Allow community layouts to be specified in info.json (#14682)

* move the community layout detection to python

* fixup tests

Makefile

@@ -303,37 +303,8 @@ define PARSE_KEYBOARD
     KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_3)/keymaps/*/.)))
     KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_4)/keymaps/*/.)))
     KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_5)/keymaps/*/.)))
-    # this might be needed, but in a different form
-    #KEYMAPS := $$(sort $$(filter-out $$(KEYBOARD_FOLDER_1) $$(KEYBOARD_FOLDER_2) \
-        $$(KEYBOARD_FOLDER_3) $$(KEYBOARD_FOLDER_4) $$(KEYBOARD_FOLDER_5), $$(KEYMAPS)))
-
-    KEYBOARD_LAYOUTS :=
-    ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_5)/rules.mk)","")
-      LAYOUTS :=
-      $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_5)/rules.mk)
-      KEYBOARD_LAYOUTS := $$(sort $$(LAYOUTS) $$(KEYBOARD_LAYOUTS))
-    endif
-    ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_4)/rules.mk)","")
-      LAYOUTS :=
-      $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_4)/rules.mk)
-      KEYBOARD_LAYOUTS := $$(sort $$(LAYOUTS) $$(KEYBOARD_LAYOUTS))
-    endif
-    ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_3)/rules.mk)","")
-      LAYOUTS :=
-      $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_3)/rules.mk)
-      KEYBOARD_LAYOUTS := $$(sort $$(LAYOUTS) $$(KEYBOARD_LAYOUTS))
-    endif
-    ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_2)/rules.mk)","")
-      LAYOUTS :=
-      $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_2)/rules.mk)
-      KEYBOARD_LAYOUTS := $$(sort $$(LAYOUTS) $$(KEYBOARD_LAYOUTS))
-    endif
-    ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_1)/rules.mk)","")
-      LAYOUTS :=
-      $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_1)/rules.mk)
-      KEYBOARD_LAYOUTS := $$(sort $$(LAYOUTS) $$(KEYBOARD_LAYOUTS))
-    endif
 
+    KEYBOARD_LAYOUTS := $(shell $(QMK_BIN) list-layouts --keyboard $1)
     LAYOUT_KEYMAPS :=
     $$(foreach LAYOUT,$$(KEYBOARD_LAYOUTS),$$(eval LAYOUT_KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(ROOT_DIR)/layouts/*/$$(LAYOUT)/*/.)))))
 

bootloader.mk

@@ -21,19 +21,19 @@
 # Current options:
 #
 # AVR:
-#     halfkay     PJRC Teensy
-#     caterina    Pro Micro (Sparkfun/generic)
-#     atmel-dfu   Atmel factory DFU
-#     lufa-dfu    LUFA DFU
-#     qmk-dfu     QMK DFU (LUFA + blinkenlight)
-#     qmk-hid     QMK HID (LUFA + blinkenlight)
-#     bootloadHID HIDBootFlash compatible (ATmega32A)
-#     USBasp      USBaspLoader (ATmega328P)
+#     halfkay      PJRC Teensy
+#     caterina     Pro Micro (Sparkfun/generic)
+#     atmel-dfu    Atmel factory DFU
+#     lufa-dfu     LUFA DFU
+#     qmk-dfu      QMK DFU (LUFA + blinkenlight)
+#     qmk-hid      QMK HID (LUFA + blinkenlight)
+#     bootloadhid  HIDBootFlash compatible (ATmega32A)
+#     usbasploader USBaspLoader (ATmega328P)
 # ARM:
-#     kiibohd     Input:Club Kiibohd bootloader (only used on their boards)
-#     stm32duino  STM32Duino (STM32F103x8)
-#     stm32-dfu   STM32 USB DFU in ROM
-#     apm32-dfu   APM32 USB DFU in ROM
+#     kiibohd      Input:Club Kiibohd bootloader (only used on their boards)
+#     stm32duino   STM32Duino (STM32F103x8)
+#     stm32-dfu    STM32 USB DFU in ROM
+#     apm32-dfu    APM32 USB DFU in ROM
 #
 # BOOTLOADER_SIZE can still be defined manually, but it's recommended
 # you add any possible configuration to this list
@@ -86,11 +86,11 @@ ifeq ($(strip $(BOOTLOADER)), caterina)
     OPT_DEFS += -DBOOTLOADER_CATERINA
     BOOTLOADER_SIZE = 4096
 endif
-ifeq ($(strip $(BOOTLOADER)), bootloadHID)
+ifneq (,$(filter $(BOOTLOADER), bootloadhid bootloadHID))
     OPT_DEFS += -DBOOTLOADER_BOOTLOADHID
     BOOTLOADER_SIZE = 4096
 endif
-ifeq ($(strip $(BOOTLOADER)), USBasp)
+ifneq (,$(filter $(BOOTLOADER), usbasploader USBasp))
     OPT_DEFS += -DBOOTLOADER_USBASP
     BOOTLOADER_SIZE = 4096
 endif

data/schemas/keyboard.jsonschema

@@ -56,7 +56,7 @@
         },
         "bootloader": {
             "type": "string",
-            "enum": ["atmel-dfu", "bootloadHID", "caterina", "halfkay", "kiibohd", "lufa-dfu", "lufa-ms", "micronucleus", "qmk-dfu", "qmk-hid", "stm32-dfu", "stm32duino", "unknown", "USBasp", "tinyuf2"],
+            "enum": ["atmel-dfu", "bootloadhid", "bootloadHID", "caterina", "halfkay", "kiibohd", "lufa-dfu", "lufa-ms", "micronucleus", "qmk-dfu", "qmk-hid", "stm32-dfu", "stm32duino", "unknown", "usbasploader", "USBasp", "tinyuf2"],
         },
         "bootloader_instructions": {
             "type": "string",
@@ -118,7 +118,6 @@
                     "c_macro": {
                         "type": "boolean"
                     },
-                    "key_count": {"$ref": "qmk.definitions.v1#/key_unit"},
                     "layout": {
                         "type": "array",
                         "items": {
@@ -136,7 +135,6 @@
                                         "multipleOf": 1
                                     }
                                 },
-                                "key_count": {"$ref": "qmk.definitions.v1#/key_unit"},
                                 "r": {"$ref": "qmk.definitions.v1#/unsigned_decimal"},
                                 "rx": {"$ref": "qmk.definitions.v1#/unsigned_decimal"},
                                 "ry": {"$ref": "qmk.definitions.v1#/unsigned_decimal"},

data/templates/avr/rules.mk

@@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-BLUETOOTH_ENABLE = no       # Enable Bluetooth
 AUDIO_ENABLE = no           # Audio output

data/templates/base/info.json

@@ -2,8 +2,6 @@
     "keyboard_name": "%KEYBOARD%",
     "url": "",
     "maintainer": "%YOUR_NAME%",
-    "width": 3,
-    "height": 2,
     "layouts": {
         "LAYOUT": {
             "layout": [

data/templates/ps2avrgb/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega32a
 
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 
 # Build Options
 #   change yes to no to disable

docs/config_options.md

@@ -397,8 +397,8 @@ However, this will automatically disable the legacy TMK Macros and Functions fea
   * `qmk-dfu`
   * `halfkay`
   * `caterina`
-  * `bootloadHID`
-  * `USBasp`
+  * `bootloadhid`
+  * `usbasploader`
 
 ## Feature Options :id=feature-options
 
@@ -418,6 +418,8 @@ Use these to enable or disable building certain features. The more you have enab
   * Key combo feature
 * `NKRO_ENABLE`
   * USB N-Key Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+* `RING_BUFFERED_6KRO_REPORT_ENABLE`
+  * USB 6-Key Rollover - Instead of stopping any new input once 6 keys are pressed, the oldest key is released and the new key is pressed. 
 * `AUDIO_ENABLE`
   * Enable the audio subsystem.
 * `KEY_OVERRIDE_ENABLE`

docs/custom_quantum_functions.md

@@ -148,8 +148,8 @@ This is useful for setting up stuff that you may need elsewhere, but isn't hardw
 
 * GPIO pin initialisation: `void matrix_init_pins(void)`
   * This needs to perform the low-level initialisation of all row and column pins. By default this will initialise the input/output state of each of the GPIO pins listed in `MATRIX_ROW_PINS` and `MATRIX_COL_PINS`, based on whether or not the keyboard is set up for `ROW2COL`, `COL2ROW`, or `DIRECT_PINS`. Should the keyboard designer override this function, no initialisation of pin state will occur within QMK itself, instead deferring to the keyboard's override.
-* `COL2ROW`-based row reads: `void matrix_read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)`
-* `ROW2COL`-based column reads: `void matrix_read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)`
+* `COL2ROW`-based row reads: `void matrix_read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)`
+* `ROW2COL`-based column reads: `void matrix_read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)`
 * `DIRECT_PINS`-based reads: `void matrix_read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)`
   * These three functions need to perform the low-level retrieval of matrix state of relevant input pins, based on the matrix type. Only one of the functions should be implemented, if needed. By default this will iterate through `MATRIX_ROW_PINS` and `MATRIX_COL_PINS`, configuring the inputs and outputs based on whether or not the keyboard is set up for `ROW2COL`, `COL2ROW`, or `DIRECT_PINS`. Should the keyboard designer override this function, no manipulation of matrix GPIO pin state will occur within QMK itself, instead deferring to the keyboard's override.
 
@@ -214,11 +214,11 @@ This is controlled by two functions: `suspend_power_down_*` and `suspend_wakeup_
 
 ```c
 void suspend_power_down_user(void) {
-    rgb_matrix_set_suspend_state(true);
+    // code will run multiple times while keyboard is suspended
 }
 
 void suspend_wakeup_init_user(void) {
-    rgb_matrix_set_suspend_state(false);
+    // code will run on keyboard wakeup
 }
 ```
 

docs/driver_installation_zadig.md

@@ -68,31 +68,31 @@ This is a list of known bootloader devices and their USB vendor and product IDs,
 
 The device name here is the name that appears in Zadig, and may not be what the Device Manager or QMK Toolbox displays.
 
-|Bootloader   |Device Name                   |VID/PID       |Driver |
-|-------------|------------------------------|--------------|-------|
-|`atmel-dfu`  |ATmega16u2 DFU                |`03EB:2FEF`   |libusb0|
-|`atmel-dfu`  |ATmega32U2 DFU                |`03EB:2FF0`   |libusb0|
-|`atmel-dfu`  |ATm16U4 DFU V1.0.2            |`03EB:2FF3`   |libusb0|
-|`atmel-dfu`  |ATm32U4DFU                    |`03EB:2FF4`   |libusb0|
-|`atmel-dfu`  |*none* (AT90USB64)            |`03EB:2FF9`   |libusb0|
-|`atmel-dfu`  |AT90USB128 DFU                |`03EB:2FFB`   |libusb0|
-|`qmk-dfu`    |(keyboard name) Bootloader    |As `atmel-dfu`|libusb0|
-|`halfkay`    |*none*                        |`16C0:0478`   |HidUsb |
-|`caterina`   |Pro Micro 3.3V                |`1B4F:9203`   |usbser |
-|`caterina`   |Pro Micro 5V                  |`1B4F:9205`   |usbser |
-|`caterina`   |LilyPadUSB                    |`1B4F:9207`   |usbser |
-|`caterina`   |Pololu A-Star 32U4 Bootloader |`1FFB:0101`   |usbser |
-|`caterina`   |Arduino Leonardo              |`2341:0036`   |usbser |
-|`caterina`   |Arduino Micro                 |`2341:0037`   |usbser |
-|`caterina`   |Adafruit Feather 32u4         |`239A:000C`   |usbser |
-|`caterina`   |Adafruit ItsyBitsy 32u4 3V    |`239A:000D`   |usbser |
-|`caterina`   |Adafruit ItsyBitsy 32u4 5V    |`239A:000E`   |usbser |
-|`caterina`   |Arduino Leonardo              |`2A03:0036`   |usbser |
-|`caterina`   |Arduino Micro                 |`2A03:0037`   |usbser |
-|`bootloadHID`|HIDBoot                       |`16C0:05DF`   |HidUsb |
-|`USBasp`     |USBasp                        |`16C0:05DC`   |libusbK|
-|`apm32-dfu`  |APM32 DFU ISP Mode            |`314B:0106`   |WinUSB |
-|`stm32-dfu`  |STM32 BOOTLOADER              |`0483:DF11`   |WinUSB |
-|`kiibohd`    |Kiibohd DFU Bootloader        |`1C11:B007`   |WinUSB |
-|`stm32duino` |Maple 003                     |`1EAF:0003`   |WinUSB |
-|`qmk-hid`    |(keyboard name) Bootloader    |`03EB:2067`   |HidUsb |
+|Bootloader    |Device Name                   |VID/PID       |Driver |
+|--------------|------------------------------|--------------|-------|
+|`atmel-dfu`   |ATmega16u2 DFU                |`03EB:2FEF`   |libusb0|
+|`atmel-dfu`   |ATmega32U2 DFU                |`03EB:2FF0`   |libusb0|
+|`atmel-dfu`   |ATm16U4 DFU V1.0.2            |`03EB:2FF3`   |libusb0|
+|`atmel-dfu`   |ATm32U4DFU                    |`03EB:2FF4`   |libusb0|
+|`atmel-dfu`   |*none* (AT90USB64)            |`03EB:2FF9`   |libusb0|
+|`atmel-dfu`   |AT90USB128 DFU                |`03EB:2FFB`   |libusb0|
+|`qmk-dfu`     |(keyboard name) Bootloader    |As `atmel-dfu`|libusb0|
+|`halfkay`     |*none*                        |`16C0:0478`   |HidUsb |
+|`caterina`    |Pro Micro 3.3V                |`1B4F:9203`   |usbser |
+|`caterina`    |Pro Micro 5V                  |`1B4F:9205`   |usbser |
+|`caterina`    |LilyPadUSB                    |`1B4F:9207`   |usbser |
+|`caterina`    |Pololu A-Star 32U4 Bootloader |`1FFB:0101`   |usbser |
+|`caterina`    |Arduino Leonardo              |`2341:0036`   |usbser |
+|`caterina`    |Arduino Micro                 |`2341:0037`   |usbser |
+|`caterina`    |Adafruit Feather 32u4         |`239A:000C`   |usbser |
+|`caterina`    |Adafruit ItsyBitsy 32u4 3V    |`239A:000D`   |usbser |
+|`caterina`    |Adafruit ItsyBitsy 32u4 5V    |`239A:000E`   |usbser |
+|`caterina`    |Arduino Leonardo              |`2A03:0036`   |usbser |
+|`caterina`    |Arduino Micro                 |`2A03:0037`   |usbser |
+|`bootloadhid` |HIDBoot                       |`16C0:05DF`   |HidUsb |
+|`usbasploader`|USBasp                        |`16C0:05DC`   |libusbK|
+|`apm32-dfu`   |APM32 DFU ISP Mode            |`314B:0106`   |WinUSB |
+|`stm32-dfu`   |STM32 BOOTLOADER              |`0483:DF11`   |WinUSB |
+|`kiibohd`     |Kiibohd DFU Bootloader        |`1C11:B007`   |WinUSB |
+|`stm32duino`  |Maple 003                     |`1EAF:0003`   |WinUSB |
+|`qmk-hid`     |(keyboard name) Bootloader    |`03EB:2067`   |HidUsb |

