRNS,  KC_TRNS,  KC_TRNS,                                KC_TRNS,                                KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS
+    )
 };

keyboards/kbnordic/nordic60/keymaps/default_ansi/keymap.c

@@ -17,18 +17,20 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-// main layer
-[0] = LAYOUT_ansi(
-  KC_ESC,   KC_1,     KC_2,     KC_3,     KC_4,     KC_5,       KC_6,      KC_7,      KC_8,      KC_9,       KC_0,    KC_MINS, KC_EQL, KC_BSPC,
-  KC_TAB,   KC_Q,     KC_W,     KC_E,     KC_R,     KC_T,       KC_Y,      KC_U,      KC_I,      KC_O,       KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
-  KC_CAPS,  KC_A,     KC_S,     KC_D,     KC_F,     KC_G,       KC_H,      KC_J,      KC_K,      KC_L,       KC_SCLN, KC_QUOT,          KC_ENT,
-  KC_LSFT,  KC_Z,     KC_X,     KC_C,     KC_V,       KC_B,      KC_N,      KC_M,      KC_COMM,    KC_DOT,  KC_SLSH, KC_RSFT, MO(1),
-  KC_LCTL,  KC_LGUI,  KC_LALT,                                  KC_SPC,                                      KC_RALT, KC_RGUI, KC_APP,  KC_RCTL),
-// basic function layer
-[1] = LAYOUT_ansi(
-  RESET,    KC_F1,    KC_F2,    KC_F3,    KC_F4,     KC_F5,     KC_F6,     KC_F7,     KC_F8,     KC_F9,      KC_F10,  KC_F11,   KC_F12, KC_TRNS,
-  KC_TRNS,  KC_TRNS,  KC_UP,    KC_TRNS,  KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,    KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS,
-  KC_TRNS,  KC_LEFT,  KC_DOWN,  KC_RIGHT, KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,    KC_TRNS, KC_TRNS,           KC_TRNS,
-  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,    KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS,
-  KC_TRNS,  KC_TRNS,  KC_TRNS,                                  KC_TRNS,                                     KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS)
+    // main layer
+    [0] = LAYOUT_60_ansi(
+        KC_ESC,   KC_1,     KC_2,     KC_3,     KC_4,     KC_5,     KC_6,     KC_7,     KC_8,     KC_9,     KC_0,     KC_MINS,  KC_EQL,   KC_BSPC,
+        KC_TAB,   KC_Q,     KC_W,     KC_E,     KC_R,     KC_T,     KC_Y,     KC_U,     KC_I,     KC_O,     KC_P,     KC_LBRC,  KC_RBRC,  KC_BSLS,
+        KC_CAPS,  KC_A,     KC_S,     KC_D,     KC_F,     KC_G,     KC_H,     KC_J,     KC_K,     KC_L,     KC_SCLN,  KC_QUOT,            KC_ENT,
+        KC_LSFT,            KC_Z,     KC_X,     KC_C,     KC_V,     KC_B,     KC_N,     KC_M,     KC_COMM,  KC_DOT,   KC_SLSH,            KC_RSFT,
+        KC_LCTL,  KC_LGUI,  KC_LALT,                                KC_SPC,                                 KC_RALT,  KC_RGUI,  KC_APP,   KC_RCTL
+    ),
+    // basic function layer
+    [1] = LAYOUT_60_ansi(
+        RESET,    KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,   KC_TRNS,
+        KC_TRNS,  KC_TRNS,  KC_UP,    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
+        KC_TRNS,  KC_LEFT,  KC_DOWN,  KC_RGHT,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,            KC_TRNS,
+        KC_TRNS,            KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,            KC_TRNS,
+        KC_TRNS,  KC_TRNS,  KC_TRNS,                                KC_TRNS,                                KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS
+    )
 };

keyboards/kbnordic/nordic60/rev_a/rev_a.h

@@ -18,6 +18,24 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "quantum.h"
 