docs/feature_encoders.md

@@ -81,7 +81,7 @@ bool encoder_update_user(uint8_t index, bool clockwise) {
             tap_code(KC_UP);
         }
     }
-    return true;
+    return false;
 }
 ```
 

docs/feature_haptic_feedback.md

@@ -168,10 +168,16 @@ This mode sets continuous haptic feedback with the option to increase or decreas
 The Haptic Exclusion is implemented as `__attribute__((weak)) bool get_haptic_enabled_key(uint16_t keycode, keyrecord_t *record)` in haptic.c. This allows a re-definition at the required level with the specific requirement / exclusion.
 
 ### NO_HAPTIC_MOD
-With the entry of `#define NO_HAPTIC_MOD` in config.h, modifiers from Left Control to Right GUI will not trigger a feedback. This also includes modifiers in a Mod Tap configuration.
+With the entry of `#define NO_HAPTIC_MOD` in config.h, the following keys will not trigger feedback:
+
+* Usual modifier keys such as Control/Shift/Alt/Gui (For example `KC_LCTRL`)
+* `MO()` momentary keys. See also [Layers](feature_layers.md).
+* `LT()` layer tap keys, when held to activate a layer. However when tapped, and the key is quickly released, and sends a keycode, haptic feedback is still triggered.
+* `TT()` layer tap toggle keys, when held to activate a layer. However when tapped `TAPPING_TOGGLE` times to permanently toggle the layer, on the last tap haptic feedback is still triggered.
+* `MT()` mod tap keys, when held to keep a usual modifier key pressed. However when tapped, and the key is quickly released, and sends a keycode, haptic feedback is still triggered. See also [Mod-Tap](mod_tap.md).
 
 ### NO_HAPTIC_FN
-With the entry of `#define NO_HAPTIC_FN` in config.h, layer keys will not rigger a feedback.
+With the entry of `#define NO_HAPTIC_FN` in config.h, deprecated `fn_actions` type function keys will not trigger a feedback.
 
 ### NO_HAPTIC_ALPHA
 With the entry of `#define NO_HAPTIC_ALPHA` in config.h, none of the alpha keys (A ... Z) will trigger a feedback.

docs/feature_led_indicators.md

@@ -1,6 +1,6 @@
 # LED Indicators
 
-?>  Currently, this feature is not supported for split keyboards
+?> This feature requires additional configuration to work on both halves of a split keyboard see [Data sync options](feature_split_keyboard.md#data-sync-options)
 
 QMK provides methods to read 5 of the LEDs defined in the HID spec:
 

docs/feature_led_matrix.md

@@ -164,26 +164,26 @@ You can disable a single effect by defining `DISABLE_[EFFECT_NAME]` in your `con
 
 |Define                                                 |Description                                    |
 |-------------------------------------------------------|-----------------------------------------------|
-|`#define ENABLE_LED_MATRIX_ALPHAS_MODS`                |Enables `LED_MATRIX_ALPHAS_MODS`              |
-|`#define ENABLE_LED_MATRIX_BREATHING`                  |Enables `LED_MATRIX_BREATHING`                |
-|`#define ENABLE_LED_MATRIX_BAND`                       |Enables `LED_MATRIX_BAND`                     |
-|`#define ENABLE_LED_MATRIX_BAND_PINWHEEL`              |Enables `LED_MATRIX_BAND_PINWHEEL`            |
-|`#define ENABLE_LED_MATRIX_BAND_SPIRAL`                |Enables `LED_MATRIX_BAND_SPIRAL`              |
-|`#define ENABLE_LED_MATRIX_CYCLE_LEFT_RIGHT`           |Enables `LED_MATRIX_CYCLE_LEFT_RIGHT`         |
-|`#define ENABLE_LED_MATRIX_CYCLE_UP_DOWN`              |Enables `LED_MATRIX_CYCLE_UP_DOWN`            |
-|`#define ENABLE_LED_MATRIX_CYCLE_OUT_IN`               |Enables `LED_MATRIX_CYCLE_OUT_IN`             |
-|`#define ENABLE_LED_MATRIX_DUAL_BEACON`                |Enables `LED_MATRIX_DUAL_BEACON`              |
-|`#define ENABLE_LED_MATRIX_SOLID_REACTIVE_SIMPLE`      |Enables `LED_MATRIX_SOLID_REACTIVE_SIMPLE`    |
-|`#define ENABLE_LED_MATRIX_SOLID_REACTIVE_WIDE`        |Enables `LED_MATRIX_SOLID_REACTIVE_WIDE`      |
-|`#define ENABLE_LED_MATRIX_SOLID_REACTIVE_MULTIWIDE`   |Enables `LED_MATRIX_SOLID_REACTIVE_MULTIWIDE` |
-|`#define ENABLE_LED_MATRIX_SOLID_REACTIVE_CROSS`       |Enables `LED_MATRIX_SOLID_REACTIVE_CROSS`     |
-|`#define ENABLE_LED_MATRIX_SOLID_REACTIVE_MULTICROSS`  |Enables `LED_MATRIX_SOLID_REACTIVE_MULTICROSS`|
-|`#define ENABLE_LED_MATRIX_SOLID_REACTIVE_NEXUS`       |Enables `LED_MATRIX_SOLID_REACTIVE_NEXUS`     |
-|`#define ENABLE_LED_MATRIX_SOLID_REACTIVE_MULTINEXUS`  |Enables `LED_MATRIX_SOLID_REACTIVE_MULTINEXUS`|
-|`#define ENABLE_LED_MATRIX_SOLID_SPLASH`               |Enables `LED_MATRIX_SOLID_SPLASH`             |
-|`#define ENABLE_LED_MATRIX_SOLID_MULTISPLASH`          |Enables `LED_MATRIX_SOLID_MULTISPLASH`        |
-|`#define ENABLE_LED_MATRIX_WAVE_LEFT_RIGHT`            |Enables `LED_MATRIX_WAVE_LEFT_RIGHT`          |
-|`#define ENABLE_LED_MATRIX_WAVE_UP_DOWN`               |Enables `LED_MATRIX_WAVE_UP_DOWN`             |
+|`#define DISABLE_LED_MATRIX_ALPHAS_MODS`               |Disables `LED_MATRIX_ALPHAS_MODS`              |
+|`#define DISABLE_LED_MATRIX_BREATHING`                 |Disables `LED_MATRIX_BREATHING`                |
+|`#define DISABLE_LED_MATRIX_BAND`                      |Disables `LED_MATRIX_BAND`                     |
+|`#define DISABLE_LED_MATRIX_BAND_PINWHEEL`             |Disables `LED_MATRIX_BAND_PINWHEEL`            |
+|`#define DISABLE_LED_MATRIX_BAND_SPIRAL`               |Disables `LED_MATRIX_BAND_SPIRAL`              |
+|`#define DISABLE_LED_MATRIX_CYCLE_LEFT_RIGHT`          |Disables `LED_MATRIX_CYCLE_LEFT_RIGHT`         |
+|`#define DISABLE_LED_MATRIX_CYCLE_UP_DOWN`             |Disables `LED_MATRIX_CYCLE_UP_DOWN`            |
+|`#define DISABLE_LED_MATRIX_CYCLE_OUT_IN`              |Disables `LED_MATRIX_CYCLE_OUT_IN`             |
+|`#define DISABLE_LED_MATRIX_DUAL_BEACON`               |Disables `LED_MATRIX_DUAL_BEACON`              |
+|`#define DISABLE_LED_MATRIX_SOLID_REACTIVE_SIMPLE`     |Disables `LED_MATRIX_SOLID_REACTIVE_SIMPLE`    |
+|`#define DISABLE_LED_MATRIX_SOLID_REACTIVE_WIDE`       |Disables `LED_MATRIX_SOLID_REACTIVE_WIDE`      |
+|`#define DISABLE_LED_MATRIX_SOLID_REACTIVE_MULTIWIDE`  |Disables `LED_MATRIX_SOLID_REACTIVE_MULTIWIDE` |
+|`#define DISABLE_LED_MATRIX_SOLID_REACTIVE_CROSS`      |Disables `LED_MATRIX_SOLID_REACTIVE_CROSS`     |
+|`#define DISABLE_LED_MATRIX_SOLID_REACTIVE_MULTICROSS` |Disables `LED_MATRIX_SOLID_REACTIVE_MULTICROSS`|
+|`#define DISABLE_LED_MATRIX_SOLID_REACTIVE_NEXUS`      |Disables `LED_MATRIX_SOLID_REACTIVE_NEXUS`     |
+|`#define DISABLE_LED_MATRIX_SOLID_REACTIVE_MULTINEXUS` |Disables `LED_MATRIX_SOLID_REACTIVE_MULTINEXUS`|
+|`#define DISABLE_LED_MATRIX_SOLID_SPLASH`              |Disables `LED_MATRIX_SOLID_SPLASH`             |
+|`#define DISABLE_LED_MATRIX_SOLID_MULTISPLASH`         |Disables `LED_MATRIX_SOLID_MULTISPLASH`        |
+|`#define DISABLE_LED_MATRIX_WAVE_LEFT_RIGHT`           |Disables `LED_MATRIX_WAVE_LEFT_RIGHT`          |
+|`#define DISABLE_LED_MATRIX_WAVE_UP_DOWN`              |Disables `LED_MATRIX_WAVE_UP_DOWN`             |
 
 ## Custom LED Matrix Effects :id=custom-led-matrix-effects
 
@@ -244,14 +244,7 @@ static bool my_cool_effect2(effect_params_t* params) {
 #endif // LED_MATRIX_CUSTOM_EFFECT_IMPLS
 ```
 
-For inspiration and examples, check out the built-in effects under `quantum/led_matrix_animations/`
-
-
-
-
-
-
-
+For inspiration and examples, check out the built-in effects under `quantum/led_matrix/animations/`.
 
 
 ## Additional `config.h` Options :id=additional-configh-options

docs/feature_oled_driver.md

@@ -18,7 +18,7 @@ Hardware configurations using Arm-based microcontrollers or different sizes of O
 
 ## Usage
 
-To enable the OLED feature, there are three steps. First, when compiling your keyboard, you'll need to add the following to your `rules.mk`:
+To enable the OLED feature, there are two steps. First, when compiling your keyboard, you'll need to add the following to your `rules.mk`:
 
 ```make
 OLED_ENABLE = yes

docs/feature_rgb_matrix.md

@@ -448,46 +448,46 @@ You can disable a single effect by defining `DISABLE_[EFFECT_NAME]` in your `con
 
 |Define                                                 |Description                                    |
 |-------------------------------------------------------|-----------------------------------------------|
-|`#define ENABLE_RGB_MATRIX_ALPHAS_MODS`               |Enables `RGB_MATRIX_ALPHAS_MODS`              |
-|`#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN`          |Enables `RGB_MATRIX_GRADIENT_UP_DOWN`         |
-|`#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT`       |Enables `MATRIX_GRADIENT_LEFT_RIGHT`          |
-|`#define ENABLE_RGB_MATRIX_BREATHING`                 |Enables `RGB_MATRIX_BREATHING`                |
-|`#define ENABLE_RGB_MATRIX_BAND_SAT`                  |Enables `RGB_MATRIX_BAND_SAT`                 |
-|`#define ENABLE_RGB_MATRIX_BAND_VAL`                  |Enables `RGB_MATRIX_BAND_VAL`                 |
-|`#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT`         |Enables `RGB_MATRIX_BAND_PINWHEEL_SAT`        |
-|`#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL`         |Enables `RGB_MATRIX_BAND_PINWHEEL_VAL`        |
-|`#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT`           |Enables `RGB_MATRIX_BAND_SPIRAL_SAT`          |
-|`#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL`           |Enables `RGB_MATRIX_BAND_SPIRAL_VAL`          |
-|`#define ENABLE_RGB_MATRIX_CYCLE_ALL`                 |Enables `RGB_MATRIX_CYCLE_ALL`                |
-|`#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT`          |Enables `RGB_MATRIX_CYCLE_LEFT_RIGHT`         |
-|`#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN`             |Enables `RGB_MATRIX_CYCLE_UP_DOWN`            |
-|`#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON`    |Enables `RGB_MATRIX_RAINBOW_MOVING_CHEVRON`   |
-|`#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN`              |Enables `RGB_MATRIX_CYCLE_OUT_IN`             |
-|`#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL`         |Enables `RGB_MATRIX_CYCLE_OUT_IN_DUAL`        |
-|`#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL`            |Enables `RGB_MATRIX_CYCLE_PINWHEEL`           |
-|`#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL`              |Enables `RGB_MATRIX_CYCLE_SPIRAL`             |
-|`#define ENABLE_RGB_MATRIX_DUAL_BEACON`               |Enables `RGB_MATRIX_DUAL_BEACON`              |
-|`#define ENABLE_RGB_MATRIX_RAINBOW_BEACON`            |Enables `RGB_MATRIX_RAINBOW_BEACON`           |
-|`#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS`         |Enables `RGB_MATRIX_RAINBOW_PINWHEELS`        |
-|`#define ENABLE_RGB_MATRIX_RAINDROPS`                 |Enables `RGB_MATRIX_RAINDROPS`                |
-|`#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS`       |Enables `RGB_MATRIX_JELLYBEAN_RAINDROPS`      |
-|`#define ENABLE_RGB_MATRIX_HUE_BREATHING`             |Enables `RGB_MATRIX_HUE_BREATHING`            |
-|`#define ENABLE_RGB_MATRIX_HUE_PENDULUM`              |Enables `RGB_MATRIX_HUE_PENDULUM`             |
-|`#define ENABLE_RGB_MATRIX_HUE_WAVE `                 |Enables `RGB_MATRIX_HUE_WAVE `                |
-|`#define ENABLE_RGB_MATRIX_TYPING_HEATMAP`            |Enables `RGB_MATRIX_TYPING_HEATMAP`           |
-|`#define ENABLE_RGB_MATRIX_DIGITAL_RAIN`              |Enables `RGB_MATRIX_DIGITAL_RAIN`             |
-|`#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE`     |Enables `RGB_MATRIX_SOLID_REACTIVE_SIMPLE`    |
-|`#define ENABLE_RGB_MATRIX_SOLID_REACTIVE`            |Enables `RGB_MATRIX_SOLID_REACTIVE`           |
-|`#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE`       |Enables `RGB_MATRIX_SOLID_REACTIVE_WIDE`      |
-|`#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE`  |Enables `RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE` |
-|`#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS`      |Enables `RGB_MATRIX_SOLID_REACTIVE_CROSS`     |
-|`#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS` |Enables `RGB_MATRIX_SOLID_REACTIVE_MULTICROSS`|
-|`#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS`      |Enables `RGB_MATRIX_SOLID_REACTIVE_NEXUS`     |
-|`#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS` |Enables `RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS`|
-|`#define ENABLE_RGB_MATRIX_SPLASH`                    |Enables `RGB_MATRIX_SPLASH`                   |
-|`#define ENABLE_RGB_MATRIX_MULTISPLASH`               |Enables `RGB_MATRIX_MULTISPLASH`              |
-|`#define ENABLE_RGB_MATRIX_SOLID_SPLASH`              |Enables `RGB_MATRIX_SOLID_SPLASH`             |
-|`#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH`         |Enables `RGB_MATRIX_SOLID_MULTISPLASH`        |
+|`#define DISABLE_RGB_MATRIX_ALPHAS_MODS`               |Disables `RGB_MATRIX_ALPHAS_MODS`              |
+|`#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN`          |Disables `RGB_MATRIX_GRADIENT_UP_DOWN`         |
+|`#define DISABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT`       |Disables `MATRIX_GRADIENT_LEFT_RIGHT`          |
+|`#define DISABLE_RGB_MATRIX_BREATHING`                 |Disables `RGB_MATRIX_BREATHING`                |
+|`#define DISABLE_RGB_MATRIX_BAND_SAT`                  |Disables `RGB_MATRIX_BAND_SAT`                 |
+|`#define DISABLE_RGB_MATRIX_BAND_VAL`                  |Disables `RGB_MATRIX_BAND_VAL`                 |
+|`#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT`         |Disables `RGB_MATRIX_BAND_PINWHEEL_SAT`        |
+|`#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL`         |Disables `RGB_MATRIX_BAND_PINWHEEL_VAL`        |
+|`#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT`           |Disables `RGB_MATRIX_BAND_SPIRAL_SAT`          |
+|`#define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL`           |Disables `RGB_MATRIX_BAND_SPIRAL_VAL`          |
+|`#define DISABLE_RGB_MATRIX_CYCLE_ALL`                 |Disables `RGB_MATRIX_CYCLE_ALL`                |
+|`#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT`          |Disables `RGB_MATRIX_CYCLE_LEFT_RIGHT`         |
+|`#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN`             |Disables `RGB_MATRIX_CYCLE_UP_DOWN`            |
+|`#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON`    |Disables `RGB_MATRIX_RAINBOW_MOVING_CHEVRON`   |
+|`#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN`              |Disables `RGB_MATRIX_CYCLE_OUT_IN`             |
+|`#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL`         |Disables `RGB_MATRIX_CYCLE_OUT_IN_DUAL`        |
+|`#define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL`            |Disables `RGB_MATRIX_CYCLE_PINWHEEL`           |
+|`#define DISABLE_RGB_MATRIX_CYCLE_SPIRAL`              |Disables `RGB_MATRIX_CYCLE_SPIRAL`             |
+|`#define DISABLE_RGB_MATRIX_DUAL_BEACON`               |Disables `RGB_MATRIX_DUAL_BEACON`              |
+|`#define DISABLE_RGB_MATRIX_RAINBOW_BEACON`            |Disables `RGB_MATRIX_RAINBOW_BEACON`           |
+|`#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS`         |Disables `RGB_MATRIX_RAINBOW_PINWHEELS`        |
+|`#define DISABLE_RGB_MATRIX_RAINDROPS`                 |Disables `RGB_MATRIX_RAINDROPS`                |
+|`#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS`       |Disables `RGB_MATRIX_JELLYBEAN_RAINDROPS`      |
+|`#define DISABLE_RGB_MATRIX_HUE_BREATHING`             |Disables `RGB_MATRIX_HUE_BREATHING`            |
+|`#define DISABLE_RGB_MATRIX_HUE_PENDULUM`              |Disables `RGB_MATRIX_HUE_PENDULUM`             |
+|`#define DISABLE_RGB_MATRIX_HUE_WAVE `                 |Disables `RGB_MATRIX_HUE_WAVE `                |
+|`#define DISABLE_RGB_MATRIX_TYPING_HEATMAP`            |Disables `RGB_MATRIX_TYPING_HEATMAP`           |
+|`#define DISABLE_RGB_MATRIX_DIGITAL_RAIN`              |Disables `RGB_MATRIX_DIGITAL_RAIN`             |
+|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE`     |Disables `RGB_MATRIX_SOLID_REACTIVE_SIMPLE`    |
+|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE`            |Disables `RGB_MATRIX_SOLID_REACTIVE`           |
+|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE`       |Disables `RGB_MATRIX_SOLID_REACTIVE_WIDE`      |
+|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE`  |Disables `RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE` |
+|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS`      |Disables `RGB_MATRIX_SOLID_REACTIVE_CROSS`     |
+|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS` |Disables `RGB_MATRIX_SOLID_REACTIVE_MULTICROSS`|
+|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS`      |Disables `RGB_MATRIX_SOLID_REACTIVE_NEXUS`     |
+|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS` |Disables `RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS`|
+|`#define DISABLE_RGB_MATRIX_SPLASH`                    |Disables `RGB_MATRIX_SPLASH`                   |
+|`#define DISABLE_RGB_MATRIX_MULTISPLASH`               |Disables `RGB_MATRIX_MULTISPLASH`              |
+|`#define DISABLE_RGB_MATRIX_SOLID_SPLASH`              |Disables `RGB_MATRIX_SOLID_SPLASH`             |
+|`#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH`         |Disables `RGB_MATRIX_SOLID_MULTISPLASH`        |
 
 ### RGB Matrix Effect Typing Heatmap :id=rgb-matrix-effect-typing-heatmap
 
@@ -562,7 +562,7 @@ static bool my_cool_effect2(effect_params_t* params) {
 #endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS
 ```
 
-For inspiration and examples, check out the built-in effects under `quantum/rgb_matrix_animations/`
+For inspiration and examples, check out the built-in effects under `quantum/rgb_matrix/animations/`.
 
 
 ## Colors :id=colors

docs/feature_split_keyboard.md

@@ -219,47 +219,52 @@ One communication attempt will be allowed everytime this amount of time has pass
 
 Set to 0 to disable this throttling of communications while disconnected. This can save you a couple of bytes of firmware size.
 
+
+### Data Sync Options
+
+The following sync options add overhead to the split communication protocol and may negatively impact the matrix scan speed when enabled. These can be enabled by adding the chosen option(s) to your `config.h` file.
+
 ```c
 #define SPLIT_TRANSPORT_MIRROR
 ```
 
-This mirrors the master side matrix to the slave side for features that react or require knowledge of master side key presses on the slave side. The purpose of this feature is to support cosmetic use of key events (e.g. RGB reacting to keypresses). This adds overhead to the split communication protocol and may negatively impact the matrix scan speed when enabled. 
+This mirrors the master side matrix to the slave side for features that react or require knowledge of master side key presses on the slave side. The purpose of this feature is to support cosmetic use of key events (e.g. RGB reacting to keypresses).
 
 ```c
 #define SPLIT_LAYER_STATE_ENABLE
 ```
 
-This enables syncing of the layer state between both halves of the split keyboard. The main purpose of this feature is to enable support for use of things like OLED display of the currently active layer. This adds overhead to the split communication protocol and may negatively impact the matrix scan speed when enabled. 
+This enables syncing of the layer state between both halves of the split keyboard. The main purpose of this feature is to enable support for use of things like OLED display of the currently active layer.
 
 ```c
 #define SPLIT_LED_STATE_ENABLE
 ```
 
-This enables syncing of the Host LED status (caps lock, num lock, etc) between both halves of the split keyboard. The main purpose of this feature is to enable support for use of things like OLED display of the Host LED status. This adds overhead to the split communication protocol and may negatively impact the matrix scan speed when enabled. 
+This enables syncing of the Host LED status (caps lock, num lock, etc) between both halves of the split keyboard. The main purpose of this feature is to enable support for use of things like OLED display of the Host LED status.
 
 ```c
 #define SPLIT_MODS_ENABLE
 ```
 
-This enables transmitting modifier state (normal, weak and oneshot) to the non primary side of the split keyboard. The purpose of this feature is to support cosmetic use of modifer state (e.g. displaying status on an OLED screen). This adds overhead to the split communication protocol and may negatively impact the matrix scan speed when enabled. 
+This enables transmitting modifier state (normal, weak and oneshot) to the non primary side of the split keyboard. The purpose of this feature is to support cosmetic use of modifer state (e.g. displaying status on an OLED screen).
 
 ```c
 #define SPLIT_WPM_ENABLE
 ```
 
-This enables transmitting the current WPM to the slave side of the split keyboard. The purpose of this feature is to support cosmetic use of WPM (e.g. displaying the current value on an OLED screen). This adds overhead to the split communication protocol and may negatively impact the matrix scan speed when enabled. 
+This enables transmitting the current WPM to the slave side of the split keyboard. The purpose of this feature is to support cosmetic use of WPM (e.g. displaying the current value on an OLED screen).
 
 ```c
 #define SPLIT_OLED_ENABLE
 ```
 
-This enables transmitting the current OLED on/off status to the slave side of the split keyboard. The purpose of this feature is to support state (on/off state only) syncing. This adds overhead to the split communication protocol and may negatively impact the matrix scan speed when enabled. 
+This enables transmitting the current OLED on/off status to the slave side of the split keyboard. The purpose of this feature is to support state (on/off state only) syncing.
 
 ```c
 #define SPLIT_ST7565_ENABLE
 ```
 
-This enables transmitting the current ST7565 on/off status to the slave side of the split keyboard. The purpose of this feature is to support state (on/off state only) syncing. This adds overhead to the split communication protocol and may negatively impact the matrix scan speed when enabled. 
+This enables transmitting the current ST7565 on/off status to the slave side of the split keyboard. The purpose of this feature is to support state (on/off state only) syncing.
 
 ### Custom data sync between sides :id=custom-data-sync
 

docs/flashing.md

@@ -127,7 +127,7 @@ To ensure compatibility with the USBasploader bootloader, make sure this block i
 
 ```make
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 ```
 
 Compatible flashers:
@@ -153,13 +153,13 @@ To ensure compatibility with the bootloadHID bootloader, make sure this block is
 
 ```make
 # Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
 ```
 
 Compatible flashers:
 
 * [QMK Toolbox](https://github.com/qmk/qmk_toolbox/releases) (recommended GUI)
-* [bootloadHID CLI](https://www.obdev.at/products/vusb/bootloadhid.html) / `:bootloadHID` target in QMK (recommended command line)
+* [bootloadHID CLI](https://www.obdev.at/products/vusb/bootloadhid.html) / `:bootloadhid` target in QMK (recommended command line)
 * [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash)
 
 Flashing sequence:

docs/flashing_bootloadhid.md

@@ -15,9 +15,9 @@ General flashing sequence:
 
 ?> Using the QMK installation script, detailed [here](newbs_getting_started.md), the required bootloadHID tools should be automatically installed.
 
-To flash via the command line, use the target `:bootloadHID` by executing the following command:
+To flash via the command line, use the target `:bootloadhid` by executing the following command:
 
-    make <keyboard>:<keymap>:bootloadHID
+    make <keyboard>:<keymap>:bootloadhid
 
 ## GUI Flashing
 

docs/getting_started_make_guide.md

@@ -14,7 +14,7 @@ The full syntax of the `make` command is `<keyboard_folder>:<keymap>:<target>`,
 The `<target>` means the following
 * If no target is given, then it's the same as `all` below
 * `all` compiles as many keyboard/revision/keymap combinations as specified. For example, `make planck/rev4:default` will generate a single .hex, while `make planck/rev4:all` will generate a hex for every keymap available to the planck.
-* `flash`, `dfu`, `teensy`, `avrdude`, `dfu-util`, or `bootloadHID` compile and upload the firmware to the keyboard. If the compilation fails, then nothing will be uploaded. The programmer to use depends on the keyboard. For most keyboards it's `dfu`, but for ChibiOS keyboards you should use `dfu-util`, and `teensy` for standard Teensys. To find out which command you should use for your keyboard, check the keyboard specific readme. 
+* `flash`, `dfu`, `teensy`, `avrdude`, `dfu-util`, or `bootloadhid` compile and upload the firmware to the keyboard. If the compilation fails, then nothing will be uploaded. The programmer to use depends on the keyboard. For most keyboards it's `dfu`, but for ChibiOS keyboards you should use `dfu-util`, and `teensy` for standard Teensys. To find out which command you should use for your keyboard, check the keyboard specific readme. 
   Visit the [Flashing Firmware](flashing.md) guide for more details of the available bootloaders.
   * **Note**: some operating systems need privileged access for these commands to work. This means that you may need to setup [`udev rules`](faq_build.md#linux-udev-rules) to access these without root access, or to run the command with root access (`sudo make planck/rev4:default:flash`).
 * `clean`, cleans the build output folders to make sure that everything is built from scratch. Run this before normal compilation if you have some unexplainable problems.

docs/ja/compatible_microcontrollers.md

@@ -1,8 +1,8 @@
 # 互換性のあるマイクロコントローラ
 
 <!---
-  original document: 0.9.19:docs/compatible_microcontrollers.md
-  git diff 0.9.19 HEAD -- docs/compatible_microcontrollers.md | cat
+  original document: 0.14.14:docs/compatible_microcontrollers.md
+  git diff 0.14.14 HEAD -- docs/compatible_microcontrollers.md | cat
 -->
 
 QMK は十分な容量のフラッシュメモリを備えた USB 対応 AVR または ARM マイクロコントローラで実行されます - 一般的に 32kB 以上ですが、ほとんどの機能を無効にすると*ほんの* 16kB に詰め込むことができます。

docs/ja/config_options.md

@@ -141,7 +141,7 @@ QMK での全ての利用可能な設定にはデフォルトがあります。
 * `#define STRICT_LAYER_RELEASE`
   * キーリリースがどのレイヤーから来たのかを覚えるのではなく、現在のレイヤースタックを使って強制的に評価されるようにします (高度なケースに使われます)
 
-## 設定可能な挙動
+## 設定可能な挙動 :id=behaviors-that-can-be-configured
 
 * `#define TAPPING_TERM 200`
   * タップがホールドになるまでの時間。500以上に設定された場合、タップ期間中にタップされたキーもホールドになります。(訳注: PERMISSIVE_HOLDも参照)

docs/ja/custom_quantum_functions.md

@@ -211,11 +211,11 @@ void keyboard_post_init_user(void) {
 