+#define XXX KC_NO
+
+/*              ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐      ┌───────┐
+ *              │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0d │1d │      │1d     │ 2u Backspace
+ *              ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤      └─┬─────┤
+ *              │10   │11 │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │2c   │        │     │
+ *  2.25u       ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤     ┌──┴┐2d  │ ISO Enter
+ *  LShift      │20    │21 │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2d      │     │2c │    │
+ * ┌────────┐   ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤   ┌─┴───┴────┤
+ * │30      │   │30  │31 │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3c    │3d │   │3c        │ 2.75u RShift
+ * └────────┘   ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬┴───┤   └──────────┘
+ *              │40  │41  │42  │46                      │4a  │4b  │4c  │4d  │
+ *              └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘
+ *              ┌─────┬───┬─────┬───────────────────────────┬─────┬───┬─────┐
+ *              │40   │41 │42   │46                         │4b   │4c │4d   │ Tsangan/WKL
+ *              └─────┴───┴─────┴───────────────────────────┴─────┴───┴─────┘
+ */
+
 #define LAYOUT_all( \
     k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k1d, \
     k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k2c, \
@@ -30,35 +48,65 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
     {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \
     {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \
-    {k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO, KC_NO, KC_NO, k4a, k4b, k4c, k4d}, \
+    {k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, k4a, k4b, k4c, k4d}, \
 }
 
-#define LAYOUT_iso( \
+#define LAYOUT_60_iso( \
     k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k1d, \
-    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k2d, \
-    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \
-    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \
-    k40, k41, k42, k46, k4a, k4b, k4c, k4d  \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c,      \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b,      k3c, \
+    k40, k41, k42,                k46,                k4a, k4b, k4c, k4d  \
 ) \
 { \
-    {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, KC_NO}, \
+    {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, XXX}, \
+    {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
+    {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \
+    {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, XXX}, \
+    {k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, k4a, k4b, k4c, k4d}, \
+}
+
+#define LAYOUT_60_iso_split_bs_rshift( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k1d, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c,      \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \
+    k40, k41, k42,                k46,                k4a, k4b, k4c, k4d  \
+) \
+{ \
+    {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
     {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
     {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \
     {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \
-    {k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO, KC_NO, KC_NO, k4a, k4b, k4c, k4d}, \
+    {k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, k4a, k4b, k4c, k4d}, \
 }
 
-#define LAYOUT_ansi( \
+#define LAYOUT_60_ansi( \
     k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k1d, \
     k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k2c, \
-    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \
-    k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \
-    k40, k41, k42, k46, k4a, k4b, k4c, k4d  \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b,      k2d, \
+    k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b,      k3c, \
+    k40, k41, k42,                k46,                k4a, k4b, k4c, k4d  \
 ) \
 { \
-    {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, KC_NO}, \
+    {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, XXX}, \
     {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
     {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \
-    {k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \
-    {k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO, KC_NO, KC_NO, k4a, k4b, k4c, k4d}, \
+    {k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, XXX}, \
+    {k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, k4a, k4b, k4c, k4d}, \
+}
+
+#define LAYOUT_60_ansi_split_bs_rshift( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k1d, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k2c, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b,      k2d, \
+    k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \
+    k40, k41, k42,                k46,                k4a, k4b, k4c, k4d  \
+) \
+{ \
+    {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
+    {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
+    {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \
+    {k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \
+    {k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, k4a, k4b, k4c, k4d}, \
 }

keyboards/keebio/iris/keymaps/manna-harbour_miryoku/config.h

@@ -1,6 +1,6 @@
 // Copyright 2019 Manna Harbour
 // https://github.com/manna-harbour/miryoku
-// generated from users/manna-harbour_miryoku/miryoku.org  -*- buffer-read-only: t -*-
+// generated -*- buffer-read-only: t -*-
 
 // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>.
 

keyboards/keebio/iris/keymaps/manna-harbour_miryoku/keymap.c

@@ -1,5 +1,5 @@
 // Copyright 2019 Manna Harbour
 // https://github.com/manna-harbour/miryoku
-// generated from users/manna-harbour_miryoku/miryoku.org  -*- buffer-read-only: t -*-
+// generated -*- buffer-read-only: t -*-
 
 // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>.