 ```c
 void suspend_power_down_user(void) {
-    rgb_matrix_set_suspend_state(true);
+    // code will run multiple times while keyboard is suspended
 }
 
 void suspend_wakeup_init_user(void) {
-    rgb_matrix_set_suspend_state(false);
+    // code will run on keyboard wakeup
 }
 ```
 

docs/ja/feature_advanced_keycodes.md

@@ -1,30 +1,33 @@
 # 修飾キー :id=modifier-keys
 
 <!---
-  original document: 0.12.29:docs/feature_advanced_keycodes.md
-  git diff 0.12.29 HEAD -- docs/feature_advanced_keycodes.md | cat
+  original document: 0.14.6:docs/feature_advanced_keycodes.md
+  git diff 0.14.6 HEAD -- docs/feature_advanced_keycodes.md | cat
 -->
 
 以下のようにキーコードとモディファイアを組み合わせることができます。押すと、モディファイアのキーダウンイベントが送信され、次に `kc` のキーダウンイベントが送信されます。放すと、`kc` のキーアップイベントが送信され、次にモディファイアのキーアップイベントが送信されます。
 
-| キー       | エイリアス                      | 説明                                                                |
-| ---------- | ------------------------------- | ------------------------------------------------------------------- |
-| `LCTL(kc)` | `C(kc)`                         | 左 Control を押しながら `kc` を押します。                           |
-| `LSFT(kc)` | `S(kc)`                         | 左 Shift を押しながら `kc` を押します。                             |
-| `LALT(kc)` | `A(kc)`, `LOPT(kc)`             | 左 Alt を押しながら `kc`を押します。                                |
-| `LGUI(kc)` | `G(kc)`, `LCMD(kc)`, `LWIN(kc)` | 左 GUI を押しながら `kc` を押します。                               |
-| `RCTL(kc)` |                                 | 右 Control を押しながら `kc` を押します。                           |
-| `RSFT(kc)` |                                 | 右 Shift を押しながら `kc` を押します。                             |
-| `RALT(kc)` | `ROPT(kc)`, `ALGR(kc)`          | 右 Alt を押しながら `kc` を押します。                               |
-| `RGUI(kc)` | `RCMD(kc)`, `LWIN(kc)`          | 右 GUI を押しながら `kc` を押します。                               |
-| `SGUI(kc)` | `SCMD(kc)`, `SWIN(kc)`          | 左 Shift と左 GUI を押しながら `kc` を押します。                    |
-| `LCA(kc)`  |                                 | 左 Control と左 Alt を押しながら `kc` を押します。                  |
-| `LSA(kc)`  |                                 | 左 Shift と左 Alt を押しながら `kc` を押します。                    |
-| `RSA(kc)`  | `SAGR(kc)`                      | 右 Shift と右 Alt (AltGr) を押しながら `kc` を押します。            |
-| `RCS(kc)`  |                                 | 右 Control と右 Shift を押しながら `kc` を押します。                |
-| `LCAG(kc)` |                                 | 左 Control、左 Alt、左 GUI を押しながら `kc` を押します。           |
-| `MEH(kc)`  |                                 | 左 Control、左 Shift、左 Alt を押しながら `kc` を押します。         |
-| `HYPR(kc)` |                                 | 左 Control、左 Shift、左 Alt、左 GUI を押しながら `kc` を押します。 |
+| キー       | エイリアス                         | 説明                                                                |
+| ---------- | ---------------------------------- | ------------------------------------------------------------------- |
+| `LCTL(kc)` | `C(kc)`                            | 左 Control を押しながら `kc` を押します。                           |
+| `LSFT(kc)` | `S(kc)`                            | 左 Shift を押しながら `kc` を押します。                             |
+| `LALT(kc)` | `A(kc)`, `LOPT(kc)`                | 左 Alt を押しながら `kc`を押します。                                |
+| `LGUI(kc)` | `G(kc)`, `LCMD(kc)`, `LWIN(kc)`    | 左 GUI を押しながら `kc` を押します。                               |
+| `RCTL(kc)` |                                    | 右 Control を押しながら `kc` を押します。                           |
+| `RSFT(kc)` |                                    | 右 Shift を押しながら `kc` を押します。                             |
+| `RALT(kc)` | `ROPT(kc)`, `ALGR(kc)`             | 右 Alt を押しながら `kc` を押します。                               |
+| `RGUI(kc)` | `RCMD(kc)`, `LWIN(kc)`             | 右 GUI を押しながら `kc` を押します。                               |
+| `LSG(kc)`  | `SGUI(kc)`, `SCMD(kc)`, `SWIN(kc)` | 左 Shift と左 GUI を押しながら `kc` を押します。                    |
+| `LAG(kc)`  |                                    | 左 Alt と左 GUI を押しながら `kc` を押します。                      |
+| `RSG(kc)`  |                                    | 右 Shift と右 GUI を押しながら `kc` を押します。                    |
+| `RAG(kc)`  |                                    | 右 Alt と右 GUI を押しながら `kc` を押します。                      |
+| `LCA(kc)`  |                                    | 左 Control と左 Alt を押しながら `kc` を押します。                  |
+| `LSA(kc)`  |                                    | 左 Shift と左 Alt を押しながら `kc` を押します。                    |
+| `RSA(kc)`  | `SAGR(kc)`                         | 右 Shift と右 Alt (AltGr) を押しながら `kc` を押します。            |
+| `RCS(kc)`  |                                    | 右 Control と右 Shift を押しながら `kc` を押します。                |
+| `LCAG(kc)` |                                    | 左 Control、左 Alt、左 GUI を押しながら `kc` を押します。           |
+| `MEH(kc)`  |                                    | 左 Control、左 Shift、左 Alt を押しながら `kc` を押します。         |
+| `HYPR(kc)` |                                    | 左 Control、左 Shift、左 Alt、左 GUI を押しながら `kc` を押します。 |
 
 また、それらを繋げることができます。例えば、`LCTL(LALT(KC_DEL))` または  `C(A(KC_DEL))` は1回のキー押下で Control+Alt+Delete を送信するキーを作成します。
 

docs/ja/feature_backlight.md

@@ -1,8 +1,8 @@
 # バックライト :id=backlighting
 
 <!---
-  original document: 0.10.33:docs/feature_backlight.md
-  git diff 0.10.33 HEAD -- docs/feature_backlight.md | cat
+  original document: 0.14.14:docs/feature_backlight.md
+  git diff 0.14.14 HEAD -- docs/feature_backlight.md | cat
 -->
 
 多くのキーボードは、キースイッチを貫通して配置されたり、キースイッチの下に配置された個々の LED によって、バックライトキーをサポートします。この機能は通常スイッチごとに単一の色しか使用できないため、[RGB アンダーグロー](ja/feature_rgblight.md)および [RGB マトリックス](ja/feature_rgb_matrix.md)機能のどちらとも異なりますが、キーボードに複数の異なる単一色の LED を取り付けることは当然可能です。
@@ -67,14 +67,17 @@ BACKLIGHT_DRIVER = software
 
 バックライトを設定するには、`config.h` の中で以下の `#define` をします:
 
-| 定義                  | デフォルト | 説明                                                                                        |
-| --------------------- | ---------- | ------------------------------------------------------------------------------------------- |
-| `BACKLIGHT_PIN`       | *定義なし* | LED を制御するピン                                                                          |
-| `BACKLIGHT_LEVELS`    | `3`        | 輝度のレベルの数 (オフを除いて最大 31)                                                      |
-| `BACKLIGHT_CAPS_LOCK` | *定義なし* | バックライトを使って Caps Lock のインジケータを有効にする (専用 LED の無いキーボードのため) |
-| `BACKLIGHT_BREATHING` | *定義なし* | サポートされる場合は、バックライトの明滅動作を有効にする                                    |
-| `BREATHING_PERIOD`    | `6`        | 各バックライトの "明滅" の長さ（秒）                                                        |
-| `BACKLIGHT_ON_STATE`  | `1`        | バックライトが "オン" の時のバックライトピンの状態 - high の場合は `1`、low の場合は `0`    |
+| 定義                          | デフォルト         | 説明                                                                                          |
+| ----------------------------- | ------------------ | --------------------------------------------------------------------------------------------- |
+| `BACKLIGHT_PIN`               | *定義なし*         | LED を制御するピン                                                                            |
+| `BACKLIGHT_LEVELS`            | `3`                | 輝度のレベルの数 (オフを除いて最大 31)                                                        |
+| `BACKLIGHT_CAPS_LOCK`         | *定義なし*         | バックライトを使って Caps Lock のインジケータを有効にする (専用 LED の無いキーボードのため)   |
+| `BACKLIGHT_BREATHING`         | *定義なし*         | サポートされる場合は、バックライトの明滅動作を有効にする                                      |
+| `BREATHING_PERIOD`            | `6`                | 各バックライトの "明滅" の長さ（秒）                                                          |
+| `BACKLIGHT_ON_STATE`          | `1`                | バックライトが "オン" の時のバックライトピンの状態 - high の場合は `1`、low の場合は `0`      |
+| `BACKLIGHT_LIMIT_VAL`         | `255`              | バックライトの最大デューティサイクル -- `255` で最大輝度になり、それ未満では最大値が減少する  |
+| `BACKLIGHT_DEFAULT_LEVEL`     | `BACKLIGHT_LEVELS` | EEPROM をクリアする時に使うデフォルトのバックライトレベル                                     |
+| `BACKLIGHT_DEFAULT_BREATHING` | *定義なし*         | EEPROM をクリアする時に、バックライトのブリージングを有効にするかどうか                       |
 
 独自のキーボードを設計しているわけではない限り、通常は `BACKLIGHT_PIN` または `BACKLIGHT_ON_STATE` を変更する必要はありません。
 
@@ -97,18 +100,18 @@ BACKLIGHT_DRIVER = pwm
 
 AVR ボードでは、QMK はどのドライバを使うかを以下の表に従って自動的に決定します:
 
-| バックライトピン | AT90USB64/128 | ATmega16/32U4 | ATmega16/32U2 | ATmega32A | ATmega328/P |
-| ---------------- | ------------- | ------------- | ------------- | --------- | ----------- |
-| `B1`             |               |               |               |           | Timer 1     |
-| `B2`             |               |               |               |           | Timer 1     |
-| `B5`             | Timer 1       | Timer 1       |               |           |             |
-| `B6`             | Timer 1       | Timer 1       |               |           |             |
-| `B7`             | Timer 1       | Timer 1       | Timer 1       |           |             |
-| `C4`             | Timer 3       |               |               |           |             |
-| `C5`             | Timer 3       |               | Timer 1       |           |             |
-| `C6`             | Timer 3       | Timer 3       | Timer 1       |           |             |
-| `D4`             |               |               |               | Timer 1   |             |
-| `D5`             |               |               |               | Timer 1   |             |
+| バックライトピン | AT90USB64/128 | AT90USB162 | ATmega16/32U4 | ATmega16/32U2 | ATmega32A | ATmega328/P |
+| ---------------- | ------------- | ---------- | ------------- | ------------- | --------- | ----------- |
+| `B1`             |               |            |               |               |           | Timer 1     |
+| `B2`             |               |            |               |               |           | Timer 1     |
+| `B5`             | Timer 1       |            | Timer 1       |               |           |             |
+| `B6`             | Timer 1       |            | Timer 1       |               |           |             |
+| `B7`             | Timer 1       | Timer 1    | Timer 1       | Timer 1       |           |             |
+| `C4`             | Timer 3       |            |               |               |           |             |
+| `C5`             | Timer 3       | Timer 1    |               | Timer 1       |           |             |
+| `C6`             | Timer 3       | Timer 1    | Timer 3       | Timer 1       |           |             |
+| `D4`             |               |            |               |               | Timer 1   |             |
+| `D5`             |               |            |               |               | Timer 1   |             |
 
 他の全てのピンはタイマー支援ソフトウェア PWM を使います。
 

docs/ja/feature_encoders.md

@@ -76,7 +76,7 @@ bool encoder_update_user(uint8_t index, bool clockwise) {
             tap_code(KC_UP);
         }
     }
-    return true;
+    return false;
 }
 ```
 

docs/ja/feature_leader_key.md

@@ -1,8 +1,8 @@
 # リーダーキー: 新しい種類のモディファイア
 
 <!---
-  original document: 0.10.33:docs/feature_leader_key.md
-  git diff 0.10.33 HEAD -- docs/feature_leader_key.md | cat
+  original document: 0.13.24:docs/feature_leader_key.md
+  git diff 0.13.24 HEAD -- docs/feature_leader_key.md | cat
 -->
 
 もしあなたが Vim を使ったことがある場合、リーダーキーは何であるかを知っています。そうでなければ、素晴らしい概念を発見しようとしています。:) 例えば、Alt+Shift+W を押す(3つのキーを同時に押す)代わりに、キーの_シーケンス_を押すことができたらどうでしょう？つまり、特別なモディファイア (リーダーキー)を押して、続けて W と C を押すと (単純にキーを高速に繋げます)、何かが起こります。
@@ -77,6 +77,19 @@ SEQ_THREE_KEYS(KC_C, KC_C, KC_C) {
 }
 ```
 
+## リーダーキーの無限タイムアウト
+
+リーダーキーが、シーケンスの残りのキーのような快適な場所にない場合があります。リーダーキーが右上の外側のキーの1つである場合、リーダーキーに届くように手の位置を変えなければならないことがあります。
+これにより、シーケンスの大部分をすばやく入力できたとしても、シーケンス全体を時間通りに入力するのが難しい場合があります。例えば、シーケンスが `Leader + asd` の場合、手をホーム行に置けば `asd` を素早く打つのは非常に簡単です。しかし、リーダーキーに届くようにホーム行から手を移動し、戻った後、時間内にシーケンスを開始することはできません。
+この状況が手に与えるストレスを取り除くために、リーダーキーだけに無限のタイムアウトを有効にすることができます。つまり、リーダーキーを押した後、シーケンスの残りを開始するまでの時間が無限になり、シーケンスの残りを快適に入力するための最適な位置に手を置くことができます。
+この無限のタイムアウトはリーダーキーにのみ影響するため、前述の `Leader + asd` の例では、`Leader` と `a` の間に無限の時間があります。ただし、シーケンスを開始すると、(グローバルまたはキーごとに)設定したタイムアウトは正常に機能します。
+このようにして、非常に短い `LEADER_TIMEOUT` を設定できますが、それでも手を置く時間は十分にあります。
+
+これを有効にするには、以下を `config.h` に配置します:
+```c
+#define LEADER_NO_TIMEOUT
+```
+
 ## 厳密なキー処理
 
 デフォルトでは、リーダーキー機能は、リーダーシーケンスの確認時に [`モッドタップ`](ja/mod_tap.md) および [`レイヤータップ`](ja/feature_layers.md#switching-and-toggling-layers) 機能からのキーコードをフィルターします。つまり、`LT(3, KC_A)` を使っている場合、`LT(3, KC_A)` ではなくシーケンスの `KC_A` として取り出され、新しいユーザにとってより期待される動作を提供します。

docs/ja/feature_led_indicators.md

@@ -25,7 +25,7 @@ LED の状態を `uint8_t` として提供する2つの非推奨の関数があ
 * `uint8_t led_set_kb(uint8_t usb_led)` と `_user(uint8_t usb_led)`
 * `uint8_t host_keyboard_leds()`
 
-## 設定オプション
+## 設定オプション :id=configuration-options
 
 インジケータを設定するには、`config.h` で以下の `#define` をします:
 

docs/ja/isp_flashing_guide.md

@@ -2,8 +2,8 @@
 
 <!---
   grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
-  original document: 0.9.46:docs/isp_flashing_guide.md
-  git diff 0.9.46 HEAD -- docs/isp_flashing_guide.md | cat
+  original document: 0.13.29:docs/isp_flashing_guide.md
+  git diff 0.13.29 HEAD -- docs/isp_flashing_guide.md | cat
 -->
 
 ISP 書き込み(ICSP 書き込みと呼ぶ場合もあります)とは、マイクロコントローラーを直接プログラミングするプロセスです。
@@ -52,6 +52,7 @@ QMK の ISP 書き込みの主な用途は、AVRベースのコントローラ
 
 * [SparkFun PocketAVR](https://www.sparkfun.com/products/9825) - (USB Tiny)
 * [USBtinyISP AVR Programmer Kit](https://www.adafruit.com/product/46) - (USB Tiny)
+* [USBasp](https://www.fischl.de/usbasp/) - (usbasp)
 * [Teensy 2.0](https://www.pjrc.com/store/teensy.html) - (avrisp)
 * [Pro Micro](https://www.sparkfun.com/products/12640)  - (avrisp)
 * [Bus Pirate](https://www.adafruit.com/product/237) - (buspirate)
@@ -77,8 +78,8 @@ Teensy と Pro Micro のコントローラを ISP プログラマとして使用
 
 QMK ツールボックスは、このほとんど（すべて）に使用することができます。
 
-ただし、Teensy 2.0 ボードを使っている場合は、[Teensy Loader](https:/www.pjrc.comteensyloader.html) を使えば、Teensy 2.0 ボードに書き込むことができます。
-あるいは、`avrdude` (`qmk_install.sh` の一部としてインストールされています) や、[AVRDUDESS](https:/blog.zakkemble.netavrdudess-a-gui-for-avrdude)(Windows 用) を使って、Pro Micro に書き込んだり、ISP を書き込んだりすることができます。
+ただし、Teensy 2.0 ボードを使っている場合は、[Teensy Loader](https://www.pjrc.com/teensy/loader.html) を使えば、Teensy 2.0 ボードに書き込むことができます。
+あるいは、`avrdude` (`qmk_install.sh` の一部としてインストールされています) や、[AVRDUDESS](https://blog.zakkemble.net/avrdudess-a-gui-for-avrdude/) (Windows 用) を使って、Pro Micro に書き込んだり、ISP を書き込んだりすることができます。
 
 ## 配線
 
@@ -93,6 +94,15 @@ QMK ツールボックスは、このほとんど（すべて）に使用する
     PocketAVR VCC  <-> Keyboard VCC
     PocketAVR GND  <-> Keyboard GND
 
+### USBasp
+
+    USBasp RST  <-> Keyboard RESET
+    USBasp SCLK <-> Keyboard B1 (SCLK)
+    USBasp MOSI <-> Keyboard B2 (MOSI)
+    USBasp MISO <-> Keyboard B3 (MISO)
+    USBasp VCC  <-> Keyboard VCC
+    USBasp GND  <-> Keyboard GND
+
 ### Teensy 2.0
 
     Teensy B0  <-> Keyboard RESET
@@ -180,7 +190,7 @@ QMK DFU ブートローダは `atmega32u4` コントローラ (AVR ベースの
 
 ### QMK Toolbox
 
-1. 'AVRISP device connected' または `USB Tiny device connected` が黄色で表示されます。
+1. `AVRISP device connected` または `USB Tiny device connected` が黄色で表示されます。
 2. `Open` ダイアログで正しいブートローダー/プロダクションの .hex ファイルを選択します（パスにスペースを含めることはできません）
 3. 書きこもうとしているキーボード（ISP プログラマではなく）のための正しい `Microcontroller` オプションが選択されていることを確認してください。
 4. `Flash` を押します
@@ -277,7 +287,7 @@ High ヒューズは 0xD9 か 0x99 のどちらかになります。
     avrdude -c avrisp -P COM3 -p atmega32u4 -U flash:w:main.hex:i -U lfuse:w:0xFF:m -U hfuse:w:0xD8:m -U efuse:w:0xCB:m
 
 
-別のコントローラーを使用している場合や、別の設定を希望する場合は、この[AVR ヒューズ計算機](https://www.engbedded.com/fusecalc)を使用して、より適切な値を見つけることができます。
+別のコントローラーを使用している場合や、別の設定を希望する場合は、この[AVR ヒューズ計算機](https://www.engbedded.com/fusecalc/)を使用して、より適切な値を見つけることができます。
 
 ## ヘルプ
 

docs/ja/mod_tap.md

@@ -1,8 +1,8 @@
 # モッドタップ
 
 <!---
-  original document: 0.10.36:docs/mod_tap.md
-  git diff 0.10.36 HEAD -- docs/mod_tap.md | cat
+  original document: 0.13.34:docs/mod_tap.md
+  git diff 0.13.34 HEAD -- docs/mod_tap.md | cat
 -->
 
 モッドタップキー `MT(mod, kc)` は、押したままの時にモディファイアのように機能し、タップされた時に通常のキーのように振舞います。別の言い方をすると、タップした時に Escape を送信しますが、押したままの時に Control あるいは Shift キーとして機能するキーを持つことができます。
@@ -42,7 +42,10 @@ MT(MOD_LCTL | MOD_LSFT, KC_ESC)
 | `RSFT_T(kc)` |                                                                   | 押したままの場合は右 Shift、タップした場合は `kc`                      |
 | `RALT_T(kc)` | `ROPT_T(kc)`, `ALGR_T(kc)`                                        | 押したままの場合は右 Alt、タップした場合は `kc`                        |
 | `RGUI_T(kc)` | `RCMD_T(kc)`, `RWIN_T(kc)`                                        | 押したままの場合は右 GUI、タップした場合は `kc`                        |
-| `SGUI_T(kc)` | `SCMD_T(kc)`, `SWIN_T(kc)`                                        | 押したままの場合は左 Shift と左 GUI、タップした場合は `kc`             |
+| `LSG_T(kc)`  | `SGUI_T(kc)`, `SCMD_T(kc)`, `SWIN_T(kc)`                          | 押したままの場合は左 Shift と左 GUI、タップした場合は `kc`             |
+| `LAG_T(kc)`  |                                                                   | 押したままの場合は左 Alt と左 GUI、タップした場合は `kc`               |
+| `RSG_T(kc)`  |                                                                   | 押したままの場合は右 Shift と右 GUI、タップした場合は `kc`             |
+| `RAG_T(kc)`  |                                                                   | 押したままの場合は右 Alt と右 GUI、タップした場合は `kc`               |
 | `LCA_T(kc)`  |                                                                   | 押したままの場合は左 Control と左 Alt、タップした場合は `kc`           |
 | `LSA_T(kc)`  |                                                                   | 押したままの場合は左 Shift と Alt、タップした場合は `kc`               |
 | `RSA_T(kc)`  | `SAGR_T(kc)`                                                      | 押したままの場合は右 Shift と Alt (AltGr)、タップした場合は `kc`       |
@@ -55,11 +58,13 @@ MT(MOD_LCTL | MOD_LSFT, KC_ESC)
 
 ## 注意事項
 
-残念ながら、キーコードで指定されたモディファイアは無視されるため、これらのキーコードはモッドタップまたはレイヤータップで使うことができません。
+現在のところ、`MT()` の引数 `kc` は[基本的なキーコードセット](ja/keycodes_basic.md)に制限されています。つまり、`LCTL()`、`KC_TILD`、あるいは `0xFF` より大きなキーコードを使うことができません。これは、QMK が16ビットのキーコードを使うためです。3ビットは機能の識別のために使われ、1ビットは右または左の mod を選択するために使われ、4ビットはどの mod かを区別するために使われ、キーコードには8ビットしか残されていません。さらに、モッドタップで少なくとも1つの右手用のモディファイアが指定された場合、指定された全てのモディファイアが右手用になるため、2つをうまく組み合わせて一致させることはできません。例えば、左 Control と右 Shift は、右 Control と右 Shift になります。
 
-さらに、Windows でリモートデスクトップ接続を使う場合に、問題が発生する場合があります。これらのコードはシフトを非常に高速に送信するため、リモートデスクトップはコードを見逃すかもしれません。
+これを拡張してもせいぜい複雑になるだけでしょう。32ビットキーコードに移行すると、これの多くが解決されますが、キーマップマトリックスが使用する領域が2倍になります。また、問題が起きる可能性もあります。タップしたキーコードにモディファイアを適用する必要がある場合は、[タップダンス](ja/feature_tap_dance.md#example-5)を使うことができます。
 
-これを修正するには、リモートデスクトップ接続を開き、「オプションの表示」を開き、「ローカル リソース」タブを開きます。キーボードセクションで、ドロップダウンを「このコンピューター」に変更します。これにより問題が修正され、キャラクタが正しく動作するようになります。
+さらに、Windows でリモートデスクトップ接続を使う場合に、問題が発生する場合があります。なぜならば、これらのキーコードは人よりも速くキーイベントを送信するため、リモートデスクトップがキーコードを見落とすかもしれないからです。
+この問題を解決するには、リモートデスクトップ接続を開いて「オプションの表示」をクリックし、「ローカル リソース」タブを開きます。キーボードセクションで、ドロップダウンを「このコンピューター」に変更します。これで問題が解決され、文字が正しく機能するようになります。
+[`TAP_CODE_DELAY`](ja/config_options.md#behaviors-that-can-be-configured) を増やすことで緩和することもできます。
 
 ## 他のリソース
 

docs/ja/one_shot_keys.md

@@ -1,9 +1,9 @@
 # ワンショットキー
 
 <!---
-  original document: 0.12.41:docs/one_shot_keys.md
-  git diff 0.12.41 HEAD -- docs/one_shot_keys.md | cat
--->
+  original document: 0.13.34:docs/one_shot_keys.md
+  git diff 0.13.34 HEAD -- docs/one_shot_keys.md | cat
+--->
 
 ワンショットキーは次のキーが押されるまでアクティブのままになり、そのあと放されるキーです。これにより一度に1つ以上のキーを押すことなく、キーボードの組み合わせを入力することができます。これらのキーは通常「スティッキーキー」あるいは「デッドキー」と呼ばれます。
 
@@ -22,10 +22,13 @@
 
 * `OSM(mod)` - *mod*を一時的に押し続けます。[モッドタップ](ja/mod_tap.md)で示したように、`KC_*` コードでは無く、`MOD_*` キーコードを使わなければなりません。
 * `OSL(layer)` - 一時的に*レイヤー*に切り替えます。
+* `OS_ON` - ワンショットキーをオンにします。
+* `OS_OFF` - ワンショットキーをオフにします。OSM は通常の mod キーのように機能し、OSL は `MO` キーのように機能します。
+* `OS_TOGG` - ワンショットキーの状態を切り替えます。
 
 ワンショットキーをマクロあるいはタップダンスルーチンの一部として有効にしたい場合があります。
 
-ワンショットレイヤーについては、キーを押した時に `set_oneshot_layer(LAYER, ONESHOT_START)` を呼び出し、キーを放した時に `clear_oneshot_layer_state(ONESHOT_OTHER_KEY_PRESSED)` を呼び出す必要があります。ワンショットをキャンセルする場合は、`reset_oneshot_layer()` を呼び出してください。
+ワンショットレイヤーについては、キーを押した時に `set_oneshot_layer(LAYER, ONESHOT_START)` を呼び出し、キーを放した時に `clear_oneshot_layer_state(ONESHOT_PRESSED)` を呼び出す必要があります。ワンショットをキャンセルする場合は、`reset_oneshot_layer()` を呼び出してください。
 
 ワンショットモッドについては、設定するためには `set_oneshot_mods(MOD_BIT(KC_*))` を呼び出し、キャンセルするためには `clear_oneshot_mods()` を呼び出す必要があります。
 

docs/ja/pr_checklist.md

@@ -1,8 +1,8 @@
 # PR チェックリスト
 
 <!---
-  original document: 0.10.7:docs/pr_checklist.md
-  git diff 0.10.7 HEAD -- docs/pr_checklist.md | cat
+  original document: 0.13.34:docs/pr_checklist.md
+  git diff 0.13.34 HEAD -- docs/pr_checklist.md | cat
 -->
 
 これは、提出された PR を QMK の協力者がレビューする際に何をチェックするのかの非網羅的なチェックリストです。
@@ -73,11 +73,13 @@ https://github.com/qmk/qmk_firmware/pulls?q=is%3Apr+is%3Aclosed+label%3Akeyboard
     - キーボードが QMK で起動するために最低限必要なコードが存在する必要があります
         - マトリックスと重要なデバイスの初期化コード
         - (カスタムキーコードや特別なアニメーションなど)商用キーボードの既存の機能をミラーリングする場合は、`default` ではないキーマップを使って処理する必要があります
+   - Vial 関連のファイルまたは変更は QMK ファームウェアで使用されないため受け入れられません (Vial 固有のコアコードは提出またはマージされていません)
 - `keyboard.c`
     - 空の `xxxx_xxxx_kb()` または他の weak-define のデフォルト実装関数が削除されていること
     - コメントアウトされた関数も削除されていること
     - `matrix_init_board()` などが `keyboard_pre_init_kb()` に移行されました。[keyboard_pre_init*](https://docs.qmk.fm/#/ja/custom_quantum_functions?id=keyboard_pre_init_-function-documentation) を参照してください
     - カスタムマトリックスを使用する場合は、`CUSTOM_MATRIX = lite` を選択し、標準のデバウンスを許可します。[マトリックスコードの部分置き換え](https://docs.qmk.fm/#/ja/custom_matrix?id=lite) を参照してください
+    - 可能な場合は、独自の `led_update_*()` 実装よりも LED インジケータの[設定オプション](https://docs.qmk.fm/#/ja/feature_led_indicators?id=configuration-options)を優先してください。
 - `keyboard.h`
     - 先頭に `#include "quantum.h"` を置きます
     - `LAYOUT` マクロは、該当する場合は標準の定義を使用してください
@@ -95,9 +97,12 @@ https://github.com/qmk/qmk_firmware/pulls?q=is%3Apr+is%3Aclosed+label%3Akeyboard
         ...キーマップの `process_record_user()` 内で `layer_on()`、 `update_tri_layer()` を手動で処理する代わりに。
 - default (および via) のキーマップは「素朴」でなければなりません。
     - 他のユーザーが独自のユーザー固有のキーマップを開発するための「クリーンな状態」として使用するための最低限のもの。
-    - これらのキーマップで推奨される標準レイアウト（可能な場合）
+    - これらのキーマップでは標準のレイアウトが推奨されます（可能な場合）
+    - デフォルトのキーマップは VIA を有効にするべきではありません -- VIA の統合ドキュメント類には `via` という名前のキーマップが必要です。
 - PR の提出者は、同じ PR に機能を紹介する個人的な（または豪華な）キーマップを持たせることができますが、「デフォルト」のキーマップに埋め込むべきではありません
 - PR の提出者はまた、既存の商用キーボードへ QMK を移植する場合、その商用製品の既存の機能を反映する「製造業者に一致する」キーマップを持つことができます
+- PR に VIA の json ファイルを含めないでください。これらは QMK ファームウェアで使われないため QMK リポジトリに属しません -- それらは [VIA のキーボードリポジトリ](https://github.com/the-via/keyboards)に属します。
+
 
 さらに、ChibiOS に固有で:
 - 既存の ChibiOS ボード定義を使用することを**強く**推奨します。
@@ -132,3 +137,9 @@ There are instructions on how to keep your fork updated here:
 
 Thanks for contributing!
 ```
+
+## レビュープロセス
+
+一般的に、PR がマージの対象となる前に、意味のある(例えば、コードを検査した)2つ(またはそれ以上)の承認を確認したいと考えています。これらのレビューはコラボレータに限られません -- 時間を割いてくれるコミュニティメンバーは誰でも歓迎(奨励)されます。唯一の違いは、チェックマークが緑にならないことですが、それは問題ありません。
+
+また、PR レビューは自由な時間に行われるものです。それは好意で行われるものなので、私たちはレビューに費やす時間に対して、報酬はうけとっていませんし埋め合わせもありません。そのため、私たちがあなたのプルリクエストに取り掛かるのには時間がかかります。家族や生活のことで PR に手が回らなくなることもあり、そして燃え尽き症候群は深刻な懸念です。QMK ファームウェアリポジトリは、毎月平均200件の PR が開かれ、200件の PR がマージされますので、しばらくお待ちください。

docs/ja/reference_info_json.md

@@ -25,14 +25,8 @@
 
 ### レイアウトの形式
 
-`info.json` ファイル内の辞書の `layouts` 部分は、幾つかの入れ子になった辞書を含みます。外側のレイヤーは QMK レイアウトマクロで構成されます。例えば、`LAYOUT_ansi` あるいは `LAYOUT_iso`。各レイアウトマクロ内には、`width`、 `height`、`key_count` のキーがあります。これらは自明でなければなりません。
+`info.json` ファイル内の辞書の `layouts` 部分は、幾つかの入れ子になった辞書を含みます。外側のレイヤーは QMK レイアウトマクロで構成されます。例えば、`LAYOUT_ansi` あるいは `LAYOUT_iso`。
 
-* `width`
-   * オプション: キー単位でのレイアウトの幅
-* `height`
-   * オプション: キー単位でのレイアウトの高さ
-* `key_count`
-   * オプション: このレイアウトのキーの数
 * `layout`
    * 物理レイアウトを説明するキー辞書のリスト。詳細は次のセクションを見てください。
 

docs/reference_info_json.md

@@ -32,14 +32,8 @@ The `info.json` file is a JSON formatted dictionary with the following keys avai
 
 ### Layout Format
 
-Within our `info.json` file the `layouts` portion of the dictionary contains several nested dictionaries. The outer layer consists of QMK layout macros, for example `LAYOUT_ansi` or `LAYOUT_iso`. Within each layout macro are keys for `width`, `height`, and `key_count`, each of which should be self-explanatory.
+Within our `info.json` file the `layouts` portion of the dictionary contains several nested dictionaries. The outer layer consists of QMK layout macros, for example `LAYOUT_ansi` or `LAYOUT_iso`.
 
-* `width`
-  * Optional: The width of the layout in Key Units
-* `height`
-  * Optional: The height of the layout in Key Units
-* `key_count`
-  * Optional: The number of keys in this layout
 * `layout`
   * A list of Key Dictionaries describing the physical layout. See the next section for more details.
 

docs/understanding_qmk.md

@@ -4,7 +4,7 @@ This document attempts to explain how the QMK firmware works from a very high le
 
 * [Introduction](getting_started_introduction.md)
 * [How Keyboards Work](how_keyboards_work.md)
-* [FAQ](faq.md)
+* [FAQ](faq_general.md)
 
 ## Startup
 

docs/zh-cn/custom_quantum_functions.md

@@ -275,11 +275,11 @@ void keyboard_post_init_user(void) {
 
 ```c
 void suspend_power_down_user(void) {
-    rgb_matrix_set_suspend_state(true);
+    // code will run multiple times while keyboard is suspended
 }
 
 void suspend_wakeup_init_user(void) {
-    rgb_matrix_set_suspend_state(false);
+    // code will run on keyboard wakeup
 }
 ```
 

drivers/led/issi/is31fl3741.c

@@ -73,7 +73,7 @@ uint8_t g_twi_transfer_buffer[20] = {0xFF};
 // buffers and the transfers in IS31FL3741_write_pwm_buffer() but it's
 // probably not worth the extra complexity.
 uint8_t g_pwm_buffer[DRIVER_COUNT][ISSI_MAX_LEDS];
-bool    g_pwm_buffer_update_required                      = false;
+bool    g_pwm_buffer_update_required[DRIVER_COUNT]        = {false};
 bool    g_scaling_registers_update_required[DRIVER_COUNT] = {false};
 
 uint8_t g_scaling_registers[DRIVER_COUNT][ISSI_MAX_LEDS];
@@ -169,10 +169,10 @@ void IS31FL3741_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {
     if (index >= 0 && index < DRIVER_LED_TOTAL) {
         is31_led led = g_is31_leds[index];
 
-        g_pwm_buffer[led.driver][led.r] = red;
-        g_pwm_buffer[led.driver][led.g] = green;
-        g_pwm_buffer[led.driver][led.b] = blue;
-        g_pwm_buffer_update_required    = true;
+        g_pwm_buffer[led.driver][led.r]          = red;
+        g_pwm_buffer[led.driver][led.g]          = green;
+        g_pwm_buffer[led.driver][led.b]          = blue;
+        g_pwm_buffer_update_required[led.driver] = true;
     }
 }
 
@@ -206,12 +206,12 @@ void IS31FL3741_set_led_control_register(uint8_t index, bool red, bool green, bo
     g_scaling_registers_update_required[led.driver] = true;
 }
 
-void IS31FL3741_update_pwm_buffers(uint8_t addr1, uint8_t addr2) {
-    if (g_pwm_buffer_update_required) {
-        IS31FL3741_write_pwm_buffer(addr1, g_pwm_buffer[0]);
+void IS31FL3741_update_pwm_buffers(uint8_t addr, uint8_t index) {
+    if (g_pwm_buffer_update_required[index]) {
+        IS31FL3741_write_pwm_buffer(addr, g_pwm_buffer[index]);
     }
 
-    g_pwm_buffer_update_required = false;
+    g_pwm_buffer_update_required[index] = false;
 }
 
 void IS31FL3741_set_pwm_buffer(const is31_led *pled, uint8_t red, uint8_t green, uint8_t blue) {
@@ -219,7 +219,7 @@ void IS31FL3741_set_pwm_buffer(const is31_led *pled, uint8_t red, uint8_t green,
     g_pwm_buffer[pled->driver][pled->g] = green;
     g_pwm_buffer[pled->driver][pled->b] = blue;
 
-    g_pwm_buffer_update_required = true;
+    g_pwm_buffer_update_required[pled->driver] = true;
 }
 
 void IS31FL3741_update_led_control_registers(uint8_t addr, uint8_t index) {

drivers/led/issi/is31fl3741.h

@@ -45,8 +45,8 @@ void IS31FL3741_set_led_control_register(uint8_t index, bool red, bool green, bo
 // (eg. from a timer interrupt).
 // Call this while idle (in between matrix scans).
 // If the buffer is dirty, it will update the driver with the buffer.
-void IS31FL3741_update_pwm_buffers(uint8_t addr1, uint8_t addr2);
-void IS31FL3741_update_led_control_registers(uint8_t addr1, uint8_t addr2);
+void IS31FL3741_update_pwm_buffers(uint8_t addr, uint8_t index);
+void IS31FL3741_update_led_control_registers(uint8_t addr, uint8_t index);
 void IS31FL3741_set_scaling_registers(const is31_led *pled, uint8_t red, uint8_t green, uint8_t blue);
 
 void IS31FL3741_set_pwm_buffer(const is31_led *pled, uint8_t red, uint8_t green, uint8_t blue);

keyboards/0_sixty/info.json

@@ -2,8 +2,6 @@
     "keyboard_name": "0-Sixty",
     "url": "",
     "maintainer": "vinamarora8",
-    "width": 12,
-    "height": 5,
     "layouts": {
 	"LAYOUT_1x2uC": {
             "layout": [

keyboards/0_sixty/rules.mk

@@ -17,5 +17,6 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-BLUETOOTH_ENABLE = no       # Enable Bluetooth
 AUDIO_ENABLE = no           # Audio output
+
+LTO_ENABLE = yes            # Link-time opt

keyboards/0_sixty/underglow/config.h

@@ -0,0 +1,62 @@
+/* Copyright 2021 Vinam Arora <vinam@posteo.de>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#undef PRODUCT_ID
+#define PRODUCT_ID      0x0061
+#undef PRODUCT
+#define PRODUCT         0-Sixty-underglow
+
+/* no caps lock with underglow */
+#undef LED_CAPS_LOCK_PIN
+
+/* underglow */
+#define RGB_DI_PIN B6
+#define RGBLED_NUM 24
+#define RGBLIGHT_LIMIT_VAL 185 // limit max I to 400mA 
+#define RGBLIGHT_EFFECT_BREATHING
+#define RGBLIGHT_EFFECT_RAINBOW_MOOD
+#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+#define RGBLIGHT_EFFECT_SNAKE
+#define RGBLIGHT_EFFECT_KNIGHT
+#define RGBLIGHT_EFFECT_CHRISTMAS
+#define RGBLIGHT_EFFECT_STATIC_GRADIENT
+#define RGBLIGHT_EFFECT_RGB_TEST
+#define RGBLIGHT_EFFECT_ALTERNATING
+#define RGBLIGHT_EFFECT_TWINKLE
+#define RGBLIGHT 
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+#define NO_DEBUG
+
+/* disable print */
+#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION

keyboards/0_sixty/underglow/rules.mk

@@ -0,0 +1 @@
+RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow

keyboards/0_sixty/underglow/underglow.h

@@ -0,0 +1,19 @@
+/* Copyright 2021 Vinam Arora <vinam@posteo.de>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "0_sixty.h"

keyboards/0xc7/61key/rules.mk

@@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-BLUETOOTH_ENABLE = no       # Enable Bluetooth
 AUDIO_ENABLE = no           # Audio output
 
 LTO_ENABLE = yes

keyboards/0xcb/1337/info.json

@@ -2,8 +2,6 @@
   "keyboard_name": "0xCB 1337",
   "url": "https://0xCB.dev",
   "maintainer": "Conor-Burns",
-  "width": 3,
-  "height": 3,
   "layouts": {
     "LAYOUT": {
       "layout": [

keyboards/0xcb/1337/rules.mk

@@ -16,10 +16,8 @@ COMMAND_ENABLE = no	        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth
 AUDIO_ENABLE = no           # Audio output
 
 ENCODER_ENABLE = yes

keyboards/0xcb/static/info.json

@@ -2,8 +2,6 @@
   "keyboard_name": "0xCB Static",
   "url": "https://0xCB.dev",
   "maintainer": "Conor-Burns",
-  "width": 12,
-  "height": 5,
   "layout_aliases": {
     "LAYOUT": "LAYOUT_all"
   },

keyboards/0xcb/static/rules.mk

@@ -2,7 +2,7 @@
 MCU = atmega328p
 
 # Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
 
 # Build Options
 #   change yes to no to disable
@@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-BLUETOOTH_ENABLE = no       # Enable Bluetooth
 AUDIO_ENABLE = no           # Audio output
 
 ENCODER_ENABLE = yes

keyboards/10bleoledhub/info.json

@@ -2,9 +2,6 @@
     "keyboard_name": "10bleoledhub",
     "url": "https://github.com/haierwangwei2005/10BLE-OLED-HUB",
     "maintainer": "haierwangwei2005",
-
-    "width": 4,
-    "height": 3,
     "layouts": {
         "LAYOUT": {
             "layout": [

keyboards/1upkeyboards/1up60hse/config.h

@@ -100,54 +100,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 //#define FORCE_NKRO
 
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1          H
-//#define MAGIC_KEY_HELP2          SLASH
-//#define MAGIC_KEY_DEBUG          D
-//#define MAGIC_KEY_DEBUG_MATRIX   X
-//#define MAGIC_KEY_DEBUG_KBD      K
-//#define MAGIC_KEY_DEBUG_MOUSE    M
-//#define MAGIC_KEY_VERSION        V
-//#define MAGIC_KEY_STATUS         S
-//#define MAGIC_KEY_CONSOLE        C
-//#define MAGIC_KEY_LAYER0_ALT1    ESC
-//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
-//#define MAGIC_KEY_LAYER0         0
-//#define MAGIC_KEY_LAYER1         1
-//#define MAGIC_KEY_LAYER2         2
-//#define MAGIC_KEY_LAYER3         3
-//#define MAGIC_KEY_LAYER4         4
-//#define MAGIC_KEY_LAYER5         5
-//#define MAGIC_KEY_LAYER6         6
-//#define MAGIC_KEY_LAYER7         7
-//#define MAGIC_KEY_LAYER8         8
-//#define MAGIC_KEY_LAYER9         9
-//#define MAGIC_KEY_BOOTLOADER     PAUSE
-//#define MAGIC_KEY_LOCK           CAPS
-//#define MAGIC_KEY_EEPROM         E
-//#define MAGIC_KEY_NKRO           N
-//#define MAGIC_KEY_SLEEP_LED      Z
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.

keyboards/1upkeyboards/1up60hse/info.json

@@ -2,8 +2,6 @@
     "keyboard_name": "1up60hse",
     "url": "",
     "maintainer": "qmk",
-    "width": 15,
-    "height": 5,
     "layouts": {
         "LAYOUT_60_ansi": {
             "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]

keyboards/1upkeyboards/1up60hse/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
 
 # Build Options
@@ -25,9 +18,7 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes            # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
+AUDIO_ENABLE = no           # Audio output
 EXTRAFLAGS += -flto
 
 LAYOUTS = 60_ansi

keyboards/1upkeyboards/1up60hte/info.json

@@ -2,8 +2,6 @@
     "keyboard_name": "1up60hte",
     "url": "https://www.1upkeyboards.com/shop/controllers/1up-rgb-60-pcb-hte/",
     "maintainer": "1upkeyboards",
-    "width": 15,
-    "height": 5,
     "layout_aliases": {
         "LAYOUT_tsangan": "LAYOUT_60_tsangan_hhkb"
     },

keyboards/1upkeyboards/1up60hte/rules.mk

@@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
-BLUETOOTH_ENABLE = no       # Enable Bluetooth
 AUDIO_ENABLE = no           # Audio output
 
 LTO_ENABLE = yes

keyboards/1upkeyboards/1up60rgb/info.json

@@ -2,8 +2,6 @@
   "keyboard_name": "1up60rgb",
   "url": "",
   "maintainer": "qmk",
-  "width": 15,
-  "height": 5,
   "layouts": {
     "LAYOUT_all": {
       "layout": [

keyboards/1upkeyboards/1up60rgb/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
 
 # Build Options

keyboards/1upkeyboards/super16/config.h

@@ -125,58 +125,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 //#define FORCE_NKRO
 
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* key combination for magic key command */
-/* defined by default; to change, uncomment and set to the combination you want */
-// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1          H
-//#define MAGIC_KEY_HELP2          SLASH
-//#define MAGIC_KEY_DEBUG          D
-//#define MAGIC_KEY_DEBUG_MATRIX   X
-//#define MAGIC_KEY_DEBUG_KBD      K
-//#define MAGIC_KEY_DEBUG_MOUSE    M
-//#define MAGIC_KEY_VERSION        V
-//#define MAGIC_KEY_STATUS         S
-//#define MAGIC_KEY_CONSOLE        C
-//#define MAGIC_KEY_LAYER0_ALT1    ESC
-//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
-//#define MAGIC_KEY_LAYER0         0
-//#define MAGIC_KEY_LAYER1         1
-//#define MAGIC_KEY_LAYER2         2
-//#define MAGIC_KEY_LAYER3         3
-//#define MAGIC_KEY_LAYER4         4
-//#define MAGIC_KEY_LAYER5         5
-//#define MAGIC_KEY_LAYER6         6
-//#define MAGIC_KEY_LAYER7         7
-//#define MAGIC_KEY_LAYER8         8
-//#define MAGIC_KEY_LAYER9         9
-//#define MAGIC_KEY_BOOTLOADER     PAUSE
-//#define MAGIC_KEY_LOCK           CAPS
-//#define MAGIC_KEY_EEPROM         E
-//#define MAGIC_KEY_NKRO           N
-//#define MAGIC_KEY_SLEEP_LED      Z
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.

keyboards/1upkeyboards/super16/info.json

@@ -2,8 +2,6 @@
   "keyboard_name": "super16",
   "url": "",
   "maintainer": "qmk",
-  "width": 4,
-  "height": 4,
   "layouts": {
     "LAYOUT_ortho_4x4": {
       "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}]

keyboards/1upkeyboards/super16/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
 # Build Options
@@ -23,12 +16,10 @@ COMMAND_ENABLE = no         # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no       # Enable keyboard RGB underglow
 RGB_MATRIX_ENABLE = yes
 RGB_MATRIX_DRIVER = WS2812
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
+AUDIO_ENABLE = no           # Audio output
 
 LAYOUTS = ortho_4x4 numpad_4x4

keyboards/1upkeyboards/sweet16/info.json

@@ -2,8 +2,6 @@
   "keyboard_name": "Sweet 16",
   "url": "",
   "maintainer": "skullydazed",
-  "width": 4,
-  "height": 4,
   "layouts": {
       "LAYOUT_ortho_4x4": {
           "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}]

keyboards/1upkeyboards/sweet16/v1/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
 RGBLIGHT_ENABLE = yes

keyboards/1upkeyboards/sweet16/v2/promicro/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
 ## Features

keyboards/2key2crawl/info.json

@@ -2,8 +2,6 @@
     "keyboard_name": "2Key2CrawlPad",
     "url": "",
     "maintainer": "qmk",
-    "width": 6.5,
-    "height": 2,
     "layouts": {
         "LAYOUT": {
             "layout": [

keyboards/2key2crawl/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u2
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
 
 # Build Options

keyboards/30wer/info.json

@@ -2,8 +2,6 @@
     "keyboard_name": "30wer", 
     "url": "", 
     "maintainer": "qmk", 
-    "width": 13.25, 
-    "height": 3, 
     "layouts": {
         "LAYOUT": {
             "layout": [

keyboards/30wer/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
 # Build Options
@@ -23,6 +16,4 @@ COMMAND_ENABLE = no         # Commands for debug and configuration
 NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 AUDIO_ENABLE = no           # Audio output
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 RGBLIGHT_ENABLE = no 		# Enable WS2812 RGB underlight.

keyboards/3keyecosystem/2key2/2key2.c

@@ -0,0 +1,35 @@
+/*
+Copyright 2021 John Mueller
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "2key2.h"
+
+// RGB Matrix configuration
+// based on https://docs.qmk.fm/#/feature_rgb_matrix?id=common-configuration
+
+#ifdef RGB_MATRIX_ENABLE
+led_config_t g_led_config = { {
+  // Key Matrix to LED Index
+  {   0, 1 }
+}, {
+  // LED Index to Physical Position
+  // Using range { 0..224, 0..64 }
+  { 0,  32 }, { 224,  32 }
+}, {
+  // LED Index to Flag
+  // https://docs.qmk.fm/#/feature_rgb_matrix?id=flags
+  LED_FLAG_ALL, LED_FLAG_ALL
+} };
+#endif

keyboards/3keyecosystem/2key2/2key2.h

@@ -0,0 +1,33 @@
+/*
+Copyright 2021 John Mueller
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    k00, k01 \
+) { \
+    { k00, k01 }  \
+}

keyboards/3keyecosystem/2key2/config.h

@@ -0,0 +1,59 @@
+/*
+Copyright 2021 John Mueller
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0x1209
+#define PRODUCT_ID   0x3304
+#define DEVICE_VER   0x0001
+#define MANUFACTURER 3-Key-Ecosystem
+#define PRODUCT      2key2
+
+/* key matrix size */
+#define MATRIX_ROWS 1
+#define MATRIX_COLS 2
+
+/* Keyboard Matrix Assignments */
+#define MATRIX_ROW_PINS { F6 }
+#define MATRIX_COL_PINS { F4, D7 }
+#define UNUSED_PINS
+
+// LED on kbmount base board is on B7
+#define LED_CAPS_LOCK_PIN B7 // onboard LED for testing
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* RGB matrix key backlighting */
+#define RGB_DI_PIN B2
+#define DRIVER_LED_TOTAL 2
+#define RGB_MATRIX_KEYPRESSES
+#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_REACTIVE
+#define RGB_MATRIX_STARTUP_HUE 90
+#define RGB_MATRIX_STARTUP_SPD 20
+#define RGB_MATRIX_STARTUP_VAL 128
+#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+#define RGB_DISABLE_WHEN_USB_SUSPENDED true
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION

keyboards/3keyecosystem/2key2/info.json

@@ -0,0 +1,13 @@
+{
+    "keyboard_name": "3-Key-Ecosystem 2key2: 2x1 macro-keyboard",
+    "url": "https://github.com/softplus/3keyecosystem/tree/main/2key2",
+    "maintainer": "softplus",
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"label": "k00", "x": 0, "y": 0},
+                {"label": "k01", "x": 1, "y": 0}
+            ]
+        }
+    }
+}

keyboards/3keyecosystem/2key2/keymaps/default/keymap.c

@@ -0,0 +1,40 @@
+/* Copyright 2021 John Mueller
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Base */
+    [_BASE] = LAYOUT(
+        KC_A,    KC_B
+    ),
+
+    [1] = LAYOUT(
+        KC_TRNS, KC_TRNS
+    ),
+
+    [2] = LAYOUT(
+        KC_TRNS, KC_TRNS
+    ),
+
+    [3] = LAYOUT(
+        KC_TRNS, KC_TRNS
+    )
+};

keyboards/3keyecosystem/2key2/keymaps/via/keymap.c

@@ -0,0 +1,40 @@
+/* Copyright 2021 John Mueller
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Base */
+    [_BASE] = LAYOUT(
+        KC_A,    KC_B
+    ),
+
+    [1] = LAYOUT(
+        KC_TRNS, KC_TRNS
+    ),
+
+    [2] = LAYOUT(
+        KC_TRNS, KC_TRNS
+    ),
+
+    [3] = LAYOUT(
+        KC_TRNS, KC_TRNS
+    )
+  };

keyboards/3keyecosystem/2key2/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/3keyecosystem/2key2/readme.md

@@ -0,0 +1,24 @@
+# 3-Key-Ecosystem - 2key2
+
+![keyboard](https://i.imgur.com/IJ1Zyc7.jpeg)
+
+This is a 2x1 macro keyboard with WS2812B key lighting.
+It's designed for a modular keyboard mount using an ATmega32U4.
+
+* Keyboard Maintainer: [softplus](https://github.com/softplus)
+* Hardware Supported: [3keyecosystem-2key2](https://github.com/softplus/3keyecosystem/tree/main/2key2)
+* Hardware Availability: Open-Source files at above link
+
+Make example for this keyboard (after setting up your build environment):
+
+    make 3keyecosystem/2key2:default
+
+Flashing example for this keyboard:
+
+    make 3keyecosystem/2key2:default:flash
+
+## Bootloader
+
+To Enter the bootloader, click reset button on the main board.
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/3keyecosystem/2key2/rules.mk

@@ -0,0 +1,23 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+RGB_MATRIX_ENABLE = yes		# Enable RGB matrix
+RGB_MATRIX_DRIVER = WS2812	# Select WS2812 driver for RGB matrix
+AUDIO_ENABLE = no           # Audio output

keyboards/3w6/info.json

@@ -2,8 +2,6 @@
     "keyboard_name": "3w6",
     "url": "https://github.com/weteor/3W6/",
     "maintainer": "weteor",
-    "width": 13,
-    "height": 5,
     "layouts": {
         "LAYOUT": {
             "layout": [

keyboards/3w6/rev1/rules.mk

@@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-BLUETOOTH_ENABLE = no       # Enable Bluetooth
 AUDIO_ENABLE = no           # Audio output
 UNICODE_ENABLE = yes
 CUSTOM_MATRIX = lite

keyboards/3w6/rev2/rules.mk

@@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-BLUETOOTH_ENABLE = no       # Enable Bluetooth
 AUDIO_ENABLE = no           # Audio output
 UNICODE_ENABLE = yes
 CUSTOM_MATRIX = lite

keyboards/40percentclub/25/config.h

@@ -108,54 +108,6 @@
  */
 //#define FORCE_NKRO
 
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1          H
-//#define MAGIC_KEY_HELP2          SLASH
-//#define MAGIC_KEY_DEBUG          D
-//#define MAGIC_KEY_DEBUG_MATRIX   X
-//#define MAGIC_KEY_DEBUG_KBD      K
-//#define MAGIC_KEY_DEBUG_MOUSE    M
-//#define MAGIC_KEY_VERSION        V
-//#define MAGIC_KEY_STATUS         S
-//#define MAGIC_KEY_CONSOLE        C
-//#define MAGIC_KEY_LAYER0_ALT1    ESC
-//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
-//#define MAGIC_KEY_LAYER0         0
-//#define MAGIC_KEY_LAYER1         1
-//#define MAGIC_KEY_LAYER2         2
-//#define MAGIC_KEY_LAYER3         3
-//#define MAGIC_KEY_LAYER4         4
-//#define MAGIC_KEY_LAYER5         5
-//#define MAGIC_KEY_LAYER6         6
-//#define MAGIC_KEY_LAYER7         7
-//#define MAGIC_KEY_LAYER8         8
-//#define MAGIC_KEY_LAYER9         9
-//#define MAGIC_KEY_BOOTLOADER     PAUSE
-//#define MAGIC_KEY_LOCK           CAPS
-//#define MAGIC_KEY_EEPROM         E
-//#define MAGIC_KEY_NKRO           N
-//#define MAGIC_KEY_SLEEP_LED      Z
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.

keyboards/40percentclub/25/info.json

@@ -2,11 +2,8 @@
     "keyboard_name": "foobar",
     "url": "",
     "maintainer": "qmk",
-    "width": 6,
-    "height": 2,
     "layouts": {
         "LAYOUT_ortho_5x5": {
-            "key_count": 15,
             "layout": [
               {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0},
               {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1},
@@ -16,7 +13,6 @@
           ]
         },
         "LAYOUT_ortho_5x10": {
-            "key_count": 30,
             "layout": [
               {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0},
               {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1},

keyboards/40percentclub/25/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
 # Build Options
@@ -23,11 +16,9 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
+AUDIO_ENABLE = no           # Audio output
 
 # Enable generic behavior for split boards
 SPLIT_KEYBOARD = yes

keyboards/40percentclub/4pack/config.h

@@ -129,59 +129,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 //#define FORCE_NKRO
 
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* key combination for magic key command */
-/* defined by default; to change, uncomment and set to the combination you want */
-// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP           H
-//#define MAGIC_KEY_HELP_ALT       SLASH
-//#define MAGIC_KEY_DEBUG          D
-//#define MAGIC_KEY_DEBUG_MATRIX   X
-//#define MAGIC_KEY_DEBUG_KBD      K
-//#define MAGIC_KEY_DEBUG_MOUSE    M
-//#define MAGIC_KEY_VERSION        V
-//#define MAGIC_KEY_STATUS         S
-//#define MAGIC_KEY_CONSOLE        C
-//#define MAGIC_KEY_LAYER0         0
-//#define MAGIC_KEY_LAYER0_ALT     GRAVE
-//#define MAGIC_KEY_LAYER1         1
-//#define MAGIC_KEY_LAYER2         2
-//#define MAGIC_KEY_LAYER3         3
-//#define MAGIC_KEY_LAYER4         4
-//#define MAGIC_KEY_LAYER5         5
-//#define MAGIC_KEY_LAYER6         6
-//#define MAGIC_KEY_LAYER7         7
-//#define MAGIC_KEY_LAYER8         8
-//#define MAGIC_KEY_LAYER9         9
-//#define MAGIC_KEY_BOOTLOADER     B
-//#define MAGIC_KEY_BOOTLOADER_ALT ESC
-//#define MAGIC_KEY_LOCK           CAPS
-//#define MAGIC_KEY_EEPROM         E
-//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
-//#define MAGIC_KEY_NKRO           N
-//#define MAGIC_KEY_SLEEP_LED      Z
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.

keyboards/40percentclub/4pack/info.json

@@ -2,11 +2,9 @@
     "keyboard_name": "4pack", 
     "url": "", 
     "maintainer": "qmk", 
-    "width": 4, 
-    "height": 1, 
     "layouts": {
         "LAYOUT": {
             "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}]
         }
     }
-}
+}

keyboards/40percentclub/4pack/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
 # Build Options
@@ -25,6 +18,4 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
+AUDIO_ENABLE = no           # Audio output

keyboards/40percentclub/4x4/config.h

@@ -75,54 +75,6 @@
  */
 //#define FORCE_NKRO
 
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1          H
-//#define MAGIC_KEY_HELP2          SLASH
-//#define MAGIC_KEY_DEBUG          D
-//#define MAGIC_KEY_DEBUG_MATRIX   X
-//#define MAGIC_KEY_DEBUG_KBD      K
-//#define MAGIC_KEY_DEBUG_MOUSE    M
-//#define MAGIC_KEY_VERSION        V
-//#define MAGIC_KEY_STATUS         S
-//#define MAGIC_KEY_CONSOLE        C
-//#define MAGIC_KEY_LAYER0_ALT1    ESC
-//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
-//#define MAGIC_KEY_LAYER0         0
-//#define MAGIC_KEY_LAYER1         1
-//#define MAGIC_KEY_LAYER2         2
-//#define MAGIC_KEY_LAYER3         3
-//#define MAGIC_KEY_LAYER4         4
-//#define MAGIC_KEY_LAYER5         5
-//#define MAGIC_KEY_LAYER6         6
-//#define MAGIC_KEY_LAYER7         7
-//#define MAGIC_KEY_LAYER8         8
-//#define MAGIC_KEY_LAYER9         9
-//#define MAGIC_KEY_BOOTLOADER     PAUSE
-//#define MAGIC_KEY_LOCK           CAPS
-//#define MAGIC_KEY_EEPROM         E
-//#define MAGIC_KEY_NKRO           N
-//#define MAGIC_KEY_SLEEP_LED      Z
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.

keyboards/40percentclub/4x4/info.json

@@ -2,8 +2,6 @@
     "keyboard_name": "40percent.club 4x4",
     "url": "",
     "maintainer": "qmk",
-    "height": 4,
-    "width": 4,
     "layouts": {
         "LAYOUT_ortho_4x4": {
             "layout": [

keyboards/40percentclub/4x4/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
 # Build Options
@@ -23,10 +16,8 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+AUDIO_ENABLE = no           # Audio output
 
 LAYOUTS = ortho_4x4 ortho_4x12
 

keyboards/40percentclub/5x5/config.h

@@ -84,54 +84,6 @@
  */
 //#define FORCE_NKRO
 
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1          H
-//#define MAGIC_KEY_HELP2          SLASH
-//#define MAGIC_KEY_DEBUG          D
-//#define MAGIC_KEY_DEBUG_MATRIX   X
-//#define MAGIC_KEY_DEBUG_KBD      K
-//#define MAGIC_KEY_DEBUG_MOUSE    M
-//#define MAGIC_KEY_VERSION        V
-//#define MAGIC_KEY_STATUS         S
-//#define MAGIC_KEY_CONSOLE        C
-//#define MAGIC_KEY_LAYER0_ALT1    ESC
-//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
-//#define MAGIC_KEY_LAYER0         0
-//#define MAGIC_KEY_LAYER1         1
-//#define MAGIC_KEY_LAYER2         2
-//#define MAGIC_KEY_LAYER3         3
-//#define MAGIC_KEY_LAYER4         4
-//#define MAGIC_KEY_LAYER5         5
-//#define MAGIC_KEY_LAYER6         6
-//#define MAGIC_KEY_LAYER7         7
-//#define MAGIC_KEY_LAYER8         8
-//#define MAGIC_KEY_LAYER9         9
-//#define MAGIC_KEY_BOOTLOADER     PAUSE
-//#define MAGIC_KEY_LOCK           CAPS
-//#define MAGIC_KEY_EEPROM         E
-//#define MAGIC_KEY_NKRO           N
-//#define MAGIC_KEY_SLEEP_LED      Z
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.

keyboards/40percentclub/5x5/info.json

@@ -2,8 +2,6 @@
     "keyboard_name": "40percent.club 5x5",
     "url": "",
     "maintainer": "qmk",
-    "height": 4,
-    "width": 4,
     "layouts": {
         "LAYOUT_ortho_5x5": {
             "layout": [

keyboards/40percentclub/5x5/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
 # Build Options
@@ -24,8 +17,6 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard RGB underglow
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
+AUDIO_ENABLE = no           # Audio output
 
 LAYOUTS = ortho_5x15

keyboards/40percentclub/6lit/config.h

@@ -109,54 +109,6 @@
  */
 //#define FORCE_NKRO
 
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1          H
-//#define MAGIC_KEY_HELP2          SLASH
-//#define MAGIC_KEY_DEBUG          D
-//#define MAGIC_KEY_DEBUG_MATRIX   X
-//#define MAGIC_KEY_DEBUG_KBD      K
-//#define MAGIC_KEY_DEBUG_MOUSE    M
-//#define MAGIC_KEY_VERSION        V
-//#define MAGIC_KEY_STATUS         S
-//#define MAGIC_KEY_CONSOLE        C
-//#define MAGIC_KEY_LAYER0_ALT1    ESC
-//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
-//#define MAGIC_KEY_LAYER0         0
-//#define MAGIC_KEY_LAYER1         1
-//#define MAGIC_KEY_LAYER2         2
-//#define MAGIC_KEY_LAYER3         3
-//#define MAGIC_KEY_LAYER4         4
-//#define MAGIC_KEY_LAYER5         5
-//#define MAGIC_KEY_LAYER6         6
-//#define MAGIC_KEY_LAYER7         7
-//#define MAGIC_KEY_LAYER8         8
-//#define MAGIC_KEY_LAYER9         9
-//#define MAGIC_KEY_BOOTLOADER     PAUSE
-//#define MAGIC_KEY_LOCK           CAPS
-//#define MAGIC_KEY_EEPROM         E
-//#define MAGIC_KEY_NKRO           N
-//#define MAGIC_KEY_SLEEP_LED      Z
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.

keyboards/40percentclub/6lit/info.json

@@ -2,18 +2,14 @@
     "keyboard_name": "6lit",
     "url": "",
     "maintainer": "qmk",
-    "width": 6,
-    "height": 2,
     "layouts": {
         "LAYOUT_ortho_2x3": {
-            "key_count": 6,
             "layout": [
               {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0},
               {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}
             ]
         },
         "LAYOUT_ortho_2x6": {
-            "key_count": 12,
             "layout": [
               {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0},
               {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}

keyboards/40percentclub/6lit/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
 # Build Options
@@ -23,11 +16,9 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
+AUDIO_ENABLE = no           # Audio output
 
 # Enable generic behavior for split boards
 SPLIT_KEYBOARD = yes

keyboards/40percentclub/foobar/config.h

@@ -109,54 +109,6 @@
  */
 //#define FORCE_NKRO
 
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1          H
-//#define MAGIC_KEY_HELP2          SLASH
-//#define MAGIC_KEY_DEBUG          D
-//#define MAGIC_KEY_DEBUG_MATRIX   X
-//#define MAGIC_KEY_DEBUG_KBD      K
-//#define MAGIC_KEY_DEBUG_MOUSE    M
-//#define MAGIC_KEY_VERSION        V
-//#define MAGIC_KEY_STATUS         S
-//#define MAGIC_KEY_CONSOLE        C
-//#define MAGIC_KEY_LAYER0_ALT1    ESC
-//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
-//#define MAGIC_KEY_LAYER0         0
-//#define MAGIC_KEY_LAYER1         1
-//#define MAGIC_KEY_LAYER2         2
-//#define MAGIC_KEY_LAYER3         3
-//#define MAGIC_KEY_LAYER4         4
-//#define MAGIC_KEY_LAYER5         5
-//#define MAGIC_KEY_LAYER6         6
-//#define MAGIC_KEY_LAYER7         7
-//#define MAGIC_KEY_LAYER8         8
-//#define MAGIC_KEY_LAYER9         9
-//#define MAGIC_KEY_BOOTLOADER     PAUSE
-//#define MAGIC_KEY_LOCK           CAPS
-//#define MAGIC_KEY_EEPROM         E
-//#define MAGIC_KEY_NKRO           N
-//#define MAGIC_KEY_SLEEP_LED      Z
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.

keyboards/40percentclub/foobar/info.json

@@ -2,11 +2,8 @@
     "keyboard_name": "foobar",
     "url": "",
     "maintainer": "qmk",
-    "width": 10,
-    "height": 3,
     "layouts": {
         "LAYOUT_ortho_3x5": {
-            "key_count": 15,
             "layout": [
               {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0},
               {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1},
@@ -14,7 +11,6 @@
             ]
         },
         "LAYOUT_ortho_3x10": {
-            "key_count": 30,
             "layout": [
               {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0},
               {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1},

keyboards/40percentclub/foobar/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
 # Build Options
@@ -23,11 +16,9 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
+AUDIO_ENABLE = no           # Audio output
 
 # Enable generic behavior for split boards
 SPLIT_KEYBOARD = yes

keyboards/40percentclub/gherkin/info.json

@@ -2,11 +2,8 @@
   "keyboard_name": "Gherkin",
   "url": "",
   "maintainer": "qmk",
-  "width": 10,
-  "height": 3,
   "layouts": {
     "LAYOUT_ortho_3x10": {
-      "key_count": 30,
       "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}]
     }
   }

keyboards/40percentclub/gherkin/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
 # Build Options

keyboards/40percentclub/half_n_half/config.h

@@ -118,58 +118,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 //#define FORCE_NKRO
 
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* key combination for magic key command */
-/* defined by default; to change, uncomment and set to the combination you want */
-// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1          H
-//#define MAGIC_KEY_HELP2          SLASH
-//#define MAGIC_KEY_DEBUG          D
-//#define MAGIC_KEY_DEBUG_MATRIX   X
-//#define MAGIC_KEY_DEBUG_KBD      K
-//#define MAGIC_KEY_DEBUG_MOUSE    M
-//#define MAGIC_KEY_VERSION        V
-//#define MAGIC_KEY_STATUS         S
-//#define MAGIC_KEY_CONSOLE        C
-//#define MAGIC_KEY_LAYER0_ALT1    ESC
-//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
-//#define MAGIC_KEY_LAYER0         0
-//#define MAGIC_KEY_LAYER1         1
-//#define MAGIC_KEY_LAYER2         2
-//#define MAGIC_KEY_LAYER3         3
-//#define MAGIC_KEY_LAYER4         4
-//#define MAGIC_KEY_LAYER5         5
-//#define MAGIC_KEY_LAYER6         6
-//#define MAGIC_KEY_LAYER7         7
-//#define MAGIC_KEY_LAYER8         8
-//#define MAGIC_KEY_LAYER9         9
-//#define MAGIC_KEY_BOOTLOADER     PAUSE
-//#define MAGIC_KEY_LOCK           CAPS
-//#define MAGIC_KEY_EEPROM         E
-//#define MAGIC_KEY_NKRO           N
-//#define MAGIC_KEY_SLEEP_LED      Z
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.

keyboards/40percentclub/half_n_half/info.json

@@ -2,11 +2,8 @@
   "keyboard_name": "half_n_half",
   "url": "",
   "maintainer": "qmk",
-  "width": 14,
-  "height": 4,
   "layouts": {
     "LAYOUT": {
-      "key_count": 44,
       "layout": [
           {"label":"L00", "x":0, "y":0},
           {"label":"L01", "x":1, "y":0},
@@ -59,4 +56,3 @@
     }
   }
 }
-  

keyboards/40percentclub/half_n_half/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
 # Build Options
@@ -23,11 +16,9 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
+AUDIO_ENABLE = no           # Audio output
 
 # Enable generic behavior for split boards
 SPLIT_KEYBOARD = yes